Code for minithesis about Congklak Arduino

Load Cell source code for an Arduino Uno

An open source board for load cell reading and configuration based on the HX711 and ATmega328.

A breakout board for the HX711 load cell weight measuring amplifier

Library to readout standard loadcells with the internal ADC/PGA of the Teensy 3.2

Powder-dispenser. School project 2020 - third semester

Trabalho de Conclusão de Curso: Protótipo de Prateleira Inteligente com Arduino.

A library to stabilize load cell readings

Arduino Wemos D1 basic seismometer. Creates SD card file, opens, writes, prints out. Tested with 64GB SD. Takes reading when values above / below set limits. XFW-HX711 Load Cell A2D. RTC DS1307. WeMos Micro SD Shield. IDE Info = WeMos D1R1 (ESP8266 Boards 2.5.2), upload 921600, 80MHz, WeMos D1R1 Boards 2

A load cell measures the weight using strain gauges. The difference between the length of the load cell at one side of the cell will help in determining the weight that is applied to it. This will change the output impedance. The output impedance is integrated into a Wheatstone bridge where the difference of the output impedance determines and c…

Web based weight monitoring system using esp8266.

A Raspberry Pi Library to interface Avia Semiconductor HX711 24-Bit Analog-to-Digital Converter (ADC) for Weight Scales

A linux library to interface with load cells using NAU7802.

Design for the science olympiad detector building device (2022-2023 season)

A jig designed to measure the pulling force of magnets

Weight scale using Sparkfun's OpenScale

a box that screams at you when taking to many sweets

Raspberry Pi HX711 C++ Library

The implementation of a railway safety management project using Arduino is an innovative and practical approach to ensuring the safety and efficiency of railway systems. Arduino, being an open-source electronic platform with a wide range of compatible sensors and modules, provides a flexible and cost-effective solution for monitoring