High precission SHT2x hygrometer (humidity and temperature sensor) in form of MLAB module.

Displays simple text messages and allow interaction with system via some buttons.

Module with LCD 2 line display, 4 buttons and piezo

The processor module for MICROCHIP PIC16F87x in TQFP44 package consists of processor, headers, programming header and RESET push button.

Humidity sensor based on HIH-5030/5031 chip. Analog output is ratiometric.

MII standard interface ethernet module with full PoE compatibility.

None

Displays simple text messages and allow interaction with system via some buttons.

Processor module for AVR software version of (Low Speed) USB. May be used as ISP AVR programmer (with USBasp firmware), or USB to I2C convertor (with i2c-tiny-usb firmware). Uses ATmega88 in TQFP32 package.

Singe cell Li-ion battery management module

Single output I2C programmable clock generator.

STM32 10X series dovelopment module.

Measure time intervals up to 4us with precision 65ps. Also is capable for measure temperature (with 16bit resolution) if module is connected to temperature sensor such as PT1000.

The MCU module for MICROCHIP PIC18F4550 in TQFP44 package, programming header, USB interface and RESET push button.

Processor module for ATMEL ATmega8 in TQFP32 package. The module contains processor and standard crystal or clock crystal can be used. There is RESET push button and ATMEL ISP 6 PIN connector.

Module for work with PIC18F MCU in TQFP80 package. On PCB is a bias resistor for Ethernet peripheral.

The sensor uses modulated infrared signal for distant detection of obstacles. It mmaybe seen as virtual feeler for roboot. The sensor uses processor ATtiny and infraredsensor for remote control. The modulation and statistical processing of the signalgives the sensor good noise imunity.

High-precision digital thermometer utilizing the MAX31725 IC. It offers I2C connectivity. Designed for a temperature range of -55°C to +150°C.