Skip to content

jenkinsci/venafi-codesigning-plugin

Venafi CodeSign Protect plugin for Jenkins

This plugin integrates Venafi CodeSign Protect with Jenkins-based CI/CD processes.

Venafi CodeSign Protect is a solution for securing machines against attacks and exploits, by signing executables, libraries and other machine runtime artifacts with digital signatures. Unlike naive methods of code signing, Venafi CodeSign Protect is more secure, by storing and securing the signing key separately from the CI/CD infrastructure (perhaps even in a Hardware Security Module) and by providing access control to signing keys. It also provides important insights to security teams, such as how and when signing keys are used.

This plugin allows one to sign and verify files through Venafi CodeSign Protect. The following signing tools are supported:

  • Jarsigner (Java)
  • Signtool (Windows)

Table of contents

Setup & usage overview

You must already have access to one or more Venafi TLS Protect Datacenter™ environments (formerly known as Trust Protection Platform, in short TPPs). This plugin requires you to configure TPP address and authentication details.

This plugin works by shelling out to the Venafi CodeSign Protect client tools, on the node(s) on which Jenkins jobs execute. Therefore, you must already have the CodeSign Protect client tools installed on these nodes. The plugin will not install them for you.

Note that there are some caveats w.r.t. client tools installation and security to be aware of.

You do not need to configure the client tools (i.e. they don't need to be configured with a TPP address or credentials). They just need to be installed. This plugin will take care of configuring the client tools with specific TPPs.

Once the aforementioned are set up, go to TPP configuration. You are then ready to proceed with main usage: see Build steps & pipeline functions.

Compatibility

This plugin is compatible with:

  • TLS Protect Datacenter (formerly known as Trust Protection Platform) 20.2 or later.
  • Venafi CodeSign Protect client tools 20.2 or later.

⚠️ If you are upgrading to version 1.2.1, don´t forget to reconfigure your credentials.

Role strategy integration

In shared environments you may want to protect your code signing credentials and ensure nobody can use these credentials. By default, Jenkins System level credentials are available for every job to consume, which can raise a non-desirable situation. We support using Folder level credentials, but do require an additional plugin like the Role-based Authorization Strategy. Leveraging the Role-based Authorization you can easily protect your code signing credentials.

Client tools installation caveats

The Venafi CodeSign Protect client tools manual for Java, may instruct you to register its PKCS11 security provider inside java.security. Do not do this, because it may prevent Jenkins, or a Jenkins slave agent, from starting.

If you see an error like this, then it's a sign that you need to unregister the Venafi CodeSign Protect client tools PKCS11 security provider from java.security:

Loaded: "/opt/venafi/codesign/lib/venafipkcs11.so"

...

3: C_Initialize
2020-03-18 19:56:02.940
[in] pInitArgs = (nil)
Returned:  5 CKR_GENERAL_ERROR

TPP configuration

This plugin requires that you define which TPPs are available and how to connect to them. Since version 1.2.x credentials are part of the build configuration, for both freestyle projects and pipeline functions.

Inside Jenkins, go to Manage Jenkins âžś Configure System. Scroll down to "Venafi Code Signing" and define your TPPs there.

Security & master-slave node setup

We strongly recommend that you execute your Jenkins jobs inside Jenkins slave nodes, not on the Jenkins master node.

When you execute jobs on the Jenkins master node, it's possible for malicious jobs to access Jenkins' secrets by reading Jenkins' configuration files. This means that malicious jobs are, for example, able to steal TPP credentials.

See also:

Build steps & pipeline functions

All operations listed here are compatible with both freestyle projects (Build steps) as well as pipeline projects (Pipeline functions).

Sign with Jarsigner (venafiCodeSignWithJarSigner)

Signs one or more files with Java's Jarsigner tool. It assumes that jarsigner is in PATH.

Example pipeline usage

// Sign a single .jar file
venafiCodeSignWithJarSigner tppName: 'Main Demo Server',
    file: 'foo.jar',
    certLabel: 'my label',
    credential: [credentialsId: '669b87ac-48f2-47db-900e-5255bd08493a']

// Sign multiple .jar files with a glob
venafiCodeSignWithJarSigner tppName: 'Main Demo Server',
    glob: '*.jar',
    certLabel: 'my label',
    credential: [credentialsId: '669b87ac-48f2-47db-900e-5255bd08493a']

Required pipeline parameters

  • tppName: The Venafi TLS Protect Datacenter (formerly known as TPP) to use for signing.
  • file or glob: Specifies the file(s) to sign, either through a single filename, or a glob.
  • certLabel: The label of the certificate (inside the TPP) to use for code signing. You can obtain a list of labels with pkcs11config listcertificates.
  • credential: An array that contains the credentialsId of the stored credential to use. This can be either stored at System or Folder level.

Optional pipeline parameters

  • timestampingServers: Specifies one or more timestamping authority servers to use during signing. Specifying this is strongly recommended, because it allows signed files to be usable even after the original signing certificate has expired.

    If you specify more than one server, then a random one will be used.

    Example:

    venafiCodeSignWithJarSigner ..., timestampingServers: [
        [address: 'http://server1'],
        [address: 'http://server2']
    ]

    Tip: here are some public timestamping authorities that you can use:

  • extraArgs: Specifies extra custom CLI arguments to pass to Jarsigner.

    These arguments will be appended to the Jarsigner CLI invocation, and take precedence over any arguments implicitly passed by this plugin.

    Example:

    venafiCodeSignWithJarSigner ..., extraArgs: [
        [argument: '-arg1'],
        [argument: '-arg2']
    ]
  • venafiClientToolsDir: Specifies the path to the directory in which Venafi CodeSign Protect client tools are installed. If not specified, it's autodetected as follows:

    • Linux: /opt/venafi/codesign
    • macOS: /Library/Venafi/CodeSigning
    • Windows: autodetected from the registry, or (if that fails): C:\Program Files\Venafi CodeSign Protect

Verify with Jarsigner (venafiVerifyWithJarSigner)

Verifies one or more files with Java's Jarsigner tool. It assumes that jarsigner is in PATH.

The node which performs the verification does not need to have pre-installed the certificate against which to verify. This function will fetch the certificate from the TPP, which is why it requires a certificate label.

Example pipeline usage

// Verify a single .jar file
venafiVerifyWithJarSigner tppName: 'Main Demo Server',
    file: 'foo.jar',
    certLabel: 'my label',
    credential: [credentialsId: '669b87ac-48f2-47db-900e-5255bd08493a']

// Verify multiple .jar files with a glob
venafiVerifyWithJarSigner tppName: 'Main Demo Server',
    glob: '*.jar',
    certLabel: 'my label',
    credential: [credentialsId: '669b87ac-48f2-47db-900e-5255bd08493a']

Required pipeline parameters

  • tppName: The Venafi TLS Protect Datacenter (formerly known as TPP) that contains the certificate that the signed file(s) were signed by.
  • file or glob: Specifies the file(s) to verify, either through a single filename, or a glob.
  • certLabel: The label of the certificate (inside the TPP) that was used for signing the file(s). You can obtain a list of labels with pkcs11config listcertificates.
  • credential: An array that contains the credentialsId of the stored credential to use. This can be either stored at System or Folder level.

Optional pipeline parameters

  • venafiClientToolsDir: Specifies the path to the directory in which Venafi CodeSign Protect client tools are installed. If not specified, it's autodetected as follows:

    • Linux: /opt/venafi/codesign
    • macOS: /Library/Venafi/CodeSigning
    • Windows: autodetected from the registry, or (if that fails): C:\Program Files\Venafi CodeSign Protect

Sign with Signtool (venafiCodeSignWithSignTool)

Signs one or more files with Microsoft's Signtool tool.

Important notes:

  • It assumes that signtool.exe is in PATH, unless you explicitly specify its path with signToolPath.
  • We use 'sha256' as the default signature digest algorithm, unlike Signtool's default ('sha1'). You may want to override this if you care about compatibility with older Windows versions that didn't support SHA-256.

Example pipeline usage

venafiCodeSignWithSignTool tppName: 'Main Demo Server',
    fileOrGlob: 'foo.exe',
    subjectName: 'mydomain.com',
    credential: [credentialsId: '669b87ac-48f2-47db-900e-5255bd08493a'],
    timestampingServers: [[address: 'http://timestamp.digicert.com']]

Required pipeline parameters

  • tppName: The Venafi TLS Protect Datacenter (formerly known as TPP) to use for signing.

  • fileOrGlob: A path or a glob that specifies the file(s) to be signed.

  • subjectName or sha1: Specifies the certificate (inside the TPP) to use for signing.

  • credential: An array that contains the credentialsId of the stored credential to use. This can be either stored at System or Folder level.

    You can either specify the certificate's Common Name ("Issued to" or "CN"), or its SHA-1 hash.

    You can obtain a list of Common Names with cspconfig listcertificates and checking what comes after CN=.

    Specifying the SHA-1 hash is useful if there are multiple certificates with the same Common Name.

Optional pipeline parameters

  • timestampingServers: Specifies one or more timestamping authority servers to use during signing. Specifying this is strongly recommended, because it allows signed files to be usable even after the original signing certificate has expired.

    If you specify more than one server, then a random one will be used.

    Example:

    venafiCodeSignWithSignTool ..., timestampingServers: [
        [address: 'http://server1'],
        [address: 'http://server2']
    ]

    Tip: here are some public timestamping authorities that you can use:

  • signatureDigestAlgos: The digest algorithm(s) to use to creating signatures.

    If none specified, 'sha256' is used as the default algorithm. This is very secure, but may not be compatible with older Windows versions. If you need compatibility with older Windows versions, you should specify 'sha1' and 'sha256' (in that order).

    When multiple digest algorithms are specified, they are applied in the order specified.

    Example:

    venafiCodeSignWithSignTool ..., signatureDigestAlgos: [
        [algorithm: 'sha1'],
        [algorithm: 'sha256']
    ]
  • appendSignatures (boolean): If the target file(s) already have signatures, then append a new signature instead of overwriting the existing signatures. Defaults to false.

  • extraArgs: Specify extra custom CLI arguments to pass to Signtool.

    These arguments will be appended to the Signtool CLI invocation. If they overlap with any arguments implicitly passed by this plugin, then Signtool will raise an error.

    Example:

    venafiCodeSignWithSignTool ..., extraArgs: [
        [argument: '/arg1'],
        [argument: '/arg2']
    ]
  • signToolPath: The full path to signtool.exe. If not specified, we assume that it's in PATH.

  • venafiClientToolsDir: Specifies the path to the directory in which Venafi CodeSign Protect client tools are installed. If not specified, it's autodetected from the registry. If that fails, we fallback to C:\Program Files\Venafi CodeSign Protect.

  • useMachineConfiguration (boolean): Whether to load CSP configuration from the machine registry hive instead of the user registry hive. Defaults to false.

Verify with Signtool (venafiVerifyWithSignTool)

Verifies one or more files with Microsoft's Signtool tool.

Important notes and caveats:

  • This function will automatically synchronize all certificates in the TPP with the local Windows certificate store.

    However, the first time this synchronization happens, Windows will pop up an interactive confirmation dialog. This means a human has to manually click on OK, before verification can proceed.

    If this is problematic, then there are two ways to solve this issue:

    • Ensure that the root certificate of the certificate that was used to sign the target file, is pre-installed.
    • In Aperture (the TPP web admin panel), configure the relevant TPP project, and disable the "Include Certificate Chain" option.
  • It assumes that signtool.exe is in PATH, unless you explicitly specify its path with signToolPath.

Example pipeline usage

venafiVerifyWithSignTool tppName: 'Main Demo Server',
    fileOrGlob: 'foo.exe',
    credential: [credentialsId: '669b87ac-48f2-47db-900e-5255bd08493a']

Required pipeline parameters

  • tppName: The Venafi TLS Protect Datacenter (formerly known as TPP) that contains the certificate that the signed file(s) were signed by.
  • fileOrGlob: A path or a glob that specifies the file(s) to be verified.
  • credential: An array that contains the credentialsId of the stored credential to use. This can be either stored at System or Folder level.

Optional pipeline parameters

  • signToolPath: The full path to signtool.exe. If not specified, we assume that it's in PATH.
  • venafiClientToolsDir: Specifies the path to the directory in which Venafi CodeSign Protect client tools are installed. If not specified, it's autodetected from the registry. If that fails, we fallback to C:\Program Files\Venafi CodeSign Protect.
  • useMachineConfiguration (boolean): Whether to load CSP configuration from the machine registry hive instead of the user registry hive. Defaults to false.