RapidCAM 2.7.1

What's Changed

• Suggest toolpaths for drawn shapes (mill) by @jennib in jennib/rapidcam#456
• Release 2.7.1: Suggest Toolpaths and lettering V-carve by @jennib in jennib/rapidcam#457

Full Changelog: jennib/rapidcam@v2.7.0...v2.7.1

RapidCAM 2.7.0

What's Changed

• Pre-flight shows where the problem is: shapes lit, toolpath named by @jennib in jennib/rapidcam#438
• Plain words on the welcome screen; ⌘ on a Mac by @jennib in jennib/rapidcam#439
• Restore Unsaved Draft no longer restores a blank document after a reload by @jennib in jennib/rapidcam#442
• Name the toolpath on over-deep and fast-plunge; laser pre-flight lights shapes by @jennib in jennib/rapidcam#441
• Update http-cache-semantics to 4.3.0 (Dependabot high alert) by @jennib in jennib/rapidcam#440
• Tell a narrow desktop window its width, not to open RapidCAM on a computer by @jennib in jennib/rapidcam#443
• Pause at manual tool changes by default (M0), with a Machine Settings switch by @jennib in jennib/rapidcam#444
• First-run UX: picking, plain labels, and an Import row by @jennib in jennib/rapidcam#445
• Shorter status-bar hint for Select; width gate to 900 px by @jennib in jennib/rapidcam#446
• Group related tools into flyouts on the palette by @jennib in jennib/rapidcam#447
• Keep the Add Toolpath dialog off the tool palette by @jennib in jennib/rapidcam#448
• Design review of the main layout: first steps and stock by @jennib in jennib/rapidcam#449
• Corner reads Sharp at radius zero; e2e runs by hand in CI by @jennib in jennib/rapidcam#450
• Start prompt leaves once a drawing tool is picked by @jennib in jennib/rapidcam#451
• Dim the disabled action labels to a grey that still clears AA by @jennib in jennib/rapidcam#452
• German (de) locale, and toolpath dialog layout fixes by @jennib in jennib/rapidcam#453
• Add a safety notice and disclaimer, agreed on first launch by @jennib in jennib/rapidcam#454
• Release 2.7.0 by @jennib in jennib/rapidcam#455

Full Changelog: jennib/rapidcam@v2.6.0...v2.7.0

RapidCAM 2.6.0

What's Changed

• Add round-bar center finder examples (mill + laser); fix stale preview for region-named ops by @jennib in jennib/rapidcam#425
• Fix three sketching quirks found drawing a Reuleaux triangle by @jennib in jennib/rapidcam#426
• Add the rcamhub link to the start page by @jennib in jennib/rapidcam#427
• Language button: show the language's full name (English, Español, …) by @jennib in jennib/rapidcam#428
• Save to rcamhub: write a new version of your own design instead of a copy by @jennib in jennib/rapidcam#429
• Start screen: your rcamhub designs, as a tab beside Recent by @jennib in jennib/rapidcam#430
• Start screen: let the rcamhub sign-in row wrap instead of ending in an ellipsis by @jennib in jennib/rapidcam#431
• Keep a design's rcamhub link across a reload, and stop a restored draft inheriting the wrong one by @jennib in jennib/rapidcam#432
• Save to rcamhub: do not guess a version the hub did not record by @jennib in jennib/rapidcam#433
• Say why "+ From Selection" added nothing; stop reporting the ResizeObserver notice as an error by @jennib in jennib/rapidcam#434
• Make the first ten minutes easier: banner off the buttons, rotary lap warning, holes named as holes, 28 plain-language tips by @jennib in jennib/rapidcam#436
• Release 2.6.0 by @jennib in jennib/rapidcam#437

Full Changelog: jennib/rapidcam@v2.5.0...v2.6.0

RapidCAM 2.5.0

What's Changed

• Declare Simplified Chinese as zh-Hans-CN in the Store package by @jennib in jennib/rapidcam#421
• Add Spanish (es): reviewed and completed, with its Store listing by @jennib in jennib/rapidcam#422
• Bump proxy-addr to 2.0.8 (Dependabot critical; lockfile only) by @jennib in jennib/rapidcam#423
• Release 2.5.0 by @jennib in jennib/rapidcam#424

Full Changelog: jennib/rapidcam@v2.4.1...v2.5.0

RapidCAM 2.4.1

What's Changed

• Launch kit: add the two-sided guide by @jennib in jennib/rapidcam#417
• Say so when spoilboard surfacing has no bed size; call a facing pass Facing by @jennib in jennib/rapidcam#418
• Declare French and Simplified Chinese in the Store package, with the listing text by @jennib in jennib/rapidcam#419
• Release 2.4.1 by @jennib in jennib/rapidcam#420

Full Changelog: jennib/rapidcam@v2.4.0...v2.4.1

RapidCAM 2.4.0

What's Changed

• Make New Project's origin pickers readable by @jennib in jennib/rapidcam#407
• Say so when rcamhub sign-in cannot work from this address by @jennib in jennib/rapidcam#408
• Warn when a pocket clears a shape drawn inside another picked outline by @jennib in jennib/rapidcam#409
• Refuse a circular pattern whose centre is a selected circle's own centre by @jennib in jennib/rapidcam#410
• Warn when a Drill hole will not be the size that was drawn by @jennib in jennib/rapidcam#411
• Release 2.4.0 by @jennib in jennib/rapidcam#412
• Launch kit: point at the eight guides, and fix a claim that was not true by @jennib in jennib/rapidcam#413
• Warn when a flip registration pin would be bored into the part by @jennib in jennib/rapidcam#414
• Fold the flip pin fix into 2.4.0 (not tagged yet) by @jennib in jennib/rapidcam#415
• Fix the Two-sided setup dialog's pin fields running together by @jennib in jennib/rapidcam#416

Full Changelog: jennib/rapidcam@v2.3.0...v2.4.0

RapidCAM 2.3.0

What's Changed

• Review leftovers: lint scope, , collapsed-folder pin (#388, #389, #381) by @jennib in jennib/rapidcam#393
• Serial: a [MSG:ERR line is an explanation, not a reply (#380) by @jennib in https://github.com/jennib/rapidcam/pull/395
• Run-time estimate learns how the machine moves (optional machine speeds) by @jennib in jennib/rapidcam#396
• Opt-in clamp clearance: raise a toolpath's retract so its rapids clear a clamp by @jennib in jennib/rapidcam#397
• Keep vitest out of .claude/worktrees by @jennib in jennib/rapidcam#398
• Relief toolpath cards say their time is a rough figure by @jennib in jennib/rapidcam#399
• First five minutes: drop a file to open it, a usable phone landing, a hint on an empty drawing by @jennib in jennib/rapidcam#401
• Say so when a program's tool change is only the app's default by @jennib in jennib/rapidcam#402
• Make the Parametric Box example's cut follow the material thickness by @jennib in jennib/rapidcam#403
• Keep the collapsed Tool line in step with the operation type by @jennib in jennib/rapidcam#404
• Size a dropped picture from the stock, not the sheet around it by @jennib in jennib/rapidcam#405
• Release 2.3.0 by @jennib in jennib/rapidcam#406

Full Changelog: jennib/rapidcam@v2.2.0...v2.3.0

RapidCAM 2.2.0

What's Changed

• Serial: STOP ends the job at once; design tree: Shift-click on a group selects it whole by @jennib in jennib/rapidcam#370
• Review follow-ups: serial hold, selection fixes, live MCP and shell guards by @jennib in jennib/rapidcam#387
• Fix a flaky e2e control from #387 that failed on CI by @jennib in jennib/rapidcam#392
• CI policy (#383): everything through a PR, plus a pre-push lint and type check by @jennib in jennib/rapidcam#390
• Release 2.2.0: move the Unreleased fixes into the 2.2.0 changelog by @jennib in jennib/rapidcam#391

Full Changelog: jennib/rapidcam@v2.1.2...v2.2.0

RapidCAM 2.1.2

Full Changelog: jennib/rapidcam@v2.1.1...v2.1.2

RapidCAM 2.0.0

What's Changed

• A dragged feature snapped back to where it was inserted by @jennib in jennib/rapidcam#309
• Changelog: record the dragged-feature fix while it is one entry by @jennib in jennib/rapidcam#310
• The tool palette rendered at 65% of its specified size, and half the icons were emoji by @jennib in jennib/rapidcam#311
• The Toolpaths panel's flat hierarchy, and an interface size setting by @jennib in jennib/rapidcam#313
• The canvas has a colour language; the chrome had one blue by @jennib in jennib/rapidcam#314
• Icons that drew the wrong thing, and a canvas that never drew the cut by @jennib in jennib/rapidcam#315
• The relief card, the toolpath palette, four icons, and the examples gallery by @jennib in jennib/rapidcam#316
• A malformed .rcam wedged the open path, and dropped geometry said nothing by @jennib in jennib/rapidcam#317
• Prefer const for a test index that is never reassigned by @jennib in jennib/rapidcam#318
• Pen tool Shift/Alt gestures; curves learn Join and Explode by @jennib in jennib/rapidcam#319
• A Reverse command flips a path's direction by @jennib in jennib/rapidcam#320
• Symmetric curve nodes hold both handles at equal length by @jennib in jennib/rapidcam#321
• A View-menu toggle shows and hides the toolpath preview on the canvas by @jennib in jennib/rapidcam#322
• Document the View-menu toolpath-preview toggle by @jennib in jennib/rapidcam#323
• Draw a bit-sized hole marker for drill toolpaths on the 2-D canvas by @jennib in jennib/rapidcam#324
• Complete CAM toolpath visualization: Inlay, Flip, Relief, Rotary, and Chevrons by @jennib in jennib/rapidcam#325
• Close the last contour of a text entity on screen by @jennib in jennib/rapidcam#326
• Give the rcamhub link rcamhub's own logo and a chrome pill by @jennib in jennib/rapidcam#327
• Call the preview toggle one name, so a laser job has a 3D preview to find by @jennib in jennib/rapidcam#328
• Cap a variable's name and expr in the .rcam schema by @jennib in jennib/rapidcam#329
• Cap every expression field, not just a variable's by @jennib in jennib/rapidcam#330
• Bound the param maps by key length and count by @jennib in jennib/rapidcam#331
• Bound each keyIds entry, and not how many there are by @jennib in jennib/rapidcam#332
• Add the desktop app, and sign in to rcamhub with a token by @jennib in jennib/rapidcam#333
• Serve the desktop app from app://rapidcam, and add a release workflow by @jennib in jennib/rapidcam#334
• Call it RapidCAM again, and move the app to rapidcam.app by @jennib in jennib/rapidcam#335
• Release 2.0.0, with RapidCAM installer artwork by @jennib in jennib/rapidcam#336
• Privacy policy page, and the Microsoft Store build by @jennib in jennib/rapidcam#337
• Ad-hoc sign the Mac builds, so macOS offers Open Anyway by @jennib in jennib/rapidcam#338

Full Changelog: jennib/rapidcam@v1.12.0...v2.0.0