Mipi-dbi-spi display on SPI interface is non-working in X as well as Wayland #5615
Description
Describe the bug
I have a small 240x240pixels display with a controller which is MIPI-DBI compliant (ST7789VW). Wrote a custom tinyDRM compliant driver for the display which was only working when booted to CLI; in X I was unable to get the desktop shown on the display.
Find details on my custom driver + overlay: here https://forums.raspberrypi.com/viewtopic.php?t=355870
Then decided to switch to the in-tree driver and make use of 'panel-mipi-dbi.c' + it's related overlay instead to check if my custom driver has issues, or, if the result is the same.
I've created a panel.bin file in lib/firmware which has the required initialization commands for my display.
Tested my driver as well as the upstream driver of below kernels; non of them (!) is starting the SPI display in X. The display works when booted to CLI, when booting to GUI it works as long as FW is active, it's switched off/fails when KMS takes over:
- 6.1.5x
- 6.5.5 (log below are from the current kernel)
- 6.6.0-rc3
Steps to reproduce the behaviour
Display which I'm currently testing with: https://www.waveshare.com/pico-lcd-1.3.htm
Any MIPI-DBI compliant display will do!
1.) Prepare a 'panel.bin' file according to the requirements explained in https://github.com/raspberrypi/linux/blob/cc08810f89e52337a99cc6ae5f53f08588357c5f/drivers/gpu/drm/tiny/panel-mipi-dbi.c
The default overlay (https://github.com/raspberrypi/linux/blob/rpi-6.1.y/arch/arm/boot/dts/overlays/mipi-dbi-spi-overlay.dts) expects the file with parameters/commands for initialization from the file 'panel.bin' in '/lib/firmware'
2.) Change config.txt to start the SPI display with the right set of GPIO configuration
3.) see the display working in CLI and failing in X
Device (s)
Raspberry Pi CM4, Raspberry Pi CM4 Lite
System
pi@WaveC-2GB-NVMe:~ $ cat /etc/rpi-issue
Raspberry Pi reference 2023-05-03
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 7c750947a959fb626a70c09fd17c65815df192ac, stage4
pi@WaveC-2GB-NVMe:~ $ vcgencmd version
Apr 25 2023 18:26:03
Copyright (c) 2012 Broadcom
version d7f9c2b4ef7e4a8c0b04374a879ce89d7a948453 (clean) (release) (start)
pi@WaveC-2GB-NVMe:~ $ uname -a
Linux WaveC-2GB-NVMe 6.5.5-v8+ #1 SMP PREEMPT Tue Sep 26 09:24:49 CEST 2023 aarch64 GNU/Linux
Logs
System Information
Raspberry Pi Compute Module 4 Rev 1.1
PRETTY_NAME="Debian GNU/Linux 11 (bullseye)"
NAME="Debian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
Raspberry Pi reference 2023-05-03
Generated using pi-gen, https://github.com/RPi-Distro/pi-gen, 7c750947a959fb626a70c09fd17c65815df192ac, stage4
Linux WaveC-2GB-NVMe 6.5.5-v8+ #1 SMP PREEMPT Tue Sep 26 09:24:49 CEST 2023 aarch64 GNU/Linux
Revision : b03141
Serial : 10000000ec0f48c5
Model : Raspberry Pi Compute Module 4 Rev 1.1
Throttled flag : throttled=0x0
Camera : supported=0 detected=0, libcamera interfaces=0
Videocore information
Apr 25 2023 18:26:03
Copyright (c) 2012 Broadcom
version d7f9c2b4ef7e4a8c0b04374a879ce89d7a948453 (clean) (release) (start)
alloc failures: 0
compactions: 0
legacy block fails: 0
Filesystem information
Filesystem 1K-blocks Used Available Use% Mounted on
/dev/root 60811100 26957728 30731916 47% /
devtmpfs 681504 0 681504 0% /dev
tmpfs 945952 0 945952 0% /dev/shm
tmpfs 378384 1204 377180 1% /run
tmpfs 5120 4 5116 1% /run/lock
/dev/mmcblk0p1 258095 93023 165073 37% /boot
tmpfs 189188 20 189168 1% /run/user/1000
Filename Type Size Used Priority
/var/swap file 102396 0 -2
Package version information
raspberrypi-ui-mods:
Installed: 1.20230127
raspberrypi-sys-mods:
Installed: 20230510~bullseye
openbox:
Installed: 3.6.1-9+rpt1+deb11u1
lxpanel:
Installed: 0.10.1-2+rpt19
pcmanfm:
Installed: 1.3.2-1+rpt9
rpd-plym-splash:
Installed: 0.32
Networking Information
eth0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 0 bytes 0 (0.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet x.x.x.x netmask x.x.x.x
inet6 ::1 prefixlen 128 scopeid 0x10
loop txqueuelen 1000 (Local Loopback)
RX packets 25 bytes 2653 (2.5 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 25 bytes 2653 (2.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlan0: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet x.x.x.x netmask x.x.x.x broadcast x.x.x.x
inet6 y::y.y.y.y prefixlen 64 scopeid 0x20
inet6 y::y.y.y.y prefixlen 64 scopeid 0x0
ether m.m.m.m txqueuelen 1000 (Ethernet)
RX packets 1465 bytes 175074 (170.9 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 850 bytes 372273 (363.5 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
USB Information
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=dwc2/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
Display Information
Running (F)KMS and X
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 7680 x 7680
HDMI-1 disconnected primary (normal left inverted right x axis y axis)
Identifier: 0x45
Timestamp: 9884
Subpixel: unknown
Clones:
CRTCs: 3
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
max bpc: 8
range: (8, 12)
bottom margin: 0
range: (0, 100)
top margin: 0
range: (0, 100)
right margin: 0
range: (0, 100)
left margin: 0
range: (0, 100)
Colorspace: Default
supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 32
supported: 32
non-desktop: 0
range: (0, 1)
HDMI-2 disconnected (normal left inverted right x axis y axis)
Identifier: 0x46
Timestamp: 9884
Subpixel: unknown
Clones:
CRTCs: 4
Transform: 1.000000 0.000000 0.000000
0.000000 1.000000 0.000000
0.000000 0.000000 1.000000
filter:
Broadcast RGB: Automatic
supported: Automatic, Full, Limited 16:235
max bpc: 8
range: (8, 12)
bottom margin: 0
range: (0, 100)
top margin: 0
range: (0, 100)
right margin: 0
range: (0, 100)
left margin: 0
range: (0, 100)
Colorspace: Default
supported: Default, SMPTE_170M_YCC, BT709_YCC, XVYCC_601, XVYCC_709, SYCC_601, opYCC_601, opRGB, BT2020_CYCC, BT2020_RGB, BT2020_YCC, DCI-P3_RGB_D65, DCI-P3_RGB_Theater
link-status: Good
supported: Good, Bad
CONNECTOR_ID: 41
supported: 41
non-desktop: 0
range: (0, 1)
Connector 0 (32) HDMI-A-1 (disconnected)
Encoder 0 (31) TMDS
Connector 1 (41) HDMI-A-2 (disconnected)
Encoder 1 (40) TMDS
HDMI0: HDMI_HOTPLUG = 0x00000000
HDMI1: HDMI_HOTPLUG = 0x00000000
/sys/kernel/debug/dri/1/state:
plane[45]: plane-0
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[62]: plane-1
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[73]: plane-2
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[84]: plane-3
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[95]: plane-4
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[106]: plane-5
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[117]: plane-6
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=1
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[127]: plane-7
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=2
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[137]: plane-8
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=3
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[147]: plane-9
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=4
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[157]: plane-10
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=5
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[167]: plane-11
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=6
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[177]: plane-12
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=7
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[187]: plane-13
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=8
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[197]: plane-14
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=9
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[207]: plane-15
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=a
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[217]: plane-16
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=b
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[227]: plane-17
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=c
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[237]: plane-18
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=d
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[247]: plane-19
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=e
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[257]: plane-20
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=f
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[267]: plane-21
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=10
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[277]: plane-22
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[287]: plane-23
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[297]: plane-24
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[307]: plane-25
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[317]: plane-26
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
plane[327]: plane-27
crtc=(null)
fb=0
crtc-pos=0x0+0+0
src-pos=0.000000x0.000000+0.000000+0.000000
rotation=1
normalized-zpos=11
color-encoding=ITU-R BT.709 YCbCr
color-range=YCbCr limited range
crtc[55]: txp
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[72]: pixelvalve-0
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[83]: pixelvalve-1
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[94]: pixelvalve-2
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[105]: pixelvalve-4
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
crtc[116]: pixelvalve-3
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
connector[32]: HDMI-A-1
crtc=(null)
self_refresh_aware=0
max_requested_bpc=8
colorspace=Default
connector[41]: HDMI-A-2
crtc=(null)
self_refresh_aware=0
max_requested_bpc=8
colorspace=Default
connector[61]: Writeback-1
crtc=(null)
self_refresh_aware=0
max_requested_bpc=0
colorspace=Default
/sys/kernel/debug/dri/2/state:
plane[32]: plane-0
crtc=(null)
fb=0
crtc-pos=240x240+0+0
src-pos=240.000000x240.000000+0.000000+0.000000
rotation=1
normalized-zpos=0
color-encoding=ITU-R BT.601 YCbCr
color-range=YCbCr limited range
crtc[34]: crtc-0
enable=0
active=0
self_refresh_active=0
planes_changed=0
mode_changed=0
active_changed=0
connectors_changed=0
color_mgmt_changed=0
plane_mask=0
connector_mask=0
encoder_mask=0
mode: "": 0 0 0 0 0 0 0 0 0 0 0x0 0x0
connector[31]: SPI-1
crtc=(null)
self_refresh_aware=0
max_requested_bpc=0
colorspace=Default
config.txt
arm_64bit=1
arm_boost=1
arm_freq=2200
audio_pwm_mode=514
camera_auto_detect=-1
config_hdmi_boost=5
core_freq=500
core_freq_min=200
disable_commandline_tags=2
disable_l2cache=1
disable_overscan=1
display_hdmi_rotate=-1
display_lcd_rotate=-1
dvfs=3
enable_gic=1
force_eeprom_read=1
force_pwm_open=1
framebuffer_ignore_alpha=1
framebuffer_swap=1
gpu_freq=500
gpu_freq_min=250
ignore_lcd=1
init_uart_clock=0x2dc6c00
mask_gpu_interrupt0=3072
mask_gpu_interrupt1=25635
max_framebuffers=2
over_voltage_avs=-10000
pause_burst_frames=1
program_serial_random=1
total_mem=2048
hdmi_force_cec_address:0=65535
hdmi_force_cec_address:1=65535
hdmi_pixel_freq_limit:0=0x11e1a300
hdmi_pixel_freq_limit:1=0x11e1a300
device_tree=-
overlay_prefix=overlays/
hdmi_cvt:0=
hdmi_cvt:1=
hdmi_edid_filename:0=
hdmi_edid_filename:1=
hdmi_timings:0=
hdmi_timings:1=
cmdline.txt
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=D8:3A:DD:5F:AC:2D vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=611f461c-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
raspi-gpio settings
BANK0 (GPIO 0 to 27):
GPIO 0: level=1 fsel=0 func=INPUT pull=UP
GPIO 1: level=1 fsel=0 func=INPUT pull=UP
GPIO 2: level=1 fsel=0 func=INPUT pull=UP
GPIO 3: level=1 fsel=0 func=INPUT pull=UP
GPIO 4: level=1 fsel=0 func=INPUT pull=UP
GPIO 5: level=1 fsel=0 func=INPUT pull=UP
GPIO 6: level=1 fsel=0 func=INPUT pull=UP
GPIO 7: level=1 fsel=1 func=OUTPUT pull=UP
GPIO 8: level=1 fsel=1 func=OUTPUT pull=UP
GPIO 9: level=0 fsel=4 alt=0 func=SPI0_MISO pull=DOWN
GPIO 10: level=0 fsel=4 alt=0 func=SPI0_MOSI pull=DOWN
GPIO 11: level=1 fsel=4 alt=0 func=SPI0_SCLK pull=DOWN
GPIO 12: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 13: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 14: level=1 fsel=0 func=INPUT pull=NONE
GPIO 15: level=1 fsel=0 func=INPUT pull=UP
GPIO 16: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 17: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 18: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 19: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 20: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 21: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 22: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 23: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 24: level=0 fsel=1 func=OUTPUT pull=DOWN
GPIO 25: level=1 fsel=1 func=OUTPUT pull=DOWN
GPIO 26: level=0 fsel=0 func=INPUT pull=DOWN
GPIO 27: level=1 fsel=1 func=OUTPUT pull=DOWN
BANK1 (GPIO 28 to 45):
GPIO 28: level=1 fsel=2 alt=5 func=RGMII_MDIO pull=UP
GPIO 29: level=0 fsel=2 alt=5 func=RGMII_MDC pull=DOWN
GPIO 30: level=0 fsel=7 alt=3 func=CTS0 pull=UP
GPIO 31: level=0 fsel=7 alt=3 func=RTS0 pull=NONE
GPIO 32: level=1 fsel=7 alt=3 func=TXD0 pull=NONE
GPIO 33: level=1 fsel=7 alt=3 func=RXD0 pull=UP
GPIO 34: level=1 fsel=7 alt=3 func=SD1_CLK pull=NONE
GPIO 35: level=1 fsel=7 alt=3 func=SD1_CMD pull=UP
GPIO 36: level=1 fsel=7 alt=3 func=SD1_DAT0 pull=UP
GPIO 37: level=1 fsel=7 alt=3 func=SD1_DAT1 pull=UP
GPIO 38: level=1 fsel=7 alt=3 func=SD1_DAT2 pull=UP
GPIO 39: level=1 fsel=7 alt=3 func=SD1_DAT3 pull=UP
GPIO 40: level=1 fsel=0 func=INPUT pull=DOWN
GPIO 41: level=1 fsel=0 func=INPUT pull=DOWN
GPIO 42: level=0 fsel=1 func=OUTPUT pull=DOWN
GPIO 43: level=1 fsel=0 func=INPUT pull=DOWN
GPIO 44: level=1 fsel=0 func=INPUT pull=NONE
GPIO 45: level=1 fsel=0 func=INPUT pull=NONE
BANK2 (GPIO 46 to 53):
GPIO 46: level=0 fsel=0 func=INPUT pull=UP
GPIO 47: level=0 fsel=0 func=INPUT pull=UP
GPIO 48: level=0 fsel=4 alt=0 func=SD0_CLK pull=DOWN
GPIO 49: level=0 fsel=4 alt=0 func=SD0_CMD pull=DOWN
GPIO 50: level=0 fsel=4 alt=0 func=SD0_DAT0 pull=DOWN
GPIO 51: level=0 fsel=4 alt=0 func=SD0_DAT1 pull=DOWN
GPIO 52: level=0 fsel=4 alt=0 func=SD0_DAT2 pull=DOWN
GPIO 53: level=0 fsel=4 alt=0 func=SD0_DAT3 pull=DOWN
vcdbg log messages
002280.481: arasan: arasan_emmc_open
002280.652: arasan: arasan_emmc_set_clock C0: 0x00800000 C1: 0x000e0047 emmc: 200000000 actual: 390625 div: 0x00000100 target: 400000 min: 400000 max: 400000 delay: 5
002385.427: arasan: arasan_emmc_set_clock C0: 0x00800000 C1: 0x000e0047 emmc: 200000000 actual: 390625 div: 0x00000100 target: 400000 min: 400000 max: 400000 delay: 5
002385.513: arasan: arasan_emmc_set_clock C0: 0x00800f00 C1: 0x000e0047 emmc: 200000000 actual: 390625 div: 0x00000100 target: 400000 min: 390000 max: 400000 delay: 5
002419.431: arasan: arasan_emmc_set_clock C0: 0x00800f06 C1: 0x000e0207 emmc: 200000000 actual: 50000000 div: 0x00000002 target: 50000000 min: 0 max: 50000000 delay: 1
002430.278: brfs: File read: /mfs/sd/config.txt
002431.109: brfs: File read: 1647 bytes
002454.584: HDMI0:EDID error reading EDID block 0 attempt 0
002455.601: HDMI0:EDID giving up on reading EDID block 0
002467.311: HDMI1:EDID error reading EDID block 0 attempt 0
002468.326: HDMI1:EDID giving up on reading EDID block 0
002477.948: brfs: File read: /mfs/sd/config.txt
002478.744: gpioman: gpioman_get_pin_num: pin DISPLAY_SDA not defined
002478.760: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
002935.706: gpioman: gpioman_get_pin_num: pin LEDS_PWR_OK not defined
002936.991: *** Restart logging
002937.011: brfs: File read: 1647 bytes
002947.430: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
002948.448: hdmi: HDMI0:EDID giving up on reading EDID block 0
002953.490: hdmi: HDMI0:EDID error reading EDID block 0 attempt 0
002954.504: hdmi: HDMI0:EDID giving up on reading EDID block 0
002954.523: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
002959.567: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0
002960.583: hdmi: HDMI1:EDID giving up on reading EDID block 0
002965.624: hdmi: HDMI1:EDID error reading EDID block 0 attempt 0
002966.641: hdmi: HDMI1:EDID giving up on reading EDID block 0
002966.657: hdmi: HDMI:hdmi_get_state is deprecated, use hdmi_get_display_state instead
002966.670: HDMI0: hdmi_pixel_encoding: 300000000
002966.684: HDMI1: hdmi_pixel_encoding: 300000000
002967.010: kernel=
002976.199: gpioman: gpioman_get_pin_num: pin CAMERA_0_I2C_PORT not defined
002980.480: dtb_file 'bcm2711-rpi-cm4.dtb'
002986.962: brfs: File read: /mfs/sd/bcm2711-rpi-cm4.dtb
002986.979: Loaded 'bcm2711-rpi-cm4.dtb' to 0x100 size 0xd71f
003000.751: brfs: File read: 55071 bytes
003020.602: brfs: File read: /mfs/sd/overlays/overlay_map.dtb
003045.076: brfs: File read: 2347 bytes
003050.616: brfs: File read: /mfs/sd/config.txt
003051.140: brfs: File read: 1647 bytes
003071.680: brfs: File read: /mfs/sd/overlays/vc4-kms-v3d-pi4.dtbo
003134.071: Loaded overlay 'vc4-kms-v3d'
003134.262: dtparam: ant2=true
003321.046: brfs: File read: 3913 bytes
003328.777: brfs: File read: /mfs/sd/overlays/dwc2.dtbo
003334.970: Loaded overlay 'dwc2'
003334.982: dtparam: dr_mode=host
003346.316: brfs: File read: 801 bytes
003361.773: brfs: File read: /mfs/sd/overlays/mipi-dbi-spi.dtbo
003382.818: Loaded overlay 'mipi-dbi-spi'
003382.832: dtparam: spi0-0=true
003383.477: dtparam: speed=48000000
003383.884: dtparam: write-only=true
003384.390: dtparam: cpha=true
003384.911: dtparam: cpol=true
003385.461: dtparam: width=240
003385.911: dtparam: height=240
003386.371: dtparam: width-mm=23
003386.806: dtparam: height-mm=23
003387.260: dtparam: reset-gpio=27
003388.321: dtparam: dc-gpio=25
003389.398: dtparam: backlight-gpio=24
003439.151: brfs: File read: 5165 bytes
003443.956: brfs: File read: /mfs/sd/cmdline.txt
003444.003: Read command line from file 'cmdline.txt':
003444.017: 'console=serial0,115200 console=tty1 root=PARTUUID=611f461c-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles'
003549.007: brfs: File read: 148 bytes
005737.928: brfs: File read: /mfs/sd/kernel8.img
005737.949: Loaded 'kernel8.img' to 0x80000 size 0x176ca00
005761.593: Kernel relocated to 0x200000
005761.605: Device tree loaded to 0x2eff2100 (size 0xde58)
005766.802: gpioman: gpioman_get_pin_num: pin SDCARD_CONTROL_POWER not defined
007713.623: vchiq_core: vchiq_init_state: slot_zero = 0xcf080000, is_master = 1
011566.029: gpioman: gpioman_get_pin_num: pin FLASH_0_ENABLE not defined
011566.069: gpioman: gpioman_get_pin_num: pin FLASH_0_INDICATOR not defined
011566.167: gpioman: gpioman_get_pin_num: pin FLASH_0_ENABLE not defined
011566.202: gpioman: gpioman_get_pin_num: pin FLASH_0_INDICATOR not defined
dmesg log
[ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd083]
[ 0.000000] Linux version 6.5.5-v8+ (pi@WaveC-2GB-NVMe) (gcc (Debian 10.2.1-6) 10.2.1 20210110, GNU ld (GNU Binutils for Debian) 2.35.2) #1 SMP PREEMPT Tue Sep 26 09:24:49 CEST 2023
[ 0.000000] KASLR enabled
[ 0.000000] random: crng init done
[ 0.000000] Machine model: Raspberry Pi Compute Module 4 Rev 1.1
[ 0.000000] efi: UEFI not found.
[ 0.000000] Reserved memory: created CMA memory pool at 0x000000000ec00000, size 512 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x000000000ec00000..0x000000002ebfffff (524288 KiB) map reusable linux,cma
[ 0.000000] OF: reserved mem: 0x000000003ef63480..0x000000003ef6387f (1 KiB) nomap non-reusable nvram@1
[ 0.000000] OF: reserved mem: 0x000000003ef638c0..0x000000003ef63a73 (0 KiB) nomap non-reusable nvram@0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x000000003fffffff]
[ 0.000000] DMA32 [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x000000003b3fffff]
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007fffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000007fffffff]
[ 0.000000] On node 0, zone DMA32: 19456 pages in unavailable ranges
[ 0.000000] percpu: Embedded 30 pages/cpu s84840 r8192 d29848 u122880
[ 0.000000] pcpu-alloc: s84840 r8192 d29848 u122880 alloc=30*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Detected PIPT I-cache on CPU0
[ 0.000000] CPU features: detected: Spectre-v2
[ 0.000000] CPU features: detected: Spectre-v3a
[ 0.000000] CPU features: detected: Spectre-v4
[ 0.000000] CPU features: detected: Spectre-BHB
[ 0.000000] CPU features: kernel page table isolation forced ON by KASLR
[ 0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[ 0.000000] CPU features: detected: ARM erratum 1742098
[ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923
[ 0.000000] alternatives: applying boot alternatives
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_hdmi=0 smsc95xx.macaddr=m.m.m.m vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 console=ttyS0,115200 console=tty1 root=PARTUUID=611f461c-02 rootfstype=ext4 fsck.repair=yes rootwait quiet splash plymouth.ignore-serial-consoles
[ 0.000000] Unknown kernel command line parameters "splash", will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 496944
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] software IO TLB: area num 4.
[ 0.000000] software IO TLB: mapped [mem 0x0000000037400000-0x000000003b400000] (64MB)
[ 0.000000] Memory: 1363012K/2019328K available (12992K kernel code, 2162K rwdata, 4076K rodata, 4608K init, 1083K bss, 132028K reserved, 524288K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 41677 entries in 163 pages
[ 0.000000] ftrace: allocated 163 pages with 4 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Preemptible hierarchical RCU implementation.
[ 0.000000] rcu: RCU event tracing is enabled.
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
[ 0.000000] Trampoline variant of Tasks RCU enabled.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[ 0.000000] Root IRQ handler: gic_handle_irq
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 54.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xc743ce346, max_idle_ns: 440795203123 ns
[ 0.000001] sched_clock: 56 bits at 54MHz, resolution 18ns, wraps every 4398046511102ns
[ 0.000342] Console: colour dummy device 80x25
[ 0.000362] printk: console [tty1] enabled
[ 0.000462] Calibrating delay loop (skipped), value calculated using timer frequency.. 108.00 BogoMIPS (lpj=216000)
[ 0.000488] pid_max: default: 32768 minimum: 301
[ 0.000616] LSM: initializing lsm=capability,integrity
[ 0.000819] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.000862] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes, linear)
[ 0.002049] cgroup: Disabling memory control group subsystem
[ 0.004306] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.004464] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.004617] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.004990] rcu: Hierarchical SRCU implementation.
[ 0.005002] rcu: Max phase no-delay instances is 1000.
[ 0.006163] EFI services will not be available.
[ 0.006622] smp: Bringing up secondary CPUs ...
[ 0.007468] Detected PIPT I-cache on CPU1
[ 0.007595] CPU1: Booted secondary processor 0x0000000001 [0x410fd083]
[ 0.008604] Detected PIPT I-cache on CPU2
[ 0.008694] CPU2: Booted secondary processor 0x0000000002 [0x410fd083]
[ 0.009588] Detected PIPT I-cache on CPU3
[ 0.009681] CPU3: Booted secondary processor 0x0000000003 [0x410fd083]
[ 0.009802] smp: Brought up 1 node, 4 CPUs
[ 0.009824] SMP: Total of 4 processors activated.
[ 0.009836] CPU features: detected: 32-bit EL0 Support
[ 0.009846] CPU features: detected: 32-bit EL1 Support
[ 0.009858] CPU features: detected: CRC32 instructions
[ 0.009985] CPU: All CPU(s) started at EL2
[ 0.010007] alternatives: applying system-wide alternatives
[ 0.011735] devtmpfs: initialized
[ 0.021456] Enabled cp15_barrier support
[ 0.021494] Enabled setend support
[ 0.021682] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[ 0.021716] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.035662] pinctrl core: initialized pinctrl subsystem
[ 0.036877] DMI not present or invalid.
[ 0.037472] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.039971] DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
[ 0.040271] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
[ 0.041030] DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
[ 0.041107] audit: initializing netlink subsys (disabled)
[ 0.041370] audit: type=2000 audit(0.040:1): state=initialized audit_enabled=0 res=1
[ 0.041892] thermal_sys: Registered thermal governor 'step_wise'
[ 0.041971] cpuidle: using governor menu
[ 0.042187] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.042354] ASID allocator initialised with 32768 entries
[ 0.042580] Serial: AMBA PL011 UART driver
[ 0.054106] bcm2835-mbox fe00b880.mailbox: mailbox enabled
[ 0.072218] raspberrypi-firmware soc:firmware: Attached to firmware from 2023-04-25T18:26:03, variant start
[ 0.076235] raspberrypi-firmware soc:firmware: Firmware hash is d7f9c2b4ef7e4a8c0b04374a879ce89d7a948453
[ 0.089697] Modules: 2G module region forced by RANDOMIZE_MODULE_REGION_FULL
[ 0.089717] Modules: 0 pages in range for non-PLT usage
[ 0.089727] Modules: 518016 pages in range for PLT usage
[ 0.097992] bcm2835-dma fe007000.dma: DMA legacy API manager, dmachans=0x1
[ 0.101505] SCSI subsystem initialized
[ 0.101710] usbcore: registered new interface driver usbfs
[ 0.101759] usbcore: registered new interface driver hub
[ 0.101827] usbcore: registered new device driver usb
[ 0.102170] usb_phy_generic phy: dummy supplies not allowed for exclusive requests
[ 0.102476] pps_core: LinuxPPS API ver. 1 registered
[ 0.102489] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.102522] PTP clock support registered
[ 0.103610] vgaarb: loaded
[ 0.104142] clocksource: Switched to clocksource arch_sys_counter
[ 0.104604] VFS: Disk quotas dquot_6.6.0
[ 0.104655] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.104800] FS-Cache: Loaded
[ 0.104956] CacheFiles: Loaded
[ 0.112918] NET: Registered PF_INET protocol family
[ 0.113529] IP idents hash table entries: 32768 (order: 6, 262144 bytes, linear)
[ 0.116365] tcp_listen_portaddr_hash hash table entries: 1024 (order: 2, 16384 bytes, linear)
[ 0.116406] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.116435] TCP established hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.116557] TCP bind hash table entries: 16384 (order: 7, 524288 bytes, linear)
[ 0.117080] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.117746] MPTCP token hash table entries: 2048 (order: 3, 49152 bytes, linear)
[ 0.117865] UDP hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.117910] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes, linear)
[ 0.118119] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.118773] RPC: Registered named UNIX socket transport module.
[ 0.118788] RPC: Registered udp transport module.
[ 0.118797] RPC: Registered tcp transport module.
[ 0.118806] RPC: Registered tcp-with-tls transport module.
[ 0.118815] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.118840] PCI: CLS 0 bytes, default 64
[ 0.119413] kvm [1]: IPA Size Limit: 44 bits
[ 0.120678] kvm [1]: vgic interrupt IRQ9
[ 0.120737] kvm [1]: Hyp mode initialized successfully
[ 1.140967] Initialise system trusted keyrings
[ 1.141417] workingset: timestamp_bits=46 max_order=19 bucket_order=0
[ 1.141554] zbud: loaded
[ 1.142345] NFS: Registering the id_resolver key type
[ 1.142376] Key type id_resolver registered
[ 1.142387] Key type id_legacy registered
[ 1.142417] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[ 1.142430] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
[ 1.143117] Key type asymmetric registered
[ 1.143134] Asymmetric key parser 'x509' registered
[ 1.143203] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 1.143426] io scheduler mq-deadline registered
[ 1.143442] io scheduler kyber registered
[ 1.143486] io scheduler bfq registered
[ 1.144551] irq_brcmstb_l2: registered L2 intc (/soc/interrupt-controller@7ef00100, parent irq: 23)
[ 1.147444] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation.
[ 1.155392] brcm-pcie fd500000.pcie: host bridge /scb/pcie@7d500000 ranges:
[ 1.155427] brcm-pcie fd500000.pcie: No bus range found for /scb/pcie@7d500000, using [bus 00-ff]
[ 1.155501] brcm-pcie fd500000.pcie: MEM 0x0600000000..0x063fffffff -> 0x00c0000000
[ 1.155574] brcm-pcie fd500000.pcie: IB MEM 0x0000000000..0x007fffffff -> 0x0400000000
[ 1.156775] brcm-pcie fd500000.pcie: PCI host bridge to bus 0000:00
[ 1.156796] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.156815] pci_bus 0000:00: root bus resource [mem 0x600000000-0x63fffffff] (bus address [0xc0000000-0xffffffff])
[ 1.156887] pci 0000:00:00.0: [14e4:2711] type 01 class 0x060400
[ 1.157093] pci 0000:00:00.0: PME# supported from D0 D3hot
[ 1.160802] pci 0000:00:00.0: bridge configuration invalid ([bus 00-00]), reconfiguring
[ 1.161017] pci_bus 0000:01: supply vpcie3v3 not found, using dummy regulator
[ 1.161172] pci_bus 0000:01: supply vpcie3v3aux not found, using dummy regulator
[ 1.161254] pci_bus 0000:01: supply vpcie12v not found, using dummy regulator
[ 1.270220] brcm-pcie fd500000.pcie: link up, 5.0 GT/s PCIe x1 (SSC)
[ 1.270307] pci 0000:01:00.0: [15b7:5005] type 00 class 0x010802
[ 1.270374] pci 0000:01:00.0: reg 0x10: [mem 0x00000000-0x00003fff 64bit]
[ 1.270759] pci 0000:01:00.0: 4.000 Gb/s available PCIe bandwidth, limited by 5.0 GT/s PCIe x1 link at 0000:00:00.0 (capable of 15.752 Gb/s with 8.0 GT/s PCIe x2 link)
[ 1.271179] pci_bus 0000:01: busn_res: [bus 01-ff] end is updated to 01
[ 1.271222] pci 0000:00:00.0: BAR 8: assigned [mem 0x600000000-0x6000fffff]
[ 1.271243] pci 0000:01:00.0: BAR 0: assigned [mem 0x600000000-0x600003fff 64bit]
[ 1.271283] pci 0000:00:00.0: PCI bridge to [bus 01]
[ 1.271304] pci 0000:00:00.0: bridge window [mem 0x600000000-0x6000fffff]
[ 1.283080] iproc-rng200 fe104000.rng: hwrng registered
[ 1.283534] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 1.284985] gpiomem-bcm2835 fe200000.gpiomem: Initialised: Registers at 0xfe200000
[ 1.295877] brd: module loaded
[ 1.303118] loop: module loaded
[ 1.303799] Loading iSCSI transport class v2.0-870.
[ 1.305830] nvme nvme0: pci function 0000:01:00.0
[ 1.305866] pci 0000:00:00.0: enabling device (0000 -> 0002)
[ 1.305899] nvme 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.308902] bcmgenet fd580000.ethernet: GENET 5.0 EPHY: 0x0000
[ 1.313794] nvme nvme0: 4/0/0 default/read/poll queues
[ 1.319753] nvme0n1: p1 p2
[ 1.500273] unimac-mdio unimac-mdio.-19: Broadcom UniMAC MDIO bus
[ 1.501342] usbcore: registered new device driver r8152-cfgselector
[ 1.501389] usbcore: registered new interface driver r8152
[ 1.501431] usbcore: registered new interface driver lan78xx
[ 1.501471] usbcore: registered new interface driver smsc95xx
[ 1.501933] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 1.502205] dwc_otg: FIQ enabled
[ 1.502215] dwc_otg: NAK holdoff enabled
[ 1.502224] dwc_otg: FIQ split-transaction FSM enabled
[ 1.502239] Module dwc_common_port init
[ 1.502708] usbcore: registered new interface driver uas
[ 1.502761] usbcore: registered new interface driver usb-storage
[ 1.502972] mousedev: PS/2 mouse device common for all mice
[ 1.508584] sdhci: Secure Digital Host Controller Interface driver
[ 1.508604] sdhci: Copyright(c) Pierre Ossman
[ 1.509157] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.512428] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.512758] hid: raw HID events driver (C) Jiri Kosina
[ 1.512899] usbcore: registered new interface driver usbhid
[ 1.512912] usbhid: USB HID core driver
[ 1.513153] bcm2835_vchiq fe00b840.mailbox: there is not valid maps for state default
[ 1.520669] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 1.521294] NET: Registered PF_PACKET protocol family
[ 1.521395] Key type dns_resolver registered
[ 1.546026] registered taskstats version 1
[ 1.546249] Loading compiled-in X.509 certificates
[ 1.556275] Key type .fscrypt registered
[ 1.556300] Key type fscrypt-provisioning registered
[ 1.564954] uart-pl011 fe201000.serial: there is not valid maps for state default
[ 1.565675] uart-pl011 fe201000.serial: cts_event_workaround enabled
[ 1.566112] fe201000.serial: ttyAMA1 at MMIO 0xfe201000 (irq = 40, base_baud = 0) is a PL011 rev2
[ 1.566407] serial serial0: tty port ttyAMA1 registered
[ 1.569455] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 1.569840] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 1.571042] mmc-bcm2835 fe300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 1.571063] mmc-bcm2835 fe300000.mmcnr: DMA channel allocated
[ 1.600005] of_cfs_init
[ 1.600386] of_cfs_init: OK
[ 1.600837] clk: Disabling unused clocks
[ 1.637446] mmc0: SDHCI controller on fe340000.mmc [fe340000.mmc] using ADMA
[ 1.637764] Waiting for root device PARTUUID=611f461c-02...
[ 1.682514] mmc1: new high speed SDIO card at address 0001
[ 1.754872] mmc0: new ultra high speed DDR50 SDXC card at address aaaa
[ 1.755810] mmcblk0: mmc0:aaaa SL64G 59.5 GiB
[ 1.759973] mmcblk0: p1 p2
[ 1.760571] mmcblk0: mmc0:aaaa SL64G 59.5 GiB (quirks 0x00004000)
[ 1.772398] EXT4-fs (mmcblk0p2): mounted filesystem 2aa5eb08-26a7-434c-a9f9-6ab89ea0f362 ro with ordered data mode. Quota mode: none.
[ 1.772495] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[ 1.777979] devtmpfs: mounted
[ 1.785089] Freeing unused kernel memory: 4608K
[ 1.785300] Run /sbin/init as init process
[ 1.785311] with arguments:
[ 1.785320] /sbin/init
[ 1.785329] splash
[ 1.785338] with environment:
[ 1.785347] HOME=/
[ 1.785356] TERM=linux
[ 2.169731] systemd[1]: System time before build time, advancing clock.
[ 2.351466] NET: Registered PF_INET6 protocol family
[ 2.353144] Segment Routing with IPv6
[ 2.353188] In-situ OAM (IOAM) with IPv6
[ 2.425101] systemd[1]: systemd 247.3-7+deb11u4 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +ZSTD +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=unified)
[ 2.426051] systemd[1]: Detected architecture arm64.
[ 2.431236] systemd[1]: Set hostname to .
[ 3.038910] systemd[1]: /lib/systemd/system/plymouth-start.service:16: Unit configured to use KillMode=none. This is unsafe, as it disables systemd's process lifecycle management for the service. Please update your service to use a safer KillMode=, such as 'mixed' or 'control-group'. Support for KillMode=none is deprecated and will eventually be removed.
[ 3.191403] systemd[1]: Queued start job for default target Graphical Interface.
[ 3.213635] systemd[1]: Created slice system-getty.slice.
[ 3.214883] systemd[1]: Created slice system-modprobe.slice.
[ 3.215727] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.216523] systemd[1]: Created slice User and Session Slice.
[ 3.217000] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.217994] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 3.218401] systemd[1]: Reached target Slices.
[ 3.218539] systemd[1]: Reached target Swap.
[ 3.219464] systemd[1]: Listening on Syslog Socket.
[ 3.220105] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 3.220526] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.221670] systemd[1]: Listening on Journal Audit Socket.
[ 3.222371] systemd[1]: Listening on Journal Socket (/dev/log).
[ 3.223239] systemd[1]: Listening on Journal Socket.
[ 3.227809] systemd[1]: Listening on udev Control Socket.
[ 3.228628] systemd[1]: Listening on udev Kernel Socket.
[ 3.229563] systemd[1]: Condition check resulted in Huge Pages File System being skipped.
[ 3.252616] systemd[1]: Mounting POSIX Message Queue File System...
[ 3.257203] systemd[1]: Mounting RPC Pipe File System...
[ 3.262770] systemd[1]: Mounting Kernel Debug File System...
[ 3.268174] systemd[1]: Mounting Kernel Trace File System...
[ 3.268625] systemd[1]: Condition check resulted in Kernel Module supporting RPCSEC_GSS being skipped.
[ 3.275998] systemd[1]: Starting Restore / save the current clock...
[ 3.284844] systemd[1]: Starting Set the console keyboard layout...
[ 3.289998] systemd[1]: Starting Create list of static device nodes for the current kernel...
[ 3.295310] systemd[1]: Starting Load Kernel Module configfs...
[ 3.301033] systemd[1]: Starting Load Kernel Module drm...
[ 3.306989] systemd[1]: Starting Load Kernel Module fuse...
[ 3.313695] systemd[1]: Condition check resulted in Set Up Additional Binary Formats being skipped.
[ 3.318935] systemd[1]: Starting File System Check on Root Device...
[ 3.328807] systemd[1]: Starting Journal Service...
[ 3.361108] systemd[1]: Starting Load Kernel Modules...
[ 3.366235] systemd[1]: Starting Coldplug All udev Devices...
[ 3.377649] systemd[1]: Mounted POSIX Message Queue File System.
[ 3.378513] systemd[1]: Mounted RPC Pipe File System.
[ 3.379263] systemd[1]: Mounted Kernel Debug File System.
[ 3.379928] systemd[1]: Mounted Kernel Trace File System.
[ 3.381752] systemd[1]: Finished Create list of static device nodes for the current kernel.
[ 3.384300] systemd[1]: modprobe@configfs.service: Succeeded.
[ 3.385578] systemd[1]: Finished Load Kernel Module configfs.
[ 3.408403] systemd[1]: Mounting Kernel Configuration File System...
[ 3.415047] systemd[1]: Started File System Check Daemon to report status.
[ 3.430472] systemd[1]: Finished Restore / save the current clock.
[ 3.433926] fuse: init (API version 7.38)
[ 3.446422] systemd[1]: modprobe@fuse.service: Succeeded.
[ 3.447799] systemd[1]: Finished Load Kernel Module fuse.
[ 3.465068] systemd[1]: Mounting FUSE Control File System...
[ 3.471331] systemd[1]: Mounted Kernel Configuration File System.
[ 3.490792] systemd[1]: Mounted FUSE Control File System.
[ 3.508989] i2c_dev: i2c /dev entries driver
[ 3.518972] systemd[1]: Finished Load Kernel Modules.
[ 3.557277] systemd[1]: Starting Apply Kernel Variables...
[ 3.602470] systemd[1]: modprobe@drm.service: Succeeded.
[ 3.603924] systemd[1]: Finished Load Kernel Module drm.
[ 3.640519] systemd[1]: Finished File System Check on Root Device.
[ 3.642624] systemd[1]: Finished Apply Kernel Variables.
[ 3.647865] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 3.693133] systemd[1]: Started Journal Service.
[ 3.840072] EXT4-fs (mmcblk0p2): re-mounted 2aa5eb08-26a7-434c-a9f9-6ab89ea0f362 r/w. Quota mode: none.
[ 3.917432] systemd-journald[118]: Received client request to flush runtime journal.
[ 3.938277] systemd-journald[118]: File /var/log/journal/e87ef6d23d064c05a952c5b12becb383/system.journal corrupted or uncleanly shut down, renaming and replacing.
[ 4.987185] mc: Linux media interface: v0.10
[ 5.118446] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.120309] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 5.120356] [vc_sm_connected_init]: start
[ 5.124468] [vc_sm_connected_init]: installed successfully
[ 5.205982] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.228630] videodev: Linux video capture interface: v2.00
[ 5.273484] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.312838] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.336593] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.339307] rpivid_hevc: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.345738] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 5.347741] rpivid feb10000.codec: Device registered as /dev/video19
[ 5.348272] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 5.352311] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 5.352749] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 5.352784] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.352805] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.352823] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.352840] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.356641] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 5.357195] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 5.357724] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 5.358122] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 5.358154] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 5.358175] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 5.358192] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 5.358208] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 5.358475] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 5.380194] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 5.403850] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 5.403915] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 5.424797] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 5.424856] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 5.434230] brcmstb-i2c fef04500.i2c: @97500hz registered in polling mode
[ 5.435171] brcmstb-i2c fef09500.i2c: @97500hz registered in polling mode
[ 5.435263] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 5.435309] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 5.449088] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 5.449148] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 5.455926] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 5.455992] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 5.574901] dwc2 fe980000.usb: supply vusb_d not found, using dummy regulator
[ 5.575242] dwc2 fe980000.usb: supply vusb_a not found, using dummy regulator
[ 5.626550] dwc2 fe980000.usb: DWC OTG Controller
[ 5.626624] dwc2 fe980000.usb: new USB bus registered, assigned bus number 1
[ 5.626689] dwc2 fe980000.usb: irq 44, io mem 0xfe980000
[ 5.627041] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.05
[ 5.627063] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 5.627079] usb usb1: Product: DWC OTG Controller
[ 5.627092] usb usb1: Manufacturer: Linux 6.5.5-v8+ dwc2_hsotg
[ 5.627105] usb usb1: SerialNumber: fe980000.usb
[ 5.628398] Bluetooth: Core ver 2.22
[ 5.628498] NET: Registered PF_BLUETOOTH protocol family
[ 5.628511] Bluetooth: HCI device and connection manager initialized
[ 5.628539] Bluetooth: HCI socket layer initialized
[ 5.628557] Bluetooth: L2CAP socket layer initialized
[ 5.628583] Bluetooth: SCO socket layer initialized
[ 5.628780] hub 1-0:1.0: USB hub found
[ 5.628871] hub 1-0:1.0: 1 port detected
[ 5.657180] Bluetooth: HCI UART driver ver 2.3
[ 5.657221] Bluetooth: HCI UART protocol H4 registered
[ 5.657362] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 5.669078] Bluetooth: HCI UART protocol Broadcom registered
[ 5.670762] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 5.671164] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 5.759437] [drm] Initialized v3d 1.0.0 20180419 for fec00000.v3d on minor 0
[ 5.788659] uart-pl011 fe201000.serial: no DMA platform data
[ 5.928273] usb 1-1: new high-speed USB device number 2 using dwc2
[ 6.033634] Bluetooth: hci0: BCM: chip id 107
[ 6.034064] Bluetooth: hci0: BCM: features 0x2f
[ 6.035283] Bluetooth: hci0: BCM4345C0
[ 6.035315] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0000
[ 6.058552] Bluetooth: hci0: BCM4345C0 'brcm/BCM4345C0.hcd' Patch
[ 6.121679] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 6.135578] vc4-drm gpu: bound fe400000.hvs (ops vc4_hvs_ops [vc4])
[ 6.136771] usb 1-1: New USB device found, idVendor=1a40, idProduct=0101, bcdDevice= 1.11
[ 6.136811] usb 1-1: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 6.136828] usb 1-1: Product: USB 2.0 Hub
[ 6.137776] hub 1-1:1.0: USB hub found
[ 6.137898] hub 1-1:1.0: 4 ports detected
[ 6.194949] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 6.197396] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 6.198435] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 6.219675] Registered IR keymap rc-cec
[ 6.219881] rc rc0: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0
[ 6.220088] input: vc4-hdmi-0 as /devices/platform/soc/fef00700.hdmi/rc/rc0/input0
[ 6.279608] vc4-drm gpu: bound fef00700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.309295] Registered IR keymap rc-cec
[ 6.309511] rc rc1: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1
[ 6.309726] input: vc4-hdmi-1 as /devices/platform/soc/fef05700.hdmi/rc/rc1/input1
[ 6.326926] vc4-drm gpu: bound fef05700.hdmi (ops vc4_hdmi_ops [vc4])
[ 6.327533] vc4-drm gpu: bound fe004000.txp (ops vc4_txp_ops [vc4])
[ 6.328058] vc4-drm gpu: bound fe206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.334011] vc4-drm gpu: bound fe207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.339832] vc4-drm gpu: bound fe20a000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.343340] vc4-drm gpu: bound fe216000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.343879] vc4-drm gpu: bound fec12000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 6.390654] [drm] Initialized vc4 0.0.0 20140616 for gpu on minor 1
[ 6.391179] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 6.417385] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 6.417973] vc4-drm gpu: [drm] Cannot find any crtc or sizes
[ 6.541813] brcmfmac: F1 signature read @0x18000000=0x15264345
[ 6.561027] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43455-sdio for chip BCM4345/6
[ 6.561987] usbcore: registered new interface driver brcmfmac
[ 6.870096] Bluetooth: hci0: BCM: features 0x2f
[ 6.871745] Bluetooth: hci0: BCM43455 37.4MHz Raspberry Pi 3+-0190
[ 6.871788] Bluetooth: hci0: BCM4345C0 (003.001.025) build 0382
[ 6.879409] panel-mipi-dbi-spi spi0.0: supply power not found, using dummy regulator
[ 6.879798] panel-mipi-dbi-spi spi0.0: supply io not found, using dummy regulator
[ 6.880314] brcmfmac_wcc: brcmf_wcc_attach: executing
[ 6.892458] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 6.893196] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/6 wl0: Nov 1 2021 00:37:25 version 7.45.241 (1a2f2fa CY) FWID 01-703fd60
[ 6.946324] [drm] Initialized panel-mipi-dbi 1.0.0 20220103 for spi0.0 on minor 2
[ 7.442438] alsactl[400]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 7.685308] Console: switching to colour frame buffer device 30x30
[ 7.743487] panel-mipi-dbi-spi spi0.0: [drm] fb0: panel-mipi-dbid frame buffer device
[ 7.879024] Adding 102396k swap on /var/swap. Priority:-2 extents:10 across:405500k SSFS
[ 8.383453] 8021q: 802.1Q VLAN Support v1.8
[ 8.977439] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save enabled
[ 9.182727] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 9.182763] Bluetooth: BNEP filters: protocol multicast
[ 9.182793] Bluetooth: BNEP socket layer initialized
[ 9.196655] Bluetooth: MGMT ver 1.22
[ 9.242897] NET: Registered PF_ALG protocol family
[ 9.243457] bcmgenet fd580000.ethernet: configuring instance for external RGMII (RX delay)
[ 9.249965] bcmgenet fd580000.ethernet eth0: Link is Down
[ 13.322035] Bluetooth: RFCOMM TTY layer initialized
[ 13.322066] Bluetooth: RFCOMM socket layer initialized
[ 13.322084] Bluetooth: RFCOMM ver 1.11
[ 16.305616] ICMPv6: process `dhcpcd' is using deprecated sysctl (syscall) net.ipv6.neigh.wlan0.retrans_time - use net.ipv6.neigh.wlan0.retrans_time_ms instead
Additional context
data from config.txt
Enable DRM VC4 V3D driver
dtoverlay=vc4-kms-v3d
max_framebuffers=2
Run in 64-bit mode
arm_64bit=1
Disable compensation for displays with overscan
disable_overscan=1
[cm4]
dtparam=ant2
dtoverlay=dwc2,dr_mode=host
arm_freq=2200
[all]
[pi4]
Run as fast as firmware / board allows
arm_boost=1
[all]
dtoverlay=mipi-dbi-spi,spi0-0,speed=48000000
dtparam=write-only,cpha,cpol
dtparam=width=240,height=240,width-mm=23,height-mm=23
dtparam=reset-gpio=27,dc-gpio=25,backlight-gpio=24