ARM: config: aspeed-g5: Add device mapper support #2

anoo1 · 2019-06-12T17:07:55Z

Swift will be using lvm2 for volume management which requires
the device mapper driver.

Signed-off-by: Adriana Kobylak anoo@us.ibm.com

Swift will be using lvm2 for volume management which requires this device mapper driver. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>

…text commit 0c9e8b3 upstream. stub_probe() and stub_disconnect() call functions which could call sleeping function in invalid context whil holding busid_lock. Fix the problem by refining the lock holds to short critical sections to change the busid_priv fields. This fix restructures the code to limit the lock holds in stub_probe() and stub_disconnect(). stub_probe(): [15217.927028] BUG: sleeping function called from invalid context at mm/slab.h:418 [15217.927038] in_atomic(): 1, irqs_disabled(): 0, pid: 29087, name: usbip [15217.927044] 5 locks held by usbip/29087: [15217.927047] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15217.927062] #1: 000000008f9ba75b (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15217.927072] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15217.927082] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15217.927090] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15217.927103] CPU: 3 PID: 29087 Comm: usbip Tainted: G W 5.1.0-rc6+ torvalds#40 [15217.927106] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15217.927109] Call Trace: [15217.927118] dump_stack+0x63/0x85 [15217.927127] ___might_sleep+0xff/0x120 [15217.927133] __might_sleep+0x4a/0x80 [15217.927143] kmem_cache_alloc_trace+0x1aa/0x210 [15217.927156] stub_probe+0xe8/0x440 [usbip_host] [15217.927171] usb_probe_device+0x34/0x70 stub_disconnect(): [15279.182478] BUG: sleeping function called from invalid context at kernel/locking/mutex.c:908 [15279.182487] in_atomic(): 1, irqs_disabled(): 0, pid: 29114, name: usbip [15279.182492] 5 locks held by usbip/29114: [15279.182494] #0: 0000000091647f28 (sb_writers#6){....}, at: vfs_write+0x191/0x1c0 [15279.182506] #1: 00000000702cf0f3 (&of->mutex){....}, at: kernfs_fop_write+0xf7/0x1b0 [15279.182514] #2: 00000000872e5b4b (&dev->mutex){....}, at: __device_driver_lock+0x3b/0x50 [15279.182522] #3: 00000000e74ececc (&dev->mutex){....}, at: __device_driver_lock+0x46/0x50 [15279.182529] #4: 00000000b20abbe0 (&(&busid_table[i].busid_lock)->rlock){....}, at: get_busid_priv+0x48/0x60 [usbip_host] [15279.182541] CPU: 0 PID: 29114 Comm: usbip Tainted: G W 5.1.0-rc6+ torvalds#40 [15279.182543] Hardware name: Dell Inc. OptiPlex 790/0HY9JP, BIOS A18 09/24/2013 [15279.182546] Call Trace: [15279.182554] dump_stack+0x63/0x85 [15279.182561] ___might_sleep+0xff/0x120 [15279.182566] __might_sleep+0x4a/0x80 [15279.182574] __mutex_lock+0x55/0x950 [15279.182582] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182587] ? reacquire_held_locks+0xec/0x1a0 [15279.182591] ? get_busid_priv+0x48/0x60 [usbip_host] [15279.182597] ? find_held_lock+0x94/0xa0 [15279.182609] mutex_lock_nested+0x1b/0x20 [15279.182614] ? mutex_lock_nested+0x1b/0x20 [15279.182618] kernfs_remove_by_name_ns+0x2a/0x90 [15279.182625] sysfs_remove_file_ns+0x15/0x20 [15279.182629] device_remove_file+0x19/0x20 [15279.182634] stub_disconnect+0x6d/0x180 [usbip_host] [15279.182643] usb_unbind_device+0x27/0x60 Signed-off-by: Shuah Khan <skhan@linuxfoundation.org> Cc: stable <stable@vger.kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

… sdevs) commit ef4021f upstream. When the user tries to remove a zfcp port via sysfs, we only rejected it if there are zfcp unit children under the port. With purely automatically scanned LUNs there are no zfcp units but only SCSI devices. In such cases, the port_remove erroneously continued. We close the port and this implicitly closes all LUNs under the port. The SCSI devices survive with their private zfcp_scsi_dev still holding a reference to the "removed" zfcp_port (still allocated but invisible in sysfs) [zfcp_get_port_by_wwpn in zfcp_scsi_slave_alloc]. This is not a problem as long as the fc_rport stays blocked. Once (auto) port scan brings back the removed port, we unblock its fc_rport again by design. However, there is no mechanism that would recover (open) the LUNs under the port (no "ersfs_3" without zfcp_unit [zfcp_erp_strategy_followup_success]). Any pending or new I/O to such LUN leads to repeated: Done: NEEDS_RETRY Result: hostbyte=DID_IMM_RETRY driverbyte=DRIVER_OK See also v4.10 commit 6f2ce1c ("scsi: zfcp: fix rport unblock race with LUN recovery"). Even a manual LUN recovery (echo 0 > /sys/bus/scsi/devices/H:C:T:L/zfcp_failed) does not help, as the LUN links to the old "removed" port which remains to lack ZFCP_STATUS_COMMON_RUNNING [zfcp_erp_required_act]. The only workaround is to first ensure that the fc_rport is blocked (e.g. port_remove again in case it was re-discovered by (auto) port scan), then delete the SCSI devices, and finally re-discover by (auto) port scan. The port scan includes an fc_rport unblock, which in turn triggers a new scan on the scsi target to freshly get new pure auto scan LUNs. Fix this by rejecting port_remove also if there are SCSI devices (even without any zfcp_unit) under this port. Re-use mechanics from v3.7 commit d99b601 ("[SCSI] zfcp: restore refcount check on port_remove"). However, we have to give up zfcp_sysfs_port_units_mutex earlier in unit_add to prevent a deadlock with scsi_host scan taking shost->scan_mutex first and then zfcp_sysfs_port_units_mutex now in our zfcp_scsi_slave_alloc(). Signed-off-by: Steffen Maier <maier@linux.ibm.com> Fixes: b62a8d9 ("[SCSI] zfcp: Use SCSI device data zfcp scsi dev instead of zfcp unit") Fixes: f8210e3 ("[SCSI] zfcp: Allow midlayer to scan for LUNs when running in NPIV mode") Cc: <stable@vger.kernel.org> #2.6.37+ Reviewed-by: Benjamin Block <bblock@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Booting with kernel parameter "rdt=cmt,mbmtotal,memlocal,l3cat,mba" and executing "mount -t resctrl resctrl -o mba_MBps /sys/fs/resctrl" results in a NULL pointer dereference on systems which do not have local MBM support enabled.. BUG: kernel NULL pointer dereference, address: 0000000000000020 PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 722 Comm: kworker/0:3 Not tainted 5.2.0-0.rc3.git0.1.el7_UNSUPPORTED.x86_64 #2 Workqueue: events mbm_handle_overflow RIP: 0010:mbm_handle_overflow+0x150/0x2b0 Only enter the bandwith update loop if the system has local MBM enabled. Fixes: de73f38 ("x86/intel_rdt/mba_sc: Feedback loop to dynamically update mem bandwidth") Signed-off-by: Prarit Bhargava <prarit@redhat.com> Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Fenghua Yu <fenghua.yu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Borislav Petkov <bp@alien8.de> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: stable@vger.kernel.org Link: https://lkml.kernel.org/r/20190610171544.13474-1-prarit@redhat.com

Ido Schimmel says: ==================== mlxsw: Various fixes This patchset contains various fixes for mlxsw. Patch #1 fixes an hash polarization problem when a nexthop device is a LAG device. This is caused by the fact that the same seed is used for the LAG and ECMP hash functions. Patch #2 fixes an issue in which the driver fails to refresh a nexthop neighbour after it becomes dead. This prevents the nexthop from ever being written to the adjacency table and used to forward traffic. Patch Patch #4 fixes a wrong extraction of TOS value in flower offload code. Patch #5 is a test case. Patch torvalds#6 works around a buffer issue in Spectrum-2 by reducing the default sizes of the shared buffer pools. Patch torvalds#7 prevents prio-tagged packets from entering the switch when PVID is removed from the bridge port. Please consider patches #2, #4 and torvalds#6 for 5.1.y ==================== Signed-off-by: David S. Miller <davem@davemloft.net>

…nux/kernel/git/kvmarm/kvmarm into HEAD KVM/arm fixes for 5.2, take #2 - SVE cleanup killing a warning with ancient GCC versions - Don't report non-existent system registers to userspace - Fix memory leak when freeing the vgic ITS - Properly lower the interrupt on the emulated physical timer

commit c952b35 upstream. bpf/btf write_* functions need ff->ph->env. With this missing, pipe-mode (perf record -o -) would crash like: Program terminated with signal SIGSEGV, Segmentation fault. This patch assign proper ph value to ff. Committer testing: (gdb) run record -o - Starting program: /root/bin/perf record -o - PERFILE2 <SNIP start of perf.data headers> Thread 1 "perf" received signal SIGSEGV, Segmentation fault. __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126 126 memcpy(ff->buf + ff->offset, buf, size); (gdb) bt #0 __do_write_buf (size=4, buf=0x160, ff=0x7fffffff8f80) at util/header.c:126 #1 do_write (ff=ff@entry=0x7fffffff8f80, buf=buf@entry=0x160, size=4) at util/header.c:137 #2 0x00000000004eddba in write_bpf_prog_info (ff=0x7fffffff8f80, evlist=<optimized out>) at util/header.c:912 #3 0x00000000004f69d7 in perf_event__synthesize_features (tool=tool@entry=0x97cc00 <record>, session=session@entry=0x7fffe9c6d010, evlist=0x7fffe9cae010, process=process@entry=0x4435d0 <process_synthesized_event>) at util/header.c:3695 #4 0x0000000000443c79 in record__synthesize (tail=tail@entry=false, rec=0x97cc00 <record>) at builtin-record.c:1214 #5 0x0000000000444ec9 in __cmd_record (rec=0x97cc00 <record>, argv=<optimized out>, argc=0) at builtin-record.c:1435 torvalds#6 cmd_record (argc=0, argv=<optimized out>) at builtin-record.c:2450 torvalds#7 0x00000000004ae3e9 in run_builtin (p=p@entry=0x98e058 <commands+216>, argc=argc@entry=3, argv=0x7fffffffd670) at perf.c:304 torvalds#8 0x000000000042eded in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:356 torvalds#9 run_argv (argcp=<optimized out>, argv=<optimized out>) at perf.c:400 torvalds#10 main (argc=3, argv=<optimized out>) at perf.c:522 (gdb) After the patch the SEGSEGV is gone. Reported-by: David Carrillo Cisneros <davidca@fb.com> Signed-off-by: Song Liu <songliubraving@fb.com> Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: kernel-team@fb.com Cc: stable@vger.kernel.org # v5.1+ Fixes: 606f972 ("perf bpf: Save bpf_prog_info information as headers to perf.data") Link: http://lkml.kernel.org/r/20190620010453.4118689-1-songliubraving@fb.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 6da9f77 ] When debugging options are turned on, the rcu_read_lock() function might not be inlined. This results in lockdep's print_lock() function printing "rcu_read_lock+0x0/0x70" instead of rcu_read_lock()'s caller. For example: [ 10.579995] ============================= [ 10.584033] WARNING: suspicious RCU usage [ 10.588074] 4.18.0.memcg_v2+ #1 Not tainted [ 10.593162] ----------------------------- [ 10.597203] include/linux/rcupdate.h:281 Illegal context switch in RCU read-side critical section! [ 10.606220] [ 10.606220] other info that might help us debug this: [ 10.606220] [ 10.614280] [ 10.614280] rcu_scheduler_active = 2, debug_locks = 1 [ 10.620853] 3 locks held by systemd/1: [ 10.624632] #0: (____ptrval____) (&type->i_mutex_dir_key#5){.+.+}, at: lookup_slow+0x42/0x70 [ 10.633232] #1: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70 [ 10.640954] #2: (____ptrval____) (rcu_read_lock){....}, at: rcu_read_lock+0x0/0x70 These "rcu_read_lock+0x0/0x70" strings are not providing any useful information. This commit therefore forces inlining of the rcu_read_lock() function so that rcu_read_lock()'s caller is instead shown. Signed-off-by: Waiman Long <longman@redhat.com> Signed-off-by: Paul E. McKenney <paulmck@linux.ibm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 80265d8 ] When enable lockdep engine, a lockdep warning can be observed when reboot or shutdown system, [ 3142.764557][ T1] bcache: bcache_reboot() Stopping all devices: [ 3142.776265][ T2649] [ 3142.777159][ T2649] ====================================================== [ 3142.780039][ T2649] WARNING: possible circular locking dependency detected [ 3142.782869][ T2649] 5.2.0-rc4-lp151.20-default+ #1 Tainted: G W [ 3142.785684][ T2649] ------------------------------------------------------ [ 3142.788479][ T2649] kworker/3:67/2649 is trying to acquire lock: [ 3142.790738][ T2649] 00000000aaf02291 ((wq_completion)bcache_writeback_wq){+.+.}, at: flush_workqueue+0x87/0x4c0 [ 3142.794678][ T2649] [ 3142.794678][ T2649] but task is already holding lock: [ 3142.797402][ T2649] 000000004fcf89c5 (&bch_register_lock){+.+.}, at: cached_dev_free+0x17/0x120 [bcache] [ 3142.801462][ T2649] [ 3142.801462][ T2649] which lock already depends on the new lock. [ 3142.801462][ T2649] [ 3142.805277][ T2649] [ 3142.805277][ T2649] the existing dependency chain (in reverse order) is: [ 3142.808902][ T2649] [ 3142.808902][ T2649] -> #2 (&bch_register_lock){+.+.}: [ 3142.812396][ T2649] __mutex_lock+0x7a/0x9d0 [ 3142.814184][ T2649] cached_dev_free+0x17/0x120 [bcache] [ 3142.816415][ T2649] process_one_work+0x2a4/0x640 [ 3142.818413][ T2649] worker_thread+0x39/0x3f0 [ 3142.820276][ T2649] kthread+0x125/0x140 [ 3142.822061][ T2649] ret_from_fork+0x3a/0x50 [ 3142.823965][ T2649] [ 3142.823965][ T2649] -> #1 ((work_completion)(&cl->work)#2){+.+.}: [ 3142.827244][ T2649] process_one_work+0x277/0x640 [ 3142.829160][ T2649] worker_thread+0x39/0x3f0 [ 3142.830958][ T2649] kthread+0x125/0x140 [ 3142.832674][ T2649] ret_from_fork+0x3a/0x50 [ 3142.834915][ T2649] [ 3142.834915][ T2649] -> #0 ((wq_completion)bcache_writeback_wq){+.+.}: [ 3142.838121][ T2649] lock_acquire+0xb4/0x1c0 [ 3142.840025][ T2649] flush_workqueue+0xae/0x4c0 [ 3142.842035][ T2649] drain_workqueue+0xa9/0x180 [ 3142.844042][ T2649] destroy_workqueue+0x17/0x250 [ 3142.846142][ T2649] cached_dev_free+0x52/0x120 [bcache] [ 3142.848530][ T2649] process_one_work+0x2a4/0x640 [ 3142.850663][ T2649] worker_thread+0x39/0x3f0 [ 3142.852464][ T2649] kthread+0x125/0x140 [ 3142.854106][ T2649] ret_from_fork+0x3a/0x50 [ 3142.855880][ T2649] [ 3142.855880][ T2649] other info that might help us debug this: [ 3142.855880][ T2649] [ 3142.859663][ T2649] Chain exists of: [ 3142.859663][ T2649] (wq_completion)bcache_writeback_wq --> (work_completion)(&cl->work)#2 --> &bch_register_lock [ 3142.859663][ T2649] [ 3142.865424][ T2649] Possible unsafe locking scenario: [ 3142.865424][ T2649] [ 3142.868022][ T2649] CPU0 CPU1 [ 3142.869885][ T2649] ---- ---- [ 3142.871751][ T2649] lock(&bch_register_lock); [ 3142.873379][ T2649] lock((work_completion)(&cl->work)#2); [ 3142.876399][ T2649] lock(&bch_register_lock); [ 3142.879727][ T2649] lock((wq_completion)bcache_writeback_wq); [ 3142.882064][ T2649] [ 3142.882064][ T2649] *** DEADLOCK *** [ 3142.882064][ T2649] [ 3142.885060][ T2649] 3 locks held by kworker/3:67/2649: [ 3142.887245][ T2649] #0: 00000000e774cdd0 ((wq_completion)events){+.+.}, at: process_one_work+0x21e/0x640 [ 3142.890815][ T2649] #1: 00000000f7df89da ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640 [ 3142.894884][ T2649] #2: 000000004fcf89c5 (&bch_register_lock){+.+.}, at: cached_dev_free+0x17/0x120 [bcache] [ 3142.898797][ T2649] [ 3142.898797][ T2649] stack backtrace: [ 3142.900961][ T2649] CPU: 3 PID: 2649 Comm: kworker/3:67 Tainted: G W 5.2.0-rc4-lp151.20-default+ #1 [ 3142.904789][ T2649] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 [ 3142.909168][ T2649] Workqueue: events cached_dev_free [bcache] [ 3142.911422][ T2649] Call Trace: [ 3142.912656][ T2649] dump_stack+0x85/0xcb [ 3142.914181][ T2649] print_circular_bug+0x19a/0x1f0 [ 3142.916193][ T2649] __lock_acquire+0x16cd/0x1850 [ 3142.917936][ T2649] ? __lock_acquire+0x6a8/0x1850 [ 3142.919704][ T2649] ? lock_acquire+0xb4/0x1c0 [ 3142.921335][ T2649] ? find_held_lock+0x34/0xa0 [ 3142.923052][ T2649] lock_acquire+0xb4/0x1c0 [ 3142.924635][ T2649] ? flush_workqueue+0x87/0x4c0 [ 3142.926375][ T2649] flush_workqueue+0xae/0x4c0 [ 3142.928047][ T2649] ? flush_workqueue+0x87/0x4c0 [ 3142.929824][ T2649] ? drain_workqueue+0xa9/0x180 [ 3142.931686][ T2649] drain_workqueue+0xa9/0x180 [ 3142.933534][ T2649] destroy_workqueue+0x17/0x250 [ 3142.935787][ T2649] cached_dev_free+0x52/0x120 [bcache] [ 3142.937795][ T2649] process_one_work+0x2a4/0x640 [ 3142.939803][ T2649] worker_thread+0x39/0x3f0 [ 3142.941487][ T2649] ? process_one_work+0x640/0x640 [ 3142.943389][ T2649] kthread+0x125/0x140 [ 3142.944894][ T2649] ? kthread_create_worker_on_cpu+0x70/0x70 [ 3142.947744][ T2649] ret_from_fork+0x3a/0x50 [ 3142.970358][ T2649] bcache: bcache_device_free() bcache0 stopped Here is how the deadlock happens. 1) bcache_reboot() calls bcache_device_stop(), then inside bcache_device_stop() BCACHE_DEV_CLOSING bit is set on d->flags. Then closure_queue(&d->cl) is called to invoke cached_dev_flush(). 2) In cached_dev_flush(), cached_dev_free() is called by continu_at(). 3) In cached_dev_free(), when stopping the writeback kthread of the cached device by kthread_stop(), dc->writeback_thread will be waken up to quite the kthread while-loop, then cached_dev_put() is called in bch_writeback_thread(). 4) Calling cached_dev_put() in writeback kthread may drop dc->count to 0, then dc->detach kworker is scheduled, which is initialized as cached_dev_detach_finish(). 5) Inside cached_dev_detach_finish(), the last line of code is to call closure_put(&dc->disk.cl), which drops the last reference counter of closrure dc->disk.cl, then the callback cached_dev_flush() gets called. Now cached_dev_flush() is called for second time in the code path, the first time is in step 2). And again bch_register_lock will be acquired again, and a A-A lock (lockdep terminology) is happening. The root cause of the above A-A lock is in cached_dev_free(), mutex bch_register_lock is held before stopping writeback kthread and other kworkers. Fortunately now we have variable 'bcache_is_reboot', which may prevent device registration or unregistration during reboot/shutdown time, so it is unncessary to hold bch_register_lock such early now. This is how this patch fixes the reboot/shutdown time A-A lock issue: After moving mutex_lock(&bch_register_lock) to a later location where before atomic_read(&dc->running) in cached_dev_free(), such A-A lock problem can be solved without any reboot time registration race. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 7e865eb ] When enable lockdep and reboot system with a writeback mode bcache device, the following potential deadlock warning is reported by lockdep engine. [ 101.536569][ T401] kworker/2:2/401 is trying to acquire lock: [ 101.538575][ T401] 00000000bbf6e6c7 ((wq_completion)bcache_writeback_wq){+.+.}, at: flush_workqueue+0x87/0x4c0 [ 101.542054][ T401] [ 101.542054][ T401] but task is already holding lock: [ 101.544587][ T401] 00000000f5f305b3 ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640 [ 101.548386][ T401] [ 101.548386][ T401] which lock already depends on the new lock. [ 101.548386][ T401] [ 101.551874][ T401] [ 101.551874][ T401] the existing dependency chain (in reverse order) is: [ 101.555000][ T401] [ 101.555000][ T401] -> #1 ((work_completion)(&cl->work)#2){+.+.}: [ 101.557860][ T401] process_one_work+0x277/0x640 [ 101.559661][ T401] worker_thread+0x39/0x3f0 [ 101.561340][ T401] kthread+0x125/0x140 [ 101.562963][ T401] ret_from_fork+0x3a/0x50 [ 101.564718][ T401] [ 101.564718][ T401] -> #0 ((wq_completion)bcache_writeback_wq){+.+.}: [ 101.567701][ T401] lock_acquire+0xb4/0x1c0 [ 101.569651][ T401] flush_workqueue+0xae/0x4c0 [ 101.571494][ T401] drain_workqueue+0xa9/0x180 [ 101.573234][ T401] destroy_workqueue+0x17/0x250 [ 101.575109][ T401] cached_dev_free+0x44/0x120 [bcache] [ 101.577304][ T401] process_one_work+0x2a4/0x640 [ 101.579357][ T401] worker_thread+0x39/0x3f0 [ 101.581055][ T401] kthread+0x125/0x140 [ 101.582709][ T401] ret_from_fork+0x3a/0x50 [ 101.584592][ T401] [ 101.584592][ T401] other info that might help us debug this: [ 101.584592][ T401] [ 101.588355][ T401] Possible unsafe locking scenario: [ 101.588355][ T401] [ 101.590974][ T401] CPU0 CPU1 [ 101.592889][ T401] ---- ---- [ 101.594743][ T401] lock((work_completion)(&cl->work)#2); [ 101.596785][ T401] lock((wq_completion)bcache_writeback_wq); [ 101.600072][ T401] lock((work_completion)(&cl->work)#2); [ 101.602971][ T401] lock((wq_completion)bcache_writeback_wq); [ 101.605255][ T401] [ 101.605255][ T401] *** DEADLOCK *** [ 101.605255][ T401] [ 101.608310][ T401] 2 locks held by kworker/2:2/401: [ 101.610208][ T401] #0: 00000000cf2c7d17 ((wq_completion)events){+.+.}, at: process_one_work+0x21e/0x640 [ 101.613709][ T401] #1: 00000000f5f305b3 ((work_completion)(&cl->work)#2){+.+.}, at: process_one_work+0x21e/0x640 [ 101.617480][ T401] [ 101.617480][ T401] stack backtrace: [ 101.619539][ T401] CPU: 2 PID: 401 Comm: kworker/2:2 Tainted: G W 5.2.0-rc4-lp151.20-default+ #1 [ 101.623225][ T401] Hardware name: VMware, Inc. VMware Virtual Platform/440BX Desktop Reference Platform, BIOS 6.00 04/13/2018 [ 101.627210][ T401] Workqueue: events cached_dev_free [bcache] [ 101.629239][ T401] Call Trace: [ 101.630360][ T401] dump_stack+0x85/0xcb [ 101.631777][ T401] print_circular_bug+0x19a/0x1f0 [ 101.633485][ T401] __lock_acquire+0x16cd/0x1850 [ 101.635184][ T401] ? __lock_acquire+0x6a8/0x1850 [ 101.636863][ T401] ? lock_acquire+0xb4/0x1c0 [ 101.638421][ T401] ? find_held_lock+0x34/0xa0 [ 101.640015][ T401] lock_acquire+0xb4/0x1c0 [ 101.641513][ T401] ? flush_workqueue+0x87/0x4c0 [ 101.643248][ T401] flush_workqueue+0xae/0x4c0 [ 101.644832][ T401] ? flush_workqueue+0x87/0x4c0 [ 101.646476][ T401] ? drain_workqueue+0xa9/0x180 [ 101.648303][ T401] drain_workqueue+0xa9/0x180 [ 101.649867][ T401] destroy_workqueue+0x17/0x250 [ 101.651503][ T401] cached_dev_free+0x44/0x120 [bcache] [ 101.653328][ T401] process_one_work+0x2a4/0x640 [ 101.655029][ T401] worker_thread+0x39/0x3f0 [ 101.656693][ T401] ? process_one_work+0x640/0x640 [ 101.658501][ T401] kthread+0x125/0x140 [ 101.660012][ T401] ? kthread_create_worker_on_cpu+0x70/0x70 [ 101.661985][ T401] ret_from_fork+0x3a/0x50 [ 101.691318][ T401] bcache: bcache_device_free() bcache0 stopped Here is how the above potential deadlock may happen in reboot/shutdown code path, 1) bcache_reboot() is called firstly in the reboot/shutdown code path, then in bcache_reboot(), bcache_device_stop() is called. 2) bcache_device_stop() sets BCACHE_DEV_CLOSING on d->falgs, then call closure_queue(&d->cl) to invoke cached_dev_flush(). And in turn cached_dev_flush() calls cached_dev_free() via closure_at() 3) In cached_dev_free(), after stopped writebach kthread dc->writeback_thread, the kwork dc->writeback_write_wq is stopping by destroy_workqueue(). 4) Inside destroy_workqueue(), drain_workqueue() is called. Inside drain_workqueue(), flush_workqueue() is called. Then wq->lockdep_map is acquired by lock_map_acquire() in flush_workqueue(). After the lock acquired the rest part of flush_workqueue() just wait for the workqueue to complete. 5) Now we look back at writeback thread routine bch_writeback_thread(), in the main while-loop, write_dirty() is called via continue_at() in read_dirty_submit(), which is called via continue_at() in while-loop level called function read_dirty(). Inside write_dirty() it may be re-called on workqueeu dc->writeback_write_wq via continue_at(). It means when the writeback kthread is stopped in cached_dev_free() there might be still one kworker queued on dc->writeback_write_wq to execute write_dirty() again. 6) Now this kworker is scheduled on dc->writeback_write_wq to run by process_one_work() (which is called by worker_thread()). Before calling the kwork routine, wq->lockdep_map is acquired. 7) But wq->lockdep_map is acquired already in step 4), so a A-A lock (lockdep terminology) scenario happens. Indeed on multiple cores syatem, the above deadlock is very rare to happen, just as the code comments in process_one_work() says, 2263 * AFAICT there is no possible deadlock scenario between the 2264 * flush_work() and complete() primitives (except for single-threaded 2265 * workqueues), so hiding them isn't a problem. But it is still good to fix such lockdep warning, even no one running bcache on single core system. The fix is simple. This patch solves the above potential deadlock by, - Do not destroy workqueue dc->writeback_write_wq in cached_dev_free(). - Flush and destroy dc->writeback_write_wq in writebach kthread routine bch_writeback_thread(), where after quit the thread main while-loop and before cached_dev_put() is called. By this fix, dc->writeback_write_wq will be stopped and destroy before the writeback kthread stopped, so the chance for a A-A locking on wq->lockdep_map is disappeared, such A-A deadlock won't happen any more. Signed-off-by: Coly Li <colyli@suse.de> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 3f167e1 ] ipv4_pdp_add() is called in RCU read-side critical section. So GFP_KERNEL should not be used in the function. This patch make ipv4_pdp_add() to use GFP_ATOMIC instead of GFP_KERNEL. Test commands: gtp-link add gtp1 & gtp-tunnel add gtp1 v1 100 200 1.1.1.1 2.2.2.2 Splat looks like: [ 130.618881] ============================= [ 130.626382] WARNING: suspicious RCU usage [ 130.626994] 5.2.0-rc6+ torvalds#50 Not tainted [ 130.627622] ----------------------------- [ 130.628223] ./include/linux/rcupdate.h:266 Illegal context switch in RCU read-side critical section! [ 130.629684] [ 130.629684] other info that might help us debug this: [ 130.629684] [ 130.631022] [ 130.631022] rcu_scheduler_active = 2, debug_locks = 1 [ 130.632136] 4 locks held by gtp-tunnel/1025: [ 130.632925] #0: 000000002b93c8b7 (cb_lock){++++}, at: genl_rcv+0x15/0x40 [ 130.634159] #1: 00000000f17bc999 (genl_mutex){+.+.}, at: genl_rcv_msg+0xfb/0x130 [ 130.635487] #2: 00000000c644ed8e (rtnl_mutex){+.+.}, at: gtp_genl_new_pdp+0x18c/0x1150 [gtp] [ 130.636936] #3: 0000000007a1cde7 (rcu_read_lock){....}, at: gtp_genl_new_pdp+0x187/0x1150 [gtp] [ 130.638348] [ 130.638348] stack backtrace: [ 130.639062] CPU: 1 PID: 1025 Comm: gtp-tunnel Not tainted 5.2.0-rc6+ torvalds#50 [ 130.641318] Call Trace: [ 130.641707] dump_stack+0x7c/0xbb [ 130.642252] ___might_sleep+0x2c0/0x3b0 [ 130.642862] kmem_cache_alloc_trace+0x1cd/0x2b0 [ 130.643591] gtp_genl_new_pdp+0x6c5/0x1150 [gtp] [ 130.644371] genl_family_rcv_msg+0x63a/0x1030 [ 130.645074] ? mutex_lock_io_nested+0x1090/0x1090 [ 130.645845] ? genl_unregister_family+0x630/0x630 [ 130.646592] ? debug_show_all_locks+0x2d0/0x2d0 [ 130.647293] ? check_flags.part.40+0x440/0x440 [ 130.648099] genl_rcv_msg+0xa3/0x130 [ ... ] Fixes: 459aa66 ("gtp: add initial driver for datapath of GPRS Tunneling Protocol (GTP-U)") Signed-off-by: Taehee Yoo <ap420073@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ong traces commit 106d45f upstream. When tracing instances where we open and close WKA ports, we also pass the request-ID of the respective FSF command. But after successfully sending the FSF command we must not use the request-object anymore, as this might result in an use-after-free (see "zfcp: fix request object use-after-free in send path causing seqno errors" ). To fix this add a new variable that caches the request-ID before sending the request. This won't change during the hand-off to the FCP channel, and so it's safe to trace this cached request-ID later, instead of using the request object. Signed-off-by: Benjamin Block <bblock@linux.ibm.com> Fixes: d27a7cb ("zfcp: trace on request for open and close of WKA port") Cc: <stable@vger.kernel.org> #2.6.38+ Reviewed-by: Steffen Maier <maier@linux.ibm.com> Reviewed-by: Jens Remus <jremus@linux.ibm.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 181fa43 ] According to the PCI Local Bus specification Revision 3.0, section 6.8.1.3 (Message Control for MSI), endpoints that are Multiple Message Capable as defined by bits [3:1] in the Message Control for MSI can request a number of vectors that is power of two aligned. As specified in section 6.8.1.6 "Message data for MSI", the Multiple Message Enable field (bits [6:4] of the Message Control register) defines the number of low order message data bits the function is permitted to modify to generate its system software allocated vectors. The MSI controller in the Xilinx NWL PCIe controller supports a number of MSI vectors specified through a bitmap and the hwirq number for an MSI, that is the value written in the MSI data TLP is determined by the bitmap allocation. For instance, in a situation where two endpoints sitting on the PCI bus request the following MSI configuration, with the current PCI Xilinx bitmap allocation code (that does not align MSI vector allocation on a power of two boundary): Endpoint #1: Requesting 1 MSI vector - allocated bitmap bits 0 Endpoint #2: Requesting 2 MSI vectors - allocated bitmap bits [1,2] The bitmap value(s) corresponds to the hwirq number that is programmed into the Message Data for MSI field in the endpoint MSI capability and is detected by the root complex to fire the corresponding MSI irqs. The value written in Message Data for MSI field corresponds to the first bit allocated in the bitmap for Multi MSI vectors. The current Xilinx NWL MSI allocation code allows a bitmap allocation that is not a power of two boundaries, so endpoint #2, is allowed to toggle Message Data bit[0] to differentiate between its two vectors (meaning that the MSI data will be respectively 0x0 and 0x1 for the two vectors allocated to endpoint #2). This clearly aliases with the Endpoint #1 vector allocation, resulting in a broken Multi MSI implementation. Update the code to allocate MSI bitmap ranges with a power of two alignment, fixing the bug. Fixes: ab597d3 ("PCI: xilinx-nwl: Add support for Xilinx NWL PCIe Host Controller") Suggested-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Bharat Kumar Gogada <bharat.kumar.gogada@xilinx.com> [lorenzo.pieralisi@arm.com: updated commit log] Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Acked-by: Marc Zyngier <marc.zyngier@arm.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 80e5302 ] An impending change to enable HAVE_C_RECORDMCOUNT on powerpc leads to warnings such as the following: # modprobe kprobe_example ftrace-powerpc: Not expected bl: opcode is 3c4c0001 WARNING: CPU: 0 PID: 227 at kernel/trace/ftrace.c:2001 ftrace_bug+0x90/0x318 Modules linked in: CPU: 0 PID: 227 Comm: modprobe Not tainted 5.2.0-rc6-00678-g1c329100b942 #2 NIP: c000000000264318 LR: c00000000025d694 CTR: c000000000f5cd30 REGS: c000000001f2b7b0 TRAP: 0700 Not tainted (5.2.0-rc6-00678-g1c329100b942) MSR: 900000010282b033 <SF,HV,VEC,VSX,EE,FP,ME,IR,DR,RI,LE,TM[E]> CR: 28228222 XER: 00000000 CFAR: c0000000002642fc IRQMASK: 0 <snip> NIP [c000000000264318] ftrace_bug+0x90/0x318 LR [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 Call Trace: [c000000001f2ba40] [0000000000000004] 0x4 (unreliable) [c000000001f2bad0] [c00000000025d694] ftrace_process_locs+0x4f4/0x5e0 [c000000001f2bb90] [c00000000020ff10] load_module+0x25b0/0x30c0 [c000000001f2bd00] [c000000000210cb0] sys_finit_module+0xc0/0x130 [c000000001f2be20] [c00000000000bda4] system_call+0x5c/0x70 Instruction dump: 419e0018 2f83ffff 419e00bc 2f83ffea 409e00cc 4800001c 0fe00000 3c62ff96 39000001 39400000 386386d0 480000c4 <0fe00000> 3ce20003 39000001 3c62ff96 ---[ end trace 4c438d5cebf78381 ]--- ftrace failed to modify [<c0080000012a0008>] 0xc0080000012a0008 actual: 01:00:4c:3c Initializing ftrace call sites ftrace record flags: 2000000 (0) expected tramp: c00000000006af4c Looking at the relocation records in __mcount_loc shows a few spurious entries: RELOCATION RECORDS FOR [__mcount_loc]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_ADDR64 .text.unlikely+0x0000000000000008 0000000000000008 R_PPC64_ADDR64 .text.unlikely+0x0000000000000014 0000000000000010 R_PPC64_ADDR64 .text.unlikely+0x0000000000000060 0000000000000018 R_PPC64_ADDR64 .text.unlikely+0x00000000000000b4 0000000000000020 R_PPC64_ADDR64 .init.text+0x0000000000000008 0000000000000028 R_PPC64_ADDR64 .init.text+0x0000000000000014 The first entry in each section is incorrect. Looking at the relocation records, the spurious entries correspond to the R_PPC64_ENTRY records: RELOCATION RECORDS FOR [.text.unlikely]: OFFSET TYPE VALUE 0000000000000000 R_PPC64_REL64 .TOC.-0x0000000000000008 0000000000000008 R_PPC64_ENTRY *ABS* 0000000000000014 R_PPC64_REL24 _mcount <snip> The problem is that we are not validating the return value from get_mcountsym() in sift_rel_mcount(). With this entry, mcountsym is 0, but Elf_r_sym(relp) also ends up being 0. Fix this by ensuring mcountsym is valid before processing the entry. Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Acked-by: Steven Rostedt (VMware) <rostedt@goodmis.org> Tested-by: Satheesh Rajendran <sathnaga@linux.vnet.ibm.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 8c6166c ] Prior to commit d021fab ("rds: rdma: add consumer reject") function "rds_rdma_cm_event_handler_cmn" would always honor a rejected connection attempt by issuing a "rds_conn_drop". The commit mentioned above added a "break", eliminating the "fallthrough" case and made the "rds_conn_drop" rather conditional: Now it only happens if a "consumer defined" reject (i.e. "rdma_reject") carries an integer-value of "1" inside "private_data": if (!conn) break; err = (int *)rdma_consumer_reject_data(cm_id, event, &len); if (!err || (err && ((*err) == RDS_RDMA_REJ_INCOMPAT))) { pr_warn("RDS/RDMA: conn <%pI6c, %pI6c> rejected, dropping connection\n", &conn->c_laddr, &conn->c_faddr); conn->c_proposed_version = RDS_PROTOCOL_COMPAT_VERSION; rds_conn_drop(conn); } rdsdebug("Connection rejected: %s\n", rdma_reject_msg(cm_id, event->status)); break; /* FALLTHROUGH */ A number of issues are worth mentioning here: #1) Previous versions of the RDS code simply rejected a connection by calling "rdma_reject(cm_id, NULL, 0);" So the value of the payload in "private_data" will not be "1", but "0". #2) Now the code has become dependent on host byte order and sizing. If one peer is big-endian, the other is little-endian, or there's a difference in sizeof(int) (e.g. ILP64 vs LP64), the *err check does not work as intended. #3) There is no check for "len" to see if the data behind *err is even valid. Luckily, it appears that the "rdma_reject(cm_id, NULL, 0)" will always carry 148 bytes of zeroized payload. But that should probably not be relied upon here. #4) With the added "break;", we might as well drop the misleading "/* FALLTHROUGH */" comment. This commit does _not_ address issue #2, as the sender would have to agree on a byte order as well. Here is the sequence of messages in this observed error-scenario: Host-A is pre-QoS changes (excluding the commit mentioned above) Host-B is post-QoS changes (including the commit mentioned above) #1 Host-B issues a connection request via function "rds_conn_path_transition" connection state transitions to "RDS_CONN_CONNECTING" #2 Host-A rejects the incompatible connection request (from #1) It does so by calling "rdma_reject(cm_id, NULL, 0);" #3 Host-B receives an "RDMA_CM_EVENT_REJECTED" event (from #2) But since the code is changed in the way described above, it won't drop the connection here, simply because "*err == 0". #4 Host-A issues a connection request #5 Host-B receives an "RDMA_CM_EVENT_CONNECT_REQUEST" event and ends up calling "rds_ib_cm_handle_connect". But since the state is already in "RDS_CONN_CONNECTING" (as of #1) it will end up issuing a "rdma_reject" without dropping the connection: if (rds_conn_state(conn) == RDS_CONN_CONNECTING) { /* Wait and see - our connect may still be succeeding */ rds_ib_stats_inc(s_ib_connect_raced); } goto out; torvalds#6 Host-A receives an "RDMA_CM_EVENT_REJECTED" event (from #5), drops the connection and tries again (goto #4) until it gives up. Tested-by: Zhu Yanjun <yanjun.zhu@oracle.com> Signed-off-by: Gerd Rausch <gerd.rausch@oracle.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e88439d ] [BUG] Lockdep will report the following circular locking dependency: WARNING: possible circular locking dependency detected 5.2.0-rc2-custom torvalds#24 Tainted: G O ------------------------------------------------------ btrfs/8631 is trying to acquire lock: 000000002536438c (&fs_info->qgroup_ioctl_lock#2){+.+.}, at: btrfs_qgroup_inherit+0x40/0x620 [btrfs] but task is already holding lock: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&fs_info->tree_log_mutex){+.+.}: __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_commit_transaction+0x475/0xa00 [btrfs] btrfs_commit_super+0x71/0x80 [btrfs] close_ctree+0x2bd/0x320 [btrfs] btrfs_put_super+0x15/0x20 [btrfs] generic_shutdown_super+0x72/0x110 kill_anon_super+0x18/0x30 btrfs_kill_super+0x16/0xa0 [btrfs] deactivate_locked_super+0x3a/0x80 deactivate_super+0x51/0x60 cleanup_mnt+0x3f/0x80 __cleanup_mnt+0x12/0x20 task_work_run+0x94/0xb0 exit_to_usermode_loop+0xd8/0xe0 do_syscall_64+0x210/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #1 (&fs_info->reloc_mutex){+.+.}: __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_commit_transaction+0x40d/0xa00 [btrfs] btrfs_quota_enable+0x2da/0x730 [btrfs] btrfs_ioctl+0x2691/0x2b40 [btrfs] do_vfs_ioctl+0xa9/0x6d0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe -> #0 (&fs_info->qgroup_ioctl_lock#2){+.+.}: lock_acquire+0xa7/0x190 __mutex_lock+0x76/0x940 mutex_lock_nested+0x1b/0x20 btrfs_qgroup_inherit+0x40/0x620 [btrfs] create_pending_snapshot+0x9d7/0xe60 [btrfs] create_pending_snapshots+0x94/0xb0 [btrfs] btrfs_commit_transaction+0x415/0xa00 [btrfs] btrfs_mksubvol+0x496/0x4e0 [btrfs] btrfs_ioctl_snap_create_transid+0x174/0x180 [btrfs] btrfs_ioctl_snap_create_v2+0x11c/0x180 [btrfs] btrfs_ioctl+0xa90/0x2b40 [btrfs] do_vfs_ioctl+0xa9/0x6d0 ksys_ioctl+0x67/0x90 __x64_sys_ioctl+0x1a/0x20 do_syscall_64+0x65/0x240 entry_SYSCALL_64_after_hwframe+0x49/0xbe other info that might help us debug this: Chain exists of: &fs_info->qgroup_ioctl_lock#2 --> &fs_info->reloc_mutex --> &fs_info->tree_log_mutex Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(&fs_info->tree_log_mutex); lock(&fs_info->reloc_mutex); lock(&fs_info->tree_log_mutex); lock(&fs_info->qgroup_ioctl_lock#2); *** DEADLOCK *** 6 locks held by btrfs/8631: #0: 00000000ed8f23f6 (sb_writers#12){.+.+}, at: mnt_want_write_file+0x28/0x60 #1: 000000009fb1597a (&type->i_mutex_dir_key#10/1){+.+.}, at: btrfs_mksubvol+0x70/0x4e0 [btrfs] #2: 0000000088c5ad88 (&fs_info->subvol_sem){++++}, at: btrfs_mksubvol+0x128/0x4e0 [btrfs] #3: 000000009606fc3e (sb_internal#2){.+.+}, at: start_transaction+0x37a/0x520 [btrfs] #4: 00000000f82bbdf5 (&fs_info->reloc_mutex){+.+.}, at: btrfs_commit_transaction+0x40d/0xa00 [btrfs] #5: 000000003d52cc23 (&fs_info->tree_log_mutex){+.+.}, at: create_pending_snapshot+0x8b6/0xe60 [btrfs] [CAUSE] Due to the delayed subvolume creation, we need to call btrfs_qgroup_inherit() inside commit transaction code, with a lot of other mutex hold. This hell of lock chain can lead to above problem. [FIX] On the other hand, we don't really need to hold qgroup_ioctl_lock if we're in the context of create_pending_snapshot(). As in that context, we're the only one being able to modify qgroup. All other qgroup functions which needs qgroup_ioctl_lock are either holding a transaction handle, or will start a new transaction: Functions will start a new transaction(): * btrfs_quota_enable() * btrfs_quota_disable() Functions hold a transaction handler: * btrfs_add_qgroup_relation() * btrfs_del_qgroup_relation() * btrfs_create_qgroup() * btrfs_remove_qgroup() * btrfs_limit_qgroup() * btrfs_qgroup_inherit() call inside create_subvol() So we have a higher level protection provided by transaction, thus we don't need to always hold qgroup_ioctl_lock in btrfs_qgroup_inherit(). Only the btrfs_qgroup_inherit() call in create_subvol() needs to hold qgroup_ioctl_lock, while the btrfs_qgroup_inherit() call in create_pending_snapshot() is already protected by transaction. So the fix is to detect the context by checking trans->transaction->state. If we're at TRANS_STATE_COMMIT_DOING, then we're in commit transaction context and no need to get the mutex. Reported-by: Nikolay Borisov <nborisov@suse.com> Signed-off-by: Qu Wenruo <wqu@suse.com> Signed-off-by: David Sterba <dsterba@suse.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit 2b5c8f0 upstream. Commit abbbdf1 ("replace kill_bdev() with __invalidate_device()") once did this, but 29eaadc ("nbd: stop using the bdev everywhere") resurrected kill_bdev() and it has been there since then. So buffer_head mappings still get killed on a server disconnection, and we can still hit the BUG_ON on a filesystem on the top of the nbd device. EXT4-fs (nbd0): mounted filesystem with ordered data mode. Opts: (null) block nbd0: Receive control failed (result -32) block nbd0: shutting down sockets print_req_error: I/O error, dev nbd0, sector 66264 flags 3000 EXT4-fs warning (device nbd0): htree_dirblock_to_tree:979: inode #2: lblock 0: comm ls: error -5 reading directory block print_req_error: I/O error, dev nbd0, sector 2264 flags 3000 EXT4-fs error (device nbd0): __ext4_get_inode_loc:4690: inode #2: block 283: comm ls: unable to read itable block EXT4-fs error (device nbd0) in ext4_reserve_inode_write:5894: IO failure ------------[ cut here ]------------ kernel BUG at fs/buffer.c:3057! invalid opcode: 0000 [#1] SMP PTI CPU: 7 PID: 40045 Comm: jbd2/nbd0-8 Not tainted 5.1.0-rc3+ #4 Hardware name: Amazon EC2 m5.12xlarge/, BIOS 1.0 10/16/2017 RIP: 0010:submit_bh_wbc+0x18b/0x190 ... Call Trace: jbd2_write_superblock+0xf1/0x230 [jbd2] ? account_entity_enqueue+0xc5/0xf0 jbd2_journal_update_sb_log_tail+0x94/0xe0 [jbd2] jbd2_journal_commit_transaction+0x12f/0x1d20 [jbd2] ? __switch_to_asm+0x40/0x70 ... ? lock_timer_base+0x67/0x80 kjournald2+0x121/0x360 [jbd2] ? remove_wait_queue+0x60/0x60 kthread+0xf8/0x130 ? commit_timeout+0x10/0x10 [jbd2] ? kthread_bind+0x10/0x10 ret_from_fork+0x35/0x40 With __invalidate_device(), I no longer hit the BUG_ON with sync or unmount on the disconnected device. Fixes: 29eaadc ("nbd: stop using the bdev everywhere") Cc: linux-block@vger.kernel.org Cc: Ratna Manoj Bolla <manoj.br@gmail.com> Cc: nbd@other.debian.org Cc: stable@vger.kernel.org Cc: David Woodhouse <dwmw@amazon.com> Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Munehisa Kamata <kamatam@amazon.com> Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 621e55f upstream. lockdep reports: WARNING: possible circular locking dependency detected modprobe/302 is trying to acquire lock: 0000000007c8919c ((wq_completion)ib_cm){+.+.}, at: flush_workqueue+0xdf/0x990 but task is already holding lock: 000000002d3d2ca9 (&device->client_data_rwsem){++++}, at: remove_client_context+0x79/0xd0 [ib_core] which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (&device->client_data_rwsem){++++}: down_read+0x3f/0x160 ib_get_net_dev_by_params+0xd5/0x200 [ib_core] cma_ib_req_handler+0x5f6/0x2090 [rdma_cm] cm_process_work+0x29/0x110 [ib_cm] cm_req_handler+0x10f5/0x1c00 [ib_cm] cm_work_handler+0x54c/0x311d [ib_cm] process_one_work+0x4aa/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #1 ((work_completion)(&(&work->work)->work)){+.+.}: process_one_work+0x45f/0xa30 worker_thread+0x62/0x5b0 kthread+0x1ca/0x1f0 ret_from_fork+0x24/0x30 -> #0 ((wq_completion)ib_cm){+.+.}: lock_acquire+0xc8/0x1d0 flush_workqueue+0x102/0x990 cm_remove_one+0x30e/0x3c0 [ib_cm] remove_client_context+0x94/0xd0 [ib_core] disable_device+0x10a/0x1f0 [ib_core] __ib_unregister_device+0x5a/0xe0 [ib_core] ib_unregister_device+0x21/0x30 [ib_core] mlx5_ib_stage_ib_reg_cleanup+0x9/0x10 [mlx5_ib] __mlx5_ib_remove+0x3d/0x70 [mlx5_ib] mlx5_ib_remove+0x12e/0x140 [mlx5_ib] mlx5_remove_device+0x144/0x150 [mlx5_core] mlx5_unregister_interface+0x3f/0xf0 [mlx5_core] mlx5_ib_cleanup+0x10/0x3a [mlx5_ib] __x64_sys_delete_module+0x227/0x350 do_syscall_64+0xc3/0x6a4 entry_SYSCALL_64_after_hwframe+0x49/0xbe Which is due to the read side of the client_data_rwsem being obtained recursively through a work queue flush during cm client removal. The lock is being held across the remove in remove_client_context() so that the function is a fence, once it returns the client is removed. This is required so that the two callers do not proceed with destruction until the client completes removal. Instead of using client_data_rwsem use the existing device unregistration refcount and add a similar client unregistration (client->uses) refcount. This will fence the two unregistration paths without holding any locks. Cc: <stable@vger.kernel.org> Fixes: 921eab1 ("RDMA/devices: Re-organize device.c locking") Signed-off-by: Jason Gunthorpe <jgg@mellanox.com> Signed-off-by: Leon Romanovsky <leonro@mellanox.com> Link: https://lore.kernel.org/r/20190731081841.32345-2-leon@kernel.org Signed-off-by: Doug Ledford <dledford@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit d0a255e upstream. A deadlock with this stacktrace was observed. The loop thread does a GFP_KERNEL allocation, it calls into dm-bufio shrinker and the shrinker depends on I/O completion in the dm-bufio subsystem. In order to fix the deadlock (and other similar ones), we set the flag PF_MEMALLOC_NOIO at loop thread entry. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 torvalds#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 torvalds#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] torvalds#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] torvalds#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] torvalds#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce torvalds#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 torvalds#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f torvalds#13 [ffff8813dedfbec0] kthread at ffffffff810a8428 torvalds#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 PID: 14127 TASK: ffff881455749c00 CPU: 11 COMMAND: "loop1" #0 [ffff88272f5af228] __schedule at ffffffff8173f405 #1 [ffff88272f5af280] schedule at ffffffff8173fa27 #2 [ffff88272f5af2a0] schedule_preempt_disabled at ffffffff8173fd5e #3 [ffff88272f5af2b0] __mutex_lock_slowpath at ffffffff81741fb5 #4 [ffff88272f5af330] mutex_lock at ffffffff81742133 #5 [ffff88272f5af350] dm_bufio_shrink_count at ffffffffa03865f9 [dm_bufio] torvalds#6 [ffff88272f5af380] shrink_slab at ffffffff811a86bd torvalds#7 [ffff88272f5af470] shrink_zone at ffffffff811ad778 torvalds#8 [ffff88272f5af500] do_try_to_free_pages at ffffffff811adb34 torvalds#9 [ffff88272f5af590] try_to_free_pages at ffffffff811adef8 torvalds#10 [ffff88272f5af610] __alloc_pages_nodemask at ffffffff811a09c3 torvalds#11 [ffff88272f5af710] alloc_pages_current at ffffffff811e8b71 torvalds#12 [ffff88272f5af760] new_slab at ffffffff811f4523 torvalds#13 [ffff88272f5af7b0] __slab_alloc at ffffffff8173a1b5 torvalds#14 [ffff88272f5af880] kmem_cache_alloc at ffffffff811f484b torvalds#15 [ffff88272f5af8d0] do_blockdev_direct_IO at ffffffff812535b3 torvalds#16 [ffff88272f5afb00] __blockdev_direct_IO at ffffffff81255dc3 torvalds#17 [ffff88272f5afb30] xfs_vm_direct_IO at ffffffffa01fe3fc [xfs] torvalds#18 [ffff88272f5afb90] generic_file_read_iter at ffffffff81198994 torvalds#19 [ffff88272f5afc50] __dta_xfs_file_read_iter_2398 at ffffffffa020c970 [xfs] torvalds#20 [ffff88272f5afcc0] lo_rw_aio at ffffffffa0377042 [loop] torvalds#21 [ffff88272f5afd70] loop_queue_work at ffffffffa0377c3b [loop] torvalds#22 [ffff88272f5afe60] kthread_worker_fn at ffffffff810a8a0c torvalds#23 [ffff88272f5afec0] kthread at ffffffff810a8428 torvalds#24 [ffff88272f5aff50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Jens Axboe <axboe@kernel.dk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…OL_MF_STRICT were specified commit d883544 upstream. When both MPOL_MF_MOVE* and MPOL_MF_STRICT was specified, mbind() should try best to migrate misplaced pages, if some of the pages could not be migrated, then return -EIO. There are three different sub-cases: 1. vma is not migratable 2. vma is migratable, but there are unmovable pages 3. vma is migratable, pages are movable, but migrate_pages() fails If #1 happens, kernel would just abort immediately, then return -EIO, after a7f40cf ("mm: mempolicy: make mbind() return -EIO when MPOL_MF_STRICT is specified"). If #3 happens, kernel would set policy and migrate pages with best-effort, but won't rollback the migrated pages and reset the policy back. Before that commit, they behaves in the same way. It'd better to keep their behavior consistent. But, rolling back the migrated pages and resetting the policy back sounds not feasible, so just make #1 behave as same as #3. Userspace will know that not everything was successfully migrated (via -EIO), and can take whatever steps it deems necessary - attempt rollback, determine which exact page(s) are violating the policy, etc. Make queue_pages_range() return 1 to indicate there are unmovable pages or vma is not migratable. The #2 is not handled correctly in the current kernel, the following patch will fix it. [yang.shi@linux.alibaba.com: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/1563556862-54056-2-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1561162809-59140-2-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit a53190a upstream. When running syzkaller internally, we ran into the below bug on 4.9.x kernel: kernel BUG at mm/huge_memory.c:2124! invalid opcode: 0000 [#1] SMP KASAN CPU: 0 PID: 1518 Comm: syz-executor107 Not tainted 4.9.168+ #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011 task: ffff880067b34900 task.stack: ffff880068998000 RIP: split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124 Call Trace: split_huge_page include/linux/huge_mm.h:100 [inline] queue_pages_pte_range+0x7e1/0x1480 mm/mempolicy.c:538 walk_pmd_range mm/pagewalk.c:50 [inline] walk_pud_range mm/pagewalk.c:90 [inline] walk_pgd_range mm/pagewalk.c:116 [inline] __walk_page_range+0x44a/0xdb0 mm/pagewalk.c:208 walk_page_range+0x154/0x370 mm/pagewalk.c:285 queue_pages_range+0x115/0x150 mm/mempolicy.c:694 do_mbind mm/mempolicy.c:1241 [inline] SYSC_mbind+0x3c3/0x1030 mm/mempolicy.c:1370 SyS_mbind+0x46/0x60 mm/mempolicy.c:1352 do_syscall_64+0x1d2/0x600 arch/x86/entry/common.c:282 entry_SYSCALL_64_after_swapgs+0x5d/0xdb Code: c7 80 1c 02 00 e8 26 0a 76 01 <0f> 0b 48 c7 c7 40 46 45 84 e8 4c RIP [<ffffffff81895d6b>] split_huge_page_to_list+0x8fb/0x1030 mm/huge_memory.c:2124 RSP <ffff88006899f980> with the below test: uint64_t r[1] = {0xffffffffffffffff}; int main(void) { syscall(__NR_mmap, 0x20000000, 0x1000000, 3, 0x32, -1, 0); intptr_t res = 0; res = syscall(__NR_socket, 0x11, 3, 0x300); if (res != -1) r[0] = res; *(uint32_t*)0x20000040 = 0x10000; *(uint32_t*)0x20000044 = 1; *(uint32_t*)0x20000048 = 0xc520; *(uint32_t*)0x2000004c = 1; syscall(__NR_setsockopt, r[0], 0x107, 0xd, 0x20000040, 0x10); syscall(__NR_mmap, 0x20fed000, 0x10000, 0, 0x8811, r[0], 0); *(uint64_t*)0x20000340 = 2; syscall(__NR_mbind, 0x20ff9000, 0x4000, 0x4002, 0x20000340, 0x45d4, 3); return 0; } Actually the test does: mmap(0x20000000, 16777216, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x20000000 socket(AF_PACKET, SOCK_RAW, 768) = 3 setsockopt(3, SOL_PACKET, PACKET_TX_RING, {block_size=65536, block_nr=1, frame_size=50464, frame_nr=1}, 16) = 0 mmap(0x20fed000, 65536, PROT_NONE, MAP_SHARED|MAP_FIXED|MAP_POPULATE|MAP_DENYWRITE, 3, 0) = 0x20fed000 mbind(..., MPOL_MF_STRICT|MPOL_MF_MOVE) = 0 The setsockopt() would allocate compound pages (16 pages in this test) for packet tx ring, then the mmap() would call packet_mmap() to map the pages into the user address space specified by the mmap() call. When calling mbind(), it would scan the vma to queue the pages for migration to the new node. It would split any huge page since 4.9 doesn't support THP migration, however, the packet tx ring compound pages are not THP and even not movable. So, the above bug is triggered. However, the later kernel is not hit by this issue due to commit d44d363 ("mm: don't assume anonymous pages have SwapBacked flag"), which just removes the PageSwapBacked check for a different reason. But, there is a deeper issue. According to the semantic of mbind(), it should return -EIO if MPOL_MF_MOVE or MPOL_MF_MOVE_ALL was specified and MPOL_MF_STRICT was also specified, but the kernel was unable to move all existing pages in the range. The tx ring of the packet socket is definitely not movable, however, mbind() returns success for this case. Although the most socket file associates with non-movable pages, but XDP may have movable pages from gup. So, it sounds not fine to just check the underlying file type of vma in vma_migratable(). Change migrate_page_add() to check if the page is movable or not, if it is unmovable, just return -EIO. But do not abort pte walk immediately, since there may be pages off LRU temporarily. We should migrate other pages if MPOL_MF_MOVE* is specified. Set has_unmovable flag if some paged could not be not moved, then return -EIO for mbind() eventually. With this change the above test would return -EIO as expected. [yang.shi@linux.alibaba.com: fix review comments from Vlastimil] Link: http://lkml.kernel.org/r/1563556862-54056-3-git-send-email-yang.shi@linux.alibaba.com Link: http://lkml.kernel.org/r/1561162809-59140-3-git-send-email-yang.shi@linux.alibaba.com Signed-off-by: Yang Shi <yang.shi@linux.alibaba.com> Reviewed-by: Vlastimil Babka <vbabka@suse.cz> Cc: Michal Hocko <mhocko@suse.com> Cc: Mel Gorman <mgorman@techsingularity.net> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit e8c220f upstream. Since commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") when booting with the DMA driver as module (such as CONFIG_FSL_EDMA=m) the following endless clk warnings are seen: [ 153.077831] ------------[ cut here ]------------ [ 153.082528] WARNING: CPU: 0 PID: 15 at drivers/clk/clk.c:924 clk_core_disable_lock+0x18/0x24 [ 153.093077] i2c0 already disabled [ 153.096416] Modules linked in: [ 153.099521] CPU: 0 PID: 15 Comm: kworker/0:1 Tainted: G W 5.2.0+ torvalds#321 [ 153.107290] Hardware name: Freescale Vybrid VF5xx/VF6xx (Device Tree) [ 153.113772] Workqueue: events deferred_probe_work_func [ 153.118979] [<c0019560>] (unwind_backtrace) from [<c0014734>] (show_stack+0x10/0x14) [ 153.126778] [<c0014734>] (show_stack) from [<c083f8dc>] (dump_stack+0x9c/0xd4) [ 153.134051] [<c083f8dc>] (dump_stack) from [<c0031154>] (__warn+0xf8/0x124) [ 153.141056] [<c0031154>] (__warn) from [<c0031248>] (warn_slowpath_fmt+0x38/0x48) [ 153.148580] [<c0031248>] (warn_slowpath_fmt) from [<c040fde0>] (clk_core_disable_lock+0x18/0x24) [ 153.157413] [<c040fde0>] (clk_core_disable_lock) from [<c058f520>] (i2c_imx_probe+0x554/0x6ec) [ 153.166076] [<c058f520>] (i2c_imx_probe) from [<c04b9178>] (platform_drv_probe+0x48/0x98) [ 153.174297] [<c04b9178>] (platform_drv_probe) from [<c04b7298>] (really_probe+0x1d8/0x2c0) [ 153.182605] [<c04b7298>] (really_probe) from [<c04b7554>] (driver_probe_device+0x5c/0x174) [ 153.190909] [<c04b7554>] (driver_probe_device) from [<c04b58c8>] (bus_for_each_drv+0x44/0x8c) [ 153.199480] [<c04b58c8>] (bus_for_each_drv) from [<c04b746c>] (__device_attach+0xa0/0x108) [ 153.207782] [<c04b746c>] (__device_attach) from [<c04b65a4>] (bus_probe_device+0x88/0x90) [ 153.215999] [<c04b65a4>] (bus_probe_device) from [<c04b6a04>] (deferred_probe_work_func+0x60/0x90) [ 153.225003] [<c04b6a04>] (deferred_probe_work_func) from [<c004f190>] (process_one_work+0x204/0x634) [ 153.234178] [<c004f190>] (process_one_work) from [<c004f618>] (worker_thread+0x20/0x484) [ 153.242315] [<c004f618>] (worker_thread) from [<c0055c2c>] (kthread+0x118/0x150) [ 153.249758] [<c0055c2c>] (kthread) from [<c00090b4>] (ret_from_fork+0x14/0x20) [ 153.257006] Exception stack(0xdde43fb0 to 0xdde43ff8) [ 153.262095] 3fa0: 00000000 00000000 00000000 00000000 [ 153.270306] 3fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 153.278520] 3fe0: 00000000 00000000 00000000 00000000 00000013 00000000 [ 153.285159] irq event stamp: 3323022 [ 153.288787] hardirqs last enabled at (3323021): [<c0861c4c>] _raw_spin_unlock_irq+0x24/0x2c [ 153.297261] hardirqs last disabled at (3323022): [<c040d7a0>] clk_enable_lock+0x10/0x124 [ 153.305392] softirqs last enabled at (3322092): [<c000a504>] __do_softirq+0x344/0x540 [ 153.313352] softirqs last disabled at (3322081): [<c00385c0>] irq_exit+0x10c/0x128 [ 153.320946] ---[ end trace a506731ccd9bd703 ]--- This endless clk warnings behaviour is well explained by Andrey Smirnov: "Allocating DMA after registering I2C adapter can lead to infinite probing loop, for example, consider the following scenario: 1. i2c_imx_probe() is called and successfully registers an I2C adapter via i2c_add_numbered_adapter() 2. As a part of i2c_add_numbered_adapter() new I2C slave devices are added from DT which results in a call to driver_deferred_probe_trigger() 3. i2c_imx_probe() continues and calls i2c_imx_dma_request() which due to lack of proper DMA driver returns -EPROBE_DEFER 4. i2c_imx_probe() fails, removes I2C adapter and returns -EPROBE_DEFER, which places it into deferred probe list 5. Deferred probe work triggered in #2 above kicks in and calls i2c_imx_probe() again thus bringing us to step #1" So revert commit e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") and restore the old behaviour, in order to avoid regressions on existing setups. Cc: <stable@vger.kernel.org> Reported-by: Andrey Smirnov <andrew.smirnov@gmail.com> Reported-by: Russell King <linux@armlinux.org.uk> Fixes: e1ab9a4 ("i2c: imx: improve the error handling in i2c_imx_dma_request()") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Wolfram Sang <wsa@the-dreams.de> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 60034d3 ] There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 torvalds#41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcf ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by: syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com Signed-off-by: David Howells <dhowells@redhat.com> Reviewed-by: Marc Dionne <marc.dionne@auristor.com> Reviewed-by: Jeffrey Altman <jaltman@auristor.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit cf3591e upstream. Revert the commit bd293d0. The proper fix has been made available with commit d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread"). Note that the fix offered by commit bd293d0 doesn't really prevent the deadlock from occuring - if we look at the stacktrace reported by Junxiao Bi, we see that it hangs in bit_wait_io and not on the mutex - i.e. it has already successfully taken the mutex. Changing the mutex from mutex_lock to mutex_trylock won't help with deadlocks that happen afterwards. PID: 474 TASK: ffff8813e11f4600 CPU: 10 COMMAND: "kswapd0" #0 [ffff8813dedfb938] __schedule at ffffffff8173f405 #1 [ffff8813dedfb990] schedule at ffffffff8173fa27 #2 [ffff8813dedfb9b0] schedule_timeout at ffffffff81742fec #3 [ffff8813dedfba60] io_schedule_timeout at ffffffff8173f186 #4 [ffff8813dedfbaa0] bit_wait_io at ffffffff8174034f #5 [ffff8813dedfbac0] __wait_on_bit at ffffffff8173fec8 torvalds#6 [ffff8813dedfbb10] out_of_line_wait_on_bit at ffffffff8173ff81 torvalds#7 [ffff8813dedfbb90] __make_buffer_clean at ffffffffa038736f [dm_bufio] torvalds#8 [ffff8813dedfbbb0] __try_evict_buffer at ffffffffa0387bb8 [dm_bufio] torvalds#9 [ffff8813dedfbbd0] dm_bufio_shrink_scan at ffffffffa0387cc3 [dm_bufio] torvalds#10 [ffff8813dedfbc40] shrink_slab at ffffffff811a87ce torvalds#11 [ffff8813dedfbd30] shrink_zone at ffffffff811ad778 torvalds#12 [ffff8813dedfbdc0] kswapd at ffffffff811ae92f torvalds#13 [ffff8813dedfbec0] kthread at ffffffff810a8428 torvalds#14 [ffff8813dedfbf50] ret_from_fork at ffffffff81745242 Signed-off-by: Mikulas Patocka <mpatocka@redhat.com> Cc: stable@vger.kernel.org Fixes: bd293d0 ("dm bufio: fix deadlock with loop device") Depends-on: d0a255e ("loop: set PF_MEMALLOC_NOIO for the worker thread") Signed-off-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 86968ef ] Calling ceph_buffer_put() in __ceph_setxattr() may end up freeing the i_xattrs.prealloc_blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 650, name: fsstress 3 locks held by fsstress/650: #0: 00000000870a0fe8 (sb_writers#8){.+.+}, at: mnt_want_write+0x20/0x50 #1: 00000000ba0c4c74 (&type->i_mutex_dir_key#6){++++}, at: vfs_setxattr+0x55/0xa0 #2: 000000008dfbb3f2 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: __ceph_setxattr+0x297/0x810 CPU: 1 PID: 650 Comm: fsstress Not tainted 5.2.0+ torvalds#437 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_setxattr+0x2b4/0x810 __vfs_setxattr+0x66/0x80 __vfs_setxattr_noperm+0x59/0xf0 vfs_setxattr+0x81/0xa0 setxattr+0x115/0x230 ? filename_lookup+0xc9/0x140 ? rcu_read_lock_sched_held+0x74/0x80 ? rcu_sync_lockdep_assert+0x2e/0x60 ? __sb_start_write+0x142/0x1a0 ? mnt_want_write+0x20/0x50 path_setxattr+0xba/0xd0 __x64_sys_lsetxattr+0x24/0x30 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7ff23514359a Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…s_blob() [ Upstream commit 12fe3dd ] Calling ceph_buffer_put() in __ceph_build_xattrs_blob() may result in freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by having this function returning the old blob buffer and have the callers of this function freeing it when the lock is released. The following backtrace was triggered by fstests generic/117. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 649, name: fsstress 4 locks held by fsstress/649: #0: 00000000a7478e7e (&type->s_umount_key#19){++++}, at: iterate_supers+0x77/0xf0 #1: 00000000f8de1423 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: ceph_check_caps+0x7b/0xc60 #2: 00000000562f2b27 (&s->s_mutex){+.+.}, at: ceph_check_caps+0x3bd/0xc60 #3: 00000000f83ce16a (&mdsc->snap_rwsem){++++}, at: ceph_check_caps+0x3ed/0xc60 CPU: 1 PID: 649 Comm: fsstress Not tainted 5.2.0+ torvalds#439 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 __ceph_build_xattrs_blob+0x12b/0x170 __send_cap+0x302/0x540 ? __lock_acquire+0x23c/0x1e40 ? __mark_caps_flushing+0x15c/0x280 ? _raw_spin_unlock+0x24/0x30 ceph_check_caps+0x5f0/0xc60 ceph_flush_dirty_caps+0x7c/0x150 ? __ia32_sys_fdatasync+0x20/0x20 ceph_sync_fs+0x5a/0x130 iterate_supers+0x8f/0xf0 ksys_sync+0x4f/0xb0 __ia32_sys_sync+0xa/0x10 do_syscall_64+0x50/0x1c0 entry_SYSCALL_64_after_hwframe+0x49/0xbe RIP: 0033:0x7fc6409ab617 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit af8a85a ] Calling ceph_buffer_put() in fill_inode() may result in freeing the i_xattrs.blob buffer while holding the i_ceph_lock. This can be fixed by postponing the call until later, when the lock is released. The following backtrace was triggered by fstests generic/070. BUG: sleeping function called from invalid context at mm/vmalloc.c:2283 in_atomic(): 1, irqs_disabled(): 0, pid: 3852, name: kworker/0:4 6 locks held by kworker/0:4/3852: #0: 000000004270f6bb ((wq_completion)ceph-msgr){+.+.}, at: process_one_work+0x1b8/0x5f0 #1: 00000000eb420803 ((work_completion)(&(&con->work)->work)){+.+.}, at: process_one_work+0x1b8/0x5f0 #2: 00000000be1c53a4 (&s->s_mutex){+.+.}, at: dispatch+0x288/0x1476 #3: 00000000559cb958 (&mdsc->snap_rwsem){++++}, at: dispatch+0x2eb/0x1476 #4: 000000000d5ebbae (&req->r_fill_mutex){+.+.}, at: dispatch+0x2fc/0x1476 #5: 00000000a83d0514 (&(&ci->i_ceph_lock)->rlock){+.+.}, at: fill_inode.isra.0+0xf8/0xf70 CPU: 0 PID: 3852 Comm: kworker/0:4 Not tainted 5.2.0+ torvalds#441 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-prebuilt.qemu.org 04/01/2014 Workqueue: ceph-msgr ceph_con_workfn Call Trace: dump_stack+0x67/0x90 ___might_sleep.cold+0x9f/0xb1 vfree+0x4b/0x60 ceph_buffer_release+0x1b/0x60 fill_inode.isra.0+0xa9b/0xf70 ceph_fill_trace+0x13b/0xc70 ? dispatch+0x2eb/0x1476 dispatch+0x320/0x1476 ? __mutex_unlock_slowpath+0x4d/0x2a0 ceph_con_workfn+0xc97/0x2ec0 ? process_one_work+0x1b8/0x5f0 process_one_work+0x244/0x5f0 worker_thread+0x4d/0x3e0 kthread+0x105/0x140 ? process_one_work+0x5f0/0x5f0 ? kthread_park+0x90/0x90 ret_from_fork+0x3a/0x50 Signed-off-by: Luis Henriques <lhenriques@suse.com> Reviewed-by: Jeff Layton <jlayton@kernel.org> Signed-off-by: Ilya Dryomov <idryomov@gmail.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

syzbot reported: BUG: KMSAN: uninit-value in capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 CPU: 0 PID: 10025 Comm: syz-executor379 Not tainted 4.20.0-rc7+ #2 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 Call Trace: __dump_stack lib/dump_stack.c:77 [inline] dump_stack+0x173/0x1d0 lib/dump_stack.c:113 kmsan_report+0x12e/0x2a0 mm/kmsan/kmsan.c:613 __msan_warning+0x82/0xf0 mm/kmsan/kmsan_instr.c:313 capi_write+0x791/0xa90 drivers/isdn/capi/capi.c:700 do_loop_readv_writev fs/read_write.c:703 [inline] do_iter_write+0x83e/0xd80 fs/read_write.c:961 vfs_writev fs/read_write.c:1004 [inline] do_writev+0x397/0x840 fs/read_write.c:1039 __do_sys_writev fs/read_write.c:1112 [inline] __se_sys_writev+0x9b/0xb0 fs/read_write.c:1109 __x64_sys_writev+0x4a/0x70 fs/read_write.c:1109 do_syscall_64+0xbc/0xf0 arch/x86/entry/common.c:291 entry_SYSCALL_64_after_hwframe+0x63/0xe7 [...] The problem is that capi_write() is reading past the end of the message. Fix it by checking the message's length in the needed places. Reported-and-tested-by: syzbot+0849c524d9c634f5ae66@syzkaller.appspotmail.com Signed-off-by: Eric Biggers <ebiggers@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>

…empts The lock_extent_buffer_io() returns 1 to the caller to tell it everything went fine and the callers needs to start writeback for the extent buffer (submit a bio, etc), 0 to tell the caller everything went fine but it does not need to start writeback for the extent buffer, and a negative value if some error happened. When it's about to return 1 it tries to lock all pages, and if a try lock on a page fails, and we didn't flush any existing bio in our "epd", it calls flush_write_bio(epd) and overwrites the return value of 1 to 0 or an error. The page might have been locked elsewhere, not with the goal of starting writeback of the extent buffer, and even by some code other than btrfs, like page migration for example, so it does not mean the writeback of the extent buffer was already started by some other task, so returning a 0 tells the caller (btree_write_cache_pages()) to not start writeback for the extent buffer. Note that epd might currently have either no bio, so flush_write_bio() returns 0 (success) or it might have a bio for another extent buffer with a lower index (logical address). Since we return 0 with the EXTENT_BUFFER_WRITEBACK bit set on the extent buffer and writeback is never started for the extent buffer, future attempts to writeback the extent buffer will hang forever waiting on that bit to be cleared, since it can only be cleared after writeback completes. Such hang is reported with a trace like the following: [49887.347053] INFO: task btrfs-transacti:1752 blocked for more than 122 seconds. [49887.347059] Not tainted 5.2.13-gentoo #2 [49887.347060] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message. [49887.347062] btrfs-transacti D 0 1752 2 0x80004000 [49887.347064] Call Trace: [49887.347069] ? __schedule+0x265/0x830 [49887.347071] ? bit_wait+0x50/0x50 [49887.347072] ? bit_wait+0x50/0x50 [49887.347074] schedule+0x24/0x90 [49887.347075] io_schedule+0x3c/0x60 [49887.347077] bit_wait_io+0x8/0x50 [49887.347079] __wait_on_bit+0x6c/0x80 [49887.347081] ? __lock_release.isra.29+0x155/0x2d0 [49887.347083] out_of_line_wait_on_bit+0x7b/0x80 [49887.347084] ? var_wake_function+0x20/0x20 [49887.347087] lock_extent_buffer_for_io+0x28c/0x390 [49887.347089] btree_write_cache_pages+0x18e/0x340 [49887.347091] do_writepages+0x29/0xb0 [49887.347093] ? kmem_cache_free+0x132/0x160 [49887.347095] ? convert_extent_bit+0x544/0x680 [49887.347097] filemap_fdatawrite_range+0x70/0x90 [49887.347099] btrfs_write_marked_extents+0x53/0x120 [49887.347100] btrfs_write_and_wait_transaction.isra.4+0x38/0xa0 [49887.347102] btrfs_commit_transaction+0x6bb/0x990 [49887.347103] ? start_transaction+0x33e/0x500 [49887.347105] transaction_kthread+0x139/0x15c So fix this by not overwriting the return value (ret) with the result from flush_write_bio(). We also need to clear the EXTENT_BUFFER_WRITEBACK bit in case flush_write_bio() returns an error, otherwise it will hang any future attempts to writeback the extent buffer, and undo all work done before (set back EXTENT_BUFFER_DIRTY, etc). This is a regression introduced in the 5.2 kernel. Fixes: 2e3c251 ("btrfs: extent_io: add proper error handling to lock_extent_buffer_for_io()") Fixes: f434062 ("btrfs: extent_io: Move the BUG_ON() in flush_write_bio() one level up") Reported-by: Zdenek Sojka <zsojka@seznam.cz> Link: https://lore.kernel.org/linux-btrfs/GpO.2yos.3WGDOLpx6t%7D.1TUDYM@seznam.cz/T/#u Reported-by: Stefan Priebe - Profihost AG <s.priebe@profihost.ag> Link: https://lore.kernel.org/linux-btrfs/5c4688ac-10a7-fb07-70e8-c5d31a3fbb38@profihost.ag/T/#t Reported-by: Drazen Kacar <drazen.kacar@oradian.com> Link: https://lore.kernel.org/linux-btrfs/DB8PR03MB562876ECE2319B3E579590F799C80@DB8PR03MB5628.eurprd03.prod.outlook.com/ Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204377 Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

commit bd200d1 upstream. [Why] DRM private objects have no hw_done/flip_done fencing mechanism on their own and cannot be used to sequence commits accordingly. When issuing commits that don't touch the same set of hardware resources like page-flips on different CRTCs we can run into the issue below because of this: 1. Client requests non-blocking Commit #1, has a new dc_state #1, state is swapped, commit tail is deferred to work queue 2. Client requests non-blocking Commit #2, has a new dc_state #2, state is swapped, commit tail is deferred to work queue 3. Commit #2 work starts, commit tail finishes, atomic state is cleared, dc_state #1 is freed 4. Commit #1 work starts, commit tail encounters null pointer deref on dc_state #1 In order to change the DC state as in the private object we need to ensure that we wait for all outstanding commits to finish and that any other pending commits must wait for the current one to finish as well. We do this for MEDIUM and FULL updates. But not for FAST updates, nor would we want to since it would cause stuttering from the delays. FAST updates that go through dm_determine_update_type_for_commit always create a new dc_state and lock the DRM private object if there are any changed planes. We need the old state to validate, but we don't actually need the new state here. [How] If the commit isn't a full update then the use after free can be resolved by simply discarding the new state entirely and retaining the existing one instead. With this change the sequence above can be reexamined. Commit #2 will still free Commit #1's reference, but before this happens we actually added an additional reference as part of Commit #2. If an update comes in during this that needs to change the dc_state it will need to wait on Commit #1 and Commit #2 to finish. Then it'll swap the state, finish the work in commit tail and drop the last reference on Commit #2's dc_state. Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=204181 Fixes: 004b393 ("drm/amd/display: Check scaling info when determing update type") Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com> Acked-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: David Francis <david.francis@amd.com> Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

Recent commit aa626da ("iavf: Detach device during reset task") removed netif_tx_stop_all_queues() with an assumption that Tx queues are already stopped by netif_device_detach() in the beginning of reset task. This assumption is incorrect because during reset task a potential link event can start Tx queues again. Revert this change to fix this issue. Reproducer: 1. Run some Tx traffic (e.g. iperf3) over iavf interface 2. Switch MTU of this interface in a loop [root@host ~]# cat repro.sh IF=enp2s0f0v0 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do for i in 1280 1500 2000 900 ; do ip link set $IF mtu $i sleep 2 done done [root@host ~]# ./repro.sh Result: [ 306.199917] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 308.205944] iavf 0000:02:02.0 enp2s0f0v0: NIC Link is Up Speed is 40 Gbps Full Duplex [ 310.103223] BUG: kernel NULL pointer dereference, address: 0000000000000008 [ 310.110179] #PF: supervisor write access in kernel mode [ 310.115396] #PF: error_code(0x0002) - not-present page [ 310.120526] PGD 0 P4D 0 [ 310.123057] Oops: 0002 [#1] PREEMPT SMP NOPTI [ 310.127408] CPU: 24 PID: 183 Comm: kworker/u64:9 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 310.135485] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 310.145728] Workqueue: iavf iavf_reset_task [iavf] [ 310.150520] RIP: 0010:iavf_xmit_frame_ring+0xd1/0xf70 [iavf] [ 310.156180] Code: d0 0f 86 da 00 00 00 83 e8 01 0f b7 fa 29 f8 01 c8 39 c6 0f 8f a0 08 00 00 48 8b 45 20 48 8d 14 92 bf 01 00 00 00 4c 8d 3c d0 <49> 89 5f 08 8b 43 70 66 41 89 7f 14 41 89 47 10 f6 83 82 00 00 00 [ 310.174918] RSP: 0018:ffffbb5f0082caa0 EFLAGS: 00010293 [ 310.180137] RAX: 0000000000000000 RBX: ffff92345471a6e8 RCX: 0000000000000200 [ 310.187259] RDX: 0000000000000000 RSI: 000000000000000d RDI: 0000000000000001 [ 310.194385] RBP: ffff92341d249000 R08: ffff92434987fcac R09: 0000000000000001 [ 310.201509] R10: 0000000011f683b9 R11: 0000000011f50641 R12: 0000000000000008 [ 310.208631] R13: ffff923447500000 R14: 0000000000000000 R15: 0000000000000000 [ 310.215756] FS: 0000000000000000(0000) GS:ffff92434ee00000(0000) knlGS:0000000000000000 [ 310.223835] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 310.229572] CR2: 0000000000000008 CR3: 0000000fbc210004 CR4: 0000000000770ee0 [ 310.236696] PKRU: 55555554 [ 310.239399] Call Trace: [ 310.241844] <IRQ> [ 310.243855] ? dst_alloc+0x5b/0xb0 [ 310.247260] dev_hard_start_xmit+0x9e/0x1f0 [ 310.251439] sch_direct_xmit+0xa0/0x370 [ 310.255276] __qdisc_run+0x13e/0x580 [ 310.258848] __dev_queue_xmit+0x431/0xd00 [ 310.262851] ? selinux_ip_postroute+0x147/0x3f0 [ 310.267377] ip_finish_output2+0x26c/0x540 Fixes: aa626da ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

After commit aa626da ("iavf: Detach device during reset task") the device is detached during reset task and re-attached at its end. The problem occurs when reset task fails because Tx queues are restarted during device re-attach and this leads later to a crash. To resolve this issue properly close the net device in cause of failure in reset task to avoid restarting of tx queues at the end. Also replace the hacky manipulation with IFF_UP flag by device close that clears properly both IFF_UP and __LINK_STATE_START flags. In these case iavf_close() does not do anything because the adapter state is already __IAVF_DOWN. Reproducer: 1) Run some Tx traffic (e.g. iperf3) over iavf interface 2) Set VF trusted / untrusted in loop [root@host ~]# cat repro.sh PF=enp65s0f0 IF=${PF}v0 ip link set up $IF ip addr add 192.168.0.2/24 dev $IF sleep 1 iperf3 -c 192.168.0.1 -t 600 --logfile /dev/null & sleep 2 while :; do ip link set $PF vf 0 trust on ip link set $PF vf 0 trust off done [root@host ~]# ./repro.sh Result: [ 2006.650969] iavf 0000:41:01.0: Failed to init adminq: -53 [ 2006.675662] ice 0000:41:00.0: VF 0 is now trusted [ 2006.689997] iavf 0000:41:01.0: Reset task did not complete, VF disabled [ 2006.696611] iavf 0000:41:01.0: failed to allocate resources during reinit [ 2006.703209] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.737011] ice 0000:41:00.0: VF 0 is now trusted [ 2006.764536] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.768919] BUG: kernel NULL pointer dereference, address: 0000000000000b4a [ 2006.776358] #PF: supervisor read access in kernel mode [ 2006.781488] #PF: error_code(0x0000) - not-present page [ 2006.786620] PGD 0 P4D 0 [ 2006.789152] Oops: 0000 [#1] PREEMPT SMP NOPTI [ 2006.792903] ice 0000:41:00.0: VF 0 is now trusted [ 2006.793501] CPU: 4 PID: 0 Comm: swapper/4 Kdump: loaded Not tainted 6.1.0-rc3+ #2 [ 2006.805668] Hardware name: Abacus electric, s.r.o. - servis@abacus.cz Super Server/H12SSW-iN, BIOS 2.4 04/13/2022 [ 2006.815915] RIP: 0010:iavf_xmit_frame_ring+0x96/0xf70 [iavf] [ 2006.821028] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.821572] Code: 48 83 c1 04 48 c1 e1 04 48 01 f9 48 83 c0 10 6b 50 f8 55 c1 ea 14 45 8d 64 14 01 48 39 c8 75 eb 41 83 fc 07 0f 8f e9 08 00 00 <0f> b7 45 4a 0f b7 55 48 41 8d 74 24 05 31 c9 66 39 d0 0f 86 da 00 [ 2006.845181] RSP: 0018:ffffb253004bc9e8 EFLAGS: 00010293 [ 2006.850397] RAX: ffff9d154de45b00 RBX: ffff9d15497d52e8 RCX: ffff9d154de45b00 [ 2006.856327] ice 0000:41:00.0: VF 0 is now trusted [ 2006.857523] RDX: 0000000000000000 RSI: 00000000000005a8 RDI: ffff9d154de45ac0 [ 2006.857525] RBP: 0000000000000b00 R08: ffff9d159cb010ac R09: 0000000000000001 [ 2006.857526] R10: ffff9d154de45940 R11: 0000000000000000 R12: 0000000000000002 [ 2006.883600] R13: ffff9d1770838dc0 R14: 0000000000000000 R15: ffffffffc07b8380 [ 2006.885840] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.890725] FS: 0000000000000000(0000) GS:ffff9d248e900000(0000) knlGS:0000000000000000 [ 2006.890727] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2006.909419] CR2: 0000000000000b4a CR3: 0000000c39c10002 CR4: 0000000000770ee0 [ 2006.916543] PKRU: 55555554 [ 2006.918254] ice 0000:41:00.0: VF 0 is now trusted [ 2006.919248] Call Trace: [ 2006.919250] <IRQ> [ 2006.919252] dev_hard_start_xmit+0x9e/0x1f0 [ 2006.932587] sch_direct_xmit+0xa0/0x370 [ 2006.936424] __dev_queue_xmit+0x7af/0xd00 [ 2006.940429] ip_finish_output2+0x26c/0x540 [ 2006.944519] ip_output+0x71/0x110 [ 2006.947831] ? __ip_finish_output+0x2b0/0x2b0 [ 2006.952180] __ip_queue_xmit+0x16d/0x400 [ 2006.952721] ice 0000:41:00.0: VF 0 is now untrusted [ 2006.956098] __tcp_transmit_skb+0xa96/0xbf0 [ 2006.965148] __tcp_retransmit_skb+0x174/0x860 [ 2006.969499] ? cubictcp_cwnd_event+0x40/0x40 [ 2006.973769] tcp_retransmit_skb+0x14/0xb0 ... Fixes: aa626da ("iavf: Detach device during reset task") Cc: Jacob Keller <jacob.e.keller@intel.com> Cc: Patryk Piotrowski <patryk.piotrowski@intel.com> Cc: SlawomirX Laba <slawomirx.laba@intel.com> Signed-off-by: Ivan Vecera <ivecera@redhat.com> Reviewed-by: Jacob Keller <jacob.e.keller@intel.com> Reviewed-by: Leon Romanovsky <leonro@nvidia.com> Tested-by: Konrad Jankowski <konrad0.jankowski@intel.com> Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>

…kernel/git/at91/linux into arm/fixes AT91 fixes for 6.1 #2 It contains: - fix UDC on at91sam9g20ek boards by adding vbus pin * tag 'at91-fixes-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux: ARM: dts: at91: sam9g20ek: enable udc vbus gpio pinctrl Link: https://lore.kernel.org/r/20221118131205.301662-1-claudiu.beznea@microchip.com Signed-off-by: Arnd Bergmann <arnd@arndb.de>

ldev->lock is used to serialize lag change operations. Since multiport eswtich functionality was added, we now change the mode dynamically. However, acquiring ldev->lock is not allowed as it could possibly lead to a deadlock as reported by the lockdep mechanism. [ 836.154963] WARNING: possible circular locking dependency detected [ 836.155850] 5.19.0-rc5_net_56b7df2 #1 Not tainted [ 836.156549] ------------------------------------------------------ [ 836.157418] handler1/12198 is trying to acquire lock: [ 836.158178] ffff888187d52b58 (&ldev->lock){+.+.}-{3:3}, at: mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.159575] [ 836.159575] but task is already holding lock: [ 836.160474] ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 836.161669] which lock already depends on the new lock. [ 836.162905] [ 836.162905] the existing dependency chain (in reverse order) is: [ 836.164008] -> #3 (&block->cb_lock){++++}-{3:3}: [ 836.164946] down_write+0x25/0x60 [ 836.165548] tcf_block_get_ext+0x1c6/0x5d0 [ 836.166253] ingress_init+0x74/0xa0 [sch_ingress] [ 836.167028] qdisc_create.constprop.0+0x130/0x5e0 [ 836.167805] tc_modify_qdisc+0x481/0x9f0 [ 836.168490] rtnetlink_rcv_msg+0x16e/0x5a0 [ 836.169189] netlink_rcv_skb+0x4e/0xf0 [ 836.169861] netlink_unicast+0x190/0x250 [ 836.170543] netlink_sendmsg+0x243/0x4b0 [ 836.171226] sock_sendmsg+0x33/0x40 [ 836.171860] ____sys_sendmsg+0x1d1/0x1f0 [ 836.172535] ___sys_sendmsg+0xab/0xf0 [ 836.173183] __sys_sendmsg+0x51/0x90 [ 836.173836] do_syscall_64+0x3d/0x90 [ 836.174471] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.175282] [ 836.175282] -> #2 (rtnl_mutex){+.+.}-{3:3}: [ 836.176190] __mutex_lock+0x6b/0xf80 [ 836.176830] register_netdevice_notifier+0x21/0x120 [ 836.177631] rtnetlink_init+0x2d/0x1e9 [ 836.178289] netlink_proto_init+0x163/0x179 [ 836.178994] do_one_initcall+0x63/0x300 [ 836.179672] kernel_init_freeable+0x2cb/0x31b [ 836.180403] kernel_init+0x17/0x140 [ 836.181035] ret_from_fork+0x1f/0x30 [ 836.181687] -> #1 (pernet_ops_rwsem){+.+.}-{3:3}: [ 836.182628] down_write+0x25/0x60 [ 836.183235] unregister_netdevice_notifier+0x1c/0xb0 [ 836.184029] mlx5_ib_roce_cleanup+0x94/0x120 [mlx5_ib] [ 836.184855] __mlx5_ib_remove+0x35/0x60 [mlx5_ib] [ 836.185637] mlx5_eswitch_unregister_vport_reps+0x22f/0x440 [mlx5_core] [ 836.186698] auxiliary_bus_remove+0x18/0x30 [ 836.187409] device_release_driver_internal+0x1f6/0x270 [ 836.188253] bus_remove_device+0xef/0x160 [ 836.188939] device_del+0x18b/0x3f0 [ 836.189562] mlx5_rescan_drivers_locked+0xd6/0x2d0 [mlx5_core] [ 836.190516] mlx5_lag_remove_devices+0x69/0xe0 [mlx5_core] [ 836.191414] mlx5_do_bond_work+0x441/0x620 [mlx5_core] [ 836.192278] process_one_work+0x25c/0x590 [ 836.192963] worker_thread+0x4f/0x3d0 [ 836.193609] kthread+0xcb/0xf0 [ 836.194189] ret_from_fork+0x1f/0x30 [ 836.194826] -> #0 (&ldev->lock){+.+.}-{3:3}: [ 836.195734] __lock_acquire+0x15b8/0x2a10 [ 836.196426] lock_acquire+0xce/0x2d0 [ 836.197057] __mutex_lock+0x6b/0xf80 [ 836.197708] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.198575] tc_act_parse_mirred+0x25b/0x800 [mlx5_core] [ 836.199467] parse_tc_actions+0x168/0x5a0 [mlx5_core] [ 836.200340] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core] [ 836.201241] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core] [ 836.202187] tc_setup_cb_add+0xd7/0x200 [ 836.202856] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 836.203739] fl_change+0xbbe/0x1730 [cls_flower] [ 836.204501] tc_new_tfilter+0x407/0xd90 [ 836.205168] rtnetlink_rcv_msg+0x406/0x5a0 [ 836.205877] netlink_rcv_skb+0x4e/0xf0 [ 836.206535] netlink_unicast+0x190/0x250 [ 836.207217] netlink_sendmsg+0x243/0x4b0 [ 836.207915] sock_sendmsg+0x33/0x40 [ 836.208538] ____sys_sendmsg+0x1d1/0x1f0 [ 836.209219] ___sys_sendmsg+0xab/0xf0 [ 836.209878] __sys_sendmsg+0x51/0x90 [ 836.210510] do_syscall_64+0x3d/0x90 [ 836.211137] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.211954] other info that might help us debug this: [ 836.213174] Chain exists of: [ 836.213174] &ldev->lock --> rtnl_mutex --> &block->cb_lock 836.214650] Possible unsafe locking scenario: [ 836.214650] [ 836.215574] CPU0 CPU1 [ 836.216255] ---- ---- [ 836.216943] lock(&block->cb_lock); [ 836.217518] lock(rtnl_mutex); [ 836.218348] lock(&block->cb_lock); [ 836.219212] lock(&ldev->lock); [ 836.219758] [ 836.219758] *** DEADLOCK *** [ 836.219758] [ 836.220747] 2 locks held by handler1/12198: [ 836.221390] #0: ffff8881d4de2930 (&block->cb_lock){++++}-{3:3}, at: tc_setup_cb_add+0x5b/0x200 [ 836.222646] #1: ffff88810c9a92c0 (&esw->mode_lock){++++}-{3:3}, at: mlx5_esw_hold+0x39/0x50 [mlx5_core] [ 836.224063] stack backtrace: [ 836.224799] CPU: 6 PID: 12198 Comm: handler1 Not tainted 5.19.0-rc5_net_56b7df2 #1 [ 836.225923] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 836.227476] Call Trace: [ 836.227929] <TASK> [ 836.228332] dump_stack_lvl+0x57/0x7d [ 836.228924] check_noncircular+0x104/0x120 [ 836.229562] __lock_acquire+0x15b8/0x2a10 [ 836.230201] lock_acquire+0xce/0x2d0 [ 836.230776] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.231614] ? find_held_lock+0x2b/0x80 [ 836.232221] __mutex_lock+0x6b/0xf80 [ 836.232799] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.233636] ? mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.234451] ? xa_load+0xc3/0x190 [ 836.234995] mlx5_lag_do_mirred+0x3b/0x70 [mlx5_core] [ 836.235803] tc_act_parse_mirred+0x25b/0x800 [mlx5_core] [ 836.236636] ? tc_act_can_offload_mirred+0x135/0x210 [mlx5_core] [ 836.237550] parse_tc_actions+0x168/0x5a0 [mlx5_core] [ 836.238364] __mlx5e_add_fdb_flow+0x263/0x480 [mlx5_core] [ 836.239202] mlx5e_configure_flower+0x8a0/0x1820 [mlx5_core] [ 836.240076] ? lock_acquire+0xce/0x2d0 [ 836.240668] ? tc_setup_cb_add+0x5b/0x200 [ 836.241294] tc_setup_cb_add+0xd7/0x200 [ 836.241917] fl_hw_replace_filter+0x14c/0x1f0 [cls_flower] [ 836.242709] fl_change+0xbbe/0x1730 [cls_flower] [ 836.243408] tc_new_tfilter+0x407/0xd90 [ 836.244043] ? tc_del_tfilter+0x880/0x880 [ 836.244672] rtnetlink_rcv_msg+0x406/0x5a0 [ 836.245310] ? netlink_deliver_tap+0x7a/0x4b0 [ 836.245991] ? if_nlmsg_stats_size+0x2b0/0x2b0 [ 836.246675] netlink_rcv_skb+0x4e/0xf0 [ 836.258046] netlink_unicast+0x190/0x250 [ 836.258669] netlink_sendmsg+0x243/0x4b0 [ 836.259288] sock_sendmsg+0x33/0x40 [ 836.259857] ____sys_sendmsg+0x1d1/0x1f0 [ 836.260473] ___sys_sendmsg+0xab/0xf0 [ 836.261064] ? lock_acquire+0xce/0x2d0 [ 836.261669] ? find_held_lock+0x2b/0x80 [ 836.262272] ? __fget_files+0xb9/0x190 [ 836.262871] ? __fget_files+0xd3/0x190 [ 836.263462] __sys_sendmsg+0x51/0x90 [ 836.264064] do_syscall_64+0x3d/0x90 [ 836.264652] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 836.265425] RIP: 0033:0x7fdbe5e2677d [ 836.266012] Code: 28 89 54 24 1c 48 89 74 24 10 89 7c 24 08 e8 ba ee ff ff 8b 54 24 1c 48 8b 74 24 10 41 89 c0 8b 7c 24 08 b8 2e 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 33 44 89 c7 48 89 44 24 08 e8 ee ee ff ff 48 [ 836.268485] RSP: 002b:00007fdbe48a75a0 EFLAGS: 00000293 ORIG_RAX: 000000000000002e [ 836.269598] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fdbe5e2677d [ 836.270576] RDX: 0000000000000000 RSI: 00007fdbe48a7640 RDI: 000000000000003c [ 836.271565] RBP: 00007fdbe48a8368 R08: 0000000000000000 R09: 0000000000000000 [ 836.272546] R10: 00007fdbe48a84b0 R11: 0000000000000293 R12: 0000557bd17dc860 [ 836.273527] R13: 0000000000000000 R14: 0000557bd17dc860 R15: 00007fdbe48a7640 [ 836.274521] </TASK> To avoid using mode holding ldev->lock in the configure flow, we queue a work to the lag workqueue and cease wait on a completion object. In addition, we remove the lock from mlx5_lag_do_mirred() since it is not really protecting anything. It should be noted that an actual deadlock has not been observed. Signed-off-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Mark Bloch <mbloch@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>

When logging an inode in full mode, or when logging xattrs or when logging the dir index items of a directory, we are modifying the log tree while holding a read lock on a leaf from the fs/subvolume tree. This can lead to a deadlock in rare circumstances, but it is a real possibility, and it was recently reported by syzbot with the following trace from lockdep: WARNING: possible circular locking dependency detected 6.1.0-rc5-next-20221116-syzkaller #0 Not tainted ------------------------------------------------------ syz-executor.1/16154 is trying to acquire lock: ffff88807e3084a0 (&delayed_node->mutex){+.+.}-{3:3}, at: __btrfs_release_delayed_node.part.0+0xa1/0xf30 fs/btrfs/delayed-inode.c:256 but task is already holding lock: ffff88807df33078 (btrfs-log-00){++++}-{3:3}, at: __btrfs_tree_lock+0x32/0x3d0 fs/btrfs/locking.c:197 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (btrfs-log-00){++++}-{3:3}: down_read_nested+0x9e/0x450 kernel/locking/rwsem.c:1634 __btrfs_tree_read_lock+0x32/0x350 fs/btrfs/locking.c:135 btrfs_tree_read_lock fs/btrfs/locking.c:141 [inline] btrfs_read_lock_root_node+0x82/0x3a0 fs/btrfs/locking.c:280 btrfs_search_slot_get_root fs/btrfs/ctree.c:1678 [inline] btrfs_search_slot+0x3ca/0x2c70 fs/btrfs/ctree.c:1998 btrfs_lookup_csum+0x116/0x3f0 fs/btrfs/file-item.c:209 btrfs_csum_file_blocks+0x40e/0x1370 fs/btrfs/file-item.c:1021 log_csums.isra.0+0x244/0x2d0 fs/btrfs/tree-log.c:4258 copy_items.isra.0+0xbfb/0xed0 fs/btrfs/tree-log.c:4403 copy_inode_items_to_log+0x13d6/0x1d90 fs/btrfs/tree-log.c:5873 btrfs_log_inode+0xb19/0x4680 fs/btrfs/tree-log.c:6495 btrfs_log_inode_parent+0x890/0x2a20 fs/btrfs/tree-log.c:6982 btrfs_log_dentry_safe+0x59/0x80 fs/btrfs/tree-log.c:7083 btrfs_sync_file+0xa41/0x13c0 fs/btrfs/file.c:1921 vfs_fsync_range+0x13e/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2856 [inline] iomap_dio_complete+0x73a/0x920 fs/iomap/direct-io.c:128 btrfs_direct_write fs/btrfs/file.c:1536 [inline] btrfs_do_write_iter+0xba2/0x1470 fs/btrfs/file.c:1668 call_write_iter include/linux/fs.h:2160 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_iter_write+0x74/0xa0 fs/read_write.c:902 iter_file_splice_write+0x745/0xc90 fs/splice.c:686 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x114/0x180 fs/splice.c:931 splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886 do_splice_direct+0x1ab/0x280 fs/splice.c:974 do_sendfile+0xb19/0x1270 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x259/0x2c0 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd -> #1 (btrfs-tree-00){++++}-{3:3}: __lock_release kernel/locking/lockdep.c:5382 [inline] lock_release+0x371/0x810 kernel/locking/lockdep.c:5688 up_write+0x2a/0x520 kernel/locking/rwsem.c:1614 btrfs_tree_unlock_rw fs/btrfs/locking.h:189 [inline] btrfs_unlock_up_safe+0x1e3/0x290 fs/btrfs/locking.c:238 search_leaf fs/btrfs/ctree.c:1832 [inline] btrfs_search_slot+0x265e/0x2c70 fs/btrfs/ctree.c:2074 btrfs_insert_empty_items+0xbd/0x1c0 fs/btrfs/ctree.c:4133 btrfs_insert_delayed_item+0x826/0xfa0 fs/btrfs/delayed-inode.c:746 btrfs_insert_delayed_items fs/btrfs/delayed-inode.c:824 [inline] __btrfs_commit_inode_delayed_items fs/btrfs/delayed-inode.c:1111 [inline] __btrfs_run_delayed_items+0x280/0x590 fs/btrfs/delayed-inode.c:1153 flush_space+0x147/0xe90 fs/btrfs/space-info.c:728 btrfs_async_reclaim_metadata_space+0x541/0xc10 fs/btrfs/space-info.c:1086 process_one_work+0x9bf/0x1710 kernel/workqueue.c:2289 worker_thread+0x669/0x1090 kernel/workqueue.c:2436 kthread+0x2e8/0x3a0 kernel/kthread.c:376 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:308 -> #0 (&delayed_node->mutex){+.+.}-{3:3}: check_prev_add kernel/locking/lockdep.c:3097 [inline] check_prevs_add kernel/locking/lockdep.c:3216 [inline] validate_chain kernel/locking/lockdep.c:3831 [inline] __lock_acquire+0x2a43/0x56d0 kernel/locking/lockdep.c:5055 lock_acquire kernel/locking/lockdep.c:5668 [inline] lock_acquire+0x1e3/0x630 kernel/locking/lockdep.c:5633 __mutex_lock_common kernel/locking/mutex.c:603 [inline] __mutex_lock+0x12f/0x1360 kernel/locking/mutex.c:747 __btrfs_release_delayed_node.part.0+0xa1/0xf30 fs/btrfs/delayed-inode.c:256 __btrfs_release_delayed_node fs/btrfs/delayed-inode.c:251 [inline] btrfs_release_delayed_node fs/btrfs/delayed-inode.c:281 [inline] btrfs_remove_delayed_node+0x52/0x60 fs/btrfs/delayed-inode.c:1285 btrfs_evict_inode+0x511/0xf30 fs/btrfs/inode.c:5554 evict+0x2ed/0x6b0 fs/inode.c:664 dispose_list+0x117/0x1e0 fs/inode.c:697 prune_icache_sb+0xeb/0x150 fs/inode.c:896 super_cache_scan+0x391/0x590 fs/super.c:106 do_shrink_slab+0x464/0xce0 mm/vmscan.c:843 shrink_slab_memcg mm/vmscan.c:912 [inline] shrink_slab+0x388/0x660 mm/vmscan.c:991 shrink_node_memcgs mm/vmscan.c:6088 [inline] shrink_node+0x93d/0x1f30 mm/vmscan.c:6117 shrink_zones mm/vmscan.c:6355 [inline] do_try_to_free_pages+0x3b4/0x17a0 mm/vmscan.c:6417 try_to_free_mem_cgroup_pages+0x3a4/0xa70 mm/vmscan.c:6732 reclaim_high.constprop.0+0x182/0x230 mm/memcontrol.c:2393 mem_cgroup_handle_over_high+0x190/0x520 mm/memcontrol.c:2578 try_charge_memcg+0xe0c/0x12f0 mm/memcontrol.c:2816 try_charge mm/memcontrol.c:2827 [inline] charge_memcg+0x90/0x3b0 mm/memcontrol.c:6889 __mem_cgroup_charge+0x2b/0x90 mm/memcontrol.c:6910 mem_cgroup_charge include/linux/memcontrol.h:667 [inline] __filemap_add_folio+0x615/0xf80 mm/filemap.c:852 filemap_add_folio+0xaf/0x1e0 mm/filemap.c:934 __filemap_get_folio+0x389/0xd80 mm/filemap.c:1976 pagecache_get_page+0x2e/0x280 mm/folio-compat.c:104 find_or_create_page include/linux/pagemap.h:612 [inline] alloc_extent_buffer+0x2b9/0x1580 fs/btrfs/extent_io.c:4588 btrfs_init_new_buffer fs/btrfs/extent-tree.c:4869 [inline] btrfs_alloc_tree_block+0x2e1/0x1320 fs/btrfs/extent-tree.c:4988 __btrfs_cow_block+0x3b2/0x1420 fs/btrfs/ctree.c:440 btrfs_cow_block+0x2fa/0x950 fs/btrfs/ctree.c:595 btrfs_search_slot+0x11b0/0x2c70 fs/btrfs/ctree.c:2038 btrfs_update_root+0xdb/0x630 fs/btrfs/root-tree.c:137 update_log_root fs/btrfs/tree-log.c:2841 [inline] btrfs_sync_log+0xbfb/0x2870 fs/btrfs/tree-log.c:3064 btrfs_sync_file+0xdb9/0x13c0 fs/btrfs/file.c:1947 vfs_fsync_range+0x13e/0x230 fs/sync.c:188 generic_write_sync include/linux/fs.h:2856 [inline] iomap_dio_complete+0x73a/0x920 fs/iomap/direct-io.c:128 btrfs_direct_write fs/btrfs/file.c:1536 [inline] btrfs_do_write_iter+0xba2/0x1470 fs/btrfs/file.c:1668 call_write_iter include/linux/fs.h:2160 [inline] do_iter_readv_writev+0x20b/0x3b0 fs/read_write.c:735 do_iter_write+0x182/0x700 fs/read_write.c:861 vfs_iter_write+0x74/0xa0 fs/read_write.c:902 iter_file_splice_write+0x745/0xc90 fs/splice.c:686 do_splice_from fs/splice.c:764 [inline] direct_splice_actor+0x114/0x180 fs/splice.c:931 splice_direct_to_actor+0x335/0x8a0 fs/splice.c:886 do_splice_direct+0x1ab/0x280 fs/splice.c:974 do_sendfile+0xb19/0x1270 fs/read_write.c:1255 __do_sys_sendfile64 fs/read_write.c:1323 [inline] __se_sys_sendfile64 fs/read_write.c:1309 [inline] __x64_sys_sendfile64+0x259/0x2c0 fs/read_write.c:1309 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x39/0xb0 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd other info that might help us debug this: Chain exists of: &delayed_node->mutex --> btrfs-tree-00 --> btrfs-log-00 Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(btrfs-log-00); lock(btrfs-tree-00); lock(btrfs-log-00); lock(&delayed_node->mutex); Holding a read lock on a leaf from a fs/subvolume tree creates a nasty lock dependency when we are COWing extent buffers for the log tree and we have two tasks modifying the log tree, with each one in one of the following 2 scenarios: 1) Modifying the log tree triggers an extent buffer allocation while holding a write lock on a parent extent buffer from the log tree. Allocating the pages for an extent buffer, or the extent buffer struct, can trigger inode eviction and finally the inode eviction will trigger a release/remove of a delayed node, which requires taking the delayed node's mutex; 2) Allocating a metadata extent for a log tree can trigger the async reclaim thread and make us wait for it to release enough space and unblock our reservation ticket. The reclaim thread can start flushing delayed items, and that in turn results in the need to lock delayed node mutexes and in the need to write lock extent buffers of a subvolume tree - all this while holding a write lock on the parent extent buffer in the log tree. So one task in scenario 1) running in parallel with another task in scenario 2) could lead to a deadlock, one wanting to lock a delayed node mutex while having a read lock on a leaf from the subvolume, while the other is holding the delayed node's mutex and wants to write lock the same subvolume leaf for flushing delayed items. Fix this by cloning the leaf of the fs/subvolume tree, release/unlock the fs/subvolume leaf and use the clone leaf instead. Reported-by: syzbot+9b7c21f486f5e7f8d029@syzkaller.appspotmail.com Link: https://lore.kernel.org/linux-btrfs/000000000000ccc93c05edc4d8cf@google.com/ CC: stable@vger.kernel.org # 6.0+ Reviewed-by: Josef Bacik <josef@toxicpanda.com> Signed-off-by: Filipe Manana <fdmanana@suse.com> Signed-off-by: David Sterba <dsterba@suse.com>

test_bpf tail call tests end up as: test_bpf: #0 Tail call leaf jited:1 85 PASS test_bpf: #1 Tail call 2 jited:1 111 PASS test_bpf: #2 Tail call 3 jited:1 145 PASS test_bpf: #3 Tail call 4 jited:1 170 PASS test_bpf: #4 Tail call load/store leaf jited:1 190 PASS test_bpf: #5 Tail call load/store jited:1 BUG: Unable to handle kernel data access on write at 0xf1b4e000 Faulting instruction address: 0xbe86b710 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=4K MMU=Hash PowerMac Modules linked in: test_bpf(+) CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ torvalds#195 Hardware name: PowerMac3,1 750CL 0x87210 PowerMac NIP: be86b710 LR: be857e88 CTR: be86b704 REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000 DAR: f1b4e000 DSISR: 42000000 GPR00: 00000001 f1b4dfe c11d2280 00000000 00000000 00000000 00000002 00000000 GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8 GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000 GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00 NIP [be86b710] 0xbe86b710 LR [be857e88] __run_one+0xec/0x264 [test_bpf] Call Trace: [f1b4dfe] [00000002] 0x2 (unreliable) Instruction dump: XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX ---[ end trace 0000000000000000 ]--- This is a tentative to write above the stack. The problem is encoutered with tests added by commit 38608ee ("bpf, tests: Add load store test case for tail call") This happens because tail call is done to a BPF prog with a different stack_depth. At the time being, the stack is kept as is when the caller tail calls its callee. But at exit, the callee restores the stack based on its own properties. Therefore here, at each run, r1 is erroneously increased by 32 - 16 = 16 bytes. This was done that way in order to pass the tail call count from caller to callee through the stack. As powerpc32 doesn't have a red zone in the stack, it was necessary the maintain the stack as is for the tail call. But it was not anticipated that the BPF frame size could be different. Let's take a new approach. Use register r4 to carry the tail call count during the tail call, and save it into the stack at function entry if required. This means the input parameter must be in r3, which is more correct as it is a 32 bits parameter, then tail call better match with normal BPF function entry, the down side being that we move that input parameter back and forth between r3 and r4. That can be optimised later. Doing that also has the advantage of maximising the common parts between tail calls and a normal function exit. With the fix, tail call tests are now successfull: test_bpf: #0 Tail call leaf jited:1 53 PASS test_bpf: #1 Tail call 2 jited:1 115 PASS test_bpf: #2 Tail call 3 jited:1 154 PASS test_bpf: #3 Tail call 4 jited:1 165 PASS test_bpf: #4 Tail call load/store leaf jited:1 101 PASS test_bpf: #5 Tail call load/store jited:1 141 PASS test_bpf: torvalds#6 Tail call error path, max count reached jited:1 994 PASS test_bpf: torvalds#7 Tail call count preserved across function calls jited:1 140975 PASS test_bpf: torvalds#8 Tail call error path, NULL target jited:1 110 PASS test_bpf: torvalds#9 Tail call error path, index out of range jited:1 69 PASS test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] Suggested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com> Fixes: 51c66ad ("powerpc/bpf: Implement extended BPF on PPC32") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Tested-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/757acccb7fbfc78efa42dcf3c974b46678198905.1669278887.git.christophe.leroy@csgroup.eu

Matt reported a splat at msk close time: BUG: sleeping function called from invalid context at net/mptcp/protocol.c:2877 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 155, name: packetdrill preempt_count: 201, expected: 0 RCU nest depth: 0, expected: 0 4 locks held by packetdrill/155: #0: ffff888001536990 (&sb->s_type->i_mutex_key#6){+.+.}-{3:3}, at: __sock_release (net/socket.c:650) #1: ffff88800b498130 (sk_lock-AF_INET){+.+.}-{0:0}, at: mptcp_close (net/mptcp/protocol.c:2973) #2: ffff88800b49a130 (sk_lock-AF_INET/1){+.+.}-{0:0}, at: __mptcp_close_ssk (net/mptcp/protocol.c:2363) #3: ffff88800b49a0b0 (slock-AF_INET){+...}-{2:2}, at: __lock_sock_fast (include/net/sock.h:1820) Preemption disabled at: 0x0 CPU: 1 PID: 155 Comm: packetdrill Not tainted 6.1.0-rc5 torvalds#365 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014 Call Trace: <TASK> dump_stack_lvl (lib/dump_stack.c:107 (discriminator 4)) __might_resched.cold (kernel/sched/core.c:9891) __mptcp_destroy_sock (include/linux/kernel.h:110) __mptcp_close (net/mptcp/protocol.c:2959) mptcp_subflow_queue_clean (include/net/sock.h:1777) __mptcp_close_ssk (net/mptcp/protocol.c:2363) mptcp_destroy_common (net/mptcp/protocol.c:3170) mptcp_destroy (include/net/sock.h:1495) __mptcp_destroy_sock (net/mptcp/protocol.c:2886) __mptcp_close (net/mptcp/protocol.c:2959) mptcp_close (net/mptcp/protocol.c:2974) inet_release (net/ipv4/af_inet.c:432) __sock_release (net/socket.c:651) sock_close (net/socket.c:1367) __fput (fs/file_table.c:320) task_work_run (kernel/task_work.c:181 (discriminator 1)) exit_to_user_mode_prepare (include/linux/resume_user_mode.h:49) syscall_exit_to_user_mode (kernel/entry/common.c:130) do_syscall_64 (arch/x86/entry/common.c:87) entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120) We can't call mptcp_close under the 'fast' socket lock variant, replace it with a sock_lock_nested() as the relevant code is already under the listening msk socket lock protection. Reported-by: Matthieu Baerts <matthieu.baerts@tessares.net> Closes: multipath-tcp/mptcp_net-next#316 Fixes: 30e51b9 ("mptcp: fix unreleased socket in accept queue") Signed-off-by: Paolo Abeni <pabeni@redhat.com> Reviewed-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Signed-off-by: Jakub Kicinski <kuba@kernel.org>

Wei Chen reported a NULL deref in sk_user_ns() [0][1], and Paolo diagnosed the root cause: in unix_diag_get_exact(), the newly allocated skb does not have sk. [2] We must get the user_ns from the NETLINK_CB(in_skb).sk and pass it to sk_diag_fill(). [0]: BUG: kernel NULL pointer dereference, address: 0000000000000270 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 12bbce067 P4D 12bbce067 PUD 12bc40067 PMD 0 Oops: 0000 [#1] PREEMPT SMP CPU: 0 PID: 27942 Comm: syz-executor.0 Not tainted 6.1.0-rc5-next-20221118 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-48-gd9c812dda519-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_user_ns include/net/sock.h:920 [inline] RIP: 0010:sk_diag_dump_uid net/unix/diag.c:119 [inline] RIP: 0010:sk_diag_fill+0x77d/0x890 net/unix/diag.c:170 Code: 89 ef e8 66 d4 2d fd c7 44 24 40 00 00 00 00 49 8d 7c 24 18 e8 54 d7 2d fd 49 8b 5c 24 18 48 8d bb 70 02 00 00 e8 43 d7 2d fd <48> 8b 9b 70 02 00 00 48 8d 7b 10 e8 33 d7 2d fd 48 8b 5b 10 48 8d RSP: 0018:ffffc90000d67968 EFLAGS: 00010246 RAX: ffff88812badaa48 RBX: 0000000000000000 RCX: ffffffff840d481d RDX: 0000000000000465 RSI: 0000000000000000 RDI: 0000000000000270 RBP: ffffc90000d679a8 R08: 0000000000000277 R09: 0000000000000000 R10: 0001ffffffffffff R11: 0001c90000d679a8 R12: ffff88812ac03800 R13: ffff88812c87c400 R14: ffff88812ae42210 R15: ffff888103026940 FS: 00007f08b4e6f700(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000270 CR3: 000000012c58b000 CR4: 00000000003506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: <TASK> unix_diag_get_exact net/unix/diag.c:285 [inline] unix_diag_handler_dump+0x3f9/0x500 net/unix/diag.c:317 __sock_diag_cmd net/core/sock_diag.c:235 [inline] sock_diag_rcv_msg+0x237/0x250 net/core/sock_diag.c:266 netlink_rcv_skb+0x13e/0x250 net/netlink/af_netlink.c:2564 sock_diag_rcv+0x24/0x40 net/core/sock_diag.c:277 netlink_unicast_kernel net/netlink/af_netlink.c:1330 [inline] netlink_unicast+0x5e9/0x6b0 net/netlink/af_netlink.c:1356 netlink_sendmsg+0x739/0x860 net/netlink/af_netlink.c:1932 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg net/socket.c:734 [inline] ____sys_sendmsg+0x38f/0x500 net/socket.c:2476 ___sys_sendmsg net/socket.c:2530 [inline] __sys_sendmsg+0x197/0x230 net/socket.c:2559 __do_sys_sendmsg net/socket.c:2568 [inline] __se_sys_sendmsg net/socket.c:2566 [inline] __x64_sys_sendmsg+0x42/0x50 net/socket.c:2566 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x2b/0x70 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x4697f9 Code: f7 d8 64 89 02 b8 ff ff ff ff c3 66 0f 1f 44 00 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 bc ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007f08b4e6ec48 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 000000000077bf80 RCX: 00000000004697f9 RDX: 0000000000000000 RSI: 00000000200001c0 RDI: 0000000000000003 RBP: 00000000004d29e9 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 000000000077bf80 R13: 0000000000000000 R14: 000000000077bf80 R15: 00007ffdb36bc6c0 </TASK> Modules linked in: CR2: 0000000000000270 [1]: https://lore.kernel.org/netdev/CAO4mrfdvyjFpokhNsiwZiP-wpdSD0AStcJwfKcKQdAALQ9_2Qw@mail.gmail.com/ [2]: https://lore.kernel.org/netdev/e04315e7c90d9a75613f3993c2baf2d344eef7eb.camel@redhat.com/ Fixes: cae9910 ("net: Add UNIX_DIAG_UID to Netlink UNIX socket diagnostics.") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Wei Chen <harperchen1110@gmail.com> Diagnosed-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>

QAT devices on Intel Sapphire Rapids and Emerald Rapids have a defect in address translation service (ATS). These devices may inadvertently issue ATS invalidation completion before posted writes initiated with translated address that utilized translations matching the invalidation address range, violating the invalidation completion ordering. This patch adds an extra device TLB invalidation for the affected devices, it is needed to ensure no more posted writes with translated address following the invalidation completion. Therefore, the ordering is preserved and data-corruption is prevented. Device TLBs are invalidated under the following six conditions: 1. Device driver does DMA API unmap IOVA 2. Device driver unbind a PASID from a process, sva_unbind_device() 3. PASID is torn down, after PASID cache is flushed. e.g. process exit_mmap() due to crash 4. Under SVA usage, called by mmu_notifier.invalidate_range() where VM has to free pages that were unmapped 5. userspace driver unmaps a DMA buffer 6. Cache invalidation in vSVA usage (upcoming) For #1 and #2, device drivers are responsible for stopping DMA traffic before unmap/unbind. For #3, iommu driver gets mmu_notifier to invalidate TLB the same way as normal user unmap which will do an extra invalidation. The dTLB invalidation after PASID cache flush does not need an extra invalidation. Therefore, we only need to deal with #4 and #5 in this patch. #1 is also covered by this patch due to common code path with #5. Tested-by: Yuzhang Luo <yuzhang.luo@intel.com> Reviewed-by: Ashok Raj <ashok.raj@intel.com> Reviewed-by: Kevin Tian <kevin.tian@intel.com> Signed-off-by: Jacob Pan <jacob.jun.pan@linux.intel.com> Link: https://lore.kernel.org/r/20221130062449.1360063-1-jacob.jun.pan@linux.intel.com Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com> Signed-off-by: Joerg Roedel <jroedel@suse.de>

When sending packets between nodes in netns, it calls tipc_lxc_xmit() for peer node to receive the packets where tipc_sk_mcast_rcv()/tipc_sk_rcv() might be called, and it's pretty much like in tipc_rcv(). Currently the local 'node rw lock' is held during calling tipc_lxc_xmit() to protect the peer_net not being freed by another thread. However, when receiving these packets, tipc_node_add_conn() might be called where the peer 'node rw lock' is acquired. Then a dead lock warning is triggered by lockdep detector, although it is not a real dead lock: WARNING: possible recursive locking detected -------------------------------------------- conn_server/1086 is trying to acquire lock: ffff8880065cb020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_add_conn.cold.76+0xaa/0x211 [tipc] but task is already holding lock: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_xmit+0x285/0xb30 [tipc] other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(&n->lock#2); lock(&n->lock#2); *** DEADLOCK *** May be due to missing lock nesting notation 4 locks held by conn_server/1086: #0: ffff8880036d1e40 (sk_lock-AF_TIPC){+.+.}-{0:0}, \ at: tipc_accept+0x9c0/0x10b0 [tipc] #1: ffff8880036d5f80 (sk_lock-AF_TIPC/1){+.+.}-{0:0}, \ at: tipc_accept+0x363/0x10b0 [tipc] #2: ffff8880065cd020 (&n->lock#2){++--}-{2:2}, \ at: tipc_node_xmit+0x285/0xb30 [tipc] #3: ffff888012e13370 (slock-AF_TIPC){+...}-{2:2}, \ at: tipc_sk_rcv+0x2da/0x1b40 [tipc] Call Trace: <TASK> dump_stack_lvl+0x44/0x5b __lock_acquire.cold.77+0x1f2/0x3d7 lock_acquire+0x1d2/0x610 _raw_write_lock_bh+0x38/0x80 tipc_node_add_conn.cold.76+0xaa/0x211 [tipc] tipc_sk_finish_conn+0x21e/0x640 [tipc] tipc_sk_filter_rcv+0x147b/0x3030 [tipc] tipc_sk_rcv+0xbb4/0x1b40 [tipc] tipc_lxc_xmit+0x225/0x26b [tipc] tipc_node_xmit.cold.82+0x4a/0x102 [tipc] __tipc_sendstream+0x879/0xff0 [tipc] tipc_accept+0x966/0x10b0 [tipc] do_accept+0x37d/0x590 This patch avoids this warning by not holding the 'node rw lock' before calling tipc_lxc_xmit(). As to protect the 'peer_net', rcu_read_lock() should be enough, as in cleanup_net() when freeing the netns, it calls synchronize_rcu() before the free is continued. Also since tipc_lxc_xmit() is like the RX path in tipc_rcv(), it makes sense to call it under rcu_read_lock(). Note that the right lock order must be: rcu_read_lock(); tipc_node_read_lock(n); tipc_node_read_unlock(n); tipc_lxc_xmit(); rcu_read_unlock(); instead of: tipc_node_read_lock(n); rcu_read_lock(); tipc_node_read_unlock(n); tipc_lxc_xmit(); rcu_read_unlock(); and we have to call tipc_node_read_lock/unlock() twice in tipc_node_xmit(). Fixes: f73b128 ("tipc: improve throughput between nodes in netns") Reported-by: Shuang Li <shuali@redhat.com> Signed-off-by: Xin Long <lucien.xin@gmail.com> Link: https://lore.kernel.org/r/5bdd1f8fee9db695cfff4528a48c9b9d0523fb00.1670110641.git.lucien.xin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>

[ Upstream commit b18cba0 ] Commit 9130b8d ("SUNRPC: allow for upcalls for the same uid but different gss service") introduced `auth` argument to __gss_find_upcall(), but in gss_pipe_downcall() it was left as NULL since it (and auth->service) was not (yet) determined. When multiple upcalls with the same uid and different service are ongoing, it could happen that __gss_find_upcall(), which returns the first match found in the pipe->in_downcall list, could not find the correct gss_msg corresponding to the downcall we are looking for. Moreover, it might return a msg which is not sent to rpc.gssd yet. We could see mount.nfs process hung in D state with multiple mount.nfs are executed in parallel. The call trace below is of CentOS 7.9 kernel-3.10.0-1160.24.1.el7.x86_64 but we observed the same hang w/ elrepo kernel-ml-6.0.7-1.el7. PID: 71258 TASK: ffff91ebd4be0000 CPU: 36 COMMAND: "mount.nfs" #0 [ffff9203ca3234f8] __schedule at ffffffffa3b8899f #1 [ffff9203ca323580] schedule at ffffffffa3b88eb9 #2 [ffff9203ca323590] gss_cred_init at ffffffffc0355818 [auth_rpcgss] #3 [ffff9203ca323658] rpcauth_lookup_credcache at ffffffffc0421ebc [sunrpc] #4 [ffff9203ca3236d8] gss_lookup_cred at ffffffffc0353633 [auth_rpcgss] #5 [ffff9203ca3236e8] rpcauth_lookupcred at ffffffffc0421581 [sunrpc] torvalds#6 [ffff9203ca323740] rpcauth_refreshcred at ffffffffc04223d3 [sunrpc] torvalds#7 [ffff9203ca3237a0] call_refresh at ffffffffc04103dc [sunrpc] torvalds#8 [ffff9203ca3237b8] __rpc_execute at ffffffffc041e1c9 [sunrpc] torvalds#9 [ffff9203ca323820] rpc_execute at ffffffffc0420a48 [sunrpc] The scenario is like this. Let's say there are two upcalls for services A and B, A -> B in pipe->in_downcall, B -> A in pipe->pipe. When rpc.gssd reads pipe to get the upcall msg corresponding to service B from pipe->pipe and then writes the response, in gss_pipe_downcall the msg corresponding to service A will be picked because only uid is used to find the msg and it is before the one for B in pipe->in_downcall. And the process waiting for the msg corresponding to service A will be woken up. Actual scheduing of that process might be after rpc.gssd processes the next msg. In rpc_pipe_generic_upcall it clears msg->errno (for A). The process is scheduled to see gss_msg->ctx == NULL and gss_msg->msg.errno == 0, therefore it cannot break the loop in gss_create_upcall and is never woken up after that. This patch adds a simple check to ensure that a msg which is not sent to rpc.gssd yet is not chosen as the matching upcall upon receiving a downcall. Signed-off-by: minoura makoto <minoura@valinux.co.jp> Signed-off-by: Hiroshi Shimamoto <h-shimamoto@nec.com> Tested-by: Hiroshi Shimamoto <h-shimamoto@nec.com> Cc: Trond Myklebust <trondmy@hammerspace.com> Fixes: 9130b8d ("SUNRPC: allow for upcalls for same uid but different gss service") Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…ed_text_end" symbol on s/390 [ Upstream commit d8d85ce ] The test case perf lock contention dumps core on s390. Run the following commands: # ./perf lock record -- ./perf bench sched messaging # Running 'sched/messaging' benchmark: # 20 sender and receiver processes per group # 10 groups == 400 processes run Total time: 2.799 [sec] [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.073 MB perf.data (100 samples) ] # # ./perf lock contention Segmentation fault (core dumped) # The function call stack is lengthy, here are the top 5 functions: # gdb ./perf core.24048 GNU gdb (GDB) Fedora Linux 12.1-6.fc37 Core was generated by `./perf lock contention'. Program terminated with signal SIGSEGV, Segmentation fault. #0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356 3356 machine->sched.text_end = kmap->unmap_ip(kmap, sym->start); (gdb) where #0 0x00000000011dd25c in machine__is_lock_function (machine=0x3029e28, addr=1789230) at util/machine.c:3356 #1 0x000000000109f244 in callchain_id (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:957 #2 0x000000000109e094 in get_key_by_aggr_mode (key=0x3ffea4f7290, addr=27758136, evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:586 #3 0x000000000109f4d0 in report_lock_contention_begin_event (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1004 #4 0x00000000010a00ae in evsel__process_contention_begin (evsel=0x30313e0, sample=0x3ffea4f77d0) at builtin-lock.c:1254 #5 0x00000000010a0e14 in process_sample_event (tool=0x3ffea4f8480, event=0x3ff85601ef8, sample=0x3ffea4f77d0, evsel=0x30313e0, machine=0x3029e28) at builtin-lock.c:1464 ..... The issue is in function machine__is_lock_function() in file ./util/machine.c lines 3355: /* should not fail from here */ sym = machine__find_kernel_symbol_by_name(machine, "__sched_text_end", &kmap); machine->sched.text_end = kmap->unmap_ip(kmap, sym->start) On s390 the symbol __sched_text_end is *NOT* in the symbol list and the resulting pointer sym is set to NULL. The sym->start is then a NULL pointer access and generates the core dump. The reason why __sched_text_end is not in the symbol list on s390 is simple: When the symbol list is created at perf start up with function calls dso__load +--> dso__load_vmlinux_path +--> dso__load_vmlinux +--> dso__load_sym +--> dso__load_sym_internal (reads kernel symbols) +--> symbols__fixup_end +--> symbols__fixup_duplicate The issue is in function symbols__fixup_duplicate(). It deletes all symbols with have the same address. On s390: # nm -g ~/linux/vmlinux| fgrep c68390 0000000000c68390 T __cpuidle_text_start 0000000000c68390 T __sched_text_end # two symbols have identical addresses and __sched_text_end is considered duplicate (in ascending sort order) and removed from the symbol list. Therefore it is missing and an invalid pointer reference occurs. The code checks for symbol __sched_text_start and when it exists assumes symbol __sched_text_end is also in the symbol table. However this is not the case on s390. Same situation exists for symbol __lock_text_start: 0000000000c68770 T __cpuidle_text_end 0000000000c68770 T __lock_text_start This symbol is also removed from the symbol table but used in function machine__is_lock_function(). To fix this and keep duplicate symbols in the symbol table, set symbol_conf.allow_aliases to true. This prevents the removal of duplicate symbols in function symbols__fixup_duplicate(). Output After: # ./perf lock contention contended total wait max wait avg wait type caller 48 124.39 ms 123.99 ms 2.59 ms rwsem:W unlink_anon_vmas+0x24a 47 83.68 ms 83.26 ms 1.78 ms rwsem:W free_pgtables+0x132 5 41.22 us 10.55 us 8.24 us rwsem:W free_pgtables+0x140 4 40.12 us 20.55 us 10.03 us rwsem:W copy_process+0x1ac8 # Fixes: 0d2997f ("perf lock: Look up callchain for the contended locks") Signed-off-by: Thomas Richter <tmricht@linux.ibm.com> Acked-by: Namhyung Kim <namhyung@kernel.org> Cc: Heiko Carstens <hca@linux.ibm.com> Cc: Sumanth Korikkar <sumanthk@linux.ibm.com> Cc: Sven Schnelle <svens@linux.ibm.com> Cc: Vasily Gorbik <gor@linux.ibm.com> Link: https://lore.kernel.org/r/20221230102627.2410847-1-tmricht@linux.ibm.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

commit cf12983 upstream. When a match has been made to the nth duplicate symbol, return success not error. Example: Before: $ cat file.c cat: file.c: No such file or directory $ cat file1.c #include <stdio.h> static void func(void) { printf("First func\n"); } void other(void); int main() { func(); other(); return 0; } $ cat file2.c #include <stdio.h> static void func(void) { printf("Second func\n"); } void other(void) { func(); } $ gcc -Wall -Wextra -o test file1.c file2.c $ perf record -e intel_pt//u --filter 'filter func @ ./test' -- ./test Multiple symbols with name 'func' #1 0x1149 l func which is near main #2 0x1179 l func which is near other Disambiguate symbol name by inserting #n after the name e.g. func #2 Or select a global symbol by inserting #0 or #g or #G Failed to parse address filter: 'filter func @ ./test' Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>] Where multiple filters are separated by space or comma. $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test Failed to parse address filter: 'filter func #2 @ ./test' Filter format is: filter|start|stop|tracestop <start symbol or address> [/ <end symbol or size>] [@<file name>] Where multiple filters are separated by space or comma. After: $ perf record -e intel_pt//u --filter 'filter func #2 @ ./test' -- ./test First func Second func [ perf record: Woken up 1 times to write data ] [ perf record: Captured and wrote 0.016 MB perf.data ] $ perf script --itrace=b -Ftime,flags,ip,sym,addr --ns 1231062.526977619: tr strt 0 [unknown] => 558495708179 func 1231062.526977619: tr end call 558495708188 func => 558495708050 _init 1231062.526979286: tr strt 0 [unknown] => 55849570818d func 1231062.526979286: tr end return 55849570818f func => 55849570819d other Fixes: 1b36c03 ("perf record: Add support for using symbols in address filters") Reported-by: Dmitrii Dolgov <9erthalion6@gmail.com> Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Tested-by: Dmitry Dolgov <9erthalion6@gmail.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Ian Rogers <irogers@google.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: stable@vger.kernel.org Link: https://lore.kernel.org/r/20230110185659.15979-1-adrian.hunter@intel.com Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 76d588d upstream. Current imc-pmu code triggers a WARNING with CONFIG_DEBUG_ATOMIC_SLEEP and CONFIG_PROVE_LOCKING enabled, while running a thread_imc event. Command to trigger the warning: # perf stat -e thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ sleep 5 Performance counter stats for 'sleep 5': 0 thread_imc/CPM_CS_FROM_L4_MEM_X_DPTEG/ 5.002117947 seconds time elapsed 0.000131000 seconds user 0.001063000 seconds sys Below is snippet of the warning in dmesg: BUG: sleeping function called from invalid context at kernel/locking/mutex.c:580 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 2869, name: perf-exec preempt_count: 2, expected: 0 4 locks held by perf-exec/2869: #0: c00000004325c540 (&sig->cred_guard_mutex){+.+.}-{3:3}, at: bprm_execve+0x64/0xa90 #1: c00000004325c5d8 (&sig->exec_update_lock){++++}-{3:3}, at: begin_new_exec+0x460/0xef0 #2: c0000003fa99d4e0 (&cpuctx_lock){-...}-{2:2}, at: perf_event_exec+0x290/0x510 #3: c000000017ab8418 (&ctx->lock){....}-{2:2}, at: perf_event_exec+0x29c/0x510 irq event stamp: 4806 hardirqs last enabled at (4805): [<c000000000f65b94>] _raw_spin_unlock_irqrestore+0x94/0xd0 hardirqs last disabled at (4806): [<c0000000003fae44>] perf_event_exec+0x394/0x510 softirqs last enabled at (0): [<c00000000013c404>] copy_process+0xc34/0x1ff0 softirqs last disabled at (0): [<0000000000000000>] 0x0 CPU: 36 PID: 2869 Comm: perf-exec Not tainted 6.2.0-rc2-00011-g1247637727f2 torvalds#61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV Call Trace: dump_stack_lvl+0x98/0xe0 (unreliable) __might_resched+0x2f8/0x310 __mutex_lock+0x6c/0x13f0 thread_imc_event_add+0xf4/0x1b0 event_sched_in+0xe0/0x210 merge_sched_in+0x1f0/0x600 visit_groups_merge.isra.92.constprop.166+0x2bc/0x6c0 ctx_flexible_sched_in+0xcc/0x140 ctx_sched_in+0x20c/0x2a0 ctx_resched+0x104/0x1c0 perf_event_exec+0x340/0x510 begin_new_exec+0x730/0xef0 load_elf_binary+0x3f8/0x1e10 ... do not call blocking ops when !TASK_RUNNING; state=2001 set at [<00000000fd63e7cf>] do_nanosleep+0x60/0x1a0 WARNING: CPU: 36 PID: 2869 at kernel/sched/core.c:9912 __might_sleep+0x9c/0xb0 CPU: 36 PID: 2869 Comm: sleep Tainted: G W 6.2.0-rc2-00011-g1247637727f2 torvalds#61 Hardware name: 8375-42A POWER9 0x4e1202 opal:v7.0-16-g9b85f7d961 PowerNV NIP: c000000000194a1c LR: c000000000194a18 CTR: c000000000a78670 REGS: c00000004d2134e0 TRAP: 0700 Tainted: G W (6.2.0-rc2-00011-g1247637727f2) MSR: 9000000000021033 <SF,HV,ME,IR,DR,RI,LE> CR: 48002824 XER: 00000000 CFAR: c00000000013fb64 IRQMASK: 1 The above warning triggered because the current imc-pmu code uses mutex lock in interrupt disabled sections. The function mutex_lock() internally calls __might_resched(), which will check if IRQs are disabled and in case IRQs are disabled, it will trigger the warning. Fix the issue by changing the mutex lock to spinlock. Fixes: 8f95faa ("powerpc/powernv: Detect and create IMC device") Reported-by: Michael Petlan <mpetlan@redhat.com> Reported-by: Peter Zijlstra <peterz@infradead.org> Signed-off-by: Kajol Jain <kjain@linux.ibm.com> [mpe: Fix comments, trim oops in change log, add reported-by tags] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20230106065157.182648-1-kjain@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 0e67815 upstream. Patch series "mm/hugetlb: uffd-wp fixes for hugetlb_change_protection()". Playing with virtio-mem and background snapshots (using uffd-wp) on hugetlb in QEMU, I managed to trigger a VM_BUG_ON(). Looking into the details, hugetlb_change_protection() seems to not handle uffd-wp correctly in all cases. Patch #1 fixes my test case. I don't have reproducers for patch #2, as it requires running into migration entries. I did not yet check in detail yet if !hugetlb code requires similar care. This patch (of 2): There are two problematic cases when stumbling over a PTE marker in hugetlb_change_protection(): (1) We protect an uffd-wp PTE marker a second time using uffd-wp: we will end up in the "!huge_pte_none(pte)" case and mess up the PTE marker. (2) We unprotect a uffd-wp PTE marker: we will similarly end up in the "!huge_pte_none(pte)" case even though we cleared the PTE, because the "pte" variable is stale. We'll mess up the PTE marker. For example, if we later stumble over such a "wrongly modified" PTE marker, we'll treat it like a present PTE that maps some garbage page. This can, for example, be triggered by mapping a memfd backed by huge pages, registering uffd-wp, uffd-wp'ing an unmapped page and (a) uffd-wp'ing it a second time; or (b) uffd-unprotecting it; or (c) unregistering uffd-wp. Then, ff we trigger fallocate(FALLOC_FL_PUNCH_HOLE) on that file range, we will run into a VM_BUG_ON: [ 195.039560] page:00000000ba1f2987 refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x0 [ 195.039565] flags: 0x7ffffc0001000(reserved|node=0|zone=0|lastcpupid=0x1fffff) [ 195.039568] raw: 0007ffffc0001000 ffffe742c0000008 ffffe742c0000008 0000000000000000 [ 195.039569] raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 [ 195.039569] page dumped because: VM_BUG_ON_PAGE(compound && !PageHead(page)) [ 195.039573] ------------[ cut here ]------------ [ 195.039574] kernel BUG at mm/rmap.c:1346! [ 195.039579] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI [ 195.039581] CPU: 7 PID: 4777 Comm: qemu-system-x86 Not tainted 6.0.12-200.fc36.x86_64 #1 [ 195.039583] Hardware name: LENOVO 20WNS1F81N/20WNS1F81N, BIOS N35ET50W (1.50 ) 09/15/2022 [ 195.039584] RIP: 0010:page_remove_rmap+0x45b/0x550 [ 195.039588] Code: [...] [ 195.039589] RSP: 0018:ffffbc03c3633ba8 EFLAGS: 00010292 [ 195.039591] RAX: 0000000000000040 RBX: ffffe742c0000000 RCX: 0000000000000000 [ 195.039592] RDX: 0000000000000002 RSI: ffffffff8e7aac1a RDI: 00000000ffffffff [ 195.039592] RBP: 0000000000000001 R08: 0000000000000000 R09: ffffbc03c3633a08 [ 195.039593] R10: 0000000000000003 R11: ffffffff8f146328 R12: ffff9b04c42754b0 [ 195.039594] R13: ffffffff8fcc6328 R14: ffffbc03c3633c80 R15: ffff9b0484ab9100 [ 195.039595] FS: 00007fc7aaf68640(0000) GS:ffff9b0bbf7c0000(0000) knlGS:0000000000000000 [ 195.039596] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 195.039597] CR2: 000055d402c49110 CR3: 0000000159392003 CR4: 0000000000772ee0 [ 195.039598] PKRU: 55555554 [ 195.039599] Call Trace: [ 195.039600] <TASK> [ 195.039602] __unmap_hugepage_range+0x33b/0x7d0 [ 195.039605] unmap_hugepage_range+0x55/0x70 [ 195.039608] hugetlb_vmdelete_list+0x77/0xa0 [ 195.039611] hugetlbfs_fallocate+0x410/0x550 [ 195.039612] ? _raw_spin_unlock_irqrestore+0x23/0x40 [ 195.039616] vfs_fallocate+0x12e/0x360 [ 195.039618] __x64_sys_fallocate+0x40/0x70 [ 195.039620] do_syscall_64+0x58/0x80 [ 195.039623] ? syscall_exit_to_user_mode+0x17/0x40 [ 195.039624] ? do_syscall_64+0x67/0x80 [ 195.039626] entry_SYSCALL_64_after_hwframe+0x63/0xcd [ 195.039628] RIP: 0033:0x7fc7b590651f [ 195.039653] Code: [...] [ 195.039654] RSP: 002b:00007fc7aaf66e70 EFLAGS: 00000293 ORIG_RAX: 000000000000011d [ 195.039655] RAX: ffffffffffffffda RBX: 0000558ef4b7f370 RCX: 00007fc7b590651f [ 195.039656] RDX: 0000000018000000 RSI: 0000000000000003 RDI: 000000000000000c [ 195.039657] RBP: 0000000008000000 R08: 0000000000000000 R09: 0000000000000073 [ 195.039658] R10: 0000000008000000 R11: 0000000000000293 R12: 0000000018000000 [ 195.039658] R13: 00007fb8bbe00000 R14: 000000000000000c R15: 0000000000001000 [ 195.039661] </TASK> Fix it by not going into the "!huge_pte_none(pte)" case if we stumble over an exclusive marker. spin_unlock() + continue would get the job done. However, instead, make it clearer that there are no fall-through statements: we process each case (hwpoison, migration, marker, !none, none) and then unlock the page table to continue with the next PTE. Let's avoid "continue" statements and use a single spin_unlock() at the end. Link: https://lkml.kernel.org/r/20221222205511.675832-1-david@redhat.com Link: https://lkml.kernel.org/r/20221222205511.675832-2-david@redhat.com Fixes: 60dfaad ("mm/hugetlb: allow uffd wr-protect none ptes") Signed-off-by: David Hildenbrand <david@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Mike Kravetz <mike.kravetz@oracle.com> Cc: Miaohe Lin <linmiaohe@huawei.com> Cc: Muchun Song <muchun.song@linux.dev> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

commit 55ba18d upstream. The commit 4af1b64 ("octeontx2-pf: Fix lmtst ID used in aura free") uses the get/put_cpu() to protect the usage of percpu pointer in ->aura_freeptr() callback, but it also unnecessarily disable the preemption for the blockable memory allocation. The commit 87b93b6 ("octeontx2-pf: Avoid use of GFP_KERNEL in atomic context") tried to fix these sleep inside atomic warnings. But it only fix the one for the non-rt kernel. For the rt kernel, we still get the similar warnings like below. BUG: sleeping function called from invalid context at kernel/locking/spinlock_rt.c:46 in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 1, name: swapper/0 preempt_count: 1, expected: 0 RCU nest depth: 0, expected: 0 3 locks held by swapper/0/1: #0: ffff800009fc5fe8 (rtnl_mutex){+.+.}-{3:3}, at: rtnl_lock+0x24/0x30 #1: ffff000100c276c0 (&mbox->lock){+.+.}-{3:3}, at: otx2_init_hw_resources+0x8c/0x3a4 #2: ffffffbfef6537e0 (&cpu_rcache->lock){+.+.}-{2:2}, at: alloc_iova_fast+0x1ac/0x2ac Preemption disabled at: [<ffff800008b1908c>] otx2_rq_aura_pool_init+0x14c/0x284 CPU: 20 PID: 1 Comm: swapper/0 Tainted: G W 6.2.0-rc3-rt1-yocto-preempt-rt #1 Hardware name: Marvell OcteonTX CN96XX board (DT) Call trace: dump_backtrace.part.0+0xe8/0xf4 show_stack+0x20/0x30 dump_stack_lvl+0x9c/0xd8 dump_stack+0x18/0x34 __might_resched+0x188/0x224 rt_spin_lock+0x64/0x110 alloc_iova_fast+0x1ac/0x2ac iommu_dma_alloc_iova+0xd4/0x110 __iommu_dma_map+0x80/0x144 iommu_dma_map_page+0xe8/0x260 dma_map_page_attrs+0xb4/0xc0 __otx2_alloc_rbuf+0x90/0x150 otx2_rq_aura_pool_init+0x1c8/0x284 otx2_init_hw_resources+0xe4/0x3a4 otx2_open+0xf0/0x610 __dev_open+0x104/0x224 __dev_change_flags+0x1e4/0x274 dev_change_flags+0x2c/0x7c ic_open_devs+0x124/0x2f8 ip_auto_config+0x180/0x42c do_one_initcall+0x90/0x4dc do_basic_setup+0x10c/0x14c kernel_init_freeable+0x10c/0x13c kernel_init+0x2c/0x140 ret_from_fork+0x10/0x20 Of course, we can shuffle the get/put_cpu() to only wrap the invocation of ->aura_freeptr() as what commit 87b93b6 does. But there are only two ->aura_freeptr() callbacks, otx2_aura_freeptr() and cn10k_aura_freeptr(). There is no usage of perpcu variable in the otx2_aura_freeptr() at all, so the get/put_cpu() seems redundant to it. We can move the get/put_cpu() into the corresponding callback which really has the percpu variable usage and avoid the sprinkling of get/put_cpu() in several places. Fixes: 4af1b64 ("octeontx2-pf: Fix lmtst ID used in aura free") Signed-off-by: Kevin Hao <haokexin@gmail.com> Link: https://lore.kernel.org/r/20230118071300.3271125-1-haokexin@gmail.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit 3c46372 ] This lockdep splat says it better than I could: ================================ WARNING: inconsistent lock state 6.2.0-rc2-07010-ga9b9500ffaac-dirty #967 Not tainted -------------------------------- inconsistent {IN-SOFTIRQ-W} -> {SOFTIRQ-ON-W} usage. kworker/1:3/179 [HC0[0]:SC0[0]:HE1:SE1] takes: ffff3ec4036ce098 (_xmit_ETHER#2){+.?.}-{3:3}, at: netif_freeze_queues+0x5c/0xc0 {IN-SOFTIRQ-W} state was registered at: _raw_spin_lock+0x5c/0xc0 sch_direct_xmit+0x148/0x37c __dev_queue_xmit+0x528/0x111c ip6_finish_output2+0x5ec/0xb7c ip6_finish_output+0x240/0x3f0 ip6_output+0x78/0x360 ndisc_send_skb+0x33c/0x85c ndisc_send_rs+0x54/0x12c addrconf_rs_timer+0x154/0x260 call_timer_fn+0xb8/0x3a0 __run_timers.part.0+0x214/0x26c run_timer_softirq+0x3c/0x74 __do_softirq+0x14c/0x5d8 ____do_softirq+0x10/0x20 call_on_irq_stack+0x2c/0x5c do_softirq_own_stack+0x1c/0x30 __irq_exit_rcu+0x168/0x1a0 irq_exit_rcu+0x10/0x40 el1_interrupt+0x38/0x64 irq event stamp: 7825 hardirqs last enabled at (7825): [<ffffdf1f7200cae4>] exit_to_kernel_mode+0x34/0x130 hardirqs last disabled at (7823): [<ffffdf1f708105f0>] __do_softirq+0x550/0x5d8 softirqs last enabled at (7824): [<ffffdf1f7081050c>] __do_softirq+0x46c/0x5d8 softirqs last disabled at (7811): [<ffffdf1f708166e0>] ____do_softirq+0x10/0x20 other info that might help us debug this: Possible unsafe locking scenario: CPU0 ---- lock(_xmit_ETHER#2); <Interrupt> lock(_xmit_ETHER#2); *** DEADLOCK *** 3 locks held by kworker/1:3/179: #0: ffff3ec400004748 ((wq_completion)events){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #1: ffff80000a0bbdc8 ((work_completion)(&priv->tx_onestep_tstamp)){+.+.}-{0:0}, at: process_one_work+0x1f4/0x6c0 #2: ffff3ec4036cd438 (&dev->tx_global_lock){+.+.}-{3:3}, at: netif_tx_lock+0x1c/0x34 Workqueue: events enetc_tx_onestep_tstamp Call trace: print_usage_bug.part.0+0x208/0x22c mark_lock+0x7f0/0x8b0 __lock_acquire+0x7c4/0x1ce0 lock_acquire.part.0+0xe0/0x220 lock_acquire+0x68/0x84 _raw_spin_lock+0x5c/0xc0 netif_freeze_queues+0x5c/0xc0 netif_tx_lock+0x24/0x34 enetc_tx_onestep_tstamp+0x20/0x100 process_one_work+0x28c/0x6c0 worker_thread+0x74/0x450 kthread+0x118/0x11c but I'll say it anyway: the enetc_tx_onestep_tstamp() work item runs in process context, therefore with softirqs enabled (i.o.w., it can be interrupted by a softirq). If we hold the netif_tx_lock() when there is an interrupt, and the NET_TX softirq then gets scheduled, this will take the netif_tx_lock() a second time and deadlock the kernel. To solve this, use netif_tx_lock_bh(), which blocks softirqs from running. Fixes: 7294380 ("enetc: support PTP Sync packet one-step timestamping") Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com> Reviewed-by: Alexander Duyck <alexanderduyck@fb.com> Link: https://lore.kernel.org/r/20230112105440.1786799-1-vladimir.oltean@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 241f519 ] This attempts to avoid circular locking dependency between sock_lock and hdev_lock: WARNING: possible circular locking dependency detected 6.0.0-rc7-03728-g18dd8ab0a783 #3 Not tainted ------------------------------------------------------ kworker/u3:2/53 is trying to acquire lock: ffff888000254130 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}, at: iso_conn_del+0xbd/0x1d0 but task is already holding lock: ffffffff9f39a080 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0x1b5/0x500 which lock already depends on the new lock. the existing dependency chain (in reverse order) is: -> #2 (hci_cb_list_lock){+.+.}-{3:3}: __mutex_lock+0x10e/0xfe0 hci_le_remote_feat_complete_evt+0x17f/0x320 hci_event_packet+0x39c/0x7d0 hci_rx_work+0x2bf/0x950 process_one_work+0x569/0x980 worker_thread+0x2a3/0x6f0 kthread+0x153/0x180 ret_from_fork+0x22/0x30 -> #1 (&hdev->lock){+.+.}-{3:3}: __mutex_lock+0x10e/0xfe0 iso_connect_cis+0x6f/0x5a0 iso_sock_connect+0x1af/0x710 __sys_connect+0x17e/0x1b0 __x64_sys_connect+0x37/0x50 do_syscall_64+0x43/0x90 entry_SYSCALL_64_after_hwframe+0x62/0xcc -> #0 (sk_lock-AF_BLUETOOTH-BTPROTO_ISO){+.+.}-{0:0}: __lock_acquire+0x1b51/0x33d0 lock_acquire+0x16f/0x3b0 lock_sock_nested+0x32/0x80 iso_conn_del+0xbd/0x1d0 iso_connect_cfm+0x226/0x680 hci_le_cis_estabilished_evt+0x1ed/0x500 hci_event_packet+0x39c/0x7d0 hci_rx_work+0x2bf/0x950 process_one_work+0x569/0x980 worker_thread+0x2a3/0x6f0 kthread+0x153/0x180 ret_from_fork+0x22/0x30 other info that might help us debug this: Chain exists of: sk_lock-AF_BLUETOOTH-BTPROTO_ISO --> &hdev->lock --> hci_cb_list_lock Possible unsafe locking scenario: CPU0 CPU1 ---- ---- lock(hci_cb_list_lock); lock(&hdev->lock); lock(hci_cb_list_lock); lock(sk_lock-AF_BLUETOOTH-BTPROTO_ISO); *** DEADLOCK *** 4 locks held by kworker/u3:2/53: #0: ffff8880021d9130 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4ad/0x980 #1: ffff888002387de0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4ad/0x980 #2: ffff888001ac0070 (&hdev->lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0xc3/0x500 #3: ffffffff9f39a080 (hci_cb_list_lock){+.+.}-{3:3}, at: hci_le_cis_estabilished_evt+0x1b5/0x500 Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Stable-dep-of: 6a5ad25 ("Bluetooth: ISO: Fix possible circular locking dependency") Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit e9d50f7 ] This fixes the following trace caused by attempting to lock cmd_sync_work_lock while holding the rcu_read_lock: kworker/u3:2/212 is trying to lock: ffff888002600910 (&hdev->cmd_sync_work_lock){+.+.}-{3:3}, at: hci_cmd_sync_queue+0xad/0x140 other info that might help us debug this: context-{4:4} 4 locks held by kworker/u3:2/212: #0: ffff8880028c6530 ((wq_completion)hci0#2){+.+.}-{0:0}, at: process_one_work+0x4dc/0x9a0 #1: ffff888001aafde0 ((work_completion)(&hdev->rx_work)){+.+.}-{0:0}, at: process_one_work+0x4dc/0x9a0 #2: ffff888002600070 (&hdev->lock){+.+.}-{3:3}, at: hci_cc_le_set_cig_params+0x64/0x4f0 #3: ffffffffa5994b00 (rcu_read_lock){....}-{1:2}, at: hci_cc_le_set_cig_params+0x2f9/0x4f0 Fixes: 26afbd8 ("Bluetooth: Add initial implementation of CIS connections") Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

[ Upstream commit 5aa5610 ] The cited commit changed class of tc_ht internal mutex in order to avoid false lock dependency with fs_core node and flow_table hash table structures. However, hash table implementation internally also includes a workqueue task with its own lockdep map which causes similar bogus lockdep splat[0]. Fix it by also adding dedicated class for hash table workqueue work structure of tc_ht. [0]: [ 1139.672465] ====================================================== [ 1139.673552] WARNING: possible circular locking dependency detected [ 1139.674635] 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 Not tainted [ 1139.675734] ------------------------------------------------------ [ 1139.676801] modprobe/5998 is trying to acquire lock: [ 1139.677726] ffff88811e7b93b8 (&node->lock){++++}-{3:3}, at: down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.679662] but task is already holding lock: [ 1139.680703] ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0 [ 1139.682223] which lock already depends on the new lock. [ 1139.683640] the existing dependency chain (in reverse order) is: [ 1139.684887] -> #2 (&tc_ht_lock_key){+.+.}-{3:3}: [ 1139.685975] __mutex_lock+0x12c/0x14b0 [ 1139.686659] rht_deferred_worker+0x35/0x1540 [ 1139.687405] process_one_work+0x7c2/0x1310 [ 1139.688134] worker_thread+0x59d/0xec0 [ 1139.688820] kthread+0x28f/0x330 [ 1139.689444] ret_from_fork+0x1f/0x30 [ 1139.690106] -> #1 ((work_completion)(&ht->run_work)){+.+.}-{0:0}: [ 1139.691250] __flush_work+0xe8/0x900 [ 1139.691915] __cancel_work_timer+0x2ca/0x3f0 [ 1139.692655] rhashtable_free_and_destroy+0x22/0x6f0 [ 1139.693472] del_sw_flow_table+0x22/0xb0 [mlx5_core] [ 1139.694592] tree_put_node+0x24c/0x450 [mlx5_core] [ 1139.695686] tree_remove_node+0x6e/0x100 [mlx5_core] [ 1139.696803] mlx5_destroy_flow_table+0x187/0x690 [mlx5_core] [ 1139.698017] mlx5e_tc_nic_cleanup+0x2f8/0x400 [mlx5_core] [ 1139.699217] mlx5e_cleanup_nic_rx+0x2b/0x210 [mlx5_core] [ 1139.700397] mlx5e_detach_netdev+0x19d/0x2b0 [mlx5_core] [ 1139.701571] mlx5e_suspend+0xdb/0x140 [mlx5_core] [ 1139.702665] mlx5e_remove+0x89/0x190 [mlx5_core] [ 1139.703756] auxiliary_bus_remove+0x52/0x70 [ 1139.704492] device_release_driver_internal+0x3c1/0x600 [ 1139.705360] bus_remove_device+0x2a5/0x560 [ 1139.706080] device_del+0x492/0xb80 [ 1139.706724] mlx5_rescan_drivers_locked+0x194/0x6a0 [mlx5_core] [ 1139.707961] mlx5_unregister_device+0x7a/0xa0 [mlx5_core] [ 1139.709138] mlx5_uninit_one+0x5f/0x160 [mlx5_core] [ 1139.710252] remove_one+0xd1/0x160 [mlx5_core] [ 1139.711297] pci_device_remove+0x96/0x1c0 [ 1139.722721] device_release_driver_internal+0x3c1/0x600 [ 1139.723590] unbind_store+0x1b1/0x200 [ 1139.724259] kernfs_fop_write_iter+0x348/0x520 [ 1139.725019] vfs_write+0x7b2/0xbf0 [ 1139.725658] ksys_write+0xf3/0x1d0 [ 1139.726292] do_syscall_64+0x3d/0x90 [ 1139.726942] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.727769] -> #0 (&node->lock){++++}-{3:3}: [ 1139.728698] __lock_acquire+0x2cf5/0x62f0 [ 1139.729415] lock_acquire+0x1c1/0x540 [ 1139.730076] down_write+0x8e/0x1f0 [ 1139.730709] down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.731841] mlx5_del_flow_rules+0x6f/0x610 [mlx5_core] [ 1139.732982] __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core] [ 1139.734207] mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core] [ 1139.735491] mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core] [ 1139.736716] mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core] [ 1139.738007] mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core] [ 1139.739213] mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core] [ 1139.740377] _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core] [ 1139.741534] rhashtable_free_and_destroy+0x3be/0x6f0 [ 1139.742351] mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core] [ 1139.743512] mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core] [ 1139.744683] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] [ 1139.745860] mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core] [ 1139.747098] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] [ 1139.748372] mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core] [ 1139.749590] __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core] [ 1139.750813] mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core] [ 1139.752147] mlx5e_rep_remove+0x62/0x80 [mlx5_core] [ 1139.753293] auxiliary_bus_remove+0x52/0x70 [ 1139.754028] device_release_driver_internal+0x3c1/0x600 [ 1139.754885] driver_detach+0xc1/0x180 [ 1139.755553] bus_remove_driver+0xef/0x2e0 [ 1139.756260] auxiliary_driver_unregister+0x16/0x50 [ 1139.757059] mlx5e_rep_cleanup+0x19/0x30 [mlx5_core] [ 1139.758207] mlx5e_cleanup+0x12/0x30 [mlx5_core] [ 1139.759295] mlx5_cleanup+0xc/0x49 [mlx5_core] [ 1139.760384] __x64_sys_delete_module+0x2b5/0x450 [ 1139.761166] do_syscall_64+0x3d/0x90 [ 1139.761827] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.762663] other info that might help us debug this: [ 1139.763925] Chain exists of: &node->lock --> (work_completion)(&ht->run_work) --> &tc_ht_lock_key [ 1139.765743] Possible unsafe locking scenario: [ 1139.766688] CPU0 CPU1 [ 1139.767399] ---- ---- [ 1139.768111] lock(&tc_ht_lock_key); [ 1139.768704] lock((work_completion)(&ht->run_work)); [ 1139.769869] lock(&tc_ht_lock_key); [ 1139.770770] lock(&node->lock); [ 1139.771326] *** DEADLOCK *** [ 1139.772345] 2 locks held by modprobe/5998: [ 1139.772994] #0: ffff88813c1ff0e8 (&dev->mutex){....}-{3:3}, at: device_release_driver_internal+0x8d/0x600 [ 1139.774399] #1: ffff88813c1f96a0 (&tc_ht_lock_key){+.+.}-{3:3}, at: rhashtable_free_and_destroy+0x38/0x6f0 [ 1139.775822] stack backtrace: [ 1139.776579] CPU: 3 PID: 5998 Comm: modprobe Not tainted 6.1.0_for_upstream_debug_2022_12_12_17_02 #1 [ 1139.777935] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 [ 1139.779529] Call Trace: [ 1139.779992] <TASK> [ 1139.780409] dump_stack_lvl+0x57/0x7d [ 1139.781015] check_noncircular+0x278/0x300 [ 1139.781687] ? print_circular_bug+0x460/0x460 [ 1139.782381] ? rcu_read_lock_sched_held+0x3f/0x70 [ 1139.783121] ? lock_release+0x487/0x7c0 [ 1139.783759] ? orc_find.part.0+0x1f1/0x330 [ 1139.784423] ? mark_lock.part.0+0xef/0x2fc0 [ 1139.785091] __lock_acquire+0x2cf5/0x62f0 [ 1139.785754] ? register_lock_class+0x18e0/0x18e0 [ 1139.786483] lock_acquire+0x1c1/0x540 [ 1139.787093] ? down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.788195] ? lockdep_hardirqs_on_prepare+0x3f0/0x3f0 [ 1139.788978] ? register_lock_class+0x18e0/0x18e0 [ 1139.789715] down_write+0x8e/0x1f0 [ 1139.790292] ? down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.791380] ? down_write_killable+0x220/0x220 [ 1139.792080] ? find_held_lock+0x2d/0x110 [ 1139.792713] down_write_ref_node+0x7c/0xe0 [mlx5_core] [ 1139.793795] mlx5_del_flow_rules+0x6f/0x610 [mlx5_core] [ 1139.794879] __mlx5_eswitch_del_rule+0xdd/0x560 [mlx5_core] [ 1139.796032] ? __esw_offloads_unload_rep+0xd0/0xd0 [mlx5_core] [ 1139.797227] ? xa_load+0x11a/0x200 [ 1139.797800] ? __xa_clear_mark+0xf0/0xf0 [ 1139.798438] mlx5_eswitch_del_offloaded_rule+0x14/0x20 [mlx5_core] [ 1139.799660] mlx5e_tc_rule_unoffload+0x104/0x2b0 [mlx5_core] [ 1139.800821] mlx5e_tc_unoffload_fdb_rules+0x10c/0x1f0 [mlx5_core] [ 1139.802049] ? mlx5_eswitch_get_uplink_priv+0x25/0x80 [mlx5_core] [ 1139.803260] mlx5e_tc_del_fdb_flow+0xc3c/0xfa0 [mlx5_core] [ 1139.804398] ? __cancel_work_timer+0x1c2/0x3f0 [ 1139.805099] ? mlx5e_tc_unoffload_from_slow_path+0x460/0x460 [mlx5_core] [ 1139.806387] mlx5e_tc_del_flow+0x146/0xa20 [mlx5_core] [ 1139.807481] _mlx5e_tc_del_flow+0x38/0x60 [mlx5_core] [ 1139.808564] rhashtable_free_and_destroy+0x3be/0x6f0 [ 1139.809336] ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core] [ 1139.809336] ? mlx5e_tc_del_flow+0xa20/0xa20 [mlx5_core] [ 1139.810455] mlx5e_tc_ht_cleanup+0x1b/0x30 [mlx5_core] [ 1139.811552] mlx5e_cleanup_rep_tx+0x4a/0xe0 [mlx5_core] [ 1139.812655] mlx5e_detach_netdev+0x1ca/0x2b0 [mlx5_core] [ 1139.813768] mlx5e_netdev_change_profile+0xd9/0x1c0 [mlx5_core] [ 1139.814952] mlx5e_netdev_attach_nic_profile+0x1b/0x30 [mlx5_core] [ 1139.816166] mlx5e_vport_rep_unload+0x16a/0x1b0 [mlx5_core] [ 1139.817336] __esw_offloads_unload_rep+0xb1/0xd0 [mlx5_core] [ 1139.818507] mlx5_eswitch_unregister_vport_reps+0x409/0x5f0 [mlx5_core] [ 1139.819788] ? mlx5_eswitch_uplink_get_proto_dev+0x30/0x30 [mlx5_core] [ 1139.821051] ? kernfs_find_ns+0x137/0x310 [ 1139.821705] mlx5e_rep_remove+0x62/0x80 [mlx5_core] [ 1139.822778] auxiliary_bus_remove+0x52/0x70 [ 1139.823449] device_release_driver_internal+0x3c1/0x600 [ 1139.824240] driver_detach+0xc1/0x180 [ 1139.824842] bus_remove_driver+0xef/0x2e0 [ 1139.825504] auxiliary_driver_unregister+0x16/0x50 [ 1139.826245] mlx5e_rep_cleanup+0x19/0x30 [mlx5_core] [ 1139.827322] mlx5e_cleanup+0x12/0x30 [mlx5_core] [ 1139.828345] mlx5_cleanup+0xc/0x49 [mlx5_core] [ 1139.829382] __x64_sys_delete_module+0x2b5/0x450 [ 1139.830119] ? module_flags+0x300/0x300 [ 1139.830750] ? task_work_func_match+0x50/0x50 [ 1139.831440] ? task_work_cancel+0x20/0x20 [ 1139.832088] ? lockdep_hardirqs_on_prepare+0x273/0x3f0 [ 1139.832873] ? syscall_enter_from_user_mode+0x1d/0x50 [ 1139.833661] ? trace_hardirqs_on+0x2d/0x100 [ 1139.834328] do_syscall_64+0x3d/0x90 [ 1139.834922] entry_SYSCALL_64_after_hwframe+0x46/0xb0 [ 1139.835700] RIP: 0033:0x7f153e71288b [ 1139.836302] Code: 73 01 c3 48 8b 0d 9d 75 0e 00 f7 d8 64 89 01 48 83 c8 ff c3 66 2e 0f 1f 84 00 00 00 00 00 90 f3 0f 1e fa b8 b0 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 6d 75 0e 00 f7 d8 64 89 01 48 [ 1139.838866] RSP: 002b:00007ffe0a3ed938 EFLAGS: 00000206 ORIG_RAX: 00000000000000b0 [ 1139.840020] RAX: ffffffffffffffda RBX: 0000564c2cbf8220 RCX: 00007f153e71288b [ 1139.841043] RDX: 0000000000000000 RSI: 0000000000000800 RDI: 0000564c2cbf8288 [ 1139.842072] RBP: 0000564c2cbf8220 R08: 0000000000000000 R09: 0000000000000000 [ 1139.843094] R10: 00007f153e7a3ac0 R11: 0000000000000206 R12: 0000564c2cbf8288 [ 1139.844118] R13: 0000000000000000 R14: 0000564c2cbf7ae8 R15: 00007ffe0a3efcb8 Fixes: 9ba3333 ("net/mlx5e: Avoid false lock depenency warning on tc_ht") Signed-off-by: Vlad Buslov <vladbu@nvidia.com> Reviewed-by: Eli Cohen <elic@nvidia.com> Reviewed-by: Roi Dayan <roid@nvidia.com> Signed-off-by: Saeed Mahameed <saeedm@nvidia.com> Signed-off-by: Sasha Levin <sashal@kernel.org>

…eues(). commit 62ec33b upstream. Christoph Paasch reported that commit b5fc292 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().") started triggering WARN_ON_ONCE(sk->sk_forward_alloc) in sk_stream_kill_queues(). [0 - 2] Also, we can reproduce it by a program in [3]. In the commit, we delay freeing ipv6_pinfo.pktoptions from sk->destroy() to sk->sk_destruct(), so sk->sk_forward_alloc is no longer zero in inet_csk_destroy_sock(). The same check has been in inet_sock_destruct() from at least v2.6, we can just remove the WARN_ON_ONCE(). However, among the users of sk_stream_kill_queues(), only CAIF is not calling inet_sock_destruct(). Thus, we add the same WARN_ON_ONCE() to caif_sock_destructor(). [0]: https://lore.kernel.org/netdev/39725AB4-88F1-41B3-B07F-949C5CAEFF4F@icloud.com/ [1]: multipath-tcp/mptcp_net-next#341 [2]: WARNING: CPU: 0 PID: 3232 at net/core/stream.c:212 sk_stream_kill_queues+0x2f9/0x3e0 Modules linked in: CPU: 0 PID: 3232 Comm: syz-executor.0 Not tainted 6.2.0-rc5ab24eb4698afbe147b424149c529e2a43ec24eb5 #2 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014 RIP: 0010:sk_stream_kill_queues+0x2f9/0x3e0 Code: 03 0f b6 04 02 84 c0 74 08 3c 03 0f 8e ec 00 00 00 8b ab 08 01 00 00 e9 60 ff ff ff e8 d0 5f b6 fe 0f 0b eb 97 e8 c7 5f b6 fe <0f> 0b eb a0 e8 be 5f b6 fe 0f 0b e9 6a fe ff ff e8 02 07 e3 fe e9 RSP: 0018:ffff88810570fc68 EFLAGS: 00010293 RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000 RDX: ffff888101f38f40 RSI: ffffffff8285e529 RDI: 0000000000000005 RBP: 0000000000000ce0 R08: 0000000000000005 R09: 0000000000000000 R10: 0000000000000ce0 R11: 0000000000000001 R12: ffff8881009e9488 R13: ffffffff84af2cc0 R14: 0000000000000000 R15: ffff8881009e9458 FS: 00007f7fdfbd5800(0000) GS:ffff88811b600000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000001b32923000 CR3: 00000001062fc006 CR4: 0000000000170ef0 Call Trace: <TASK> inet_csk_destroy_sock+0x1a1/0x320 __tcp_close+0xab6/0xe90 tcp_close+0x30/0xc0 inet_release+0xe9/0x1f0 inet6_release+0x4c/0x70 __sock_release+0xd2/0x280 sock_close+0x15/0x20 __fput+0x252/0xa20 task_work_run+0x169/0x250 exit_to_user_mode_prepare+0x113/0x120 syscall_exit_to_user_mode+0x1d/0x40 do_syscall_64+0x48/0x90 entry_SYSCALL_64_after_hwframe+0x72/0xdc RIP: 0033:0x7f7fdf7ae28d Code: c1 20 00 00 75 10 b8 03 00 00 00 0f 05 48 3d 01 f0 ff ff 73 31 c3 48 83 ec 08 e8 ee fb ff ff 48 89 04 24 b8 03 00 00 00 0f 05 <48> 8b 3c 24 48 89 c2 e8 37 fc ff ff 48 89 d0 48 83 c4 08 48 3d 01 RSP: 002b:00000000007dfbb0 EFLAGS: 00000293 ORIG_RAX: 0000000000000003 RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7fdf7ae28d RDX: 0000000000000000 RSI: ffffffffffffffff RDI: 0000000000000003 RBP: 0000000000000000 R08: 000000007f338e0f R09: 0000000000000e0f R10: 000000007f338e13 R11: 0000000000000293 R12: 00007f7fdefff000 R13: 00007f7fdefffcd8 R14: 00007f7fdefffce0 R15: 00007f7fdefffcd8 </TASK> [3]: https://lore.kernel.org/netdev/20230208004245.83497-1-kuniyu@amazon.com/ Fixes: b5fc292 ("inet6: Remove inet6_destroy_sock() in sk->sk_prot->destroy().") Reported-by: syzbot <syzkaller@googlegroups.com> Reported-by: Christoph Paasch <christophpaasch@icloud.com> Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: Jakub Kicinski <kuba@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

…prevent UAF" This reverts commit 9e46e4d. kbuild reports a warning in memblock_remove_region() because of a false positive caused by partial reset of the memblock state. Doing the full reset will remove the false positives, but will allow late use of memblock_free() to go unnoticed, so it is better to revert the offending commit. WARNING: CPU: 0 PID: 1 at mm/memblock.c:352 memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1)) Modules linked in: CPU: 0 PID: 1 Comm: swapper/0 Not tainted 6.5.0-rc3-00001-g9e46e4dcd9d6 #2 RIP: 0010:memblock_remove_region (kbuild/src/x86_64/mm/memblock.c:352 (discriminator 1)) Call Trace: memblock_discard (kbuild/src/x86_64/mm/memblock.c:383) page_alloc_init_late (kbuild/src/x86_64/include/linux/find.h:208 kbuild/src/x86_64/include/linux/nodemask.h:266 kbuild/src/x86_64/mm/mm_init.c:2405) kernel_init_freeable (kbuild/src/x86_64/init/main.c:1325 kbuild/src/x86_64/init/main.c:1546) kernel_init (kbuild/src/x86_64/init/main.c:1439) ret_from_fork (kbuild/src/x86_64/arch/x86/kernel/process.c:145) ret_from_fork_asm (kbuild/src/x86_64/arch/x86/entry/entry_64.S:298) Reported-by: kernel test robot <oliver.sang@intel.com> Closes: https://lore.kernel.org/oe-lkp/202307271656.447aa17e-oliver.sang@intel.com Signed-off-by: "Mike Rapoport (IBM)" <rppt@kernel.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Hou Tao says: ==================== The patchset fixes two reported warning in cpu-map when running xdp_redirect_cpu and some RT threads concurrently. Patch #1 fixes the warning in __cpu_map_ring_cleanup() when kthread is stopped prematurely. Patch #2 fixes the warning in __xdp_return() when there are pending skbs in ptr_ring. Please see individual patches for more details. And comments are always welcome. ==================== Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>

…kernel/git/kvmarm/kvmarm into HEAD KVM/arm64 fixes for 6.5, part #2 - Fixes for the configuration of SVE/SME traps when hVHE mode is in use - Allow use of pKVM on systems with FF-A implementations that are v1.0 compatible - Request/release percpu IRQs (arch timer, vGIC maintenance) correctly when pKVM is in use - Fix function prototype after __kvm_host_psci_cpu_entry() rename - Skip to the next instruction when emulating writes to TCR_EL1 on AmpereOne systems

Ido Schimmel says: ==================== nexthop: Nexthop dump fixes Patches #1 and #3 fix two problems related to nexthops and nexthop buckets dump, respectively. Patch #2 is a preparation for the third patch. The pattern described in these patches of splitting the NLMSG_DONE to a separate response is prevalent in other rtnetlink dump callbacks. I don't know if it's because I'm missing something or if this was done intentionally to ensure the message is delivered to user space. After commit 0642840 ("af_netlink: ensure that NLMSG_DONE never fails in dumps") this is no longer necessary and I can improve these dump callbacks assuming this analysis is correct. No regressions in existing tests: # ./fib_nexthops.sh [...] Tests passed: 230 Tests failed: 0 ==================== Link: https://lore.kernel.org/r/20230808075233.3337922-1-idosch@nvidia.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>

When the tdm lane mask is computed, the driver currently fills the 1st lane before moving on to the next. If the stream has less channels than the lanes can accommodate, slots will be disabled on the last lanes. Unfortunately, the HW distribute channels in a different way. It distribute channels in pair on each lanes before moving on the next slots. This difference leads to problems if a device has an interface with more than 1 lane and with more than 2 slots per lane. For example: a playback interface with 2 lanes and 4 slots each (total 8 slots - zero based numbering) - Playing a 8ch stream: - All slots activated by the driver - channel #2 will be played on lane #1 - slot #0 following HW placement - Playing a 4ch stream: - Lane #1 disabled by the driver - channel #2 will be played on lane #0 - slot #2 This behaviour is obviously not desirable. Change the way slots are activated on the TDM lanes to follow what the HW does and make sure each channel always get mapped to the same slot/lane. Fixes: 1a11d88 ("ASoC: meson: add tdm formatter base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org>

With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the /proc/powerpc/rtas/firmware_update interface to prepare a system firmware update yields a BUG(): kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2 Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000 REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c CFAR: c0000000001fbd34 IRQMASK: 0 [ ... GPRs omitted ... ] NIP usercopy_abort+0xa0/0xb0 LR usercopy_abort+0x9c/0xb0 Call Trace: usercopy_abort+0x9c/0xb0 (unreliable) __check_heap_object+0x1b4/0x1d0 __check_object_size+0x2d0/0x380 rtas_flash_write+0xe4/0x250 proc_reg_write+0xfc/0x160 vfs_write+0xfc/0x4e0 ksys_write+0x90/0x160 system_call_exception+0x178/0x320 system_call_common+0x160/0x2c4 The blocks of the firmware image are copied directly from user memory to objects allocated from flash_block_cache, so flash_block_cache must be created using kmem_cache_create_usercopy() to mark it safe for user access. Fixes: 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> [mpe: Trim and indent oops] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com

commit 4f31759 upstream. With hardened usercopy enabled (CONFIG_HARDENED_USERCOPY=y), using the /proc/powerpc/rtas/firmware_update interface to prepare a system firmware update yields a BUG(): kernel BUG at mm/usercopy.c:102! Oops: Exception in kernel mode, sig: 5 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries Modules linked in: CPU: 0 PID: 2232 Comm: dd Not tainted 6.5.0-rc3+ #2 Hardware name: IBM,8408-E8E POWER8E (raw) 0x4b0201 0xf000004 of:IBM,FW860.50 (SV860_146) hv:phyp pSeries NIP: c0000000005991d0 LR: c0000000005991cc CTR: 0000000000000000 REGS: c0000000148c76a0 TRAP: 0700 Not tainted (6.5.0-rc3+) MSR: 8000000000029033 <SF,EE,ME,IR,DR,RI,LE> CR: 24002242 XER: 0000000c CFAR: c0000000001fbd34 IRQMASK: 0 [ ... GPRs omitted ... ] NIP usercopy_abort+0xa0/0xb0 LR usercopy_abort+0x9c/0xb0 Call Trace: usercopy_abort+0x9c/0xb0 (unreliable) __check_heap_object+0x1b4/0x1d0 __check_object_size+0x2d0/0x380 rtas_flash_write+0xe4/0x250 proc_reg_write+0xfc/0x160 vfs_write+0xfc/0x4e0 ksys_write+0x90/0x160 system_call_exception+0x178/0x320 system_call_common+0x160/0x2c4 The blocks of the firmware image are copied directly from user memory to objects allocated from flash_block_cache, so flash_block_cache must be created using kmem_cache_create_usercopy() to mark it safe for user access. Fixes: 6d07d1c ("usercopy: Restrict non-usercopy caches to size 0") Signed-off-by: Nathan Lynch <nathanl@linux.ibm.com> Reviewed-by: Kees Cook <keescook@chromium.org> [mpe: Trim and indent oops] Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://msgid.link/20230810-rtas-flash-vs-hardened-usercopy-v2-1-dcf63793a938@linux.ibm.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

[ Upstream commit c1f848f ] When the tdm lane mask is computed, the driver currently fills the 1st lane before moving on to the next. If the stream has less channels than the lanes can accommodate, slots will be disabled on the last lanes. Unfortunately, the HW distribute channels in a different way. It distribute channels in pair on each lanes before moving on the next slots. This difference leads to problems if a device has an interface with more than 1 lane and with more than 2 slots per lane. For example: a playback interface with 2 lanes and 4 slots each (total 8 slots - zero based numbering) - Playing a 8ch stream: - All slots activated by the driver - channel #2 will be played on lane #1 - slot #0 following HW placement - Playing a 4ch stream: - Lane #1 disabled by the driver - channel #2 will be played on lane #0 - slot #2 This behaviour is obviously not desirable. Change the way slots are activated on the TDM lanes to follow what the HW does and make sure each channel always get mapped to the same slot/lane. Fixes: 1a11d88 ("ASoC: meson: add tdm formatter base driver") Signed-off-by: Jerome Brunet <jbrunet@baylibre.com> Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com Signed-off-by: Mark Brown <broonie@kernel.org> Signed-off-by: Sasha Levin <sashal@kernel.org>

In FPGA environment, linux boot log is as the following. Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x411fd040] [ 0.000000] Linux version 6.6.1+ (user) (aarch64-xxx) #2 SMP PREEMPT time [ 0.000000] Machine model: AST2700 FPGA Change-Id: I15fdaa161f6a49d48adbc8c9ef766b6400126294 Signed-off-by: Kevin Chen <kevin_chen@aspeedtech.com>

ARM: config: aspeed-g5: Add device mapper support

ebe22f4

Swift will be using lvm2 for volume management which requires this device mapper driver. Signed-off-by: Adriana Kobylak <anoo@us.ibm.com>

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

ARM: config: aspeed-g5: Add device mapper support #2

ARM: config: aspeed-g5: Add device mapper support #2

anoo1 commented Jun 12, 2019

ARM: config: aspeed-g5: Add device mapper support #2

ARM: config: aspeed-g5: Add device mapper support #2

Conversation

anoo1 commented Jun 12, 2019