Meshtastic Firmware 2.3.14.64531fa Alpha

Enhancements

• Speed up OLED Display by transferring bigger chunks by @caveman99 in #4138
• Add support for Heltec HRU-3601 by @ndoo in #4129
• Add REGULATORY_GAIN configuration to remain within regulatory ERP limit by @ndoo in #3836
• Make serial port on wio-sdk-wm1110 board work by @geeksville in #4149
• Use upload_protocol = esptool as with the other heltec devices... by @mkgin in #4151
• Standardize lat/lon position logs by @thebentern in #4156
• Pause BLE logging during want_config flow by @thebentern in #4162
• BLE based logging by @thebentern in #4146
• Show compass on waypoint frame; clear when waypoint deleted by @todd-herbert in #4116
• Update NimBLE to 1.4.2 by @thebentern in #4163
• Implement replies for all telemetry types based on variant tag by @GUVWAF in #4164

Bug fixes

• Fix for MESHTASTIC_EXCLUDE_INPUTBROKER by @mverch67 in #4130
• Boot issue fix of Cardkb on ESP32 by @HarukiToreda in #3933
• Mask the I2C rescan for portduino by @caveman99 in #4143
• Fix protobuf structs handling by @mskvortsov in #4140
• Fix INA3221 sensor by @warrenguy in #4168

New Contributors

• @mkgin made their first contribution in #4151
• @warrenguy made their first contribution in #4168

Full Changelog: v2.3.13.83f5ba0...v2.3.14.64531fa

Meshtastic Firmware 2.3.13.83f5ba0 Beta

Enhancements

• Rak10701: support touchscreen by @DanielCao0 in #4104
• New Device, Radiomaster Bandit Micro by @gjelsoe in #4077
• Add support for BMX160/RAK12034 compass module by @jp-bennett in #4021
• Add wind speed and direction to mqtt json output by @tavdog in #4080
• Workaround to disable bluetooth on NRF52 by @todd-herbert in #4055
• Add Heltec Capsule Sensor V3 to the Meshtastic source code by @Heltec-Aaron-Lee in #4086
• Feature-mqtt: add hop_start and hop_limit to MQTT uplink by @ab0oo in #4088
• Update nrf52 platform to 10.5.0 by @thebentern in #4113
• E-Ink screensaver validates short name by @todd-herbert in #4115
• Add NAU7802 based scale controller. by @caveman99 in #4092
• Add RAKwireless WisMesh Hub (RAK2560/RAK9154) by @beegee-tokyo in #4117
• Add rak4631_dap variant for debugging with NanoDAP debug probe device. by @geeksville in #4123

Bug fixes

• Fix uBlox M10 GPS doesn't sleep if device is switched off by @craft4tnt in #4062
• Fix compiler warnings by @thebentern in #4112
• GPS: short update intervals, lock-time prediction by @todd-herbert in #4070
• Ensure data directory ownership is with mesh user by @wnagele in #4097
• Relax changes from #4001 to allow GPS and NTP as trusted sources by @wnagele in #4068
• Update OLED ref by @todd-herbert in #4125

New Contributors

• @craft4tnt made their first contribution in #4062
• @ab0oo made their first contribution in #4088
• @DanielCao0 made their first contribution in #4104
• @beegee-tokyo made their first contribution in #4117

Full Changelog: v2.3.12.24458a7...v2.3.13.83f5ba0

Meshtastic Firmware 2.3.12.24458a7 Beta

Enhancements

• Add TSL2591 lux sensor support by @thebentern in #4014
• TI OPT3001 light sensor support by @thebentern in #4015
• MLX90632 IR temperature sensor support by @thebentern in #4019
• Update Radiolib to 6.6.0 by @caveman99 in #4023
• LR1110 support by @caveman99 in #3013
• DFRobot Lark weather station support by @thebentern in #4032
• Add missing excludes to environmental sensors by @thebentern in #4033
• Radio Master 900 Bandit Nano Power output interpolation by @gjelsoe in #4057
• Add missing hops in traceroute as "unknown" nodes by @GUVWAF in #4056

Bug fixes

• Tryfix random telemetry values by @caveman99 in #4034
• Tryfix bme some more by @caveman99 in #4025
• Minimized build fixes by @Talie5in in #4049
• Avoid assert on receiving undecryptable packet by @GUVWAF in #4059
• Use correct hardware tag for tracker and sdk by @caveman99 in #4036
• Typo: 'our our' to 'of our' by @jcyrio in #4037
• Fix: two button presses sometimes required to wake screen by @todd-herbert in #4052
• Compile without toolchain patching by @caveman99 in #4053
• Fix dead link in EU_868 documentation by @Jorropo in #4048
• Triple-press not disabling GPS by @todd-herbert in #4041
• Fix crash during reset nodedb by @mverch67 in #4017

New Contributors

• @Talie5in made their first contribution in #4049
• @gjelsoe made their first contribution in #4057

Full Changelog: v2.3.11.2740a56...v2.3.12.24458a7

Meshtastic Firmware 2.3.11.2740a56 Beta

Enhancements

• Update platformio/espressif32 to the latest 6.7.0 by @mskvortsov in #3899
• Add canned message free text via touch keyboard and watch face frames to T-Watch S3 by @andrew-moroz in #3941
• Portduino: Catch the keyboard power button and initiate poweroff by @jp-bennett in #3953
• Oled screen emojis by @868meshbot in #3940
• Screen changes from time deltas to timestamps after 15 minutes by @todd-herbert in #3935
• Don't alloc NodeInfo replies when channel utilization is > 40% by @thebentern in #3991
• Added "Hops away" on display by @capslockapocalypse in #3934
• Add support for to_callsign on GeoChats for ATAK by @thebentern in #3996
• User experience improvement - app battery icon by @neilhao in #3979
• Send own node-info earlier and move others to the end of want-config flow by @thebentern in #3949
• Add support for RadioMaster Bandit Nano by @thebentern in #4005
• Added AHTx0 sensor by @fzellini in #3977
• Dragino trackerd by @fzellini in #4002

Bug fixes

• Prevent spontaneous screen-on while charging by @todd-herbert in #3939
• T-Watch-fix: Fully insulate T-Watch free text updates from other hardware platforms by @andrew-moroz in #3966
• Bump portduino to pick up improvements to reboot() by @jp-bennett in #3975
• Fix memory leak when there's no display by @mskvortsov in #3972
• Fix time updates from client device and potentially incorrect UI frame receiving 'toggle watch face' button tap by @andrew-moroz in #3974
• Fix original esp32 boot init panic by @mskvortsov in #3985
• Don't send potentially bogus timestamps with fixed location by @jp-bennett in #4001
• Run tzset() and localtime() in getTZOffset() to ensure proper timezone offset by @jp-bennett in #3999
• Update the Heltec board battery level read accuracy. by @Heltec-Aaron-Lee in #3955
• Tracker v1.1 - fix pin 3 description in variant.h by @jonagnew in #3990
• Tryfix: init change for BME680 by @caveman99 in #3965

New Contributors

• @868meshbot made their first contribution in #3940
• @capslockapocalypse made their first contribution in #3934
• @Heltec-Aaron-Lee made their first contribution in #3955
• @jonagnew made their first contribution in #3990
• @fzellini made their first contribution in #3977

Full Changelog: v2.3.10.d19607b...v2.3.11.2740a56

Meshtastic Firmware 2.3.10.d19607b Beta

Important

If you are seeing sporadic artifacts in environmental telemetry data, we suggest upgrading to 2.3.11 or above.

Enhancements

• Implementation of the sensor VEML7700 by @Dr-Gandalf in #3893
• Add optional define DEBUG_MUTE by @caveman99 in #3859
• Enhanced t-echo file system integrity check by @lewisxhe in #3818
• Unphone has a display, don't default BLE PIN to 123456 by @caveman99 in #3865
• Add bobricius tracksenger variants by @caveman99 in #3866
• Implement "Flip screen" setting for E-Ink displays by @todd-herbert in #3871
• RP2040: Add getFreeHeap() and getHeapSize() support by @GUVWAF in #3890
• Change SHT4X sensors library from Sensirion to Adafruit by @pr000t in #3891
• GPS Chechsum failures by @GPSFan in #3900
• Don't reboot for certain config prefs and make accelerometer thread re-entrant by @thebentern in #3889
• Update sensor libs by @caveman99 in #3904
• Move the power rail init earlier in the startup process on 4630 by @caveman99 in #3925

Bug fixes

• Fix static ip assignment on wifi for rp2040 by @The3rdPlace in #3896
• Remove has screen = 0 from wsl variant by @rcarteraz in #3917
• Lib pax counts threshold #3885 by @caveman99 in #3915
• Adjust refresh for Heltec Wireless Paper V1.1 by @todd-herbert in #3913
• Fix immediate wake from deep-sleep for some devices by @todd-herbert in #3884
• Add psram flag on RAK11200 board definition by @caveman99 in #3887
• Debconf expects absolute paths. by @jp-bennett in #3924
• Remove screen pinning for pico targets by @caveman99 in #3930
• Lock Portduino to MAGIC_USB_BATTERY_LEVEL for now by @jp-bennett in #3894
• Remove logging of actual payload strings (and compressed) for TAK packets by @thebentern in #3922
• Put T-Beam supreme back to the future by @thebentern in #3944
• Add final debug call for Portduino reboot by @jp-bennett in #3945
• Fix native compilation for linux PCs by @mverch67 in #3895

New Contributors

• @Dr-Gandalf made their first contribution in #3893
• @The3rdPlace made their first contribution in #3896

Full Changelog: v2.3.9.f06c56a...v2.3.10.d19607b

Meshtastic Firmware 2.3.9.f06c56a Alpha

Enhancements

Important

If you have a T-Beam Supreme (S3 Core) device, this release has known issues with using the CLI over USB connection, which is fixed in the next release.

• Increase button responsiveness by @todd-herbert in #3801
• T-Echo screen and button performance by @todd-herbert in #3840
• Enable telemetry and power telemetry on the native target by @jp-bennett in #3844
• Default to new vendor ntp pool by @thebentern in #3819
• New variants PROMICRO_DIY by @mrekin in #3788
• Add Sensirion SHT4X sensors by @pr000t in #3792
• Added modifier key combination to allow keyboard shortcuts on t-deck by @nbaddorf in
• Check if packet is not released before CC to phone by @GUVWAF in #3787
• Add MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR exclusion to RCWL9620 by @oseiler2 in #3800
• Support radar sensor RCWL-9620 on i2c by @caveman99 in #3678
• Wiphone by @caveman99 in #3793

Bug fixes

• Fix #MESHTASTIC_EXCLUDE_ENVIRONMENTAL_SENSOR by @oseiler2 in #3776
• Fix the infinite restart caused by unformatted t-echo fs file system by @lewisxhe in #3775
• Enable compiling with gccnoneeabi 12.3.1 for nRF52 targets, additional small fixes by @tuxphone in #3778
• Fix for EnvironmentTelemetry Screen by @HarukiToreda in #3785
• Send fixed position to mesh after setting it by @thebentern in #3803
• Revert "Fix T-Beam S3 USB CLI #3736" by @thebentern in #3809
• Eliminate non-text output for Portduino by @jp-bennett in #3817
  #3668
• First stab at fixing ch341 by @jp-bennett in #3847

New Contributors

• @tuxphone made their first contribution in #3778
• @mrekin made their first contribution in #3788
• @pr000t made their first contribution in #3792

Full Changelog: v2.3.8.d490a33...v2.3.9.f06c56a

Meshtastic Firmware 2.3.8.d490a33 Alpha (Revoked)

Revoked

Important

If you have a T-Beam Supreme (S3 Core) device, this release has an issue with bluetooth pairing failures.

Enhancements

• Rebrand "send network ping" to more honest "try send position" with better output by @thebentern in #3737
• Add Notification on device screen following feature toggle by @HarukiToreda in #3627
• Allow setting hopLimit for MQTT json sendtext and sendposition by @mskvortsov in #3735
• ADC battery readings quicker to reach steady state after boot by @todd-herbert in #3761
• Remove phone nodenum warning and empty else clause by @thebentern in #3756
• Optimization: stop relaying when reply is received by @GUVWAF in #3753
• Publish fixed position updates and consider changes in only altitude as an updated point by @ndoo in #3758
• Update TinyGPSPlus by @titan098 in #3727
• Update Heltec HT-C62 variant based on HT-DEV-ESP board by @ndoo in #3731

Bug fixes

• Fix local time-zones for some regions by @todd-herbert in #3730
• Fix xiao_ble variant build error due to undefined BATTERY_SENSE_RESOLUTION_BITS by @ndoo in #3732
• Fix #if HAS_TELEMETRY when set to 0 by @oseiler2 in #3733
• Fix typo in comment by @jcyrio in #3726
• Don't use "wake on tap or motion" for T-Echo touch button by @todd-herbert in #3745
• Position module should enforce precision for phone originated BROADCAST position packets by @thebentern in #3752
• Fix building new TWC_mesh_v4 board by @caveman99 in #3765
• Fix t-echo gps failure by @lewisxhe in #3763
• Fix T-Beam S3 USB CLI #3736 by @oseiler2 in #3764
• Track actual GPIO values, not just the enum values by @jp-bennett in #3768
• Portduino bump to pick up minor fix by @jp-bennett in #3770

New Contributors

• @jcyrio made their first contribution in #3726
• @HarukiToreda made their first contribution in #3627
• @mskvortsov made their first contribution in #3735

Full Changelog: v2.3.7.30fbcab...v2.3.8.d490a33

Meshtastic Firmware 2.3.7.30fbcab (Revoked)

Revoked due to BLE regression

Enhancements

• Native: add further display parameters by @mverch67 in #3670
• Refactor smart position to use throttle helper by @thebentern in #3671
• Add board and variant definitions for EBYTE_ESP32-S3 by @S5NC in #2882
• Added more clear RTC handling and quality logging by @thebentern in #3691
• Adjust ADC for rak11310 devices by @quimnut in #3698
• Updates for esp32s2 builds by @titan098 in #3693
• Add ability to turn off heartbeat LED blinking by @ndoo in #3674
• Support for generic 4pin RGB LEDs (both CC and CA) and NeoPixels, also RGB LED and vibration notification support for unPhone by @garethhcoleman in #3647
• Add power limit for TW region by @fifieldt in #3701
• [BOARD] Add new variant: TWC_Mesh by @SCWhite in #3705
• Add better support for the Adafruit PiTFT 2.8 for Native by @jp-bennett in #3704
• Add SX1268 modules support for linux-native by @SannySannyman in #3702
• Move to lovyangfx develop for Native by @jp-bennett in #3715
• Split warning into two messages, so we know which one is the case. by @arekm in #3710
• Add conffiles to .deb packaging by @jp-bennett in #3722

Bug fixes

• INA3221 Mis-Identification Fix by @RicInNewMexico in #3681
• (ESP-32S) Fix "critical error 3" after deep-sleep by @todd-herbert in #3685
• Fix crash on shutdown, if Bluetooth not enabled by @todd-herbert in #3686
• Fix for unPhone hangs during boot without sd card present by @garethhcoleman in #3709
• Fixed bug making t-deck reboot when muted by @nbaddorf in #3694
• (E-Ink) Fix issue drawing module frames by @todd-herbert in #3706
• Fix signedness warnings of NRF52 toolchain by @caveman99 in #3697
• Fixed node and channel selection for t-deck by @nbaddorf in #3695
• Also refresh timestamp for "timeonly" fixed position nodes by @thebentern in #3689
• Use correct format specifier and fixed typo. by @Mictronics in #3696

New Contributors

• @nbaddorf made their first contribution in #3694
• @quimnut made their first contribution in #3698
• @fifieldt made their first contribution in #3701
• @SCWhite made their first contribution in #3705
• @SannySannyman made their first contribution in #3702
• @arekm made their first contribution in #3710

Full Changelog: v2.3.6.7a3570a...v2.3.7.30fbcab

Meshtastic Firmware 2.3.6.7a3570a Beta

Important

This release has known issues with deep-sleep on ESP32 devices that are resolved in 2.3.7.

Enhancements

• More useful default input device for Pi 400 by @jp-bennett in #3639
• No more power-state messages printed to screen by @todd-herbert in #3640
• Add support for CDEBYTE_EoRa-S3 by @S5NC in #3613
• Add configuration option for LoRa Region Code override for region-locked builds/variants by @ndoo in #3540
• Better support for ATGM336H GPS modules by @titan098 in #3610
• Cosmetics: rename remaining plugins → modules and less errors by @GUVWAF in #3645
• Add device metrics uptime to MQTT JSON by @thebentern in #3643
• Add multiple SPI devices for Radio, Display, and Touchscreen by @jp-bennett in #3638
• Added one minute throttling to NodeDB save to disk by @thebentern in #3648
• NeighborInfo: Only keep neighbors in RAM by @GUVWAF in #3660

Bug fixes

• Fix #3641: Always set MAC when picking new NodeNum by @GUVWAF in #3651
• Fix: don't enable the CDC interface already at boot by @oseiler2 in #3652
• (ESP32) Fix bluetooth after light-sleep; de-init for deep-sleep by @todd-herbert in #3655
• Fixed XPT2046 syntax and using unPhone library to clean up support by @garethhcoleman in #3631
• StoreForward: Remove assert when receiving unhandled case by @GUVWAF in #3661
• Uplink to MQTT after potentially altering content by @GUVWAF in #3646

Full Changelog: v2.3.5.2f9b68e...v2.3.6.7a3570a

Meshtastic Firmware 2.3.5.2f9b68e Alpha

Enhancements

• Add unPhone by @rcarteraz in #3584
• Add BME680 IAQ reading by @caveman99 in #3580
• Add more useful error output in radio interfaces by @jp-bennett in #3615
• LSM6DS3TR-C support by @garethhcoleman in #3593
• Pin RadioLib to 6.5.x by @jp-bennett in #3601
• Enable T-Echo touch button by default by @todd-herbert in #3604
• Auto-favorite our node by @thebentern in #3609
• File management changes (Part 1 - LoadFileResult) by @thebentern in #3625
• TFT device powersave (part 3) by @mverch67 in #3600
• Support for alt I2C address for LSM6DS3 sensor, identification of TCA9555 IO Expander, resolve serial hang issue by @garethhcoleman in #3622
• Update to nanopb 0.4.8 and fix proto regen script by @caveman99 in #3578
• Device telemetry uptime in seconds by @thebentern in #3614

Bug fixes

• Only set NodeNum based on MAC if it's still zero by @GUVWAF in #3585
• Fix button interrupt after light sleep by @todd-herbert in #3587
• Fix: device PMU shutdown (part 2) by @mverch67 in #3596
• T-Beam S3 core - enable USB CDC by @oseiler2 in #3597
• Fix: device sleep (part 1) by @mverch67 in #3590
• Fix: TinyGPSAltitude support for negative altitude by @thebentern in #3605
• Drop unishox2 functions from Router by @jp-bennett in #3606
• Fix another LOG_DEBUG message that should be LOG_ERROR by @jp-bennett in #3607
• Update portduino to include SPI and setSetial fixes by @jp-bennett in #3611
• Fix: UpDown CARDKB button press by @mverch67 in #3612
• Make sure settingsStrings get initialized by @jp-bennett in #3621
• Zero hop always for connected node by @thebentern in #3634
• Wireless Paper: Fix BLE after Lightsleep by @todd-herbert in #3629
• File management changes (Part 2 - Reboot instead of reformat NRF52 after two failed file saves) by @thebentern in #3630

New Contributors

• @oseiler2 made their first contribution in #3597

Full Changelog: v2.3.4.ea61808...v2.3.5.2f9b68e