Sample Skill to interact with the BlueNRG Mesh
The binaries are provided in .bin format and can be flashed into the SoC/micro-controller flash memory using one of the procedures described below.
- Procedure 1 (.bin only) -
1 - Plug the Eval Board to the host PC using a micro-USB cable. The board will be recognized as an external memory device called "BLUENRG-2". 2 - Drag and drop or copy the binary file into the "BLUENRG-2(IDB008VX)" device you see in Computer. 3 - Wait until flashing is complete.
- Procedure 2 (.bin) -
1 - Install BlueNRG-1 ST-Link Utility http://www.st.com/en/embedded-software/stsw-bnrg1stlink.html 2 - Plug the Eval Board to the host PC using a micro USB cable. 3 - Open the BlueNRG-1 ST-Link utility. 4 - Connect to the board selecting "Target -> Connect" from the menu or pressing the corresponding button. 5 - Open the binary file selecting "File -> Open File..." and choose the one you want to flash. 6 - From the menu choose: "Target -> Program" 7 - Click Start. 8 - Wait until flashing is complete.