Permalink
Fetching contributors…
Cannot retrieve contributors at this time
321 lines (219 sloc) 12.5 KB

KEVM: Semantics of EVM in K

In this repository we provide a model of the EVM in K.

Documentation/Support

These may be useful for learning KEVM and K (newest to oldest):

To get support for KEVM, please join our Riot Room.

Installing/Building

K Backends

There are three backends of K available, the OCAML backend for concrete execution, the Java backend for symbolic reasoning and proofs, and the experimental Haskell backend for developers. This repository generates the build-products for both backends in .build/java/ and .build/ocaml/.

There is also a Haskell version of K currently under development which is meant to eventually replace the Java backend for symbolic reasoning and proofs. To read more about building and using it, please check the K Haskell Backend

System Dependencies

The following are needed for building/running KEVM:

  • git
  • Pandoc >= 1.17 is used to generate the *.k files from the *.md files.
  • GNU Bison, Flex, and Autoconf.
  • GNU libmpfr and libtool.
  • Java 8 JDK (eg. OpenJDK)
  • Opam, important: Ubuntu users prior to 15.04 must build from source, as the Ubuntu install for 14.10 and prior is broken. opam repository also requires rsync.

On Ubuntu >= 15.04 (for example):

sudo apt-get install make gcc maven openjdk-8-jdk flex opam pkg-config libmpfr-dev autoconf libtool pandoc zlib1g-dev

To run proofs, you will also need Z3 prover; on Ubuntu:

sudo apt-get install z3 libz3-dev

On ArchLinux:

sudo pacman -S  base-devel rsync opam pandoc jre8-openjdk mpfr maven z3

On OSX, using Homebrew, after installing the command line tools package:

brew tap caskroom/cask caskroom/version
brew cask install java8
brew install automake libtool gmp mpfr pkg-config pandoc maven opam z3

NOTE: a previous version of these instructions required the user to run brew link flex --force. After fetching this revision, you should first run brew unlink flex, as it is no longer necessary and will cause an error if you have the homebrew version of flex installed instead of the xcode command line tools version.

Building

After installing the above dependencies, the following command will build submodule dependencies and then KEVM:

make deps
make

OPTIONAL: K Haskell Backend

The K Haskell Backend, currently under development, is meant to eventually replace the Java backend for symbolic reasoning and proofs.

System Dependencies

In addition to the above dependencies, the Haskell Backend also depends on:

  • Haskell Stack. Note that the version of the stack tool provided by your package manager might not be recent enough. Please follow installation instructions from the Haskell Stack website linked above.

To run proofs, you will also need Z3 version 4.7.1 or higher.

On Ubuntu:

sudo apt-get install haskell-stack z3 libz3-dev

To upgrade stack (if needed):

stack upgrade
export PATH=$HOME/.local/bin:$PATH

Building

After installing the above dependencies, the following command will build the Kore backend submodule dependency and then the Kore version of KEVM:

make haskell-deps
make build-haskell

This Repository

The following files constitute the KEVM semantics:

  • krypto.md sets up some basic cryptographic primitives.
  • data.md provides the (functional) data of EVM (256 bit words, wordstacks, etc...).
  • evm.md is the main KEVM semantics, containing the configuration and transition rules of EVM.

These additional files extend the semantics to make the repository more useful:

  • driver.md is an execution harness for KEVM, providing a simple language for describing tests/programs.
  • analysis.md contains any automated analysis tools we develop.
  • edsl.md defines high-level notations of eDSL, a domain-specific language for EVM specifications, for formal verification of EVM bytecode using K Reachability Logic Prover.

Example Usage

After building the definition, you can run the definition using ./kevm. Read the ./kevm script for examples of the actual invocations of krun that ./kevm makes.

Run the file tests/ethereum-tests/VMTests/vmArithmeticTest/add0.json:

./kevm run tests/ethereum-tests/VMTests/vmArithmeticTest/add0.json

Run the same file as a test:

./kevm test tests/ethereum-tests/VMTests/vmArithmeticTest/add0.json

To run proofs, you can similarly use ./kevm. For example, to prove the specification tests/proofs/specs/vyper-erc20/totalSupply-spec.k:

./kevm prove tests/proofs/specs/vyper-erc20/totalSupply-spec.k

Finally, if you want to debug a given program (by stepping through its execution), you can use the debug option:

./kevm debug tests/ethereum-tests/VMTests/vmArithmeticTest/add0.json
...
KDebug> s
1 Step(s) Taken.
KDebug> p
... Big Configuration Here ...
KDebug>

Running Tests

The tests are run using the supplied Makefile. First, run make split-tests to generate some of the tests from the markdown files.

The following subsume all other tests:

  • make test: All of the quick tests.
  • make test-all: All of the quick and slow tests.

These are the individual test-suites (all of these can be suffixed with -all to also run slow tests):

Media

This repository can build two pieces of documentation for you, the Jello Paper and the 2017 Devcon3 presentation.

System Dependencies

If you also want to build the Jello Paper, you'll additionally need:

sudo apt-get install python-pygments python-sphinx python-recommonmark
git clone 'https://github.com/kframework/k-editor-support'
cd k-editor-support/pygments
easy_install --user .

For the 2017 Devcon3 presentation, you'll need pdflatex, commonly provided with texlive-full.

sudo apt-get install texlive-full

Building

The Makefile supplies targets for building:

  • All media in this list: make media
  • Jello Paper documentation: make sphinx
  • 2017 Devcon3 presentation: make 2017-devcon3

Contributing

Any pull requests into this repository will not be reviewed until at least some conditions are met. Here we'll accumulate the standards that this repository is held to.

Code style guidelines, while somewhat subjective, will still be inspected before going to review. In general, read the rest of the definition for examples about how to style new K code; we collect a few common flubs here.

Writing tests and more contract proofs is always appreciated. Tests can come in the form of proofs done over contracts too :).

Hard - Every Commit

These are hard requirements (must be met before review), and they must be true for every commit in the PR.

  • If a new feature is introduced in the PR, and later a bug is fixed in the new feature, the bug fix must be squashed back into the feature introduction. The only exceptions to this are if you want to document the bug because it was quite tricky or is something you believe should be fixed about K. In these exceptional cases, place the bug-fix commit directly after the feature introduction commit and leave useful commit messages. In addition, mark the feature introduction commit with [skip-ci] if tests will fail on that commit so that we know not to waste time testing it.

  • No tab characters, 4 spaces instead. Linux-style line endings; if you're on a Windows machine make sure to run dos2unix on the files. No whitespace at the end of any lines.

Hard - PR Tip

These are hard requirements (must be met before review), but they only have to be true for the tip of the PR before review.

  • Every test in the repository must pass. We will test this with make split-tests ; make test -j12.

Soft - Every Commit

These are soft requirements (review may start without these being met), and they will be considered for every commit in the PR.

  • Comments do not live in the K code blocks, but rather in the surrounding Markdown (unless there is a really good reason to localize the comment).

  • You should consider prefixing "internal" symbols (symbols that a user would not write in a program) with a hash (#).

  • Place a line of - after each block of syntax declarations.

        syntax Foo ::= "newSymbol"
     // --------------------------
        rule <k> newSymbol => . ... </k>
    

    Notice that if there are rules immediately following the syntax declaration, a commented-out line of - is inserted afterward. Notice that the width of the line of - matches that of the preceding line.

  • Place spaces around parentheses and commas in K's pretty functional-style syntax declarations.

        syntax Foo ::= newFunctionalSyntax ( Int , String )
     // ---------------------------------------------------
    
  • When multiple structurally-similar rules are present, line up as much as possible (and makes sense).

        rule <k> #do1       => . ... </k> <cell1> not-done => done        </cell1>
        rule <k> #do1Longer => . ... </k> <cell1> not-done => done-longer </cell1>
    
        rule <k> #do2     => . ... </k> <cell2> not-done => done2 </cell2>
        rule <k> #doShort => . ... </k> <cell2> nd       => done2 </cell2>
    

    This makes it simpler to make changes to entire groups of rules at a time using sufficiently modern editors. Notice that if we break alignment (eg. from the #do1 group above to the #do2 group), we put an extra line between the groups of rules.

  • Line up the r in requires with the l in rule (if it's not all on one line). Similarly, line up the end of andBool for extra side-conditions with the end of requires.

        rule <k> A => B ... </k>
             SOME_LARGE_CONFIGURATION
    
          requires A > 3
           andBool isPrime(A)
    

Resources

For more information about The K Framework, refer to these sources: