Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Clean up command guessing regexes and put spec before cucumber #212

Merged
merged 1 commit into from
Mar 23, 2013
Merged

Clean up command guessing regexes and put spec before cucumber #212

merged 1 commit into from
Mar 23, 2013

Conversation

ersatzryan
Copy link
Contributor

This allows for Capybara 2.0 RSpec DSL to be detected correctly

@ersatzryan
Clean up command guessing regexes and put spec before cucumber
a00dc32 
This allows for Capybara 2.0 RSpec DSL to be detected correctly
@ersatzryan ersatzryan mentioned this pull request Mar 22, 2013
Closed
colszowka added a commit that referenced this pull request Mar 23, 2013
@colszowka
Merge pull request #212 from ersatzryan/fix-spec-features
cab1ec1 
Clean up command guessing regexes and put spec before cucumber
@colszowka colszowka merged commit cab1ec1 into simplecov-ruby:master Mar 23, 2013
@colszowka
Copy link
Collaborator

Merged, thanks :)

@ersatzryan
Copy link
Contributor Author

No problem. Are you going to cut a new release?

@colszowka
Copy link
Collaborator

In the next week or so, I think. I want to add in some more minor things, and since the current master has some minor deprecations a version bump to 0.8 is due.

@colszowka
Copy link
Collaborator

(but you should be able to use the master branch for now by passing in github: 'colszowka/simplecov in your Gemfile ;) )

@ersatzryan
Copy link
Contributor Author

I had it pointed to my repo was going to wait to change it, if you were going to cut a new release soon. Instead of changing it twice.

@colszowka
Copy link
Collaborator

Yeah, 0.8.0 should be out over easter at the latest.

@ersatzryan
Copy link
Contributor Author

Any word on 0.8.0 release?

@BrandonMathis
Copy link

+1 this is really causing some wonky issues for me. I really wish a new version would be released soon with this fix.

@colszowka
Copy link
Collaborator

Yes guys, sorry. I got some more pull requests in that I want to put into 0.8.0, real soon now!

colszowka added a commit that referenced this pull request Apr 5, 2013
@colszowka
Bump to 0.8.0.pre so I can make the crowd in #212 happy quicker :)
a3387f7
@colszowka
Copy link
Collaborator

Hey again, just shipped a prerelease version 0.8.0.pre to rubygems so you can get your hands on this as soon as possible and to win me a little more time to get the 0.8.0 release feature-complete(tm) :)

jsonn pushed a commit to jsonn/pkgsrc that referenced this pull request Mar 15, 2014
Update ruby-simplecov to 0.8.2.
8e418e7 
v0.8.2, 2013-11-20 ([changes](simplecov-ruby/simplecov@v0.8.1...v0.8.2))
=====================

## Bugfixes

  * Replaced the locking behaviour [via lockfile gem](simplecov-ruby/simplecov#185) with
    plain Ruby explicit file locking when merging results. This should make simplecov merging to behave well
    on Windows again.
    See [#258](simplecov-ruby/simplecov#258) and
    [#223](simplecov-ruby/simplecov#223) (thanks to @tomykaira)

v0.8.1, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.8.0...v0.8.1))
=====================

## Bugfixes

  * Fixed a regression introduced in 0.8.0 - the Forwardable STDLIB module is now required explicitly.
    See [#256](simplecov-ruby/simplecov#256) (thanks to @kylev)

v0.8.0, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.7.1...v0.8.0))
=====================

**Note: Yanked the same day because of the regression that 0.8.1 fixes, see above**

## TL;DR

It's been way too long since the last official release 0.7.1, but this was partly due to it proving itself
quite stable in most circumstances. This release brings various further stability improvements to result set merging
(especially when working with parallel_tests), the configuration, source file encodings, and command name guessing.

The 0.8 line is the last one to cooperate with Ruby < 1.9. Starting with 0.9, SimpleCov will assume to be running in
Ruby 1.9+, and will not try to detect or bail silently on older Ruby versions. An appropriate deprecation warning
has been added.

## Features

  * Configuration blocks now have access to variables and methods outside of the block's scope.
    See [#238](simplecov-ruby/simplecov#238) (thanks to @ms-tg)
  * You can now have a global `~/.simplecov` configuration file.
    See [#195](simplecov-ruby/simplecov#195) (thanks to @spagalloco)
  * simplecov-html now uses the MIT-licensed colorbox plugin. Some adjustments when viewing source files,
    including retaining the currently open file on refresh have been added.
    See [simplecov-html #15](simplecov-ruby/simplecov-html#15) (thanks to @chetan)
  * Adds support for Rails 4 command guessing, removes default group `vendor/plugins`.
    See [#181](simplecov-ruby/simplecov#181) and
    [#203](simplecov-ruby/simplecov#203) (thanks to @semanticart and @phallstrom)
  * You can now load simplecov without the default settings by doing `require 'simplecov/no_defaults'`
    or setting `ENV['SIMPLECOV_NO_DEFAULTS']`. Check `simplecov/defaults` to see what preconfigurations are getting
    dropped by using this. See [#209](simplecov-ruby/simplecov#209) (thanks to @ileitch)
  * The result set merging now uses the `lockfile` gem to avoid race conditions.
    See [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol).
  * Automatically detect the usage of parallel_tests and adjust the command name with the test env number accordingly,
    See [#64](simplecov-ruby/simplecov#64) and
    [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol).

## Enhancements

  * Rename adapters to "profiles" given that they are bundles of settings. The old adapter methods are
    deprecated, but remain available for now.
    See [#207](simplecov-ruby/simplecov#207) (thanks to @mikerobe)
  * Tweaks to the automatic test suite naming. In particular, `rspec/features` should now
    be correctly attributed to RSpec, not Cucumber.
    See [#212](simplecov-ruby/simplecov#212) (thanks to @ersatzryan and @betelgeuse)
  * MiniTest should now be identified correctly by the command name guesser.
    See [#244](simplecov-ruby/simplecov#244) (thanks to @envygeeks)
  * Makes SimpleCov resilient to inclusion of mathn library.
    See [#175](simplecov-ruby/simplecov#175) and
    [#140](simplecov-ruby/simplecov#140) (thanks to @scotje)
  * Allow coverage_dir to be an absolute path.
  * See [#190](simplecov-ruby/simplecov#190) (thanks to @jshraibman-mdsol)
  * The internal cucumber test suite now uses Capybara 2.
    See [#206](simplecov-ruby/simplecov#206) (thanks to @infertux)
  * Work-arounds for the Coverage library shipped in JRuby 1.6 to behave in line with MRI.
    See [#174](simplecov-ruby/simplecov#174) (thanks to @grddev)
  * Fix warning: instance variable @exit_status not initialized.
    See [#242](simplecov-ruby/simplecov#242) and
    [#213](simplecov-ruby/simplecov#213) (thanks to @sferik and @infertux)

## Bugfixes

  * Correct result calculations for people using :nocov: tags.
    See [#215](simplecov-ruby/simplecov#215) (thanks to @aokolish)
  * Average hits per line for groups of files is now computed correctly.
    See [#192](http://github.com/colszowka/simplecov/pull/192) and
    [#179](http://github.com/colszowka/simplecov/issues/179) (thanks to @Graysonwright)
  * Compatability with BINARY internal encoding.
    See [#194](simplecov-ruby/simplecov#194) and
    [#127](simplecov-ruby/simplecov#127) (thanks to @justfalter)
  * Special characters in `SimpleCov.root` are now correctly escaped before being used as a RegExp.
    See [#204](simplecov-ruby/simplecov#204) and
    [#237](simplecov-ruby/simplecov#237) (thanks to @rli9)
jsonn pushed a commit to jsonn/pkgsrc that referenced this pull request Mar 17, 2014
Update ruby-simplecov to 0.8.2.
5993ca7 
v0.8.2, 2013-11-20 ([changes](simplecov-ruby/simplecov@v0.8.1...v0.8.2))
=====================

## Bugfixes

  * Replaced the locking behaviour [via lockfile gem](simplecov-ruby/simplecov#185) with
    plain Ruby explicit file locking when merging results. This should make simplecov merging to behave well
    on Windows again.
    See [#258](simplecov-ruby/simplecov#258) and
    [#223](simplecov-ruby/simplecov#223) (thanks to @tomykaira)

v0.8.1, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.8.0...v0.8.1))
=====================

## Bugfixes

  * Fixed a regression introduced in 0.8.0 - the Forwardable STDLIB module is now required explicitly.
    See [#256](simplecov-ruby/simplecov#256) (thanks to @kylev)

v0.8.0, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.7.1...v0.8.0))
=====================

**Note: Yanked the same day because of the regression that 0.8.1 fixes, see above**

## TL;DR

It's been way too long since the last official release 0.7.1, but this was partly due to it proving itself
quite stable in most circumstances. This release brings various further stability improvements to result set merging
(especially when working with parallel_tests), the configuration, source file encodings, and command name guessing.

The 0.8 line is the last one to cooperate with Ruby < 1.9. Starting with 0.9, SimpleCov will assume to be running in
Ruby 1.9+, and will not try to detect or bail silently on older Ruby versions. An appropriate deprecation warning
has been added.

## Features

  * Configuration blocks now have access to variables and methods outside of the block's scope.
    See [#238](simplecov-ruby/simplecov#238) (thanks to @ms-tg)
  * You can now have a global `~/.simplecov` configuration file.
    See [#195](simplecov-ruby/simplecov#195) (thanks to @spagalloco)
  * simplecov-html now uses the MIT-licensed colorbox plugin. Some adjustments when viewing source files,
    including retaining the currently open file on refresh have been added.
    See [simplecov-html #15](simplecov-ruby/simplecov-html#15) (thanks to @chetan)
  * Adds support for Rails 4 command guessing, removes default group `vendor/plugins`.
    See [#181](simplecov-ruby/simplecov#181) and
    [#203](simplecov-ruby/simplecov#203) (thanks to @semanticart and @phallstrom)
  * You can now load simplecov without the default settings by doing `require 'simplecov/no_defaults'`
    or setting `ENV['SIMPLECOV_NO_DEFAULTS']`. Check `simplecov/defaults` to see what preconfigurations are getting
    dropped by using this. See [#209](simplecov-ruby/simplecov#209) (thanks to @ileitch)
  * The result set merging now uses the `lockfile` gem to avoid race conditions.
    See [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol).
  * Automatically detect the usage of parallel_tests and adjust the command name with the test env number accordingly,
    See [#64](simplecov-ruby/simplecov#64) and
    [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol).

## Enhancements

  * Rename adapters to "profiles" given that they are bundles of settings. The old adapter methods are
    deprecated, but remain available for now.
    See [#207](simplecov-ruby/simplecov#207) (thanks to @mikerobe)
  * Tweaks to the automatic test suite naming. In particular, `rspec/features` should now
    be correctly attributed to RSpec, not Cucumber.
    See [#212](simplecov-ruby/simplecov#212) (thanks to @ersatzryan and @betelgeuse)
  * MiniTest should now be identified correctly by the command name guesser.
    See [#244](simplecov-ruby/simplecov#244) (thanks to @envygeeks)
  * Makes SimpleCov resilient to inclusion of mathn library.
    See [#175](simplecov-ruby/simplecov#175) and
    [#140](simplecov-ruby/simplecov#140) (thanks to @scotje)
  * Allow coverage_dir to be an absolute path.
  * See [#190](simplecov-ruby/simplecov#190) (thanks to @jshraibman-mdsol)
  * The internal cucumber test suite now uses Capybara 2.
    See [#206](simplecov-ruby/simplecov#206) (thanks to @infertux)
  * Work-arounds for the Coverage library shipped in JRuby 1.6 to behave in line with MRI.
    See [#174](simplecov-ruby/simplecov#174) (thanks to @grddev)
  * Fix warning: instance variable @exit_status not initialized.
    See [#242](simplecov-ruby/simplecov#242) and
    [#213](simplecov-ruby/simplecov#213) (thanks to @sferik and @infertux)

## Bugfixes

  * Correct result calculations for people using :nocov: tags.
    See [#215](simplecov-ruby/simplecov#215) (thanks to @aokolish)
  * Average hits per line for groups of files is now computed correctly.
    See [#192](http://github.com/colszowka/simplecov/pull/192) and
    [#179](http://github.com/colszowka/simplecov/issues/179) (thanks to @Graysonwright)
  * Compatability with BINARY internal encoding.
    See [#194](simplecov-ruby/simplecov#194) and
    [#127](simplecov-ruby/simplecov#127) (thanks to @justfalter)
  * Special characters in `SimpleCov.root` are now correctly escaped before being used as a RegExp.
    See [#204](simplecov-ruby/simplecov#204) and
    [#237](simplecov-ruby/simplecov#237) (thanks to @rli9)
jsonn pushed a commit to jsonn/pkgsrc that referenced this pull request Oct 11, 2014
Update ruby-simplecov to 0.8.2.
c5c236b 
v0.8.2, 2013-11-20 ([changes](simplecov-ruby/simplecov@v0.8.1...v0.8.2))
=====================

## Bugfixes

  * Replaced the locking behaviour [via lockfile gem](simplecov-ruby/simplecov#185) with
    plain Ruby explicit file locking when merging results. This should make simplecov merging to behave well
    on Windows again.
    See [#258](simplecov-ruby/simplecov#258) and
    [#223](simplecov-ruby/simplecov#223) (thanks to @tomykaira)

v0.8.1, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.8.0...v0.8.1))
=====================

## Bugfixes

  * Fixed a regression introduced in 0.8.0 - the Forwardable STDLIB module is now required explicitly.
    See [#256](simplecov-ruby/simplecov#256) (thanks to @kylev)

v0.8.0, 2013-11-10 ([changes](simplecov-ruby/simplecov@v0.7.1...v0.8.0))
=====================

**Note: Yanked the same day because of the regression that 0.8.1 fixes, see above**

## TL;DR

It's been way too long since the last official release 0.7.1, but this was partly due to it proving itself
quite stable in most circumstances. This release brings various further stability improvements to result set merging
(especially when working with parallel_tests), the configuration, source file encodings, and command name guessing.

The 0.8 line is the last one to cooperate with Ruby < 1.9. Starting with 0.9, SimpleCov will assume to be running in
Ruby 1.9+, and will not try to detect or bail silently on older Ruby versions. An appropriate deprecation warning
has been added.

## Features

  * Configuration blocks now have access to variables and methods outside of the block's scope.
    See [#238](simplecov-ruby/simplecov#238) (thanks to @ms-tg)
  * You can now have a global `~/.simplecov` configuration file.
    See [#195](simplecov-ruby/simplecov#195) (thanks to @spagalloco)
  * simplecov-html now uses the MIT-licensed colorbox plugin. Some adjustments when viewing source files,
    including retaining the currently open file on refresh have been added.
    See [simplecov-html #15](simplecov-ruby/simplecov-html#15) (thanks to @chetan)
  * Adds support for Rails 4 command guessing, removes default group `vendor/plugins`.
    See [#181](simplecov-ruby/simplecov#181) and
    [#203](simplecov-ruby/simplecov#203) (thanks to @semanticart and @phallstrom)
  * You can now load simplecov without the default settings by doing `require 'simplecov/no_defaults'`
    or setting `ENV['SIMPLECOV_NO_DEFAULTS']`. Check `simplecov/defaults` to see what preconfigurations are getting
    dropped by using this. See [#209](simplecov-ruby/simplecov#209) (thanks to @ileitch)
  * The result set merging now uses the `lockfile` gem to avoid race conditions.
    See [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol).
  * Automatically detect the usage of parallel_tests and adjust the command name with the test env number accordingly,
    See [#64](simplecov-ruby/simplecov#64) and
    [#185](simplecov-ruby/simplecov#185) (thanks to @jshraibman-mdsol).

## Enhancements

  * Rename adapters to "profiles" given that they are bundles of settings. The old adapter methods are
    deprecated, but remain available for now.
    See [#207](simplecov-ruby/simplecov#207) (thanks to @mikerobe)
  * Tweaks to the automatic test suite naming. In particular, `rspec/features` should now
    be correctly attributed to RSpec, not Cucumber.
    See [#212](simplecov-ruby/simplecov#212) (thanks to @ersatzryan and @betelgeuse)
  * MiniTest should now be identified correctly by the command name guesser.
    See [#244](simplecov-ruby/simplecov#244) (thanks to @envygeeks)
  * Makes SimpleCov resilient to inclusion of mathn library.
    See [#175](simplecov-ruby/simplecov#175) and
    [#140](simplecov-ruby/simplecov#140) (thanks to @scotje)
  * Allow coverage_dir to be an absolute path.
  * See [#190](simplecov-ruby/simplecov#190) (thanks to @jshraibman-mdsol)
  * The internal cucumber test suite now uses Capybara 2.
    See [#206](simplecov-ruby/simplecov#206) (thanks to @infertux)
  * Work-arounds for the Coverage library shipped in JRuby 1.6 to behave in line with MRI.
    See [#174](simplecov-ruby/simplecov#174) (thanks to @grddev)
  * Fix warning: instance variable @exit_status not initialized.
    See [#242](simplecov-ruby/simplecov#242) and
    [#213](simplecov-ruby/simplecov#213) (thanks to @sferik and @infertux)

## Bugfixes

  * Correct result calculations for people using :nocov: tags.
    See [#215](simplecov-ruby/simplecov#215) (thanks to @aokolish)
  * Average hits per line for groups of files is now computed correctly.
    See [#192](http://github.com/colszowka/simplecov/pull/192) and
    [#179](http://github.com/colszowka/simplecov/issues/179) (thanks to @Graysonwright)
  * Compatability with BINARY internal encoding.
    See [#194](simplecov-ruby/simplecov#194) and
    [#127](simplecov-ruby/simplecov#127) (thanks to @justfalter)
  * Special characters in `SimpleCov.root` are now correctly escaped before being used as a RegExp.
    See [#204](simplecov-ruby/simplecov#204) and
    [#237](simplecov-ruby/simplecov#237) (thanks to @rli9)
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Reviewers
No reviews
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

Successfully merging this pull request may close these issues.
3 participants
@ersatzryan @colszowka @BrandonMathis