The pilot vehicle rounds the city daily and sends the pothole coordinates to the cloud. The app will display the pothole and if the user is near the pothole, the user will be alerted.

neo6m gps navigate for esp32

Complete code for car GPS, with stm32f103c8( HAL library), sim800l, NEO-6m, in SLEEP mode

Bus Tracker Project: Hardware Code/Design

neo-6m gps module data collection using serial port and plot relevant graphs using matplotlib

Internship at ACIC-KIF

In this repository you can find how to make your own GPS tracker that can be monitored over the internet

This is a project I'm working on so I can have cruise control in my car. It uses GPS in order to monitor the speed of your vehicle, and shows your speed on the OLED display. It allows you to set your desired speed limit using two push buttons. If you speed, the device screams - the pitch changing with your speeding.

The pilot vehicle rounds the city daily and sends the pothole coordinates to the cloud. The app will display the pothole and if the user is near the pothole, the user will be alerted

Our Tracking system enables real-time GPS tracking and management of location data

GPS-based local relative navigation system for group of up to 6 members

A C++ program to read GPS data from neo 6m and display the current speed on a 7-seg display

GPS Tracker with GSM connection, logging to SDcard, sending data to mqtt server

Weather station with remote sensors and TFT color display

IoT to fullstack vehicle tracking application

STM32 libraries for some modules and sensors

This repository has the code that was developed for our CanSat for sensor fusion, control algorithms as well as communication with ground station.

Experiments with TTGO module

Architecture implementation for data acquisition and pre-processing with RPi4 and RPi2, PiCam and GPS for the part-time extra-curricular work in Luxoft.

Selfbuild GPS hack project for the apt Motorcyclist of 2018: Rasperry Pi 2 + Neo 6 GPS + Navit + 3D printed Case