RushDev-v0.18.0

• Added full support for devices with different FTDI chips for device detection and UART commuications. ex. CVP-13.
• Added up to 3x speed increase for loading bitstreams with --ftdi-cmd="config --jtag=0" option, see example script prepare-mining-gram-ecu50.sh for an example use.
• Added progress feedback for changing voltage.
• Enabled Text User Interface and interactive non-TUI mode.
• Added shortcut keys to change --log-level and clock

Bug Fixes

A bunch but notably...

• loading bitstreams were hindered in speed by open UART's at the same time
• if the FPGA goes nuts and sends a large stream of bytes, RushDev would crash.
• verify commands in previous versions could miss thresholds

RushDev v0.14.0

• Added log-level=off to allow silent mode.
• Added FTDI command to query devices and output to terminal without extra app logging line text. ex. --ftdi-cmd="list -d -o"
• Added ability to force sending DNA to voltage control even if device is not detected by RushDev with that DNA.
• Added a max bytes setting to monitoring packet data.
• Added requirement to use option --unsafe-force combined with -a for load bitstream to all devices. Detects if only -a is used and devices are not of all the same type, disallowing bitstream loading.
• voltage option to assume success if timeout, error if option is not supplied

Bug Fixes

• temporarily removed voltage control success detection based on flawed assumption. For now use the user determined "best" timeout until better solution.
• VU33P/CIV; FK33/TH53M/TH53/E333C DNA and temp detection fixed.
• error report if files supplied to load bitstream are missing
• fix terminal output was not echoing typed character after voltage control

RushDev v0.11.0

Improved voltage control to use better configuration that doesn't require anything other than the 'changeVoltage' to be moved into the 'util' folder.

Bug Fixes

Voltage control setting was incorrect if you use it for all devices.

RushDev v0.10.0

Adds support for Ubuntu 16.04
Adds support for voltage change

• Voltage change integrated but requires external utility from other miners 'changeVoltage'. You need to put it in the 'util' folder with bits folder that comes with it.

Bug Fixes

Fixes specifying devices with serial number on TH53 was not detecting device.

RushDev v0.8.0

Initial Release