models.go

package storsimple

// Copyright (c) Microsoft and contributors.  All rights reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
// http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
//
// See the License for the specific language governing permissions and
// limitations under the License.
//
// Code generated by Microsoft (R) AutoRest Code Generator.
// Changes may cause incorrect behavior and will be lost if the code is regenerated.

import (
	"encoding/json"
	"github.com/Azure/go-autorest/autorest"
	"github.com/Azure/go-autorest/autorest/azure"
	"github.com/Azure/go-autorest/autorest/date"
	"github.com/Azure/go-autorest/autorest/to"
	"net/http"
)

// AlertEmailNotificationStatus enumerates the values for alert email notification status.
type AlertEmailNotificationStatus string

const (
	// Disabled ...
	Disabled AlertEmailNotificationStatus = "Disabled"
	// Enabled ...
	Enabled AlertEmailNotificationStatus = "Enabled"
)

// AlertScope enumerates the values for alert scope.
type AlertScope string

const (
	// AlertScopeDevice ...
	AlertScopeDevice AlertScope = "Device"
	// AlertScopeResource ...
	AlertScopeResource AlertScope = "Resource"
)

// AlertSeverity enumerates the values for alert severity.
type AlertSeverity string

const (
	// Critical ...
	Critical AlertSeverity = "Critical"
	// Informational ...
	Informational AlertSeverity = "Informational"
	// Warning ...
	Warning AlertSeverity = "Warning"
)

// AlertSourceType enumerates the values for alert source type.
type AlertSourceType string

const (
	// AlertSourceTypeDevice ...
	AlertSourceTypeDevice AlertSourceType = "Device"
	// AlertSourceTypeResource ...
	AlertSourceTypeResource AlertSourceType = "Resource"
)

// AlertStatus enumerates the values for alert status.
type AlertStatus string

const (
	// Active ...
	Active AlertStatus = "Active"
	// Cleared ...
	Cleared AlertStatus = "Cleared"
)

// AuthenticationType enumerates the values for authentication type.
type AuthenticationType string

const (
	// Basic ...
	Basic AuthenticationType = "Basic"
	// Invalid ...
	Invalid AuthenticationType = "Invalid"
	// None ...
	None AuthenticationType = "None"
	// NTLM ...
	NTLM AuthenticationType = "NTLM"
)

// AuthorizationEligibility enumerates the values for authorization eligibility.
type AuthorizationEligibility string

const (
	// Eligible ...
	Eligible AuthorizationEligibility = "Eligible"
	// InEligible ...
	InEligible AuthorizationEligibility = "InEligible"
)

// AuthorizationStatus enumerates the values for authorization status.
type AuthorizationStatus string

const (
	// AuthorizationStatusDisabled ...
	AuthorizationStatusDisabled AuthorizationStatus = "Disabled"
	// AuthorizationStatusEnabled ...
	AuthorizationStatusEnabled AuthorizationStatus = "Enabled"
)

// BackupJobCreationType enumerates the values for backup job creation type.
type BackupJobCreationType string

const (
	// Adhoc ...
	Adhoc BackupJobCreationType = "Adhoc"
	// BySchedule ...
	BySchedule BackupJobCreationType = "BySchedule"
	// BySSM ...
	BySSM BackupJobCreationType = "BySSM"
)

// BackupPolicyCreationType enumerates the values for backup policy creation type.
type BackupPolicyCreationType string

const (
	// BackupPolicyCreationTypeBySaaS ...
	BackupPolicyCreationTypeBySaaS BackupPolicyCreationType = "BySaaS"
	// BackupPolicyCreationTypeBySSM ...
	BackupPolicyCreationTypeBySSM BackupPolicyCreationType = "BySSM"
)

// BackupStatus enumerates the values for backup status.
type BackupStatus string

const (
	// BackupStatusDisabled ...
	BackupStatusDisabled BackupStatus = "Disabled"
	// BackupStatusEnabled ...
	BackupStatusEnabled BackupStatus = "Enabled"
)

// BackupType enumerates the values for backup type.
type BackupType string

const (
	// CloudSnapshot ...
	CloudSnapshot BackupType = "CloudSnapshot"
	// LocalSnapshot ...
	LocalSnapshot BackupType = "LocalSnapshot"
)

// ControllerID enumerates the values for controller id.
type ControllerID string

const (
	// ControllerIDController0 ...
	ControllerIDController0 ControllerID = "Controller0"
	// ControllerIDController1 ...
	ControllerIDController1 ControllerID = "Controller1"
	// ControllerIDNone ...
	ControllerIDNone ControllerID = "None"
	// ControllerIDUnknown ...
	ControllerIDUnknown ControllerID = "Unknown"
)

// ControllerPowerStateAction enumerates the values for controller power state action.
type ControllerPowerStateAction string

const (
	// Restart ...
	Restart ControllerPowerStateAction = "Restart"
	// Shutdown ...
	Shutdown ControllerPowerStateAction = "Shutdown"
	// Start ...
	Start ControllerPowerStateAction = "Start"
)

// ControllerStatus enumerates the values for controller status.
type ControllerStatus string

const (
	// ControllerStatusFailure ...
	ControllerStatusFailure ControllerStatus = "Failure"
	// ControllerStatusNotPresent ...
	ControllerStatusNotPresent ControllerStatus = "NotPresent"
	// ControllerStatusOk ...
	ControllerStatusOk ControllerStatus = "Ok"
	// ControllerStatusPoweredOff ...
	ControllerStatusPoweredOff ControllerStatus = "PoweredOff"
	// ControllerStatusRecovering ...
	ControllerStatusRecovering ControllerStatus = "Recovering"
	// ControllerStatusWarning ...
	ControllerStatusWarning ControllerStatus = "Warning"
)

// DayOfWeek enumerates the values for day of week.
type DayOfWeek string

const (
	// Friday ...
	Friday DayOfWeek = "Friday"
	// Monday ...
	Monday DayOfWeek = "Monday"
	// Saturday ...
	Saturday DayOfWeek = "Saturday"
	// Sunday ...
	Sunday DayOfWeek = "Sunday"
	// Thursday ...
	Thursday DayOfWeek = "Thursday"
	// Tuesday ...
	Tuesday DayOfWeek = "Tuesday"
	// Wednesday ...
	Wednesday DayOfWeek = "Wednesday"
)

// DeviceConfigurationStatus enumerates the values for device configuration status.
type DeviceConfigurationStatus string

const (
	// Complete ...
	Complete DeviceConfigurationStatus = "Complete"
	// Pending ...
	Pending DeviceConfigurationStatus = "Pending"
)

// DeviceStatus enumerates the values for device status.
type DeviceStatus string

const (
	// Creating ...
	Creating DeviceStatus = "Creating"
	// Deactivated ...
	Deactivated DeviceStatus = "Deactivated"
	// Deactivating ...
	Deactivating DeviceStatus = "Deactivating"
	// Deleted ...
	Deleted DeviceStatus = "Deleted"
	// MaintenanceMode ...
	MaintenanceMode DeviceStatus = "MaintenanceMode"
	// Offline ...
	Offline DeviceStatus = "Offline"
	// Online ...
	Online DeviceStatus = "Online"
	// Provisioning ...
	Provisioning DeviceStatus = "Provisioning"
	// ReadyToSetup ...
	ReadyToSetup DeviceStatus = "ReadyToSetup"
	// RequiresAttention ...
	RequiresAttention DeviceStatus = "RequiresAttention"
	// Unknown ...
	Unknown DeviceStatus = "Unknown"
)

// DeviceType enumerates the values for device type.
type DeviceType string

const (
	// DeviceTypeInvalid ...
	DeviceTypeInvalid DeviceType = "Invalid"
	// DeviceTypeSeries8000PhysicalAppliance ...
	DeviceTypeSeries8000PhysicalAppliance DeviceType = "Series8000PhysicalAppliance"
	// DeviceTypeSeries8000VirtualAppliance ...
	DeviceTypeSeries8000VirtualAppliance DeviceType = "Series8000VirtualAppliance"
)

// EncryptionAlgorithm enumerates the values for encryption algorithm.
type EncryptionAlgorithm string

const (
	// EncryptionAlgorithmAES256 ...
	EncryptionAlgorithmAES256 EncryptionAlgorithm = "AES256"
	// EncryptionAlgorithmNone ...
	EncryptionAlgorithmNone EncryptionAlgorithm = "None"
	// EncryptionAlgorithmRSAESPKCS1V15 ...
	EncryptionAlgorithmRSAESPKCS1V15 EncryptionAlgorithm = "RSAES_PKCS1_v_1_5"
)

// EncryptionStatus enumerates the values for encryption status.
type EncryptionStatus string

const (
	// EncryptionStatusDisabled ...
	EncryptionStatusDisabled EncryptionStatus = "Disabled"
	// EncryptionStatusEnabled ...
	EncryptionStatusEnabled EncryptionStatus = "Enabled"
)

// FeatureSupportStatus enumerates the values for feature support status.
type FeatureSupportStatus string

const (
	// NotAvailable ...
	NotAvailable FeatureSupportStatus = "NotAvailable"
	// Supported ...
	Supported FeatureSupportStatus = "Supported"
	// UnsupportedDeviceVersion ...
	UnsupportedDeviceVersion FeatureSupportStatus = "UnsupportedDeviceVersion"
)

// HardwareComponentStatus enumerates the values for hardware component status.
type HardwareComponentStatus string

const (
	// HardwareComponentStatusFailure ...
	HardwareComponentStatusFailure HardwareComponentStatus = "Failure"
	// HardwareComponentStatusNotPresent ...
	HardwareComponentStatusNotPresent HardwareComponentStatus = "NotPresent"
	// HardwareComponentStatusOk ...
	HardwareComponentStatusOk HardwareComponentStatus = "Ok"
	// HardwareComponentStatusPoweredOff ...
	HardwareComponentStatusPoweredOff HardwareComponentStatus = "PoweredOff"
	// HardwareComponentStatusRecovering ...
	HardwareComponentStatusRecovering HardwareComponentStatus = "Recovering"
	// HardwareComponentStatusUnknown ...
	HardwareComponentStatusUnknown HardwareComponentStatus = "Unknown"
	// HardwareComponentStatusWarning ...
	HardwareComponentStatusWarning HardwareComponentStatus = "Warning"
)

// InEligibilityCategory enumerates the values for in eligibility category.
type InEligibilityCategory string

const (
	// DeviceNotOnline ...
	DeviceNotOnline InEligibilityCategory = "DeviceNotOnline"
	// NotSupportedAppliance ...
	NotSupportedAppliance InEligibilityCategory = "NotSupportedAppliance"
	// RolloverPending ...
	RolloverPending InEligibilityCategory = "RolloverPending"
)

// ISCSIAndCloudStatus enumerates the values for iscsi and cloud status.
type ISCSIAndCloudStatus string

const (
	// ISCSIAndCloudStatusCloudEnabled ...
	ISCSIAndCloudStatusCloudEnabled ISCSIAndCloudStatus = "CloudEnabled"
	// ISCSIAndCloudStatusDisabled ...
	ISCSIAndCloudStatusDisabled ISCSIAndCloudStatus = "Disabled"
	// ISCSIAndCloudStatusIscsiAndCloudEnabled ...
	ISCSIAndCloudStatusIscsiAndCloudEnabled ISCSIAndCloudStatus = "IscsiAndCloudEnabled"
	// ISCSIAndCloudStatusIscsiEnabled ...
	ISCSIAndCloudStatusIscsiEnabled ISCSIAndCloudStatus = "IscsiEnabled"
)

// JobStatus enumerates the values for job status.
type JobStatus string

const (
	// Canceled ...
	Canceled JobStatus = "Canceled"
	// Failed ...
	Failed JobStatus = "Failed"
	// Running ...
	Running JobStatus = "Running"
	// Succeeded ...
	Succeeded JobStatus = "Succeeded"
)

// JobType enumerates the values for job type.
type JobType string

const (
	// CloneVolume ...
	CloneVolume JobType = "CloneVolume"
	// CreateCloudAppliance ...
	CreateCloudAppliance JobType = "CreateCloudAppliance"
	// CreateLocallyPinnedVolume ...
	CreateLocallyPinnedVolume JobType = "CreateLocallyPinnedVolume"
	// FailoverVolumeContainers ...
	FailoverVolumeContainers JobType = "FailoverVolumeContainers"
	// InstallUpdates ...
	InstallUpdates JobType = "InstallUpdates"
	// ManualBackup ...
	ManualBackup JobType = "ManualBackup"
	// ModifyVolume ...
	ModifyVolume JobType = "ModifyVolume"
	// RestoreBackup ...
	RestoreBackup JobType = "RestoreBackup"
	// ScheduledBackup ...
	ScheduledBackup JobType = "ScheduledBackup"
	// SupportPackageLogs ...
	SupportPackageLogs JobType = "SupportPackageLogs"
)

// KeyRolloverStatus enumerates the values for key rollover status.
type KeyRolloverStatus string

const (
	// NotRequired ...
	NotRequired KeyRolloverStatus = "NotRequired"
	// Required ...
	Required KeyRolloverStatus = "Required"
)

// Kind enumerates the values for kind.
type Kind string

const (
	// Series8000 ...
	Series8000 Kind = "Series8000"
)

// ManagerType enumerates the values for manager type.
type ManagerType string

const (
	// GardaV1 ...
	GardaV1 ManagerType = "GardaV1"
	// HelsinkiV1 ...
	HelsinkiV1 ManagerType = "HelsinkiV1"
)

// MetricAggregationType enumerates the values for metric aggregation type.
type MetricAggregationType string

const (
	// MetricAggregationTypeAverage ...
	MetricAggregationTypeAverage MetricAggregationType = "Average"
	// MetricAggregationTypeLast ...
	MetricAggregationTypeLast MetricAggregationType = "Last"
	// MetricAggregationTypeMaximum ...
	MetricAggregationTypeMaximum MetricAggregationType = "Maximum"
	// MetricAggregationTypeMinimum ...
	MetricAggregationTypeMinimum MetricAggregationType = "Minimum"
	// MetricAggregationTypeNone ...
	MetricAggregationTypeNone MetricAggregationType = "None"
	// MetricAggregationTypeTotal ...
	MetricAggregationTypeTotal MetricAggregationType = "Total"
)

// MetricUnit enumerates the values for metric unit.
type MetricUnit string

const (
	// Bytes ...
	Bytes MetricUnit = "Bytes"
	// BytesPerSecond ...
	BytesPerSecond MetricUnit = "BytesPerSecond"
	// Count ...
	Count MetricUnit = "Count"
	// CountPerSecond ...
	CountPerSecond MetricUnit = "CountPerSecond"
	// Percent ...
	Percent MetricUnit = "Percent"
	// Seconds ...
	Seconds MetricUnit = "Seconds"
)

// MonitoringStatus enumerates the values for monitoring status.
type MonitoringStatus string

const (
	// MonitoringStatusDisabled ...
	MonitoringStatusDisabled MonitoringStatus = "Disabled"
	// MonitoringStatusEnabled ...
	MonitoringStatusEnabled MonitoringStatus = "Enabled"
)

// NetInterfaceID enumerates the values for net interface id.
type NetInterfaceID string

const (
	// NetInterfaceIDData0 ...
	NetInterfaceIDData0 NetInterfaceID = "Data0"
	// NetInterfaceIDData1 ...
	NetInterfaceIDData1 NetInterfaceID = "Data1"
	// NetInterfaceIDData2 ...
	NetInterfaceIDData2 NetInterfaceID = "Data2"
	// NetInterfaceIDData3 ...
	NetInterfaceIDData3 NetInterfaceID = "Data3"
	// NetInterfaceIDData4 ...
	NetInterfaceIDData4 NetInterfaceID = "Data4"
	// NetInterfaceIDData5 ...
	NetInterfaceIDData5 NetInterfaceID = "Data5"
	// NetInterfaceIDInvalid ...
	NetInterfaceIDInvalid NetInterfaceID = "Invalid"
)

// NetInterfaceStatus enumerates the values for net interface status.
type NetInterfaceStatus string

const (
	// NetInterfaceStatusDisabled ...
	NetInterfaceStatusDisabled NetInterfaceStatus = "Disabled"
	// NetInterfaceStatusEnabled ...
	NetInterfaceStatusEnabled NetInterfaceStatus = "Enabled"
)

// NetworkMode enumerates the values for network mode.
type NetworkMode string

const (
	// NetworkModeBOTH ...
	NetworkModeBOTH NetworkMode = "BOTH"
	// NetworkModeInvalid ...
	NetworkModeInvalid NetworkMode = "Invalid"
	// NetworkModeIPV4 ...
	NetworkModeIPV4 NetworkMode = "IPV4"
	// NetworkModeIPV6 ...
	NetworkModeIPV6 NetworkMode = "IPV6"
)

// OperationStatus enumerates the values for operation status.
type OperationStatus string

const (
	// OperationStatusDeleting ...
	OperationStatusDeleting OperationStatus = "Deleting"
	// OperationStatusNone ...
	OperationStatusNone OperationStatus = "None"
	// OperationStatusRestoring ...
	OperationStatusRestoring OperationStatus = "Restoring"
	// OperationStatusUpdating ...
	OperationStatusUpdating OperationStatus = "Updating"
)

// OwnerShipStatus enumerates the values for owner ship status.
type OwnerShipStatus string

const (
	// NotOwned ...
	NotOwned OwnerShipStatus = "NotOwned"
	// Owned ...
	Owned OwnerShipStatus = "Owned"
)

// RecurrenceType enumerates the values for recurrence type.
type RecurrenceType string

const (
	// Daily ...
	Daily RecurrenceType = "Daily"
	// Hourly ...
	Hourly RecurrenceType = "Hourly"
	// Minutes ...
	Minutes RecurrenceType = "Minutes"
	// Weekly ...
	Weekly RecurrenceType = "Weekly"
)

// RemoteManagementModeConfiguration enumerates the values for remote management mode configuration.
type RemoteManagementModeConfiguration string

const (
	// RemoteManagementModeConfigurationDisabled ...
	RemoteManagementModeConfigurationDisabled RemoteManagementModeConfiguration = "Disabled"
	// RemoteManagementModeConfigurationHTTPSAndHTTPEnabled ...
	RemoteManagementModeConfigurationHTTPSAndHTTPEnabled RemoteManagementModeConfiguration = "HttpsAndHttpEnabled"
	// RemoteManagementModeConfigurationHTTPSEnabled ...
	RemoteManagementModeConfigurationHTTPSEnabled RemoteManagementModeConfiguration = "HttpsEnabled"
	// RemoteManagementModeConfigurationUnknown ...
	RemoteManagementModeConfigurationUnknown RemoteManagementModeConfiguration = "Unknown"
)

// ScheduledBackupStatus enumerates the values for scheduled backup status.
type ScheduledBackupStatus string

const (
	// ScheduledBackupStatusDisabled ...
	ScheduledBackupStatusDisabled ScheduledBackupStatus = "Disabled"
	// ScheduledBackupStatusEnabled ...
	ScheduledBackupStatusEnabled ScheduledBackupStatus = "Enabled"
)

// ScheduleStatus enumerates the values for schedule status.
type ScheduleStatus string

const (
	// ScheduleStatusDisabled ...
	ScheduleStatusDisabled ScheduleStatus = "Disabled"
	// ScheduleStatusEnabled ...
	ScheduleStatusEnabled ScheduleStatus = "Enabled"
)

// SslStatus enumerates the values for ssl status.
type SslStatus string

const (
	// SslStatusDisabled ...
	SslStatusDisabled SslStatus = "Disabled"
	// SslStatusEnabled ...
	SslStatusEnabled SslStatus = "Enabled"
)

// TargetEligibilityResultCode enumerates the values for target eligibility result code.
type TargetEligibilityResultCode string

const (
	// LocalToTieredVolumesConversionWarning ...
	LocalToTieredVolumesConversionWarning TargetEligibilityResultCode = "LocalToTieredVolumesConversionWarning"
	// TargetAndSourceCannotBeSameError ...
	TargetAndSourceCannotBeSameError TargetEligibilityResultCode = "TargetAndSourceCannotBeSameError"
	// TargetInsufficientCapacityError ...
	TargetInsufficientCapacityError TargetEligibilityResultCode = "TargetInsufficientCapacityError"
	// TargetInsufficientLocalVolumeMemoryError ...
	TargetInsufficientLocalVolumeMemoryError TargetEligibilityResultCode = "TargetInsufficientLocalVolumeMemoryError"
	// TargetInsufficientTieredVolumeMemoryError ...
	TargetInsufficientTieredVolumeMemoryError TargetEligibilityResultCode = "TargetInsufficientTieredVolumeMemoryError"
	// TargetIsNotOnlineError ...
	TargetIsNotOnlineError TargetEligibilityResultCode = "TargetIsNotOnlineError"
	// TargetSourceIncompatibleVersionError ...
	TargetSourceIncompatibleVersionError TargetEligibilityResultCode = "TargetSourceIncompatibleVersionError"
)

// TargetEligibilityStatus enumerates the values for target eligibility status.
type TargetEligibilityStatus string

const (
	// TargetEligibilityStatusEligible ...
	TargetEligibilityStatusEligible TargetEligibilityStatus = "Eligible"
	// TargetEligibilityStatusNotEligible ...
	TargetEligibilityStatusNotEligible TargetEligibilityStatus = "NotEligible"
)

// VirtualMachineAPIType enumerates the values for virtual machine api type.
type VirtualMachineAPIType string

const (
	// Arm ...
	Arm VirtualMachineAPIType = "Arm"
	// Classic ...
	Classic VirtualMachineAPIType = "Classic"
)

// VolumeStatus enumerates the values for volume status.
type VolumeStatus string

const (
	// VolumeStatusOffline ...
	VolumeStatusOffline VolumeStatus = "Offline"
	// VolumeStatusOnline ...
	VolumeStatusOnline VolumeStatus = "Online"
)

// VolumeType enumerates the values for volume type.
type VolumeType string

const (
	// Archival ...
	Archival VolumeType = "Archival"
	// LocallyPinned ...
	LocallyPinned VolumeType = "LocallyPinned"
	// Tiered ...
	Tiered VolumeType = "Tiered"
)

// AccessControlRecord the access control record.
type AccessControlRecord struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// AccessControlRecordProperties - The properties of access control record.
	*AccessControlRecordProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for AccessControlRecord struct.
func (acr *AccessControlRecord) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties AccessControlRecordProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		acr.AccessControlRecordProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		acr.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		acr.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		acr.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		acr.Kind = kind
	}

	return nil
}

// AccessControlRecordList the collection of access control records.
type AccessControlRecordList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]AccessControlRecord `json:"value,omitempty"`
}

// AccessControlRecordProperties the properties of access control record.
type AccessControlRecordProperties struct {
	// InitiatorName - The iSCSI initiator name (IQN).
	InitiatorName *string `json:"initiatorName,omitempty"`
	// VolumeCount - The number of volumes using the access control record.
	VolumeCount *int32 `json:"volumeCount,omitempty"`
}

// AccessControlRecordsCreateOrUpdateFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type AccessControlRecordsCreateOrUpdateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future AccessControlRecordsCreateOrUpdateFuture) Result(client AccessControlRecordsClient) (acr AccessControlRecord, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return acr, autorest.NewError("storsimple.AccessControlRecordsCreateOrUpdateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		acr, err = client.CreateOrUpdateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	acr, err = client.CreateOrUpdateResponder(resp)
	return
}

// AccessControlRecordsDeleteFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type AccessControlRecordsDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future AccessControlRecordsDeleteFuture) Result(client AccessControlRecordsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.AccessControlRecordsDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// AcsConfiguration the ACS configuration.
type AcsConfiguration struct {
	// Namespace - The namespace.
	Namespace *string `json:"namespace,omitempty"`
	// Realm - The realm.
	Realm *string `json:"realm,omitempty"`
	// ServiceURL - The service URL.
	ServiceURL *string `json:"serviceUrl,omitempty"`
}

// Alert the alert.
type Alert struct {
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// AlertProperties - The properties of the alert.
	*AlertProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for Alert struct.
func (a *Alert) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties AlertProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		a.AlertProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		a.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		a.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		a.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		a.Kind = kind
	}

	return nil
}

// AlertErrorDetails the details of the error for which the alert was raised
type AlertErrorDetails struct {
	// ErrorCode - The error code
	ErrorCode *string `json:"errorCode,omitempty"`
	// ErrorMessage - The error message
	ErrorMessage *string `json:"errorMessage,omitempty"`
	// Occurences - The number of occurences
	Occurences *int32 `json:"occurences,omitempty"`
}

// AlertFilter the OData filters to be used for Alert
type AlertFilter struct {
	// Status - Specifies the status of the alerts to be filtered. Only 'Equality' operator is supported for this property. Possible values include: 'Active', 'Cleared'
	Status AlertStatus `json:"status,omitempty"`
	// Severity - Specifies the severity of the alerts to be filtered. Only 'Equality' operator is supported for this property. Possible values include: 'Informational', 'Warning', 'Critical'
	Severity AlertSeverity `json:"severity,omitempty"`
	// SourceType - Specifies the source type of the alerts to be filtered. Only 'Equality' operator is supported for this property. Possible values include: 'AlertSourceTypeResource', 'AlertSourceTypeDevice'
	SourceType AlertSourceType `json:"sourceType,omitempty"`
	// SourceName - Specifies the source name of the alerts to be filtered. Only 'Equality' operator is supported for this property.
	SourceName *string `json:"sourceName,omitempty"`
	// AppearedOnTime - Specifies the appeared time (in UTC) of the alerts to be filtered. Only 'Greater-Than' and 'Lesser-Than' operators are supported for this property.
	AppearedOnTime *date.Time `json:"appearedOnTime,omitempty"`
}

// AlertList the collection of alerts.
type AlertList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]Alert `json:"value,omitempty"`
	// NextLink - The URI of the next page of alerts.
	NextLink *string `json:"nextLink,omitempty"`
}

// AlertListIterator provides access to a complete listing of Alert values.
type AlertListIterator struct {
	i    int
	page AlertListPage
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *AlertListIterator) Next() error {
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err := iter.page.Next()
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter AlertListIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter AlertListIterator) Response() AlertList {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter AlertListIterator) Value() Alert {
	if !iter.page.NotDone() {
		return Alert{}
	}
	return iter.page.Values()[iter.i]
}

// IsEmpty returns true if the ListResult contains no values.
func (al AlertList) IsEmpty() bool {
	return al.Value == nil || len(*al.Value) == 0
}

// alertListPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (al AlertList) alertListPreparer() (*http.Request, error) {
	if al.NextLink == nil || len(to.String(al.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(al.NextLink)))
}

// AlertListPage contains a page of Alert values.
type AlertListPage struct {
	fn func(AlertList) (AlertList, error)
	al AlertList
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *AlertListPage) Next() error {
	next, err := page.fn(page.al)
	if err != nil {
		return err
	}
	page.al = next
	return nil
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page AlertListPage) NotDone() bool {
	return !page.al.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page AlertListPage) Response() AlertList {
	return page.al
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page AlertListPage) Values() []Alert {
	if page.al.IsEmpty() {
		return nil
	}
	return *page.al.Value
}

// AlertNotificationProperties the properties of the alert notification settings.
type AlertNotificationProperties struct {
	// EmailNotification - Indicates whether email notification enabled or not. Possible values include: 'Enabled', 'Disabled'
	EmailNotification AlertEmailNotificationStatus `json:"emailNotification,omitempty"`
	// AlertNotificationCulture - The alert notification culture.
	AlertNotificationCulture *string `json:"alertNotificationCulture,omitempty"`
	// NotificationToServiceOwners - The value indicating whether alert notification enabled for admin or not. Possible values include: 'Enabled', 'Disabled'
	NotificationToServiceOwners AlertEmailNotificationStatus `json:"notificationToServiceOwners,omitempty"`
	// AdditionalRecipientEmailList - The alert notification email list.
	AdditionalRecipientEmailList *[]string `json:"additionalRecipientEmailList,omitempty"`
}

// AlertProperties the properties of alert
type AlertProperties struct {
	// Title - The title of the alert
	Title *string `json:"title,omitempty"`
	// Scope - The scope of the alert. Possible values include: 'AlertScopeResource', 'AlertScopeDevice'
	Scope AlertScope `json:"scope,omitempty"`
	// AlertType - The type of the alert
	AlertType *string `json:"alertType,omitempty"`
	// AppearedAtTime - The UTC time at which the alert was raised
	AppearedAtTime *date.Time `json:"appearedAtTime,omitempty"`
	// AppearedAtSourceTime - The source time at which the alert was raised
	AppearedAtSourceTime *date.Time `json:"appearedAtSourceTime,omitempty"`
	// ClearedAtTime - The UTC time at which the alert was cleared
	ClearedAtTime *date.Time `json:"clearedAtTime,omitempty"`
	// ClearedAtSourceTime - The source time at which the alert was cleared
	ClearedAtSourceTime *date.Time `json:"clearedAtSourceTime,omitempty"`
	// Source - The source at which the alert was raised
	Source *AlertSource `json:"source,omitempty"`
	// Recommendation - The recommended action for the issue raised in the alert
	Recommendation *string `json:"recommendation,omitempty"`
	// ResolutionReason - The reason for resolving the alert
	ResolutionReason *string `json:"resolutionReason,omitempty"`
	// Severity - The severity of the alert. Possible values include: 'Informational', 'Warning', 'Critical'
	Severity AlertSeverity `json:"severity,omitempty"`
	// Status - The current status of the alert. Possible values include: 'Active', 'Cleared'
	Status AlertStatus `json:"status,omitempty"`
	// ErrorDetails - The details of the error for which the alert was raised
	ErrorDetails *AlertErrorDetails `json:"errorDetails,omitempty"`
	// DetailedInformation - More details about the alert
	DetailedInformation *map[string]*string `json:"detailedInformation,omitempty"`
}

// AlertSettings the alert settings.
type AlertSettings struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// AlertNotificationProperties - The properties of the alert notification settings.
	*AlertNotificationProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for AlertSettings struct.
func (as *AlertSettings) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties AlertNotificationProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		as.AlertNotificationProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		as.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		as.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		as.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		as.Kind = kind
	}

	return nil
}

// AlertSource the source details at which the alert was raised
type AlertSource struct {
	// Name - The name of the source
	Name *string `json:"name,omitempty"`
	// TimeZone - The time zone of the source
	TimeZone *string `json:"timeZone,omitempty"`
	// AlertSourceType - The source type of the alert. Possible values include: 'AlertSourceTypeResource', 'AlertSourceTypeDevice'
	AlertSourceType AlertSourceType `json:"alertSourceType,omitempty"`
}

// AsymmetricEncryptedSecret represent the secrets intended for encryption with asymmetric key pair.
type AsymmetricEncryptedSecret struct {
	// Value - The value of the secret.
	Value *string `json:"value,omitempty"`
	// EncryptionCertThumbprint - Thumbprint certificate that was used to encrypt "Value". If the value in unencrypted, it will be null.
	EncryptionCertThumbprint *string `json:"encryptionCertThumbprint,omitempty"`
	// EncryptionAlgorithm - The algorithm used to encrypt "Value". Possible values include: 'EncryptionAlgorithmNone', 'EncryptionAlgorithmAES256', 'EncryptionAlgorithmRSAESPKCS1V15'
	EncryptionAlgorithm EncryptionAlgorithm `json:"encryptionAlgorithm,omitempty"`
}

// AvailableProviderOperation represents available provider operation.
type AvailableProviderOperation struct {
	// Name - The name of the operation being performed on a particular object. Name format: "{resourceProviderNamespace}/{resourceType}/{read|write|delete|action}". Eg. Microsoft.StorSimple/managers/devices/volumeContainers/read, Microsoft.StorSimple/managers/devices/alerts/clearAlerts/action
	Name *string `json:"name,omitempty"`
	// Display - Contains the localized display information for this particular operation/action.
	Display *AvailableProviderOperationDisplay `json:"display,omitempty"`
	// Origin - The intended executor of the operation; governs the display of the operation in the RBAC UX and the audit logs UX. Default value is "user,system"
	Origin *string `json:"origin,omitempty"`
	// Properties - Reserved for future use.
	Properties *map[string]interface{} `json:"properties,omitempty"`
}

// AvailableProviderOperationDisplay contains the localized display information for this particular operation/action.
// These value will be used by several clients for (a) custom role definitions for RBAC, (b) complex query filters for
// the event service and (c) audit history/records for management operations.
type AvailableProviderOperationDisplay struct {
	// Provider - The localized friendly form of the resource provider name - it is expected to also include the publisher/company responsible. It should use Title Casing and begin with 'Microsoft' for 1st party services.
	Provider *string `json:"provider,omitempty"`
	// Resource - The localized friendly form of the resource type related to this action/operation - it should match the public documentation for the resource provider. It should use Title Casing - for examples, please refer to the 'name' section.
	Resource *string `json:"resource,omitempty"`
	// Operation - The localized friendly name for the operation, as it should be shown to the user. It should be concise (to fit in drop downs) but clear (i.e. self-documenting). It should use Title Casing and include the entity/resource to which it applies.
	Operation *string `json:"operation,omitempty"`
	// Description - The localized friendly description for the operation, as it should be shown to the user. It should be thorough, yet concise - it will be used in tool tips and detailed views.
	Description *string `json:"description,omitempty"`
}

// AvailableProviderOperationList list of available provider operations.
type AvailableProviderOperationList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]AvailableProviderOperation `json:"value,omitempty"`
	// NextLink - The NextLink.
	NextLink *string `json:"nextLink,omitempty"`
}

// AvailableProviderOperationListIterator provides access to a complete listing of AvailableProviderOperation values.
type AvailableProviderOperationListIterator struct {
	i    int
	page AvailableProviderOperationListPage
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *AvailableProviderOperationListIterator) Next() error {
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err := iter.page.Next()
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter AvailableProviderOperationListIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter AvailableProviderOperationListIterator) Response() AvailableProviderOperationList {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter AvailableProviderOperationListIterator) Value() AvailableProviderOperation {
	if !iter.page.NotDone() {
		return AvailableProviderOperation{}
	}
	return iter.page.Values()[iter.i]
}

// IsEmpty returns true if the ListResult contains no values.
func (apol AvailableProviderOperationList) IsEmpty() bool {
	return apol.Value == nil || len(*apol.Value) == 0
}

// availableProviderOperationListPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (apol AvailableProviderOperationList) availableProviderOperationListPreparer() (*http.Request, error) {
	if apol.NextLink == nil || len(to.String(apol.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(apol.NextLink)))
}

// AvailableProviderOperationListPage contains a page of AvailableProviderOperation values.
type AvailableProviderOperationListPage struct {
	fn   func(AvailableProviderOperationList) (AvailableProviderOperationList, error)
	apol AvailableProviderOperationList
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *AvailableProviderOperationListPage) Next() error {
	next, err := page.fn(page.apol)
	if err != nil {
		return err
	}
	page.apol = next
	return nil
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page AvailableProviderOperationListPage) NotDone() bool {
	return !page.apol.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page AvailableProviderOperationListPage) Response() AvailableProviderOperationList {
	return page.apol
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page AvailableProviderOperationListPage) Values() []AvailableProviderOperation {
	if page.apol.IsEmpty() {
		return nil
	}
	return *page.apol.Value
}

// Backup the backup.
type Backup struct {
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// BackupProperties - The properties of the backup.
	*BackupProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for Backup struct.
func (b *Backup) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties BackupProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		b.BackupProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		b.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		b.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		b.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		b.Kind = kind
	}

	return nil
}

// BackupElement the backup element.
type BackupElement struct {
	// ElementID - The path ID that uniquely identifies the backup element.
	ElementID *string `json:"elementId,omitempty"`
	// ElementName - The name of the backup element.
	ElementName *string `json:"elementName,omitempty"`
	// ElementType - The hierarchical type of the backup element.
	ElementType *string `json:"elementType,omitempty"`
	// SizeInBytes - The size in bytes.
	SizeInBytes *int64 `json:"sizeInBytes,omitempty"`
	// VolumeName - The name of the volume.
	VolumeName *string `json:"volumeName,omitempty"`
	// VolumeContainerID - The path ID of the volume container.
	VolumeContainerID *string `json:"volumeContainerId,omitempty"`
	// VolumeType - The volume type. Possible values include: 'Tiered', 'Archival', 'LocallyPinned'
	VolumeType VolumeType `json:"volumeType,omitempty"`
}

// BackupFilter the OData filters to be used for backups.
type BackupFilter struct {
	// BackupPolicyID - Specifies the backupPolicyId of the backups to be filtered. Only 'Equality' operator is supported for this property.
	BackupPolicyID *string `json:"backupPolicyId,omitempty"`
	// VolumeID - Specifies the volumeId of the backups to be filtered. Only 'Equality' operator is supported for this property.
	VolumeID *string `json:"volumeId,omitempty"`
	// CreatedTime - Specifies the creation time of the backups to be filtered. Only 'Greater Than or Equal To' and 'Lesser Than or Equal To' operators are supported for this property.
	CreatedTime *date.Time `json:"createdTime,omitempty"`
}

// BackupList the collection of backups.
type BackupList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]Backup `json:"value,omitempty"`
	// NextLink - The NextLink.
	NextLink *string `json:"nextLink,omitempty"`
}

// BackupListIterator provides access to a complete listing of Backup values.
type BackupListIterator struct {
	i    int
	page BackupListPage
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *BackupListIterator) Next() error {
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err := iter.page.Next()
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter BackupListIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter BackupListIterator) Response() BackupList {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter BackupListIterator) Value() Backup {
	if !iter.page.NotDone() {
		return Backup{}
	}
	return iter.page.Values()[iter.i]
}

// IsEmpty returns true if the ListResult contains no values.
func (bl BackupList) IsEmpty() bool {
	return bl.Value == nil || len(*bl.Value) == 0
}

// backupListPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (bl BackupList) backupListPreparer() (*http.Request, error) {
	if bl.NextLink == nil || len(to.String(bl.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(bl.NextLink)))
}

// BackupListPage contains a page of Backup values.
type BackupListPage struct {
	fn func(BackupList) (BackupList, error)
	bl BackupList
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *BackupListPage) Next() error {
	next, err := page.fn(page.bl)
	if err != nil {
		return err
	}
	page.bl = next
	return nil
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page BackupListPage) NotDone() bool {
	return !page.bl.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page BackupListPage) Response() BackupList {
	return page.bl
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page BackupListPage) Values() []Backup {
	if page.bl.IsEmpty() {
		return nil
	}
	return *page.bl.Value
}

// BackupPoliciesBackupNowFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type BackupPoliciesBackupNowFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BackupPoliciesBackupNowFuture) Result(client BackupPoliciesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.BackupPoliciesBackupNowFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.BackupNowResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.BackupNowResponder(resp)
	return
}

// BackupPoliciesCreateOrUpdateFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type BackupPoliciesCreateOrUpdateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BackupPoliciesCreateOrUpdateFuture) Result(client BackupPoliciesClient) (bp BackupPolicy, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return bp, autorest.NewError("storsimple.BackupPoliciesCreateOrUpdateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		bp, err = client.CreateOrUpdateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	bp, err = client.CreateOrUpdateResponder(resp)
	return
}

// BackupPoliciesDeleteFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type BackupPoliciesDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BackupPoliciesDeleteFuture) Result(client BackupPoliciesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.BackupPoliciesDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// BackupPolicy the backup policy.
type BackupPolicy struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// BackupPolicyProperties - The properties of the backup policy.
	*BackupPolicyProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for BackupPolicy struct.
func (bp *BackupPolicy) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties BackupPolicyProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		bp.BackupPolicyProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		bp.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		bp.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		bp.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		bp.Kind = kind
	}

	return nil
}

// BackupPolicyList the collection of backup policies.
type BackupPolicyList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]BackupPolicy `json:"value,omitempty"`
}

// BackupPolicyProperties the properties of the backup policy.
type BackupPolicyProperties struct {
	// VolumeIds - The path IDs of the volumes which are part of the backup policy.
	VolumeIds *[]string `json:"volumeIds,omitempty"`
	// NextBackupTime - The time of the next backup for the backup policy.
	NextBackupTime *date.Time `json:"nextBackupTime,omitempty"`
	// LastBackupTime - The time of the last backup for the backup policy.
	LastBackupTime *date.Time `json:"lastBackupTime,omitempty"`
	// SchedulesCount - The count of schedules the backup policy contains.
	SchedulesCount *int64 `json:"schedulesCount,omitempty"`
	// ScheduledBackupStatus - Indicates whether atleast one of the schedules in the backup policy is active or not. Possible values include: 'ScheduledBackupStatusDisabled', 'ScheduledBackupStatusEnabled'
	ScheduledBackupStatus ScheduledBackupStatus `json:"scheduledBackupStatus,omitempty"`
	// BackupPolicyCreationType - The backup policy creation type. Indicates whether this was created through SaaS or through StorSimple Snapshot Manager. Possible values include: 'BackupPolicyCreationTypeBySaaS', 'BackupPolicyCreationTypeBySSM'
	BackupPolicyCreationType BackupPolicyCreationType `json:"backupPolicyCreationType,omitempty"`
	// SsmHostName - If the backup policy was created by StorSimple Snapshot Manager, then this field indicates the hostname of the StorSimple Snapshot Manager.
	SsmHostName *string `json:"ssmHostName,omitempty"`
}

// BackupProperties the properties of the backup.
type BackupProperties struct {
	// CreatedOn - The time when the backup was created.
	CreatedOn *date.Time `json:"createdOn,omitempty"`
	// SizeInBytes - The backup size in bytes.
	SizeInBytes *int64 `json:"sizeInBytes,omitempty"`
	// BackupType - The type of the backup. Possible values include: 'LocalSnapshot', 'CloudSnapshot'
	BackupType BackupType `json:"backupType,omitempty"`
	// BackupJobCreationType - The backup job creation type. Possible values include: 'Adhoc', 'BySchedule', 'BySSM'
	BackupJobCreationType BackupJobCreationType `json:"backupJobCreationType,omitempty"`
	// BackupPolicyID - The path ID of the backup policy.
	BackupPolicyID *string `json:"backupPolicyId,omitempty"`
	// SsmHostName - The StorSimple Snapshot Manager host name.
	SsmHostName *string `json:"ssmHostName,omitempty"`
	// Elements - The backup elements.
	Elements *[]BackupElement `json:"elements,omitempty"`
}

// BackupSchedule the backup schedule.
type BackupSchedule struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// BackupScheduleProperties - The properties of the backup schedule.
	*BackupScheduleProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for BackupSchedule struct.
func (bs *BackupSchedule) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties BackupScheduleProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		bs.BackupScheduleProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		bs.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		bs.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		bs.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		bs.Kind = kind
	}

	return nil
}

// BackupScheduleList the backup schedule list.
type BackupScheduleList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]BackupSchedule `json:"value,omitempty"`
}

// BackupScheduleProperties the properties of the backup schedule.
type BackupScheduleProperties struct {
	// ScheduleRecurrence - The schedule recurrence.
	ScheduleRecurrence *ScheduleRecurrence `json:"scheduleRecurrence,omitempty"`
	// BackupType - The type of backup which needs to be taken. Possible values include: 'LocalSnapshot', 'CloudSnapshot'
	BackupType BackupType `json:"backupType,omitempty"`
	// RetentionCount - The number of backups to be retained.
	RetentionCount *int64 `json:"retentionCount,omitempty"`
	// StartTime - The start time of the schedule.
	StartTime *date.Time `json:"startTime,omitempty"`
	// ScheduleStatus - The schedule status. Possible values include: 'ScheduleStatusEnabled', 'ScheduleStatusDisabled'
	ScheduleStatus ScheduleStatus `json:"scheduleStatus,omitempty"`
	// LastSuccessfulRun - The last successful backup run which was triggered for the schedule.
	LastSuccessfulRun *date.Time `json:"lastSuccessfulRun,omitempty"`
}

// BackupSchedulesCreateOrUpdateFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type BackupSchedulesCreateOrUpdateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BackupSchedulesCreateOrUpdateFuture) Result(client BackupSchedulesClient) (bs BackupSchedule, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return bs, autorest.NewError("storsimple.BackupSchedulesCreateOrUpdateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		bs, err = client.CreateOrUpdateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	bs, err = client.CreateOrUpdateResponder(resp)
	return
}

// BackupSchedulesDeleteFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type BackupSchedulesDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BackupSchedulesDeleteFuture) Result(client BackupSchedulesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.BackupSchedulesDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// BackupsCloneFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type BackupsCloneFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BackupsCloneFuture) Result(client BackupsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.BackupsCloneFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.CloneResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.CloneResponder(resp)
	return
}

// BackupsDeleteFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type BackupsDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BackupsDeleteFuture) Result(client BackupsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.BackupsDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// BackupsRestoreFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type BackupsRestoreFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BackupsRestoreFuture) Result(client BackupsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.BackupsRestoreFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.RestoreResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.RestoreResponder(resp)
	return
}

// BandwidthRateSettingProperties the properties of the bandwidth setting.
type BandwidthRateSettingProperties struct {
	// Schedules - The schedules.
	Schedules *[]BandwidthSchedule `json:"schedules,omitempty"`
	// VolumeCount - The number of volumes that uses the bandwidth setting.
	VolumeCount *int32 `json:"volumeCount,omitempty"`
}

// BandwidthSchedule the schedule for bandwidth setting.
type BandwidthSchedule struct {
	// Start - The start time of the schdule.
	Start *Time `json:"start,omitempty"`
	// Stop - The stop time of the schedule.
	Stop *Time `json:"stop,omitempty"`
	// RateInMbps - The rate in Mbps.
	RateInMbps *int32 `json:"rateInMbps,omitempty"`
	// Days - The days of the week when this schedule is applicable.
	Days *[]DayOfWeek `json:"days,omitempty"`
}

// BandwidthSetting the bandwidth setting.
type BandwidthSetting struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// BandwidthRateSettingProperties - The properties of the bandwidth setting.
	*BandwidthRateSettingProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for BandwidthSetting struct.
func (bs *BandwidthSetting) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties BandwidthRateSettingProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		bs.BandwidthRateSettingProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		bs.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		bs.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		bs.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		bs.Kind = kind
	}

	return nil
}

// BandwidthSettingList the collection of bandwidth setting entities.
type BandwidthSettingList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]BandwidthSetting `json:"value,omitempty"`
}

// BandwidthSettingsCreateOrUpdateFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type BandwidthSettingsCreateOrUpdateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BandwidthSettingsCreateOrUpdateFuture) Result(client BandwidthSettingsClient) (bs BandwidthSetting, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return bs, autorest.NewError("storsimple.BandwidthSettingsCreateOrUpdateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		bs, err = client.CreateOrUpdateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	bs, err = client.CreateOrUpdateResponder(resp)
	return
}

// BandwidthSettingsDeleteFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type BandwidthSettingsDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future BandwidthSettingsDeleteFuture) Result(client BandwidthSettingsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.BandwidthSettingsDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// BaseModel represents the base class for all other ARM object models
type BaseModel struct {
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
}

// ChapSettings the Challenge-Handshake Authentication Protocol (CHAP) settings.
type ChapSettings struct {
	// InitiatorUser - The CHAP initiator user.
	InitiatorUser *string `json:"initiatorUser,omitempty"`
	// InitiatorSecret - The CHAP initiator secret.
	InitiatorSecret *AsymmetricEncryptedSecret `json:"initiatorSecret,omitempty"`
	// TargetUser - The CHAP target user.
	TargetUser *string `json:"targetUser,omitempty"`
	// TargetSecret - The target secret.
	TargetSecret *AsymmetricEncryptedSecret `json:"targetSecret,omitempty"`
}

// ClearAlertRequest the request for clearing the alert
type ClearAlertRequest struct {
	// ResolutionMessage - The resolution message while clearing the alert
	ResolutionMessage *string `json:"resolutionMessage,omitempty"`
	// Alerts - The list of alert IDs to be cleared
	Alerts *[]string `json:"alerts,omitempty"`
}

// CloneRequest the clone job request.
type CloneRequest struct {
	// TargetDeviceID - The path ID of the device which will act as the clone target.
	TargetDeviceID *string `json:"targetDeviceId,omitempty"`
	// TargetVolumeName - The name of the new volume which will be created and the backup will be cloned into.
	TargetVolumeName *string `json:"targetVolumeName,omitempty"`
	// TargetAccessControlRecordIds - The list of path IDs of the access control records to be associated to the new cloned volume.
	TargetAccessControlRecordIds *[]string `json:"targetAccessControlRecordIds,omitempty"`
	// BackupElement - The backup element that is cloned.
	BackupElement *BackupElement `json:"backupElement,omitempty"`
}

// CloudAppliance the cloud appliance.
type CloudAppliance struct {
	// Name - The name.
	Name *string `json:"name,omitempty"`
	// VnetName - The name of the virtual network.
	VnetName *string `json:"vnetName,omitempty"`
	// VnetRegion - The virtual network region.
	VnetRegion *string `json:"vnetRegion,omitempty"`
	// IsVnetDNSConfigured - Indicates whether virtual network used is configured with DNS or not.
	IsVnetDNSConfigured *bool `json:"isVnetDnsConfigured,omitempty"`
	// IsVnetExpressConfigured - Indicates whether virtual network used is configured with express route or not.
	IsVnetExpressConfigured *bool `json:"isVnetExpressConfigured,omitempty"`
	// SubnetName - The name of the subnet.
	SubnetName *string `json:"subnetName,omitempty"`
	// StorageAccountName - The name of the storage account.
	StorageAccountName *string `json:"storageAccountName,omitempty"`
	// StorageAccountType - The type of the storage account.
	StorageAccountType *string `json:"storageAccountType,omitempty"`
	// VMType - The type of the virtual machine.
	VMType *string `json:"vmType,omitempty"`
	// VMImageName - The name of the virtual machine image.
	VMImageName *string `json:"vmImageName,omitempty"`
	// ModelNumber - The model number.
	ModelNumber *string `json:"modelNumber,omitempty"`
}

// CloudApplianceConfiguration the cloud appliance configuration
type CloudApplianceConfiguration struct {
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// CloudApplianceConfigurationProperties - The properties.
	*CloudApplianceConfigurationProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for CloudApplianceConfiguration struct.
func (cac *CloudApplianceConfiguration) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties CloudApplianceConfigurationProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		cac.CloudApplianceConfigurationProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		cac.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		cac.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		cac.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		cac.Kind = kind
	}

	return nil
}

// CloudApplianceConfigurationList the cloud appliance configuration list
type CloudApplianceConfigurationList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]CloudApplianceConfiguration `json:"value,omitempty"`
}

// CloudApplianceConfigurationProperties the properties of cloud appliance configuration.
type CloudApplianceConfigurationProperties struct {
	// ModelNumber - The model number.
	ModelNumber *string `json:"modelNumber,omitempty"`
	// CloudPlatform - The cloud platform.
	CloudPlatform *string `json:"cloudPlatform,omitempty"`
	// AcsConfiguration - The ACS configuration.
	AcsConfiguration *AcsConfiguration `json:"acsConfiguration,omitempty"`
	// SupportedStorageAccountTypes - The supported storage account types.
	SupportedStorageAccountTypes *[]string `json:"supportedStorageAccountTypes,omitempty"`
	// SupportedRegions - The supported regions.
	SupportedRegions *[]string `json:"supportedRegions,omitempty"`
	// SupportedVMTypes - The supported virtual machine types.
	SupportedVMTypes *[]string `json:"supportedVmTypes,omitempty"`
	// SupportedVMImages - The supported virtual machine images.
	SupportedVMImages *[]VMImage `json:"supportedVmImages,omitempty"`
}

// CloudApplianceSettings the cloud appliance settings.
type CloudApplianceSettings struct {
	// ServiceDataEncryptionKey - The service data encryption key (encrypted with DAK).
	ServiceDataEncryptionKey *AsymmetricEncryptedSecret `json:"serviceDataEncryptionKey,omitempty"`
	// ChannelIntegrityKey - The channel integrity key (encrypted with DAK).
	ChannelIntegrityKey *AsymmetricEncryptedSecret `json:"channelIntegrityKey,omitempty"`
}

// CloudAppliancesProvisionFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type CloudAppliancesProvisionFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future CloudAppliancesProvisionFuture) Result(client CloudAppliancesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.CloudAppliancesProvisionFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.ProvisionResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.ProvisionResponder(resp)
	return
}

// ConfigureDeviceRequest the mandatory device configuration request.
type ConfigureDeviceRequest struct {
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// ConfigureDeviceRequestProperties - The properties of the configure device request.
	*ConfigureDeviceRequestProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for ConfigureDeviceRequest struct.
func (cdr *ConfigureDeviceRequest) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties ConfigureDeviceRequestProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		cdr.ConfigureDeviceRequestProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		cdr.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		cdr.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		cdr.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		cdr.Kind = kind
	}

	return nil
}

// ConfigureDeviceRequestProperties the properties of the configure device request.
type ConfigureDeviceRequestProperties struct {
	// FriendlyName - The friendly name for the device.
	FriendlyName *string `json:"friendlyName,omitempty"`
	// CurrentDeviceName - The current name of the device.
	CurrentDeviceName *string `json:"currentDeviceName,omitempty"`
	// TimeZone - The device time zone. For eg: "Pacific Standard Time"
	TimeZone *string `json:"timeZone,omitempty"`
	// DNSSettings - The secondary DNS Settings of the device.
	DNSSettings *SecondaryDNSSettings `json:"dnsSettings,omitempty"`
	// NetworkInterfaceData0Settings - The 'Data 0' network interface card settings.
	NetworkInterfaceData0Settings *NetworkInterfaceData0Settings `json:"networkInterfaceData0Settings,omitempty"`
}

// ControllerPowerStateChangeRequest the controller power state change request.
type ControllerPowerStateChangeRequest struct {
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// ControllerPowerStateChangeRequestProperties - The properties of the controller power state change request.
	*ControllerPowerStateChangeRequestProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for ControllerPowerStateChangeRequest struct.
func (cpscr *ControllerPowerStateChangeRequest) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties ControllerPowerStateChangeRequestProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		cpscr.ControllerPowerStateChangeRequestProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		cpscr.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		cpscr.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		cpscr.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		cpscr.Kind = kind
	}

	return nil
}

// ControllerPowerStateChangeRequestProperties the properties of the controller power state change request.
type ControllerPowerStateChangeRequestProperties struct {
	// Action - The power state that the request is expecting for the controller of the device. Possible values include: 'Start', 'Restart', 'Shutdown'
	Action ControllerPowerStateAction `json:"action,omitempty"`
	// ActiveController - The active controller that the request is expecting on the device. Possible values include: 'ControllerIDUnknown', 'ControllerIDNone', 'ControllerIDController0', 'ControllerIDController1'
	ActiveController ControllerID `json:"activeController,omitempty"`
	// Controller0State - The controller 0's status that the request is expecting on the device. Possible values include: 'ControllerStatusNotPresent', 'ControllerStatusPoweredOff', 'ControllerStatusOk', 'ControllerStatusRecovering', 'ControllerStatusWarning', 'ControllerStatusFailure'
	Controller0State ControllerStatus `json:"controller0State,omitempty"`
	// Controller1State - The controller 1's status that the request is expecting on the device. Possible values include: 'ControllerStatusNotPresent', 'ControllerStatusPoweredOff', 'ControllerStatusOk', 'ControllerStatusRecovering', 'ControllerStatusWarning', 'ControllerStatusFailure'
	Controller1State ControllerStatus `json:"controller1State,omitempty"`
}

// DataStatistics the additional details related to the data related statistics of a job. Currently applicable only for
// Backup, Clone and Restore jobs.
type DataStatistics struct {
	// TotalData - The total bytes of data to be processed, as part of the job.
	TotalData *int64 `json:"totalData,omitempty"`
	// ProcessedData - The number of bytes of data processed till now, as part of the job.
	ProcessedData *int64 `json:"processedData,omitempty"`
	// CloudData - The number of bytes of data written to cloud, as part of the job.
	CloudData *int64 `json:"cloudData,omitempty"`
	// Throughput - The average throughput of data processed(bytes/sec), as part of the job.
	Throughput *int64 `json:"throughput,omitempty"`
}

// Device the StorSimple device.
type Device struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// DeviceProperties - The properties of the StorSimple device.
	*DeviceProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for Device struct.
func (d *Device) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties DeviceProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		d.DeviceProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		d.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		d.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		d.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		d.Kind = kind
	}

	return nil
}

// DeviceDetails the additional device details regarding the end point count and volume container count.
type DeviceDetails struct {
	// EndpointCount - The total number of endpoints that are currently on the device ( i.e. number of volumes).
	EndpointCount *int32 `json:"endpointCount,omitempty"`
	// VolumeContainerCount - The total number of volume containers on the device.
	VolumeContainerCount *int32 `json:"volumeContainerCount,omitempty"`
}

// DeviceList the collection of devices.
type DeviceList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]Device `json:"value,omitempty"`
}

// DevicePatch the device patch.
type DevicePatch struct {
	// DevicePatchProperties - The properties of the device patch.
	*DevicePatchProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for DevicePatch struct.
func (dp *DevicePatch) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties DevicePatchProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		dp.DevicePatchProperties = &properties
	}

	return nil
}

// DevicePatchProperties the properties of the device patch.
type DevicePatchProperties struct {
	// DeviceDescription - Short description given for the device
	DeviceDescription *string `json:"deviceDescription,omitempty"`
}

// DeviceProperties the properties of the StorSimple device.
type DeviceProperties struct {
	// FriendlyName - The friendly name of the device.
	FriendlyName *string `json:"friendlyName,omitempty"`
	// ActivationTime - The UTC time at which the device was activated
	ActivationTime *date.Time `json:"activationTime,omitempty"`
	// Culture - The language culture setting on the device. For eg: "en-US"
	Culture *string `json:"culture,omitempty"`
	// DeviceDescription - The device description.
	DeviceDescription *string `json:"deviceDescription,omitempty"`
	// DeviceSoftwareVersion - The version number of the software running on the device.
	DeviceSoftwareVersion *string `json:"deviceSoftwareVersion,omitempty"`
	// FriendlySoftwareName - The friendly name of the software running on the device.
	FriendlySoftwareName *string `json:"friendlySoftwareName,omitempty"`
	// DeviceConfigurationStatus - The current configuration status of the device. Possible values include: 'Complete', 'Pending'
	DeviceConfigurationStatus DeviceConfigurationStatus `json:"deviceConfigurationStatus,omitempty"`
	// TargetIqn - The target IQN.
	TargetIqn *string `json:"targetIqn,omitempty"`
	// ModelDescription - The device model.
	ModelDescription *string `json:"modelDescription,omitempty"`
	// Status - The current status of the device. Possible values include: 'Unknown', 'Online', 'Offline', 'Deactivated', 'RequiresAttention', 'MaintenanceMode', 'Creating', 'Provisioning', 'Deactivating', 'Deleted', 'ReadyToSetup'
	Status DeviceStatus `json:"status,omitempty"`
	// SerialNumber - The serial number.
	SerialNumber *string `json:"serialNumber,omitempty"`
	// DeviceType - The type of the device. Possible values include: 'DeviceTypeInvalid', 'DeviceTypeSeries8000VirtualAppliance', 'DeviceTypeSeries8000PhysicalAppliance'
	DeviceType DeviceType `json:"deviceType,omitempty"`
	// ActiveController - The identifier of the active controller of the device. Possible values include: 'ControllerIDUnknown', 'ControllerIDNone', 'ControllerIDController0', 'ControllerIDController1'
	ActiveController ControllerID `json:"activeController,omitempty"`
	// FriendlySoftwareVersion - The device friendly software version.
	FriendlySoftwareVersion *string `json:"friendlySoftwareVersion,omitempty"`
	// AvailableLocalStorageInBytes - The storage in bytes that is available locally on the device.
	AvailableLocalStorageInBytes *int64 `json:"availableLocalStorageInBytes,omitempty"`
	// AvailableTieredStorageInBytes - The storage in bytes that is available on the device for tiered volumes.
	AvailableTieredStorageInBytes *int64 `json:"availableTieredStorageInBytes,omitempty"`
	// ProvisionedTieredStorageInBytes - The storage in bytes that has been provisioned on the device for tiered volumes.
	ProvisionedTieredStorageInBytes *int64 `json:"provisionedTieredStorageInBytes,omitempty"`
	// ProvisionedLocalStorageInBytes - The storage in bytes used for locally pinned volumes on the device (including additional local reservation).
	ProvisionedLocalStorageInBytes *int64 `json:"provisionedLocalStorageInBytes,omitempty"`
	// ProvisionedVolumeSizeInBytes - Total capacity in bytes of tiered and locally pinned volumes on the device
	ProvisionedVolumeSizeInBytes *int64 `json:"provisionedVolumeSizeInBytes,omitempty"`
	// UsingStorageInBytes - The storage in bytes that is currently being used on the device, including both local and cloud.
	UsingStorageInBytes *int64 `json:"usingStorageInBytes,omitempty"`
	// TotalTieredStorageInBytes - The total tiered storage available on the device in bytes.
	TotalTieredStorageInBytes *int64 `json:"totalTieredStorageInBytes,omitempty"`
	// AgentGroupVersion - The device agent group version.
	AgentGroupVersion *int32 `json:"agentGroupVersion,omitempty"`
	// NetworkInterfaceCardCount - The number of network interface cards
	NetworkInterfaceCardCount *int32 `json:"networkInterfaceCardCount,omitempty"`
	// DeviceLocation - The location of the virtual appliance.
	DeviceLocation *string `json:"deviceLocation,omitempty"`
	// VirtualMachineAPIType - The virtual machine API type. Possible values include: 'Classic', 'Arm'
	VirtualMachineAPIType VirtualMachineAPIType `json:"virtualMachineApiType,omitempty"`
	// Details - The additional device details regarding the end point count and volume container count.
	Details *DeviceDetails `json:"details,omitempty"`
	// RolloverDetails - The additional device details for the service data encryption key rollover.
	RolloverDetails *DeviceRolloverDetails `json:"rolloverDetails,omitempty"`
}

// DeviceRolloverDetails the additional device details for the service data encryption key rollover.
type DeviceRolloverDetails struct {
	// AuthorizationEligibility - The eligibility status of device for service data encryption key rollover. Possible values include: 'InEligible', 'Eligible'
	AuthorizationEligibility AuthorizationEligibility `json:"authorizationEligibility,omitempty"`
	// AuthorizationStatus - The authorization status of the device for service data encryption key rollover. Possible values include: 'AuthorizationStatusDisabled', 'AuthorizationStatusEnabled'
	AuthorizationStatus AuthorizationStatus `json:"authorizationStatus,omitempty"`
	// InEligibilityReason - The reason for inEligibility of device, in case it's not eligible for service data encryption key rollover. Possible values include: 'DeviceNotOnline', 'NotSupportedAppliance', 'RolloverPending'
	InEligibilityReason InEligibilityCategory `json:"inEligibilityReason,omitempty"`
}

// DevicesConfigureFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type DevicesConfigureFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DevicesConfigureFuture) Result(client DevicesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.DevicesConfigureFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.ConfigureResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.ConfigureResponder(resp)
	return
}

// DevicesDeactivateFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type DevicesDeactivateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DevicesDeactivateFuture) Result(client DevicesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.DevicesDeactivateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeactivateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeactivateResponder(resp)
	return
}

// DevicesDeleteFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type DevicesDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DevicesDeleteFuture) Result(client DevicesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.DevicesDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// DeviceSettingsCreateOrUpdateAlertSettingsFuture an abstraction for monitoring and retrieving the results of a
// long-running operation.
type DeviceSettingsCreateOrUpdateAlertSettingsFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DeviceSettingsCreateOrUpdateAlertSettingsFuture) Result(client DeviceSettingsClient) (as AlertSettings, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return as, autorest.NewError("storsimple.DeviceSettingsCreateOrUpdateAlertSettingsFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		as, err = client.CreateOrUpdateAlertSettingsResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	as, err = client.CreateOrUpdateAlertSettingsResponder(resp)
	return
}

// DeviceSettingsCreateOrUpdateTimeSettingsFuture an abstraction for monitoring and retrieving the results of a
// long-running operation.
type DeviceSettingsCreateOrUpdateTimeSettingsFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DeviceSettingsCreateOrUpdateTimeSettingsFuture) Result(client DeviceSettingsClient) (ts TimeSettings, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ts, autorest.NewError("storsimple.DeviceSettingsCreateOrUpdateTimeSettingsFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ts, err = client.CreateOrUpdateTimeSettingsResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ts, err = client.CreateOrUpdateTimeSettingsResponder(resp)
	return
}

// DeviceSettingsSyncRemotemanagementCertificateFuture an abstraction for monitoring and retrieving the results of a
// long-running operation.
type DeviceSettingsSyncRemotemanagementCertificateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DeviceSettingsSyncRemotemanagementCertificateFuture) Result(client DeviceSettingsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.DeviceSettingsSyncRemotemanagementCertificateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.SyncRemotemanagementCertificateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.SyncRemotemanagementCertificateResponder(resp)
	return
}

// DeviceSettingsUpdateNetworkSettingsFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type DeviceSettingsUpdateNetworkSettingsFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DeviceSettingsUpdateNetworkSettingsFuture) Result(client DeviceSettingsClient) (ns NetworkSettings, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ns, autorest.NewError("storsimple.DeviceSettingsUpdateNetworkSettingsFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ns, err = client.UpdateNetworkSettingsResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ns, err = client.UpdateNetworkSettingsResponder(resp)
	return
}

// DeviceSettingsUpdateSecuritySettingsFuture an abstraction for monitoring and retrieving the results of a
// long-running operation.
type DeviceSettingsUpdateSecuritySettingsFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DeviceSettingsUpdateSecuritySettingsFuture) Result(client DeviceSettingsClient) (ss SecuritySettings, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ss, autorest.NewError("storsimple.DeviceSettingsUpdateSecuritySettingsFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ss, err = client.UpdateSecuritySettingsResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ss, err = client.UpdateSecuritySettingsResponder(resp)
	return
}

// DevicesFailoverFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type DevicesFailoverFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DevicesFailoverFuture) Result(client DevicesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.DevicesFailoverFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.FailoverResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.FailoverResponder(resp)
	return
}

// DevicesInstallUpdatesFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type DevicesInstallUpdatesFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DevicesInstallUpdatesFuture) Result(client DevicesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.DevicesInstallUpdatesFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.InstallUpdatesResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.InstallUpdatesResponder(resp)
	return
}

// DevicesScanForUpdatesFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type DevicesScanForUpdatesFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future DevicesScanForUpdatesFuture) Result(client DevicesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.DevicesScanForUpdatesFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.ScanForUpdatesResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.ScanForUpdatesResponder(resp)
	return
}

// DimensionFilter the dimension filter.
type DimensionFilter struct {
	// Name - Specifies the dimension name. E.g., NetworkInterface. Valid values are the ones specified in the field "dimensions" in the ListMetricDefinitions call. Only 'Equality' operator is supported for this property.
	Name *string `json:"name,omitempty"`
	// Values - Specifies the dimension value. E.g., Data0. Valid values are the ones returned in the field "dimensions" in the ListMetricDefinitions call. Only 'Equality' operator is supported for this property.
	Values *string `json:"values,omitempty"`
}

// DNSSettings the DNS(Domain Name Server) settings of a device.
type DNSSettings struct {
	// PrimaryDNSServer - The primary IPv4 DNS server for the device
	PrimaryDNSServer *string `json:"primaryDnsServer,omitempty"`
	// PrimaryIpv6DNSServer - The primary IPv6 DNS server for the device
	PrimaryIpv6DNSServer *string `json:"primaryIpv6DnsServer,omitempty"`
	// SecondaryDNSServers - The secondary IPv4 DNS server for the device
	SecondaryDNSServers *[]string `json:"secondaryDnsServers,omitempty"`
	// SecondaryIpv6DNSServers - The secondary IPv6 DNS server for the device
	SecondaryIpv6DNSServers *[]string `json:"secondaryIpv6DnsServers,omitempty"`
}

// EncryptionSettings the encryption settings.
type EncryptionSettings struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// EncryptionSettingsProperties - The properties of the encryption settings.
	*EncryptionSettingsProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for EncryptionSettings struct.
func (es *EncryptionSettings) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties EncryptionSettingsProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		es.EncryptionSettingsProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		es.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		es.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		es.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		es.Kind = kind
	}

	return nil
}

// EncryptionSettingsProperties the properties of encryption settings.
type EncryptionSettingsProperties struct {
	// EncryptionStatus - The encryption status to indicates if encryption is enabled or not. Possible values include: 'EncryptionStatusEnabled', 'EncryptionStatusDisabled'
	EncryptionStatus EncryptionStatus `json:"encryptionStatus,omitempty"`
	// KeyRolloverStatus - The key rollover status to indicates if key rollover is required or not. If secret's encryption has been upgraded, then it requires key rollover. Possible values include: 'Required', 'NotRequired'
	KeyRolloverStatus KeyRolloverStatus `json:"keyRolloverStatus,omitempty"`
}

// FailoverRequest the request object for triggering a failover of volume containers, from a source device to a target
// device.
type FailoverRequest struct {
	// TargetDeviceID - The ARM path ID of the device which will act as the failover target.
	TargetDeviceID *string `json:"targetDeviceId,omitempty"`
	// VolumeContainers - The list of path IDs of the volume containers which needs to be failed-over to the target device.
	VolumeContainers *[]string `json:"volumeContainers,omitempty"`
}

// FailoverSet the failover set on a device.
type FailoverSet struct {
	// VolumeContainers - The list of meta data of volume containers, which are part of the failover set.
	VolumeContainers *[]VolumeContainerFailoverMetadata `json:"volumeContainers,omitempty"`
	// EligibilityResult - The eligibility result of the failover set, for failover.
	EligibilityResult *FailoverSetEligibilityResult `json:"eligibilityResult,omitempty"`
}

// FailoverSetEligibilityResult the eligibility result of failover set, for failover.
type FailoverSetEligibilityResult struct {
	// IsEligibleForFailover - Represents if this failover set is eligible for failover or not.
	IsEligibleForFailover *bool `json:"isEligibleForFailover,omitempty"`
	// ErrorMessage - The error message, if the failover set is not eligible for failover.
	ErrorMessage *string `json:"errorMessage,omitempty"`
}

// FailoverSetsList the list of failover sets.
type FailoverSetsList struct {
	autorest.Response `json:"-"`
	// Value - The list of failover sets.
	Value *[]FailoverSet `json:"value,omitempty"`
}

// FailoverTarget represents the eligibility of a device as a failover target device.
type FailoverTarget struct {
	// DeviceID - The path ID of the device.
	DeviceID *string `json:"deviceId,omitempty"`
	// DeviceStatus - The status of the device. Possible values include: 'Unknown', 'Online', 'Offline', 'Deactivated', 'RequiresAttention', 'MaintenanceMode', 'Creating', 'Provisioning', 'Deactivating', 'Deleted', 'ReadyToSetup'
	DeviceStatus DeviceStatus `json:"deviceStatus,omitempty"`
	// ModelDescription - The model number of the device.
	ModelDescription *string `json:"modelDescription,omitempty"`
	// DeviceSoftwareVersion - The software version of the device.
	DeviceSoftwareVersion *string `json:"deviceSoftwareVersion,omitempty"`
	// DataContainersCount - The count of datacontainers on the device.
	DataContainersCount *int32 `json:"dataContainersCount,omitempty"`
	// VolumesCount - The count of volumes on the device.
	VolumesCount *int32 `json:"volumesCount,omitempty"`
	// AvailableLocalStorageInBytes - The amount of free local storage available on the device in bytes.
	AvailableLocalStorageInBytes *int64 `json:"availableLocalStorageInBytes,omitempty"`
	// AvailableTieredStorageInBytes - The amount of free tiered storage available for the device in bytes.
	AvailableTieredStorageInBytes *int64 `json:"availableTieredStorageInBytes,omitempty"`
	// DeviceLocation - The geo location (applicable only for cloud appliances) of the device.
	DeviceLocation *string `json:"deviceLocation,omitempty"`
	// FriendlyDeviceSoftwareVersion - The friendly name for the current version of software on the device.
	FriendlyDeviceSoftwareVersion *string `json:"friendlyDeviceSoftwareVersion,omitempty"`
	// EligibilityResult - The eligibility result of the device, as a failover target device.
	EligibilityResult *TargetEligibilityResult `json:"eligibilityResult,omitempty"`
}

// FailoverTargetsList the list of all devices in a resource and their eligibility status as a failover target device.
type FailoverTargetsList struct {
	autorest.Response `json:"-"`
	// Value - The list of all the failover targets.
	Value *[]FailoverTarget `json:"value,omitempty"`
}

// Feature the feature.
type Feature struct {
	// Name - The name of the feature.
	Name *string `json:"name,omitempty"`
	// Status - The feature support status. Possible values include: 'NotAvailable', 'UnsupportedDeviceVersion', 'Supported'
	Status FeatureSupportStatus `json:"status,omitempty"`
}

// FeatureFilter the OData filter to be used for features.
type FeatureFilter struct {
	// DeviceID - Specifies the device ID for which the features are required. Only 'Equality' operator is supported for this property.
	DeviceID *string `json:"deviceId,omitempty"`
}

// FeatureList the collections of features.
type FeatureList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]Feature `json:"value,omitempty"`
}

// HardwareComponent the hardware component.
type HardwareComponent struct {
	// ComponentID - The component ID.
	ComponentID *string `json:"componentId,omitempty"`
	// DisplayName - The display name of the hardware component.
	DisplayName *string `json:"displayName,omitempty"`
	// Status - The status of the hardware component. Possible values include: 'HardwareComponentStatusUnknown', 'HardwareComponentStatusNotPresent', 'HardwareComponentStatusPoweredOff', 'HardwareComponentStatusOk', 'HardwareComponentStatusRecovering', 'HardwareComponentStatusWarning', 'HardwareComponentStatusFailure'
	Status HardwareComponentStatus `json:"status,omitempty"`
	// StatusDisplayName - The display name of the status of hardware component.
	StatusDisplayName *string `json:"statusDisplayName,omitempty"`
}

// HardwareComponentGroup the hardware component group.
type HardwareComponentGroup struct {
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// HardwareComponentGroupProperties - The properties of the hardware component group.
	*HardwareComponentGroupProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for HardwareComponentGroup struct.
func (hcg *HardwareComponentGroup) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties HardwareComponentGroupProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		hcg.HardwareComponentGroupProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		hcg.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		hcg.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		hcg.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		hcg.Kind = kind
	}

	return nil
}

// HardwareComponentGroupList the collection of hardware component groups.
type HardwareComponentGroupList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]HardwareComponentGroup `json:"value,omitempty"`
}

// HardwareComponentGroupProperties the properties of hardware component group.
type HardwareComponentGroupProperties struct {
	// DisplayName - The display name the hardware component group.
	DisplayName *string `json:"displayName,omitempty"`
	// LastUpdatedTime - The last updated time.
	LastUpdatedTime *date.Time `json:"lastUpdatedTime,omitempty"`
	// Components - The list of hardware components.
	Components *[]HardwareComponent `json:"components,omitempty"`
}

// HardwareComponentGroupsChangeControllerPowerStateFuture an abstraction for monitoring and retrieving the results of
// a long-running operation.
type HardwareComponentGroupsChangeControllerPowerStateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future HardwareComponentGroupsChangeControllerPowerStateFuture) Result(client HardwareComponentGroupsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.HardwareComponentGroupsChangeControllerPowerStateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.ChangeControllerPowerStateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.ChangeControllerPowerStateResponder(resp)
	return
}

// Job the job.
type Job struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// Status - The current status of the job. Possible values include: 'Running', 'Succeeded', 'Failed', 'Canceled'
	Status JobStatus `json:"status,omitempty"`
	// StartTime - The UTC time at which the job was started.
	StartTime *date.Time `json:"startTime,omitempty"`
	// EndTime - The UTC time at which the job completed.
	EndTime *date.Time `json:"endTime,omitempty"`
	// PercentComplete - The percentage of the job that is already complete.
	PercentComplete *int32 `json:"percentComplete,omitempty"`
	// Error - The error details, if any, for the job.
	Error *JobErrorDetails `json:"error,omitempty"`
	// JobProperties - The properties of the job.
	*JobProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for Job struct.
func (j *Job) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["status"]
	if v != nil {
		var status JobStatus
		err = json.Unmarshal(*m["status"], &status)
		if err != nil {
			return err
		}
		j.Status = status
	}

	v = m["startTime"]
	if v != nil {
		var startTime date.Time
		err = json.Unmarshal(*m["startTime"], &startTime)
		if err != nil {
			return err
		}
		j.StartTime = &startTime
	}

	v = m["endTime"]
	if v != nil {
		var endTime date.Time
		err = json.Unmarshal(*m["endTime"], &endTime)
		if err != nil {
			return err
		}
		j.EndTime = &endTime
	}

	v = m["percentComplete"]
	if v != nil {
		var percentComplete int32
		err = json.Unmarshal(*m["percentComplete"], &percentComplete)
		if err != nil {
			return err
		}
		j.PercentComplete = &percentComplete
	}

	v = m["error"]
	if v != nil {
		var errorVar JobErrorDetails
		err = json.Unmarshal(*m["error"], &errorVar)
		if err != nil {
			return err
		}
		j.Error = &errorVar
	}

	v = m["properties"]
	if v != nil {
		var properties JobProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		j.JobProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		j.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		j.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		j.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		j.Kind = kind
	}

	return nil
}

// JobErrorDetails the job error details. Contains list of job error items.
type JobErrorDetails struct {
	// ErrorDetails - The error details.
	ErrorDetails *[]JobErrorItem `json:"errorDetails,omitempty"`
	// Code - The error code intended for programmatic access.
	Code *string `json:"code,omitempty"`
	// Message - The error message intended to describe the error in detail.
	Message *string `json:"message,omitempty"`
}

// JobErrorItem the job error items.
type JobErrorItem struct {
	// Recommendations - The recommended actions.
	Recommendations *[]string `json:"recommendations,omitempty"`
	// Code - The error code intended for programmatic access.
	Code *string `json:"code,omitempty"`
	// Message - The error message intended to describe the error in detail.
	Message *string `json:"message,omitempty"`
}

// JobFilter the OData filter to be used for jobs.
type JobFilter struct {
	// Status - Specifies the status of the jobs to be filtered. For e.g., "Running", "Succeeded", "Failed" or "Canceled". Only 'Equality' operator is supported for this property.
	Status *string `json:"status,omitempty"`
	// JobType - Specifies the type of the jobs to be filtered. For e.g., "ScheduledBackup", "ManualBackup", "RestoreBackup", "CloneVolume", "FailoverVolumeContainers", "CreateLocallyPinnedVolume", "ModifyVolume", "InstallUpdates", "SupportPackageLogs", or "CreateCloudAppliance". Only 'Equality' operator can be used for this property.
	JobType *string `json:"jobType,omitempty"`
	// StartTime - Specifies the start time of the jobs to be filtered.  Only 'Greater Than or Equal To' and 'Lesser Than or Equal To' operators are supported for this property.
	StartTime *date.Time `json:"startTime,omitempty"`
}

// JobList the collection of jobs.
type JobList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]Job `json:"value,omitempty"`
	// NextLink - The NextLink.
	NextLink *string `json:"nextLink,omitempty"`
}

// JobListIterator provides access to a complete listing of Job values.
type JobListIterator struct {
	i    int
	page JobListPage
}

// Next advances to the next value.  If there was an error making
// the request the iterator does not advance and the error is returned.
func (iter *JobListIterator) Next() error {
	iter.i++
	if iter.i < len(iter.page.Values()) {
		return nil
	}
	err := iter.page.Next()
	if err != nil {
		iter.i--
		return err
	}
	iter.i = 0
	return nil
}

// NotDone returns true if the enumeration should be started or is not yet complete.
func (iter JobListIterator) NotDone() bool {
	return iter.page.NotDone() && iter.i < len(iter.page.Values())
}

// Response returns the raw server response from the last page request.
func (iter JobListIterator) Response() JobList {
	return iter.page.Response()
}

// Value returns the current value or a zero-initialized value if the
// iterator has advanced beyond the end of the collection.
func (iter JobListIterator) Value() Job {
	if !iter.page.NotDone() {
		return Job{}
	}
	return iter.page.Values()[iter.i]
}

// IsEmpty returns true if the ListResult contains no values.
func (jl JobList) IsEmpty() bool {
	return jl.Value == nil || len(*jl.Value) == 0
}

// jobListPreparer prepares a request to retrieve the next set of results.
// It returns nil if no more results exist.
func (jl JobList) jobListPreparer() (*http.Request, error) {
	if jl.NextLink == nil || len(to.String(jl.NextLink)) < 1 {
		return nil, nil
	}
	return autorest.Prepare(&http.Request{},
		autorest.AsJSON(),
		autorest.AsGet(),
		autorest.WithBaseURL(to.String(jl.NextLink)))
}

// JobListPage contains a page of Job values.
type JobListPage struct {
	fn func(JobList) (JobList, error)
	jl JobList
}

// Next advances to the next page of values.  If there was an error making
// the request the page does not advance and the error is returned.
func (page *JobListPage) Next() error {
	next, err := page.fn(page.jl)
	if err != nil {
		return err
	}
	page.jl = next
	return nil
}

// NotDone returns true if the page enumeration should be started or is not yet complete.
func (page JobListPage) NotDone() bool {
	return !page.jl.IsEmpty()
}

// Response returns the raw server response from the last page request.
func (page JobListPage) Response() JobList {
	return page.jl
}

// Values returns the slice of values for the current page or nil if there are no values.
func (page JobListPage) Values() []Job {
	if page.jl.IsEmpty() {
		return nil
	}
	return *page.jl.Value
}

// JobProperties the properties of the job.
type JobProperties struct {
	// JobType - The type of the job. Possible values include: 'ScheduledBackup', 'ManualBackup', 'RestoreBackup', 'CloneVolume', 'FailoverVolumeContainers', 'CreateLocallyPinnedVolume', 'ModifyVolume', 'InstallUpdates', 'SupportPackageLogs', 'CreateCloudAppliance'
	JobType JobType `json:"jobType,omitempty"`
	// DataStats - The data statistics properties of the job.
	DataStats *DataStatistics `json:"dataStats,omitempty"`
	// EntityLabel - The entity identifier for which the job ran.
	EntityLabel *string `json:"entityLabel,omitempty"`
	// EntityType - The entity type for which the job ran.
	EntityType *string `json:"entityType,omitempty"`
	// JobStages - The job stages.
	JobStages *[]JobStage `json:"jobStages,omitempty"`
	// DeviceID - The device ID in which the job ran.
	DeviceID *string `json:"deviceId,omitempty"`
	// IsCancellable - Represents whether the job is cancellable or not.
	IsCancellable *bool `json:"isCancellable,omitempty"`
	// BackupType - The backup type (CloudSnapshot | LocalSnapshot). Applicable only for backup jobs. Possible values include: 'LocalSnapshot', 'CloudSnapshot'
	BackupType BackupType `json:"backupType,omitempty"`
	// SourceDeviceID - The source device ID of the failover job.
	SourceDeviceID *string `json:"sourceDeviceId,omitempty"`
	// BackupPointInTime - The time of the backup used for the failover.
	BackupPointInTime *date.Time `json:"backupPointInTime,omitempty"`
}

// JobsCancelFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type JobsCancelFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future JobsCancelFuture) Result(client JobsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.JobsCancelFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.CancelResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.CancelResponder(resp)
	return
}

// JobStage the details about the specific stage of a job.
type JobStage struct {
	// Message - The message of the job stage.
	Message *string `json:"message,omitempty"`
	// StageStatus - The stage status. Possible values include: 'Running', 'Succeeded', 'Failed', 'Canceled'
	StageStatus JobStatus `json:"stageStatus,omitempty"`
	// Detail - The details of the stage.
	Detail *string `json:"detail,omitempty"`
	// ErrorCode - The error code of the stage if any.
	ErrorCode *string `json:"errorCode,omitempty"`
}

// Key the key.
type Key struct {
	autorest.Response `json:"-"`
	// ActivationKey - The activation key for the device.
	ActivationKey *string `json:"activationKey,omitempty"`
}

// ListFailoverTargetsRequest the request object for fetching the list of failover targets (eligible devices for
// failover).
type ListFailoverTargetsRequest struct {
	// VolumeContainers - The list of path IDs of the volume containers that needs to be failed-over, for which we want to fetch the eligible targets.
	VolumeContainers *[]string `json:"volumeContainers,omitempty"`
}

// Manager the StorSimple Manager.
type Manager struct {
	autorest.Response `json:"-"`
	// ID - The resource ID.
	ID *string `json:"id,omitempty"`
	// Name - The resource name.
	Name *string `json:"name,omitempty"`
	// Type - The resource type.
	Type *string `json:"type,omitempty"`
	// Location - The geo location of the resource.
	Location *string `json:"location,omitempty"`
	// Tags - The tags attached to the resource.
	Tags *map[string]*string `json:"tags,omitempty"`
	// ManagerProperties - The properties of the StorSimple Manager.
	*ManagerProperties `json:"properties,omitempty"`
	// Etag - The etag of the manager.
	Etag *string `json:"etag,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for Manager struct.
func (mVar *Manager) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties ManagerProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		mVar.ManagerProperties = &properties
	}

	v = m["etag"]
	if v != nil {
		var etag string
		err = json.Unmarshal(*m["etag"], &etag)
		if err != nil {
			return err
		}
		mVar.Etag = &etag
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		mVar.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		mVar.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		mVar.Type = &typeVar
	}

	v = m["location"]
	if v != nil {
		var location string
		err = json.Unmarshal(*m["location"], &location)
		if err != nil {
			return err
		}
		mVar.Location = &location
	}

	v = m["tags"]
	if v != nil {
		var tags map[string]*string
		err = json.Unmarshal(*m["tags"], &tags)
		if err != nil {
			return err
		}
		mVar.Tags = &tags
	}

	return nil
}

// ManagerExtendedInfo the extended info of the manager.
type ManagerExtendedInfo struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// ManagerExtendedInfoProperties - The extended info properties.
	*ManagerExtendedInfoProperties `json:"properties,omitempty"`
	// Etag - The etag of the resource.
	Etag *string `json:"etag,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for ManagerExtendedInfo struct.
func (mei *ManagerExtendedInfo) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties ManagerExtendedInfoProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		mei.ManagerExtendedInfoProperties = &properties
	}

	v = m["etag"]
	if v != nil {
		var etag string
		err = json.Unmarshal(*m["etag"], &etag)
		if err != nil {
			return err
		}
		mei.Etag = &etag
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		mei.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		mei.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		mei.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		mei.Kind = kind
	}

	return nil
}

// ManagerExtendedInfoProperties the properties of the manager extended info.
type ManagerExtendedInfoProperties struct {
	// Version - The version of the extended info being persisted.
	Version *string `json:"version,omitempty"`
	// IntegrityKey - Represents the CIK of the resource.
	IntegrityKey *string `json:"integrityKey,omitempty"`
	// EncryptionKey - Represents the CEK of the resource.
	EncryptionKey *string `json:"encryptionKey,omitempty"`
	// EncryptionKeyThumbprint - Represents the Cert thumbprint that was used to encrypt the CEK.
	EncryptionKeyThumbprint *string `json:"encryptionKeyThumbprint,omitempty"`
	// PortalCertificateThumbprint - Represents the portal thumbprint which can be used optionally to encrypt the entire data before storing it.
	PortalCertificateThumbprint *string `json:"portalCertificateThumbprint,omitempty"`
	// Algorithm - Represents the encryption algorithm used to encrypt the keys. None - if Key is saved in plain text format. Algorithm name - if key is encrypted
	Algorithm *string `json:"algorithm,omitempty"`
}

// ManagerIntrinsicSettings intrinsic settings which refers to the type of the Storsimple Manager.
type ManagerIntrinsicSettings struct {
	// Type - The type of StorSimple Manager. Possible values include: 'GardaV1', 'HelsinkiV1'
	Type ManagerType `json:"type,omitempty"`
}

// ManagerList the list of StorSimple Managers.
type ManagerList struct {
	autorest.Response `json:"-"`
	// Value - The list of storsimple managers.
	Value *[]Manager `json:"value,omitempty"`
}

// ManagerPatch the StorSimple Manager patch.
type ManagerPatch struct {
	// Tags - The tags attached to the Manager.
	Tags *map[string]*string `json:"tags,omitempty"`
}

// ManagerProperties the properties of the StorSimple Manager.
type ManagerProperties struct {
	// CisIntrinsicSettings - Represents the type of StorSimple Manager.
	CisIntrinsicSettings *ManagerIntrinsicSettings `json:"cisIntrinsicSettings,omitempty"`
	// Sku - Specifies the Sku.
	Sku *ManagerSku `json:"sku,omitempty"`
	// ProvisioningState - Specifies the state of the resource as it is getting provisioned. Value of "Succeeded" means the Manager was successfully created.
	ProvisioningState *string `json:"provisioningState,omitempty"`
}

// ManagerSku the Sku.
type ManagerSku struct {
	// Name - Refers to the sku name which should be "Standard"
	Name *string `json:"name,omitempty"`
}

// MetricAvailablity the metric availability.
type MetricAvailablity struct {
	// TimeGrain - The aggregation interval for the metric.
	TimeGrain *string `json:"timeGrain,omitempty"`
	// Retention - The retention period for the metric at the specified timegrain.
	Retention *string `json:"retention,omitempty"`
}

// MetricData the metric data.
type MetricData struct {
	// TimeStamp - The time stamp of the metric data.
	TimeStamp *date.Time `json:"timeStamp,omitempty"`
	// Sum - The sum of all samples at the time stamp.
	Sum *float64 `json:"sum,omitempty"`
	// Count - The count of all samples at the time stamp.
	Count *int32 `json:"count,omitempty"`
	// Average - The average of all samples at the time stamp.
	Average *float64 `json:"average,omitempty"`
	// Minimum - The minimum of all samples at the time stamp.
	Minimum *float64 `json:"minimum,omitempty"`
	// Maximum - The maximum of all samples at the time stamp.
	Maximum *float64 `json:"maximum,omitempty"`
}

// MetricDefinition the monitoring metric definition.
type MetricDefinition struct {
	// Name - The metric name.
	Name *MetricName `json:"name,omitempty"`
	// Unit - The metric unit. Possible values include: 'Bytes', 'BytesPerSecond', 'Count', 'CountPerSecond', 'Percent', 'Seconds'
	Unit MetricUnit `json:"unit,omitempty"`
	// PrimaryAggregationType - The metric aggregation type. Possible values include: 'MetricAggregationTypeAverage', 'MetricAggregationTypeLast', 'MetricAggregationTypeMaximum', 'MetricAggregationTypeMinimum', 'MetricAggregationTypeNone', 'MetricAggregationTypeTotal'
	PrimaryAggregationType MetricAggregationType `json:"primaryAggregationType,omitempty"`
	// ResourceID - The metric source ID.
	ResourceID *string `json:"resourceId,omitempty"`
	// MetricAvailabilities - The available metric granularities.
	MetricAvailabilities *[]MetricAvailablity `json:"metricAvailabilities,omitempty"`
	// Dimensions - The available metric dimensions.
	Dimensions *[]MetricDimension `json:"dimensions,omitempty"`
	// Category - The category of the metric.
	Category *string `json:"category,omitempty"`
	// Type - The metric definition type.
	Type *string `json:"type,omitempty"`
}

// MetricDefinitionList the list of metric definitions.
type MetricDefinitionList struct {
	autorest.Response `json:"-"`
	// Value - The list of metric definitions.
	Value *[]MetricDefinition `json:"value,omitempty"`
}

// MetricDimension the metric dimension. It indicates the source of the metric.
type MetricDimension struct {
	// Name - The metric dimension name.
	Name *string `json:"name,omitempty"`
	// Value - The metric dimension values.
	Value *string `json:"value,omitempty"`
}

// MetricFilter the OData filters to be used for metrics.
type MetricFilter struct {
	// Name - Specifies the metric name filter specifying the name of the metric to be filtered on. Only 'Equality' operator is supported for this property.
	Name *MetricNameFilter `json:"name,omitempty"`
	// StartTime - Specifies the start time of the time range to be queried. Only 'Greater Than Or Equal To' operator is supported for this property.
	StartTime *date.Time `json:"startTime,omitempty"`
	// EndTime - Specifies the end time of the time range to be queried. Only 'Less Than Or Equal To' operator is supported for this property.
	EndTime *date.Time `json:"endTime,omitempty"`
	// TimeGrain - Specifies the time granularity of the metrics to be returned. E.g., "P1D". Valid values are the ones returned as the field "timeGrain" in the ListMetricDefinitions call. Only 'Equality' operator is supported for this property.
	TimeGrain *string `json:"timeGrain,omitempty"`
	// Category - Specifies the category of the metrics to be filtered. E.g., "CapacityUtilization". Valid values are the ones returned as the field "category" in the ListMetricDefinitions call. Only 'Equality' operator is supported for this property.
	Category *string `json:"category,omitempty"`
	// Dimensions - Specifies the source(the dimension) of the metrics to be filtered. Only 'Equality' operator is supported for this property.
	Dimensions *DimensionFilter `json:"dimensions,omitempty"`
}

// MetricList the metric list.
type MetricList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]Metrics `json:"value,omitempty"`
}

// MetricName the metric name.
type MetricName struct {
	// Value - The metric name.
	Value *string `json:"value,omitempty"`
	// LocalizedValue - The localized metric name.
	LocalizedValue *string `json:"localizedValue,omitempty"`
}

// MetricNameFilter the metric name filter, specifying the name of the metric to be filtered on.
type MetricNameFilter struct {
	// Value - Specifies the metric name to be filtered on. E.g., CloudStorageUsed. Valid values are the ones returned in the field "name" in the ListMetricDefinitions call. Only 'Equality' operator is supported for this property.
	Value *string `json:"value,omitempty"`
}

// Metrics the monitoring metric.
type Metrics struct {
	// ResourceID - The ID of metric source.
	ResourceID *string `json:"resourceId,omitempty"`
	// StartTime - The start time of the metric data.
	StartTime *date.Time `json:"startTime,omitempty"`
	// EndTime - The end time of the metric data.
	EndTime *date.Time `json:"endTime,omitempty"`
	// TimeGrain - The time granularity of the metric data.
	TimeGrain *string `json:"timeGrain,omitempty"`
	// PrimaryAggregation - The metric aggregation type. Possible values include: 'MetricAggregationTypeAverage', 'MetricAggregationTypeLast', 'MetricAggregationTypeMaximum', 'MetricAggregationTypeMinimum', 'MetricAggregationTypeNone', 'MetricAggregationTypeTotal'
	PrimaryAggregation MetricAggregationType `json:"primaryAggregation,omitempty"`
	// Name - The name of the metric.
	Name *MetricName `json:"name,omitempty"`
	// Dimensions - The metric dimensions.
	Dimensions *[]MetricDimension `json:"dimensions,omitempty"`
	// Unit - The unit of the metric data. Possible values include: 'Bytes', 'BytesPerSecond', 'Count', 'CountPerSecond', 'Percent', 'Seconds'
	Unit MetricUnit `json:"unit,omitempty"`
	// Type - The type of the metric data.
	Type *string `json:"type,omitempty"`
	// Values - The list of the metric data.
	Values *[]MetricData `json:"values,omitempty"`
}

// NetworkAdapterList the collection of network adapters on the device.
type NetworkAdapterList struct {
	// Value - The value.
	Value *[]NetworkAdapters `json:"value,omitempty"`
}

// NetworkAdapters represents the network adapter on device.
type NetworkAdapters struct {
	// InterfaceID - The ID of the network adapter. Possible values include: 'NetInterfaceIDInvalid', 'NetInterfaceIDData0', 'NetInterfaceIDData1', 'NetInterfaceIDData2', 'NetInterfaceIDData3', 'NetInterfaceIDData4', 'NetInterfaceIDData5'
	InterfaceID NetInterfaceID `json:"interfaceId,omitempty"`
	// NetInterfaceStatus - Value indicating status of network adapter. Possible values include: 'NetInterfaceStatusEnabled', 'NetInterfaceStatusDisabled'
	NetInterfaceStatus NetInterfaceStatus `json:"netInterfaceStatus,omitempty"`
	// IsDefault - Value indicating whether this instance is default.
	IsDefault *bool `json:"isDefault,omitempty"`
	// IscsiAndCloudStatus - Value indicating cloud and ISCSI status of network adapter. Possible values include: 'ISCSIAndCloudStatusDisabled', 'ISCSIAndCloudStatusIscsiEnabled', 'ISCSIAndCloudStatusCloudEnabled', 'ISCSIAndCloudStatusIscsiAndCloudEnabled'
	IscsiAndCloudStatus ISCSIAndCloudStatus `json:"iscsiAndCloudStatus,omitempty"`
	// Speed - The speed of the network adapter.
	Speed *int64 `json:"speed,omitempty"`
	// Mode - The mode of network adapter, either IPv4, IPv6 or both. Possible values include: 'NetworkModeInvalid', 'NetworkModeIPV4', 'NetworkModeIPV6', 'NetworkModeBOTH'
	Mode NetworkMode `json:"mode,omitempty"`
	// NicIpv4Settings - The IPv4 configuration of the network adapter.
	NicIpv4Settings *NicIPv4 `json:"nicIpv4Settings,omitempty"`
	// NicIpv6Settings - The IPv6 configuration of the network adapter.
	NicIpv6Settings *NicIPv6 `json:"nicIpv6Settings,omitempty"`
}

// NetworkInterfaceData0Settings the 'Data 0' network interface card settings.
type NetworkInterfaceData0Settings struct {
	// ControllerZeroIP - The controller 0's IPv4 address.
	ControllerZeroIP *string `json:"controllerZeroIp,omitempty"`
	// ControllerOneIP - The controller 1's IPv4 address.
	ControllerOneIP *string `json:"controllerOneIp,omitempty"`
}

// NetworkSettings represents the network settings of a device.
type NetworkSettings struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// NetworkSettingsProperties - The properties of network settings of a device.
	*NetworkSettingsProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for NetworkSettings struct.
func (ns *NetworkSettings) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties NetworkSettingsProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		ns.NetworkSettingsProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		ns.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		ns.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		ns.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		ns.Kind = kind
	}

	return nil
}

// NetworkSettingsPatch represents the patch request for the network settings of a device.
type NetworkSettingsPatch struct {
	// NetworkSettingsPatchProperties - The properties of the network settings patch.
	*NetworkSettingsPatchProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for NetworkSettingsPatch struct.
func (nsp *NetworkSettingsPatch) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties NetworkSettingsPatchProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		nsp.NetworkSettingsPatchProperties = &properties
	}

	return nil
}

// NetworkSettingsPatchProperties the properties of the network settings patch.
type NetworkSettingsPatchProperties struct {
	// DNSSettings - The DNS (Domain Name System) settings of device.
	DNSSettings *DNSSettings `json:"dnsSettings,omitempty"`
	// NetworkAdapters - The network adapter list of device.
	NetworkAdapters *NetworkAdapterList `json:"networkAdapters,omitempty"`
}

// NetworkSettingsProperties the properties of the network settings of device.
type NetworkSettingsProperties struct {
	// DNSSettings - The DNS (Domain Name System) settings of device.
	DNSSettings *DNSSettings `json:"dnsSettings,omitempty"`
	// NetworkAdapters - The network adapter list of device.
	NetworkAdapters *NetworkAdapterList `json:"networkAdapters,omitempty"`
	// WebproxySettings - The webproxy settings of device.
	WebproxySettings *WebproxySettings `json:"webproxySettings,omitempty"`
}

// NicIPv4 details related to the IPv4 address configuration.
type NicIPv4 struct {
	// Ipv4Address - The IPv4 address of the network adapter.
	Ipv4Address *string `json:"ipv4Address,omitempty"`
	// Ipv4Netmask - The IPv4 netmask of the network adapter.
	Ipv4Netmask *string `json:"ipv4Netmask,omitempty"`
	// Ipv4Gateway - The IPv4 gateway of the network adapter.
	Ipv4Gateway *string `json:"ipv4Gateway,omitempty"`
	// Controller0Ipv4Address - The IPv4 address of Controller0.
	Controller0Ipv4Address *string `json:"controller0Ipv4Address,omitempty"`
	// Controller1Ipv4Address - The IPv4 address of Controller1.
	Controller1Ipv4Address *string `json:"controller1Ipv4Address,omitempty"`
}

// NicIPv6 details related to the IPv6 address configuration.
type NicIPv6 struct {
	// Ipv6Address - The IPv6 address of the network adapter.
	Ipv6Address *string `json:"ipv6Address,omitempty"`
	// Ipv6Prefix - The IPv6 prefix of the network adapter.
	Ipv6Prefix *string `json:"ipv6Prefix,omitempty"`
	// Ipv6Gateway - The IPv6 gateway of the network adapter.
	Ipv6Gateway *string `json:"ipv6Gateway,omitempty"`
	// Controller0Ipv6Address - The IPv6 address of Controller0.
	Controller0Ipv6Address *string `json:"controller0Ipv6Address,omitempty"`
	// Controller1Ipv6Address - The IPv6 address of Controller1.
	Controller1Ipv6Address *string `json:"controller1Ipv6Address,omitempty"`
}

// PublicKey the public key.
type PublicKey struct {
	autorest.Response `json:"-"`
	// Key - The key.
	Key *string `json:"key,omitempty"`
}

// RemoteManagementSettings the settings for remote management of a device.
type RemoteManagementSettings struct {
	// RemoteManagementMode - The remote management mode. Possible values include: 'RemoteManagementModeConfigurationUnknown', 'RemoteManagementModeConfigurationDisabled', 'RemoteManagementModeConfigurationHTTPSEnabled', 'RemoteManagementModeConfigurationHTTPSAndHTTPEnabled'
	RemoteManagementMode RemoteManagementModeConfiguration `json:"remoteManagementMode,omitempty"`
	// RemoteManagementCertificate - The remote management certificates.
	RemoteManagementCertificate *string `json:"remoteManagementCertificate,omitempty"`
}

// RemoteManagementSettingsPatch the settings for updating remote management mode of the device.
type RemoteManagementSettingsPatch struct {
	// RemoteManagementMode - The remote management mode. Possible values include: 'RemoteManagementModeConfigurationUnknown', 'RemoteManagementModeConfigurationDisabled', 'RemoteManagementModeConfigurationHTTPSEnabled', 'RemoteManagementModeConfigurationHTTPSAndHTTPEnabled'
	RemoteManagementMode RemoteManagementModeConfiguration `json:"remoteManagementMode,omitempty"`
}

// Resource the Azure Resource.
type Resource struct {
	// ID - The resource ID.
	ID *string `json:"id,omitempty"`
	// Name - The resource name.
	Name *string `json:"name,omitempty"`
	// Type - The resource type.
	Type *string `json:"type,omitempty"`
	// Location - The geo location of the resource.
	Location *string `json:"location,omitempty"`
	// Tags - The tags attached to the resource.
	Tags *map[string]*string `json:"tags,omitempty"`
}

// ScheduleRecurrence the schedule recurrence.
type ScheduleRecurrence struct {
	// RecurrenceType - The recurrence type. Possible values include: 'Minutes', 'Hourly', 'Daily', 'Weekly'
	RecurrenceType RecurrenceType `json:"recurrenceType,omitempty"`
	// RecurrenceValue - The recurrence value.
	RecurrenceValue *int32 `json:"recurrenceValue,omitempty"`
	// WeeklyDaysList - The week days list. Applicable only for schedules of recurrence type 'weekly'.
	WeeklyDaysList *[]DayOfWeek `json:"weeklyDaysList,omitempty"`
}

// SecondaryDNSSettings the secondary DNS settings.
type SecondaryDNSSettings struct {
	// SecondaryDNSServers - The list of secondary DNS Server IP addresses.
	SecondaryDNSServers *[]string `json:"secondaryDnsServers,omitempty"`
}

// SecuritySettings the security settings of a device.
type SecuritySettings struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// SecuritySettingsProperties - The properties of the security settings of a device.
	*SecuritySettingsProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for SecuritySettings struct.
func (ss *SecuritySettings) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties SecuritySettingsProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		ss.SecuritySettingsProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		ss.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		ss.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		ss.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		ss.Kind = kind
	}

	return nil
}

// SecuritySettingsPatch represents the patch request for the security settings of a device.
type SecuritySettingsPatch struct {
	// SecuritySettingsPatchProperties - The properties of the security settings patch.
	*SecuritySettingsPatchProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for SecuritySettingsPatch struct.
func (ssp *SecuritySettingsPatch) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties SecuritySettingsPatchProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		ssp.SecuritySettingsPatchProperties = &properties
	}

	return nil
}

// SecuritySettingsPatchProperties the properties of the security settings patch.
type SecuritySettingsPatchProperties struct {
	// RemoteManagementSettings - The remote management settings.
	RemoteManagementSettings *RemoteManagementSettingsPatch `json:"remoteManagementSettings,omitempty"`
	// DeviceAdminPassword - The device administrator password.
	DeviceAdminPassword *AsymmetricEncryptedSecret `json:"deviceAdminPassword,omitempty"`
	// SnapshotPassword - The snapshot manager password.
	SnapshotPassword *AsymmetricEncryptedSecret `json:"snapshotPassword,omitempty"`
	// ChapSettings - The device CHAP and reverse-CHAP settings.
	ChapSettings *ChapSettings `json:"chapSettings,omitempty"`
	// CloudApplianceSettings - The cloud appliance settings.
	CloudApplianceSettings *CloudApplianceSettings `json:"cloudApplianceSettings,omitempty"`
}

// SecuritySettingsProperties the properties of security settings of a device.
type SecuritySettingsProperties struct {
	// RemoteManagementSettings - The settings for remote management of a device.
	RemoteManagementSettings *RemoteManagementSettings `json:"remoteManagementSettings,omitempty"`
	// ChapSettings - The Challenge-Handshake Authentication Protocol (CHAP) settings.
	ChapSettings *ChapSettings `json:"chapSettings,omitempty"`
}

// SendTestAlertEmailRequest the request for sending test alert email
type SendTestAlertEmailRequest struct {
	// EmailList - The list of email IDs to send the test alert email
	EmailList *[]string `json:"emailList,omitempty"`
}

// StorageAccountCredential the storage account credential.
type StorageAccountCredential struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// StorageAccountCredentialProperties - The storage account credential properties.
	*StorageAccountCredentialProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for StorageAccountCredential struct.
func (sac *StorageAccountCredential) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties StorageAccountCredentialProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		sac.StorageAccountCredentialProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		sac.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		sac.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		sac.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		sac.Kind = kind
	}

	return nil
}

// StorageAccountCredentialList the collection of storage account credential entities.
type StorageAccountCredentialList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]StorageAccountCredential `json:"value,omitempty"`
}

// StorageAccountCredentialProperties the storage account credential properties.
type StorageAccountCredentialProperties struct {
	// EndPoint - The storage endpoint
	EndPoint *string `json:"endPoint,omitempty"`
	// SslStatus - Signifies whether SSL needs to be enabled or not. Possible values include: 'SslStatusEnabled', 'SslStatusDisabled'
	SslStatus SslStatus `json:"sslStatus,omitempty"`
	// AccessKey - The details of the storage account password.
	AccessKey *AsymmetricEncryptedSecret `json:"accessKey,omitempty"`
	// VolumesCount - The count of volumes using this storage account credential.
	VolumesCount *int32 `json:"volumesCount,omitempty"`
}

// StorageAccountCredentialsCreateOrUpdateFuture an abstraction for monitoring and retrieving the results of a
// long-running operation.
type StorageAccountCredentialsCreateOrUpdateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future StorageAccountCredentialsCreateOrUpdateFuture) Result(client StorageAccountCredentialsClient) (sac StorageAccountCredential, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return sac, autorest.NewError("storsimple.StorageAccountCredentialsCreateOrUpdateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		sac, err = client.CreateOrUpdateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	sac, err = client.CreateOrUpdateResponder(resp)
	return
}

// StorageAccountCredentialsDeleteFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type StorageAccountCredentialsDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future StorageAccountCredentialsDeleteFuture) Result(client StorageAccountCredentialsClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.StorageAccountCredentialsDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// SymmetricEncryptedSecret represents the secrets encrypted using Symmetric Encryption Key.
type SymmetricEncryptedSecret struct {
	autorest.Response `json:"-"`
	// Value - The value of the secret itself. If the secret is in plaintext or null then EncryptionAlgorithm will be none.
	Value *string `json:"value,omitempty"`
	// ValueCertificateThumbprint - The thumbprint of the cert that was used to encrypt "Value".
	ValueCertificateThumbprint *string `json:"valueCertificateThumbprint,omitempty"`
	// EncryptionAlgorithm - The algorithm used to encrypt the "Value". Possible values include: 'EncryptionAlgorithmNone', 'EncryptionAlgorithmAES256', 'EncryptionAlgorithmRSAESPKCS1V15'
	EncryptionAlgorithm EncryptionAlgorithm `json:"encryptionAlgorithm,omitempty"`
}

// TargetEligibilityErrorMessage the error/warning message due to which the device is ineligible as a failover target
// device.
type TargetEligibilityErrorMessage struct {
	// Message - The localized error message stating the reason why the device is not eligible as a target device.
	Message *string `json:"message,omitempty"`
	// Resolution - The localized resolution message for the error.
	Resolution *string `json:"resolution,omitempty"`
	// ResultCode - The result code for the error, due to which the device does not qualify as a failover target device. Possible values include: 'TargetAndSourceCannotBeSameError', 'TargetIsNotOnlineError', 'TargetSourceIncompatibleVersionError', 'LocalToTieredVolumesConversionWarning', 'TargetInsufficientCapacityError', 'TargetInsufficientLocalVolumeMemoryError', 'TargetInsufficientTieredVolumeMemoryError'
	ResultCode TargetEligibilityResultCode `json:"resultCode,omitempty"`
}

// TargetEligibilityResult the eligibility result of device, as a failover target device.
type TargetEligibilityResult struct {
	// EligibilityStatus - The eligibility status of device, as a failover target device. Possible values include: 'TargetEligibilityStatusNotEligible', 'TargetEligibilityStatusEligible'
	EligibilityStatus TargetEligibilityStatus `json:"eligibilityStatus,omitempty"`
	// Messages - The list of error messages, if a device does not qualify as a failover target device.
	Messages *[]TargetEligibilityErrorMessage `json:"messages,omitempty"`
}

// Time the time.
type Time struct {
	// Hours - The hour.
	Hours *int32 `json:"hours,omitempty"`
	// Minutes - The minute.
	Minutes *int32 `json:"minutes,omitempty"`
	// Seconds - The second.
	Seconds *int32 `json:"seconds,omitempty"`
}

// TimeSettings the time settings of a device.
type TimeSettings struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// TimeSettingsProperties - The properties of the time settings of a device.
	*TimeSettingsProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for TimeSettings struct.
func (ts *TimeSettings) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties TimeSettingsProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		ts.TimeSettingsProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		ts.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		ts.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		ts.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		ts.Kind = kind
	}

	return nil
}

// TimeSettingsProperties the properties of time settings of a device.
type TimeSettingsProperties struct {
	// TimeZone - The timezone of device, like '(UTC -06:00) Central America'
	TimeZone *string `json:"timeZone,omitempty"`
	// PrimaryTimeServer - The primary Network Time Protocol (NTP) server name, like 'time.windows.com'.
	PrimaryTimeServer *string `json:"primaryTimeServer,omitempty"`
	// SecondaryTimeServer - The secondary Network Time Protocol (NTP) server name, like 'time.contoso.com'. It's optional.
	SecondaryTimeServer *[]string `json:"secondaryTimeServer,omitempty"`
}

// Updates the updates profile of a device.
type Updates struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// UpdatesProperties - The properties of the updates profile.
	*UpdatesProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for Updates struct.
func (u *Updates) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties UpdatesProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		u.UpdatesProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		u.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		u.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		u.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		u.Kind = kind
	}

	return nil
}

// UpdatesProperties the properties of the updates profile.
type UpdatesProperties struct {
	// RegularUpdatesAvailable - Set to 'true' if regular updates are available for the device.
	RegularUpdatesAvailable *bool `json:"regularUpdatesAvailable,omitempty"`
	// MaintenanceModeUpdatesAvailable - Set to 'true' if maintenance mode update available.
	MaintenanceModeUpdatesAvailable *bool `json:"maintenanceModeUpdatesAvailable,omitempty"`
	// IsUpdateInProgress - Indicates whether an update is in progress or not.
	IsUpdateInProgress *bool `json:"isUpdateInProgress,omitempty"`
	// LastUpdatedTime - The time when the last update was completed.
	LastUpdatedTime *date.Time `json:"lastUpdatedTime,omitempty"`
}

// VMImage the virtual machine image.
type VMImage struct {
	// Name - The name.
	Name *string `json:"name,omitempty"`
	// Version - The version.
	Version *string `json:"version,omitempty"`
	// Offer - The offer.
	Offer *string `json:"offer,omitempty"`
	// Publisher - The publisher.
	Publisher *string `json:"publisher,omitempty"`
	// Sku - The SKU.
	Sku *string `json:"sku,omitempty"`
}

// Volume the volume.
type Volume struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// VolumeProperties - The properties of the volume.
	*VolumeProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for Volume struct.
func (vVar *Volume) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties VolumeProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		vVar.VolumeProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		vVar.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		vVar.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		vVar.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		vVar.Kind = kind
	}

	return nil
}

// VolumeContainer the volume container.
type VolumeContainer struct {
	autorest.Response `json:"-"`
	// ID - The path ID that uniquely identifies the object.
	ID *string `json:"id,omitempty"`
	// Name - The name of the object.
	Name *string `json:"name,omitempty"`
	// Type - The hierarchical type of the object.
	Type *string `json:"type,omitempty"`
	// Kind - The Kind of the object. Currently only Series8000 is supported. Possible values include: 'Series8000'
	Kind Kind `json:"kind,omitempty"`
	// VolumeContainerProperties - The volume container properties.
	*VolumeContainerProperties `json:"properties,omitempty"`
}

// UnmarshalJSON is the custom unmarshaler for VolumeContainer struct.
func (vc *VolumeContainer) UnmarshalJSON(body []byte) error {
	var m map[string]*json.RawMessage
	err := json.Unmarshal(body, &m)
	if err != nil {
		return err
	}
	var v *json.RawMessage

	v = m["properties"]
	if v != nil {
		var properties VolumeContainerProperties
		err = json.Unmarshal(*m["properties"], &properties)
		if err != nil {
			return err
		}
		vc.VolumeContainerProperties = &properties
	}

	v = m["id"]
	if v != nil {
		var ID string
		err = json.Unmarshal(*m["id"], &ID)
		if err != nil {
			return err
		}
		vc.ID = &ID
	}

	v = m["name"]
	if v != nil {
		var name string
		err = json.Unmarshal(*m["name"], &name)
		if err != nil {
			return err
		}
		vc.Name = &name
	}

	v = m["type"]
	if v != nil {
		var typeVar string
		err = json.Unmarshal(*m["type"], &typeVar)
		if err != nil {
			return err
		}
		vc.Type = &typeVar
	}

	v = m["kind"]
	if v != nil {
		var kind Kind
		err = json.Unmarshal(*m["kind"], &kind)
		if err != nil {
			return err
		}
		vc.Kind = kind
	}

	return nil
}

// VolumeContainerFailoverMetadata the metadata of the volume container, that is being considered as part of a failover
// set.
type VolumeContainerFailoverMetadata struct {
	// VolumeContainerID - The path ID of the volume container.
	VolumeContainerID *string `json:"volumeContainerId,omitempty"`
	// Volumes - The list of metadata of volumes inside the volume container, which contains valid cloud snapshots.
	Volumes *[]VolumeFailoverMetadata `json:"volumes,omitempty"`
}

// VolumeContainerList the collection of volume container entities.
type VolumeContainerList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]VolumeContainer `json:"value,omitempty"`
}

// VolumeContainerProperties the properties of volume container.
type VolumeContainerProperties struct {
	// EncryptionKey - The key used to encrypt data in the volume container. It is required when property 'EncryptionStatus' is "Enabled".
	EncryptionKey *AsymmetricEncryptedSecret `json:"encryptionKey,omitempty"`
	// EncryptionStatus - The flag to denote whether encryption is enabled or not. Possible values include: 'EncryptionStatusEnabled', 'EncryptionStatusDisabled'
	EncryptionStatus EncryptionStatus `json:"encryptionStatus,omitempty"`
	// VolumeCount - The number of volumes in the volume Container.
	VolumeCount *int32 `json:"volumeCount,omitempty"`
	// StorageAccountCredentialID - The path ID of storage account associated with the volume container.
	StorageAccountCredentialID *string `json:"storageAccountCredentialId,omitempty"`
	// OwnerShipStatus - The owner ship status of the volume container. Only when the status is "NotOwned", the delete operation on the volume container is permitted. Possible values include: 'Owned', 'NotOwned'
	OwnerShipStatus OwnerShipStatus `json:"ownerShipStatus,omitempty"`
	// BandWidthRateInMbps - The bandwidth-rate set on the volume container.
	BandWidthRateInMbps *int32 `json:"bandWidthRateInMbps,omitempty"`
	// BandwidthSettingID - The ID of the bandwidth setting associated with the volume container.
	BandwidthSettingID *string `json:"bandwidthSettingId,omitempty"`
	// TotalCloudStorageUsageInBytes - The total cloud storage for the volume container.
	TotalCloudStorageUsageInBytes *int64 `json:"totalCloudStorageUsageInBytes,omitempty"`
}

// VolumeContainersCreateOrUpdateFuture an abstraction for monitoring and retrieving the results of a long-running
// operation.
type VolumeContainersCreateOrUpdateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future VolumeContainersCreateOrUpdateFuture) Result(client VolumeContainersClient) (vc VolumeContainer, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return vc, autorest.NewError("storsimple.VolumeContainersCreateOrUpdateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		vc, err = client.CreateOrUpdateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	vc, err = client.CreateOrUpdateResponder(resp)
	return
}

// VolumeContainersDeleteFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type VolumeContainersDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future VolumeContainersDeleteFuture) Result(client VolumeContainersClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.VolumeContainersDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// VolumeFailoverMetadata the metadata of a volume that has valid cloud snapshot.
type VolumeFailoverMetadata struct {
	// VolumeID - The path ID of the volume.
	VolumeID *string `json:"volumeId,omitempty"`
	// VolumeType - The type of the volume. Possible values include: 'Tiered', 'Archival', 'LocallyPinned'
	VolumeType VolumeType `json:"volumeType,omitempty"`
	// SizeInBytes - The size of the volume in bytes at the time the snapshot was taken.
	SizeInBytes *int64 `json:"sizeInBytes,omitempty"`
	// BackupCreatedDate - The date at which the snapshot was taken.
	BackupCreatedDate *date.Time `json:"backupCreatedDate,omitempty"`
	// BackupElementID - The path ID of the backup-element for this volume, inside the backup set.
	BackupElementID *string `json:"backupElementId,omitempty"`
	// BackupID - The path ID of the backup set.
	BackupID *string `json:"backupId,omitempty"`
	// BackupPolicyID - The path ID of the backup policy using which the snapshot was taken.
	BackupPolicyID *string `json:"backupPolicyId,omitempty"`
}

// VolumeList the collection of volumes.
type VolumeList struct {
	autorest.Response `json:"-"`
	// Value - The value.
	Value *[]Volume `json:"value,omitempty"`
}

// VolumeProperties the properties of volume.
type VolumeProperties struct {
	// SizeInBytes - The size of the volume in bytes.
	SizeInBytes *int64 `json:"sizeInBytes,omitempty"`
	// VolumeType - The type of the volume. Possible values include: 'Tiered', 'Archival', 'LocallyPinned'
	VolumeType VolumeType `json:"volumeType,omitempty"`
	// VolumeContainerID - The ID of the volume container, in which this volume is created.
	VolumeContainerID *string `json:"volumeContainerId,omitempty"`
	// AccessControlRecordIds - The IDs of the access control records, associated with the volume.
	AccessControlRecordIds *[]string `json:"accessControlRecordIds,omitempty"`
	// VolumeStatus - The volume status. Possible values include: 'VolumeStatusOnline', 'VolumeStatusOffline'
	VolumeStatus VolumeStatus `json:"volumeStatus,omitempty"`
	// OperationStatus - The operation status on the volume. Possible values include: 'OperationStatusNone', 'OperationStatusUpdating', 'OperationStatusDeleting', 'OperationStatusRestoring'
	OperationStatus OperationStatus `json:"operationStatus,omitempty"`
	// BackupStatus - The backup status of the volume. Possible values include: 'BackupStatusEnabled', 'BackupStatusDisabled'
	BackupStatus BackupStatus `json:"backupStatus,omitempty"`
	// MonitoringStatus - The monitoring status of the volume. Possible values include: 'MonitoringStatusEnabled', 'MonitoringStatusDisabled'
	MonitoringStatus MonitoringStatus `json:"monitoringStatus,omitempty"`
	// BackupPolicyIds - The IDs of the backup policies, in which this volume is part of.
	BackupPolicyIds *[]string `json:"backupPolicyIds,omitempty"`
}

// VolumesCreateOrUpdateFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type VolumesCreateOrUpdateFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future VolumesCreateOrUpdateFuture) Result(client VolumesClient) (vVar Volume, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return vVar, autorest.NewError("storsimple.VolumesCreateOrUpdateFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		vVar, err = client.CreateOrUpdateResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	vVar, err = client.CreateOrUpdateResponder(resp)
	return
}

// VolumesDeleteFuture an abstraction for monitoring and retrieving the results of a long-running operation.
type VolumesDeleteFuture struct {
	azure.Future
	req *http.Request
}

// Result returns the result of the asynchronous operation.
// If the operation has not completed it will return an error.
func (future VolumesDeleteFuture) Result(client VolumesClient) (ar autorest.Response, err error) {
	var done bool
	done, err = future.Done(client)
	if err != nil {
		return
	}
	if !done {
		return ar, autorest.NewError("storsimple.VolumesDeleteFuture", "Result", "asynchronous operation has not completed")
	}
	if future.PollingMethod() == azure.PollingLocation {
		ar, err = client.DeleteResponder(future.Response())
		return
	}
	var resp *http.Response
	resp, err = autorest.SendWithSender(client, autorest.ChangeToGet(future.req),
		autorest.DoRetryForStatusCodes(client.RetryAttempts, client.RetryDuration, autorest.StatusCodesForRetry...))
	if err != nil {
		return
	}
	ar, err = client.DeleteResponder(resp)
	return
}

// WebproxySettings the web proxy settings on the device.
type WebproxySettings struct {
	// ConnectionURI - The connection URI.
	ConnectionURI *string `json:"connectionUri,omitempty"`
	// Authentication - The authentication type. Possible values include: 'Invalid', 'None', 'Basic', 'NTLM'
	Authentication AuthenticationType `json:"authentication,omitempty"`
	// Username - The webproxy username.
	Username *string `json:"username,omitempty"`
}