DeviceConfig 'Button Pin Override' not working

[costonisp]

I tried to set pin 13 as a pin button for my T-beam (hardware T22 v1.0) but it does not reconfigure this pin.

[caveman99]

This is not wired up in the device firmware yet.

[caveman99]

@sachaw can you move this issue to firmware if you got a minute to spare? :-)

[costonisp]

I see, if it's not in the firmware ..yet.., that must also be the reason that PinButton reconfiguration neither works in the python CLI

[caveman99]

The Settings for Button, Buzzer and the RX/TX GPS GPIO lines were introduced at the same time. The button turned out to be a bit of a hassle to implement, so it got left on the side. I'll see if i can wire it up for the 2.1.10 firmware release.

[caveman99]

@costonisp can you try with this firmware: https://github.com/meshtastic/artifacts/blob/device/pr/pr2439-firmware-2.1.10.9eb7a4c.zip?raw=true

[costonisp]

I burned this 2.1.10 firmware and could reconfigure the Button Pin succesfully both with the web interface and with the python CLI.
tnx alot for your dedication.

I will close the issue as solved

[caveman99]

2.1.10 is WIP, so when we release it as alpha the feature will be in the main firmware.