Matek f722 wpx
Rotorflight Wiki is replaced by www.rotorflight.org.
The Matek F722 WPX is an F722 based FC that runs on 2S to 6S. It is a wing type FC usually used for fixed wing aircraft. It has 2 motor outputs designed for individual external ESC's. This controller has 2 onboard BEC's for onboard power as well as a select-able 5-6V 5A for powering the servos. This makes it ideal for 450 sized helicopters and above.
The F722-WPX uses the MTKS-MATEKF722WPX custom defaults. These are located in the custom defaults repository. Select MTKS-MATEKF722WPX from the dropdown before flashing rotorflight. After loading "load custom defaults" to configure your hardware (e.g. Servo pins, motor pins, timers, DMA etc).
There is only one layout required for this board as the tail motor and tail servo are assigned to different pins.
Matek F722 WPX Examples
. The configuration Diff file for this helicopter is located in the Examples repository.
- Overview
- Back-up and restore
- Servo Wiring and adapter boards
- Custom Defaults
- Custom defaults remapping spreadsheet
- Receiver Setup
- Gyro & Board Orientation
- Voltage & Current Sensors
- ESC Setup
- Motor Setup
- Servos Setup
- Mixer
- Modes
- RPM Filters
- Filter Setup
- Governor Setup
- Adjustments
- Introduction
- Initial Tuning
- Governor Tuning
- Feed forward Tuning
- Tail Tuning
- Tuning on the Field with Lua Scripts
- Blackbox Logging
- Working with Blackbox Explorer
- K110 with Play F4
- Profile (Bank) switching example
- Using stability modes (6G)
- Adding OSD support for FPV Setups