Aosu SolarCam D1 Classic

[maximprokhor]

Hi Thingino team,

I own an Aosu SolarCam D1 Classic, model C9C2CA11, and would like to use it locally via RTSP without depending on Aosu’s cloud.

I found your Aosu C5L installation guide. Could you confirm whether an existing C5L firmware image could work on my camera, or whether it would require a separate port?

I opened the camera and identified these markings:

• SoC: Ingenic T31. The secondary marking -ZL
• Flash: FM25Q128AI3 — 128 Mbit / 16 MiB.
• Wireless chip: XR8710.
• PCB: C9L-MB V3.0.
• FCC ID: 2A2VW-C9L.

This is a battery-powered camera with solar charging. I understand that the documented C5L hardware uses RTL8188FTV, so I am particularly concerned about wireless compatibility and power management.

Could you please advise:

1. Is any existing Thingino build suitable for this hardware, particularly the XR8710?
2. Is there a known way to boot from microSD and back up the original flash without overwriting it, before attempting installation?
3. What additional photos, chip markings, or boot logs would help you assess compatibility?

I use a Mac and have a 32 GB microSD card, but currently no USB–UART adapter or flash programmer. I have not flashed the camera or attempted the flash-glitch procedure.

Thank you for your help!

Max