In 2013, LEGO introduced its third-generation Mindstorms robotics set, the EV3. Unlike its predecessors, the EV3 runs Linux, giving hackers and hobbyists the opportunity to create robots more capable than ever before.
The ev3dev project maintains open source, hacker-friendly releases of EV3's operating system. Distributions include built-in ssh support and custom drivers for EV3's hardware. In fact, a simple file system-based interface can be used to interact with EV3's motors, sensors, buttons, and LEDs. Directories under /sys/class represent various device classes, and setting attributes is as simple as writing to files.
For example, executing the following shell commands will run a motor at 50% speed:
echo 50 > /sys/class/tacho-motor/outA:motor:tacho/speed_setpoint
echo 1 > /sys/class/tacho-motor/outA:motor:tacho/run
This enables third-party developers to write EV3 bindings for any programming language that has a file system IO API.
GoEV3 provides EV3 bindings for Google Go (golang), enabling Mindstorms robot programmers to take advantage of Go's modern syntax and extensive standard library.
First, we need to install ev3dev onto a Micro SD card (by using an SD card, we can keep EV3's built-in software intact). Instructions for the installation process can be found on ev3dev's wiki. When you're done, reboot your EV3 and make sure you can ssh into it from your computer.
Next, we need to install an ARMv5 build of Google Go. Fortunately for us, Go developer Dave Cheney released builds of Go for various ARM architectures. On your computer, download the latest ARMv5 package (1.2 as of this writing). Once the download completes, transfer it to the EV3 over ssh using scp:
scp /path/to/go1.2.linux-arm~armv5-1.tar.gz root@192.168.3.2:~/go.tar.gz
Be sure to replace 192.168.3.2 with your EV3's IP address. Now we can ssh into the EV3 and extract the archive to its final destination:
cd /usr/local
tar -xf ~/go.tar.gz
Extraction may take a few minutes. Once it's done, we'll add Go's bin directory to our shell's path:
echo "export PATH=\$PATH:/usr/local/go/bin" >> ~/.bashrc
source ~/.bashrc
We should now be able to invoke the go tool like so:
root@ev3dev:~# go version
go version go1.2 linux/arm
Now that we have Google Go up and running, we need to install GoEV3. First, let's set up our Go workspace:
cd ~
mkdir gocode
echo "export GOPATH=\$HOME/gocode" >> ~/.bashrc
source ~/.bashrc
We can obtain GoEV3 from its GitHub repository. Be sure to have internet connection sharing enabled prior to running the following commands:
mkdir -p gocode/src/github.com/mattrajca
cd gocode/src/github.com/mattrajca
wget -O GoEV3.tar.gz --no-check-certificate https://github.com/mattrajca/GoEV3/archive/master.tar.gz
tar -xf GoEV3.tar.gz
mv GoEV3-master GoEV3
rm GoEV3.tar.gz
cd ~
Note we're not using go get to avoid installing git on the EV3.
GoEV3 comes with a sample program that lets us exercise EV3's various hardware capabilities. We can now run it with the following commands:
go install github.com/mattrajca/GoEV3
gocode/bin/GoEV3
Choose mode 6. Motors, plug in a motor to output port A, and watch it turn! Feel free to explore the other modes.
We'll now write a short Go program that drives a robot forward as long as there are no obstacles. To do this, we'll take advantage of the Sensors and Motor APIs.
First, let's create a new package, example1.
mkdir ~/gocode/src/example1
cd ~/gocode/src/example1
nano main.go
Now paste in the following code:
package main
import (
"github.com/mattrajca/GoEV3/Motor"
"github.com/mattrajca/GoEV3/Sensors"
"time"
)
func main() {
sensor := Sensors.FindInfraredSensor(Sensors.InPort2)
Motor.Run(Motor.OutPortA, 40)
Motor.Run(Motor.OutPortB, 40)
for {
value := sensor.ReadProximity()
if value < 50 {
break
}
time.Sleep(time.Millisecond * 100)
}
Motor.Stop(Motor.OutPortA)
Motor.Stop(Motor.OutPortB)
}
This code assumes we have an infrared sensor attached to input port 2 and two motors attached to output ports A and B.
To run the program, save the file, exit nano, and execute the following command:
go run main.go
The motors on ports A and B will start turning. To stop them, simply extend your hand in front of the infrared sensor.
If you prefer writing and compiling Go programs on your computer, you can cross-compile an ARMv5 binary and transfer it to the EV3 over scp.
Since attaching a USB cable to the EV3 isn't always convenient, instructions for setting up Wi-Fi access can be found here.
We can configure the EV3 to automatically log in to a program launcher at boot. The GoEV3 Launcher will prompt us to run any Go program found in the GOPATH/bin directory. First, edit /etc/login.defs:
nano /etc/login.defs
Add the following line: NO_PASSWORD_CONSOLE tty1:tty2:tty3:tty4:tty5:tty6
Now let's edit /etc/inittab:
nano /etc/inittab
Find a line similar to 1:2345:respawn:/sbin/getty 38400 tty1 and change it to:
1:2345:respawn:/sbin/getty --autologin root 38400 tty1
The EV3 will now automatically log in at boot. Next, we need to obtain the GoEV3 Launcher:
cd ~/gocode/src/github.com/mattrajca
wget -O Launcher.tar.gz --no-check-certificate https://github.com/mattrajca/GoEV3-Launcher/archive/master.tar.gz
tar -xf Launcher.tar.gz
mv GoEV3-Launcher-master Launcher
rm Launcher.tar.gz
cd ~
Let's build it and try it out:
go install github.com/mattrajca/Launcher
gocode/bin/Launcher
Select GoEV3 and hit the Enter (center) button on the EV3.
Finally, let's configure the Launcher to run on login:
nano ~/.bashrc
Add the following lines to the end of the file:
if [ -z "$SSH_CLIENT" ]; then
$GOPATH/bin/Launcher
fi
The GoEV3 Launcher will now run automatically on boot. Reboot the EV3 to try it out.
All function and method calls in GoEV3 are thread-safe.
The complete documentation for GoEV3 can be found on godoc.
GoEV3 is still in its early stages and subject to API changes as the ev3dev project evolves. Filing issues and submitting pull requests are the two best ways to get involved. Documentation improvements, new APIs, example programs, and bug fixes are all welcome.