Change default branch to "main"

[kashifest]

Addresses this.

This has already been done in CAPM3 and IPAM. Check these repo's for reference.

[kashifest]

Prerequisites

• Create an issue in your repo to track the branch rename.
  You can paste this checklist in the issue body.

• If you are not a root approver for the repo, assign a root
  approver for approval.

• Once the issue has been approved, send a notice to your SIG's
  mailing list about the potential branch rename.

Changes pre-rename

Make the following changes before renaming the branch the master branch.

Note: There might be additional changes required that have not been
covered in this checklist.

Note: There might be additional information available in the umbrella issue via [kubernetes/org#2222].

Anytime

These changes are non-disruptive and can be made anytime before renaming
the branch.

• If a presubmit or postsubmit prowjob triggers on the master branch
  (branches field of the prowjob), add the main branch to the list
  (see kubernetes/test-infra#20665 for an example).

• If the milestone_applier prow config references the master branch,
  add the main branch to the config (see kubernetes/test-infra#20675 for an example).

• If the branch_protection prow config references the master branch,
  add the main branch to the config.

Just before rename

These changes are disruptive and should be made just before renaming the
branch.

• For periodic prowjobs, or any prowjob that mentions the master branch
  in base_ref, update them to the main branch. Ensure that these changes
  happen in lock-step with the branch rename (jobs triggered in between landing
  these changes and renaming the branch will fail).

  • For bootstrap-based jobs, ensure the branch is explicitly specified,
    e.g. kubernetes/foo=main. kubernetes/test-infra#20667 may eventually
    allow for non-disruptive changes.
  • For pod-utils based jobs, ensure the branch is explicitly specified,
    e.g. base_ref: main. kubernetes/test-infra#20672 may eventually allow
    for non-disruptive changes.

• If a prowjob mentions master in its name, rename the job to not include
  the branch name, e.g. pull-repo-verify-master -> pull-repo-verify.
  status-reconciler should automatically migrate PR status contexts to the
  new job name, and retrigger accordingly, but we have anecdotally found it
  sometimes misses changes.

  • NOTE: our infrastructure doesn't understand the concept of job renames, so
    from the perspective of e.g. https://testgrid.k8s.io the job will appear to
    have lost history and start from scratch.

• If a prowjob calls scripts or code in your repo that explicitly
  reference master, update all references to use main, or auto-detect the
  remote branch

  • e.g. using git to auto-detect

  # for existing clones, update their view of the remote
  git fetch origin
  git remote set-head origin -a
  # for new clones, or those updated as above, this prints "main" post-rename
  echo $(git symbolic-ref refs/remotes/origin/HEAD)

  • e.g. using github's api to auto-detect

  # gh is https://github.com/cli/cli, this will print "main" post-rename
  gh api /repos/kubernetes-sigs/slack-infra | jq -r .default_branch

• If the repo has netlify configured for it, ask a member of the GitHub
  Management Team to rename the master branch to main in the netlify site config.
  It can't be controlled through the netlify config in the repo.

Approval

• Once all non-disruptive tasks have been completed and disruptive tasks
  have been identified, assign the GitHub Management team (@kubernetes/owners)
  for approval.

Rename the default branch

• Rename the default branch from master to main using the GitHub UI
  by following the official instructions.

Changes post-rename

After the default branch has been renamed to main, make the following
changes.

Note: There might be additional changes required that have not been
covered in this checklist.

Prowjobs

• If a prowjob still references the master branch in the branches field,
  remove the master branch (see kubernetes/test-infra#20669 for an example).

Prow config

• If the milestone_applier prow config references the master branch,
  remove it from the config.

• If the branch_protection prow config references the master branch,
  remove it from the config.

Other

• If any docs reference the master branch, update to main
  (URLs will be automatically redirected).

• Ensure that CI and PR tests work fine.

  • If there are any outstanding PRs you can /approve to merge, do so to verify
    that presubmits and postsubmits work as expected

• Trial the local development experience with a pre-rename clone.

  • ensure Github instructions to rename your local branch work
  • consider updating your fork's default remote branch name such that if you
    have git autocompletion enabled, typing ma<tab> will autocomplete to main

• Send a notice about the branch rename to your SIG's mailing list.
  Include the link to the GitHub instructions to rename your local branch.

[ravipwaghmare]

@digambar15 @maelk @zaneb @russellb Please take a look, If something is needed from our end, please let us know.

[Rozzii]

/triage accepted
/assign @ravipwaghmare @Ashughorla
please @ravipwaghmare @Ashughorla take a look

[Rozzii]

/assign @ravipwaghmare
/assign @Ashughorla

[metal3-io-bot]

Issues go stale after 90d of inactivity.
Mark the issue as fresh with /remove-lifecycle stale.
Stale issues will close after an additional 30d of inactivity.

If this issue is safe to close now please do so with /close.

/lifecycle stale

[metal3-io-bot]

@Rozzii:
This request has been marked as needing help from a contributor.

Please ensure the request meets the requirements listed here.

If this request no longer meets these requirements, the label can be removed
by commenting with the /remove-help command.

In response to this:

/help

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.

[Rozzii]

/cc @Ashughorla
/cc @@ravipwaghmare
Please act on this issue, this is a CNCF request and could cause problems for the whole Metal3 community.
/remove-lifecycle stale

[Ashughorla]

@Rozzii
We will raise PR for this ASAP.
Apology for late response.

[Rozzii]

I think we are done @kashifest

[kashifest]

I think we are done @kashifest

Yes

[Rozzii]

/close

[metal3-io-bot]

@Rozzii: Closing this issue.

In response to this:

/close

Instructions for interacting with me using PR comments are available here. If you have questions or suggestions related to my behavior, please file an issue against the kubernetes/test-infra repository.