MQTT.js is a client library for the MQTT protocol, written in JavaScript for node.js and the browser.

• Upgrade notes
• Installation
• Example
• Command Line Tools
• API
• Browser
• Weapp
• About QoS
• TypeScript
• Contributing
• License

MQTT.js is an OPEN Open Source Project, see the Contributing section to find out what this means.

Important notes for existing users

v4.0.0 (Released 04/2020) removes support for all end of life node versions, and now supports node v12 and v14. It also adds improvements to debug logging, along with some feature additions.

As a breaking change, by default a error handler is built into the MQTT.js client, so if any errors are emitted and the user has not created an event handler on the client for errors, the client will not break as a result of unhandled errors. Additionally, typical TLS errors like ECONNREFUSED, ECONNRESET have been added to a list of TLS errors that will be emitted from the MQTT.js client, and so can be handled as connection errors.

v3.0.0 adds support for MQTT 5, support for node v10.x, and many fixes to improve reliability.

Note: MQTT v5 support is experimental as it has not been implemented by brokers yet.

v2.0.0 removes support for node v0.8, v0.10 and v0.12, and it is 3x faster in sending packets. It also removes all the deprecated functionality in v1.0.0, mainly mqtt.createConnection and mqtt.Server. From v2.0.0, subscriptions are restored upon reconnection if clean: true. v1.x.x is now in LTS, and it will keep being supported as long as there are v0.8, v0.10 and v0.12 users.

As a breaking change, the encoding option in the old client is removed, and now everything is UTF-8 with the exception of the password in the CONNECT message and payload in the PUBLISH message, which are Buffer.

Another breaking change is that MQTT.js now defaults to MQTT v3.1.1, so to support old brokers, please read the client options doc.

v1.0.0 improves the overall architecture of the project, which is now split into three components: MQTT.js keeps the Client, mqtt-connection includes the barebone Connection code for server-side usage, and mqtt-packet includes the protocol parser and generator. The new Client improves performance by a 30% factor, embeds Websocket support (MOWS is now deprecated), and it has a better support for QoS 1 and 2. The previous API is still supported but deprecated, as such, it is not documented in this README.

Installation

npm install mqtt --save

Example

For the sake of simplicity, let's put the subscriber and the publisher in the same file:

var mqtt = require('mqtt')
var client  = mqtt.connect('mqtt://test.mosquitto.org')

client.on('connect', function () {
  client.subscribe('presence', function (err) {
    if (!err) {
      client.publish('presence', 'Hello mqtt')
    }
  })
})

client.on('message', function (topic, message) {
  // message is Buffer
  console.log(message.toString())
  client.end()
})

output:

Hello mqtt

If you want to run your own MQTT broker, you can use Mosquitto or Mosca, and launch it. You can also use a test instance: test.mosquitto.org and test.mosca.io are both public.

If you do not want to install a separate broker, you can try using the mqtt-connection.

to use MQTT.js in the browser see the browserify section

Promise support

If you want to use the new async-await functionality in JavaScript, or just prefer using Promises instead of callbacks, async-mqtt is a wrapper over MQTT.js which uses promises instead of callbacks when possible.

Command Line Tools

MQTT.js bundles a command to interact with a broker. In order to have it available on your path, you should install MQTT.js globally:

npm install mqtt -g

Then, on one terminal

mqtt sub -t 'hello' -h 'test.mosquitto.org' -v

On another

mqtt pub -t 'hello' -h 'test.mosquitto.org' -m 'from MQTT.js'

See mqtt help <command> for the command help.

Debug Logs

MQTT.js uses the debug package for debugging purposes. To enable debug logs, add the following environment variable on runtime :

# (example using PowerShell, the VS Code default)
$env:DEBUG='mqttjs*'

About Reconnection

An important part of any websocket connection is what to do when a connection drops off and the client needs to reconnect. MQTT has built-in reconnection support that can be configured to behave in ways that suit the application.

Refresh Authentication Options / Signed Urls with transformWsUrl (Websocket Only)

When an mqtt connection drops and needs to reconnect, it's common to require that any authentication associated with the connection is kept current with the underlying auth mechanism. For instance some applications may pass an auth token with connection options on the initial connection, while other cloud services may require a url be signed with each connection.

By the time the reconnect happens in the application lifecycle, the original auth data may have expired.

To address this we can use a hook called transformWsUrl to manipulate either of the connection url or the client options at the time of a reconnect.

Example (update clientId & username on each reconnect):

    const transformWsUrl = (url, options, client) => {
      client.options.username = `token=${this.get_current_auth_token()}`;
      client.options.clientId = `${this.get_updated_clientId()}`;

      return `${this.get_signed_cloud_url(url)`;
    }

    const connection = await mqtt.connectAsync(<wss url>, {
      ...,
      transformWsUrl: transformUrl,
    });

Now every time a new WebSocket connection is opened (hopefully not too often), we will get a fresh signed url or fresh auth token data.

Note: Currently this hook does not support promises, meaning that in order to use the latest auth token, you must have some outside mechanism running that handles application-level authentication refreshing so that the websocket connection can simply grab the latest valid token or signed url.

Enabling Reconnection with reconnectPeriod option

To ensure that the mqtt client automatically tries to reconnect when the connection is dropped, you must set the client option reconnectPeriod to a value greater than 0. A value of 0 will disable reconnection and then terminate the final connection when it drops.

The default value is 1000 ms which means it will try to reconnect 1 second after losing the connection.

API

• mqtt.connect()
• mqtt.Client()
• mqtt.Client#publish()
• mqtt.Client#subscribe()
• mqtt.Client#unsubscribe()
• mqtt.Client#end()
• mqtt.Client#removeOutgoingMessage()
• mqtt.Client#reconnect()
• mqtt.Client#handleMessage()
• mqtt.Client#connected
• mqtt.Client#reconnecting
• mqtt.Client#getLastMessageId()
• mqtt.Store()
• mqtt.Store#put()
• mqtt.Store#del()
• mqtt.Store#createStream()
• mqtt.Store#close()

---

mqtt.connect([url], options)

Connects to the broker specified by the given url and options and returns a Client.

The URL can be on the following protocols: 'mqtt', 'mqtts', 'tcp', 'tls', 'ws', 'wss'. The URL can also be an object as returned by URL.parse(), in that case the two objects are merged, i.e. you can pass a single object with both the URL and the connect options.

You can also specify a servers options with content: [{ host: 'localhost', port: 1883 }, ... ], in that case that array is iterated at every connect.

For all MQTT-related options, see the Client constructor.

---

mqtt.Client(streamBuilder, options)

The Client class wraps a client connection to an MQTT broker over an arbitrary transport method (TCP, TLS, WebSocket, ecc).

Client automatically handles the following:

• Regular server pings
• QoS flow
• Automatic reconnections
• Start publishing before being connected

The arguments are:

• streamBuilder is a function that returns a subclass of the Stream class that supports the connect event. Typically a net.Socket.
• options is the client connection options (see: the connect packet). Defaults:
  • wsOptions: is the WebSocket connection options. Default is {}. It's specific for WebSockets. For possible options have a look at: https://github.com/websockets/ws/blob/master/doc/ws.md.
  • keepalive: 60 seconds, set to 0 to disable
  • reschedulePings: reschedule ping messages after sending packets (default true)
  • clientId: 'mqttjs_' + Math.random().toString(16).substr(2, 8)
  • protocolId: 'MQTT'
  • protocolVersion: 4
  • clean: true, set to false to receive QoS 1 and 2 messages while offline
  • reconnectPeriod: 1000 milliseconds, interval between two reconnections. Disable auto reconnect by setting to 0.
  • connectTimeout: 30 * 1000 milliseconds, time to wait before a CONNACK is received
  • username: the username required by your broker, if any
  • password: the password required by your broker, if any
  • incomingStore: a Store for the incoming packets
  • outgoingStore: a Store for the outgoing packets
  • queueQoSZero: if connection is broken, queue outgoing QoS zero messages (default true)
  • customHandleAcks: MQTT 5 feature of custom handling puback and pubrec packets. Its callback:

      customHandleAcks: function(topic, message, packet, done) {/*some logic wit colling done(error, reasonCode)*/}

  • properties: properties MQTT 5.0. object that supports the following properties:
    • sessionExpiryInterval: representing the Session Expiry Interval in seconds number,
    • receiveMaximum: representing the Receive Maximum value number,
    • maximumPacketSize: representing the Maximum Packet Size the Client is willing to accept number,
    • topicAliasMaximum: representing the Topic Alias Maximum value indicates the highest value that the Client will accept as a Topic Alias sent by the Server number,
    • requestResponseInformation: The Client uses this value to request the Server to return Response Information in the CONNACK boolean,
    • requestProblemInformation: The Client uses this value to indicate whether the Reason String or User Properties are sent in the case of failures boolean,
    • userProperties: The User Property is allowed to appear multiple times to represent multiple name, value pairs object,
    • authenticationMethod: the name of the authentication method used for extended authentication string,
    • authenticationData: Binary Data containing authentication data binary
  • authPacket: settings for auth packet object
  • will: a message that will sent by the broker automatically when the client disconnect badly. The format is:
    • topic: the topic to publish
    • payload: the message to publish
    • qos: the QoS
    • retain: the retain flag
    • properties: properties of will by MQTT 5.0:
      • willDelayInterval: representing the Will Delay Interval in seconds number,
      • payloadFormatIndicator: Will Message is UTF-8 Encoded Character Data or not boolean,
      • messageExpiryInterval: value is the lifetime of the Will Message in seconds and is sent as the Publication Expiry Interval when the Server publishes the Will Message number,
      • contentType: describing the content of the Will Message string,
      • responseTopic: String which is used as the Topic Name for a response message string,
      • correlationData: The Correlation Data is used by the sender of the Request Message to identify which request the Response Message is for when it is received binary,
      • userProperties: The User Property is allowed to appear multiple times to represent multiple name, value pairs object
  • transformWsUrl : optional (url, options, client) => url function For ws/wss protocols only. Can be used to implement signing urls which upon reconnect can have become expired.
  • resubscribe : if connection is broken and reconnects, subscribed topics are automatically subscribed again (default true)

In case mqtts (mqtt over tls) is required, the options object is passed through to tls.connect(). If you are using a self-signed certificate, pass the rejectUnauthorized: false option. Beware that you are exposing yourself to man in the middle attacks, so it is a configuration that is not recommended for production environments.

If you are connecting to a broker that supports only MQTT 3.1 (not 3.1.1 compliant), you should pass these additional options:

{
  protocolId: 'MQIsdp',
  protocolVersion: 3
}

This is confirmed on RabbitMQ 3.2.4, and on Mosquitto < 1.3. Mosquitto version 1.3 and 1.4 works fine without those.

Event 'connect'

function (connack) {}

Emitted on successful (re)connection (i.e. connack rc=0).

• connack received connack packet. When clean connection option is false and server has a previous session for clientId connection option, then connack.sessionPresent flag is true. When that is the case, you may rely on stored session and prefer not to send subscribe commands for the client.

Event 'reconnect'

function () {}

Emitted when a reconnect starts.

Event 'close'

function () {}

Emitted after a disconnection.

Event 'disconnect'

function (packet) {}

Emitted after receiving disconnect packet from broker. MQTT 5.0 feature.

Event 'offline'

function () {}

Emitted when the client goes offline.

Event 'error'

function (error) {}

Emitted when the client cannot connect (i.e. connack rc != 0) or when a parsing error occurs.

The following TLS errors will be emitted as an error event:

• ECONNREFUSED
• ECONNRESET
• EADDRINUSE
• ENOTFOUND

Event 'end'

function () {}

Emitted when mqtt.Client#end() is called. If a callback was passed to mqtt.Client#end(), this event is emitted once the callback returns.

Event 'message'

function (topic, message, packet) {}

Emitted when the client receives a publish packet

• topic topic of the received packet
• message payload of the received packet
• packet received packet, as defined in mqtt-packet

Event 'packetsend'

function (packet) {}

Emitted when the client sends any packet. This includes .published() packets as well as packets used by MQTT for managing subscriptions and connections

• packet received packet, as defined in mqtt-packet

Event 'packetreceive'

function (packet) {}

Emitted when the client receives any packet. This includes packets from subscribed topics as well as packets used by MQTT for managing subscriptions and connections

• packet received packet, as defined in mqtt-packet

---

mqtt.Client#publish(topic, message, [options], [callback])

Publish a message to a topic

• topic is the topic to publish to, String
• message is the message to publish, Buffer or String
• options is the options to publish with, including:
  • qos QoS level, Number, default 0
  • retain retain flag, Boolean, default false
  • dup mark as duplicate flag, Boolean, default false
  • properties: MQTT 5.0 properties object
    • payloadFormatIndicator: Payload is UTF-8 Encoded Character Data or not boolean,
    • messageExpiryInterval: the lifetime of the Application Message in seconds number,
    • topicAlias: value that is used to identify the Topic instead of using the Topic Name number,
    • responseTopic: String which is used as the Topic Name for a response message string,
    • correlationData: used by the sender of the Request Message to identify which request the Response Message is for when it is received binary,
    • userProperties: The User Property is allowed to appear multiple times to represent multiple name, value pairs object,
    • subscriptionIdentifier: representing the identifier of the subscription number,
    • contentType: String describing the content of the Application Message string
  • cbStorePut - function (), fired when message is put into outgoingStore if QoS is 1 or 2.
• callback - function (err), fired when the QoS handling completes, or at the next tick if QoS 0. An error occurs if client is disconnecting.

---

mqtt.Client#subscribe(topic/topic array/topic object, [options], [callback])

Subscribe to a topic or topics

• topic is a String topic to subscribe to or an Array of topics to subscribe to. It can also be an object, it has as object keys the topic name and as value the QoS, like {'test1': {qos: 0}, 'test2': {qos: 1}}. MQTT topic wildcard characters are supported (+ - for single level and # - for multi level)
• options is the options to subscribe with, including:
  • qos QoS subscription level, default 0
  • nl No Local MQTT 5.0 flag (If the value is true, Application Messages MUST NOT be forwarded to a connection with a ClientID equal to the ClientID of the publishing connection)
  • rap Retain as Published MQTT 5.0 flag (If true, Application Messages forwarded using this subscription keep the RETAIN flag they were published with. If false, Application Messages forwarded using this subscription have the RETAIN flag set to 0.)
  • rh Retain Handling MQTT 5.0 (This option specifies whether retained messages are sent when the subscription is established.)
  • properties: object
    • subscriptionIdentifier: representing the identifier of the subscription number,
    • userProperties: The User Property is allowed to appear multiple times to represent multiple name, value pairs object
• callback - function (err, granted) callback fired on suback where:
  • err a subscription error or an error that occurs when client is disconnecting
  • granted is an array of {topic, qos} where:
    • topic is a subscribed to topic
    • qos is the granted QoS level on it

---

mqtt.Client#unsubscribe(topic/topic array, [options], [callback])

Unsubscribe from a topic or topics

• topic is a String topic or an array of topics to unsubscribe from
• options: options of unsubscribe.
  • properties: object
    • userProperties: The User Property is allowed to appear multiple times to represent multiple name, value pairs object
• callback - function (err), fired on unsuback. An error occurs if client is disconnecting.

---

mqtt.Client#end([force], [options], [cb])

Close the client, accepts the following options:

• force: passing it to true will close the client right away, without waiting for the in-flight messages to be acked. This parameter is optional.
• options: options of disconnect.
  • reasonCode: Disconnect Reason Code number
  • properties: object
    • sessionExpiryInterval: representing the Session Expiry Interval in seconds number,
    • reasonString: representing the reason for the disconnect string,
    • userProperties: The User Property is allowed to appear multiple times to represent multiple name, value pairs object,
    • serverReference: String which can be used by the Client to identify another Server to use string
• cb: will be called when the client is closed. This parameter is optional.

---

mqtt.Client#removeOutgoingMessage(mid)

Remove a message from the outgoingStore. The outgoing callback will be called with Error('Message removed') if the message is removed.

After this function is called, the messageId is released and becomes reusable.

• mid: The messageId of the message in the outgoingStore.

---

mqtt.Client#reconnect()

Connect again using the same options as connect()

---

mqtt.Client#handleMessage(packet, callback)

Handle messages with backpressure support, one at a time. Override at will, but always call callback, or the client will hang.

---

mqtt.Client#connected

Boolean : set to true if the client is connected. false otherwise.

---

mqtt.Client#getLastMessageId()

Number : get last message id. This is for sent messages only.

---

mqtt.Client#reconnecting

Boolean : set to true if the client is trying to reconnect to the server. false otherwise.

---

mqtt.Store(options)

In-memory implementation of the message store.

• options is the store options:
  • clean: true, clean inflight messages when close is called (default true)

Other implementations of mqtt.Store:

• mqtt-level-store which uses Level-browserify to store the inflight data, making it usable both in Node and the Browser.
• mqtt-nedb-store which uses nedb to store the inflight data.
• mqtt-localforage-store which uses localForage to store the inflight data, making it usable in the Browser without browserify.

---

mqtt.Store#put(packet, callback)

Adds a packet to the store, a packet is anything that has a messageId property. The callback is called when the packet has been stored.

---

mqtt.Store#createStream()

Creates a stream with all the packets in the store.

---

mqtt.Store#del(packet, cb)

Removes a packet from the store, a packet is anything that has a messageId property. The callback is called when the packet has been removed.

---

mqtt.Store#close(cb)

Closes the Store.

Browser

Via CDN

The MQTT.js bundle is available through http://unpkg.com, specifically at https://unpkg.com/mqtt/dist/mqtt.min.js. See http://unpkg.com for the full documentation on version ranges.

WeChat Mini Program

Support WeChat Mini Program. See Doc.

Example(js)

var mqtt = require('mqtt')
var client = mqtt.connect('wxs://test.mosquitto.org')

Example(ts)

import { connect } from 'mqtt';
const client = connect('wxs://test.mosquitto.org');

Ali Mini Program

Surport Ali Mini Program. See Doc.

Example(js)

var mqtt = require('mqtt')
var client = mqtt.connect('alis://test.mosquitto.org')

Example(ts)

import { connect } from 'mqtt';
const client  = connect('alis://test.mosquitto.org');

Browserify

In order to use MQTT.js as a browserify module you can either require it in your browserify bundles or build it as a stand alone module. The exported module is AMD/CommonJs compatible and it will add an object in the global space.

npm install -g browserify // install browserify
cd node_modules/mqtt
npm install . // install dev dependencies
browserify mqtt.js -s mqtt > browserMqtt.js // require mqtt in your client-side app

Webpack

Just like browserify, export MQTT.js as library. The exported module would be var mqtt = xxx and it will add an object in the global space. You could also export module in other formats (AMD/CommonJS/others) by setting output.libraryTarget in webpack configuration.

npm install -g webpack // install webpack

cd node_modules/mqtt
npm install . // install dev dependencies
webpack mqtt.js ./browserMqtt.js --output-library mqtt

you can then use mqtt.js in the browser with the same api than node's one.

<html>
<head>
  <title>test Ws mqtt.js</title>
</head>
<body>
<script src="./browserMqtt.js"></script>
<script>
  var client = mqtt.connect() // you add a ws:// url here
  client.subscribe("mqtt/demo")

  client.on("message", function (topic, payload) {
    alert([topic, payload].join(": "))
    client.end()
  })

  client.publish("mqtt/demo", "hello world!")
</script>
</body>
</html>

Your broker should accept websocket connection (see MQTT over Websockets to setup Mosca).

About QoS

Here is how QoS works:

• QoS 0 : received at most once : The packet is sent, and that's it. There is no validation about whether it has been received.
• QoS 1 : received at least once : The packet is sent and stored as long as the client has not received a confirmation from the server. MQTT ensures that it will be received, but there can be duplicates.
• QoS 2 : received exactly once : Same as QoS 1 but there is no duplicates.

About data consumption, obviously, QoS 2 > QoS 1 > QoS 0, if that's a concern to you.

Usage with TypeScript

This repo bundles TypeScript definition files for use in TypeScript projects and to support tools that can read .d.ts files.

Pre-requisites

Before you can begin using these TypeScript definitions with your project, you need to make sure your project meets a few of these requirements:

• TypeScript >= 2.1
• Set tsconfig.json: {"compilerOptions" : {"moduleResolution" : "node"}, ...}
• Includes the TypeScript definitions for node. You can use npm to install this by typing the following into a terminal window: npm install --save-dev @types/node

Contributing

MQTT.js is an OPEN Open Source Project. This means that:

Individuals making significant and valuable contributions are given commit-access to the project to contribute as they see fit. This project is more like an open wiki than a standard guarded open source project.

See the CONTRIBUTING.md file for more details.

Contributors

MQTT.js is only possible due to the excellent work of the following contributors:

Adam Rudd	GitHub/adamvr	Twitter/@adam_vr
Matteo Collina	GitHub/mcollina	Twitter/@matteocollina
Maxime Agor	GitHub/4rzael	Twitter/@4rzael
Siarhei Buntsevich	GitHub/scarry1992

License

MIT