Arduino sketchbook for MySensorsToolkit example skeches.
git clone https://github.com/mczerski/Arduino-MySensors
git submodule update --init
and then setup Arduino IDE to point to this folder as a sketchbook.
Hardware setup:
- install MySensors AVR boards from https://github.com/mysensors/ArduinoBoards
- select Sensebender board
- select USBASP as pogrammer
- program sketch with programmer
FOTA:
- program sketch using Arduino IDE
- upload hex over-the-air
- program bootloader using Arduino IDE
- board should load uploaded sketch