Change the repository type filter
All
Repositories list
124 repositories
- This is a demo application which provides a command line interface for these 6 applications of NAFE13388 for Analog to Digital Conversion.<br>Current Sensing using SCSR Conversion Voltage Sensing using SCSR Conversion Voltage Sensing using MCMR Conversion RTD 2/4 Wires using SCCR Conversion Weight Scale
- The Portable Anomaly Detect demo shows an on-device trainable anomaly detection platform that is based on the FRDM-MCXN947 board. The demo shows how to train the SVM model on-device with FXLS8974CF accelerometer data and inference SVM model on-device too.During the whole life cycle of a device, learning may need to be done multiple times.
- This demo serves as guide on enabling FXLS897xxx accelerometer over I2C and light sensor over ADC readings. The ADC conversions are trigger by a hardware timer trigger. The I2C transfers make use of CMSIS-Drives. Interact application through the IoT Toolbox using a Smartphone.
- EasyEVSE is a simulated electric vehicle charging station, J1772 compliant, connected to the Microsoft Azure IoT Central over Ethernet or Wi-Fi communication. The provided application is available in 2 flavors. One is the basic enablement, available on github, while the full enablement can be found at nxp.com.
dm-wifi-cli-frdm-mcxn947
Public.github
Public- his demo application provides various Motor Control interfaces like fault detection (over, under voltage and active current limits etc ) , Fault detection control and Motor can be either control by PWM or SPI. Using PWM speed can be controlled by changing the duty cycles.
- This example provides CMSIS Compliant APIs to configure different device configurations of SJA1124. It also provides the APIS lmentioned below :LIN traffic send/receive in between commander and responder.Low power mode support . Device configuration support
- The 33926 is a SMARTMOS monolithic H-bridge power IC designed primarily for automotive electronic throttle control, but is applicable to any low-voltage DC servo motor control application within the current and voltage limits stated in this specification.
- The objective of this application note is to help developers migrating their applications from the RW612-FRDM board to their module-based board. This application note contains: An overview of what does imply to move your application to a different board with different Flash and pSRAM.Flash configuration files
- The EVSE-SIG-BRD is an add-on development board that supports electric vehicle supply equipment(EVSE) platform development. The board also supports the proximity pilot, ground fault circuit interrupter (GFCI), and relay drive features. The main host of the system is on a separate processor development board