Skip to content
For stream protocol. syncing upstreams from etcd or consul and so on, dynamically updating backend servers attribute, not need to reload nginx for tcp protocol, stream configure.
Branch: master
Clone or download
Permalink
Type Name Latest commit message Commit time
Failed to load latest commit information.
src
test
README.md update readme for nginx-upsync module Jan 18, 2018
config Build fixes for compiling as a dynamic module (#12) Oct 26, 2016

README.md

Name

nginx-stream-upsync-module - Nginx C module, sync upstreams from consul or others, dynamically modify backend-servers attribute(weight, max_fails,...), needn't reload nginx.

It may not always be convenient to modify configuration files and restart NGINX. For example, if you are experiencing large amounts of traffic and high load, restarting NGINX and reloading the configuration at that point further increases load on the system and can temporarily degrade performance.

The module can be more smoothly expansion and constriction, and will not influence the performance.

Another module, nginx-upsync-module supports nginx http module(HTTP protocol), please be noticed.

If you want to use nginx-upsync-module and nginx-stream-upsync-module both, please refer to nginx-upsync.

Table of Contents

Status

This module is still under active development and is considered production ready.

Synopsis

nginx-consul:

stream {
    upstream test {
        upsync 127.0.0.1:8500/v1/kv/upstreams/test/ upsync_timeout=6m upsync_interval=500ms upsync_type=consul strong_dependency=off;
        upsync_dump_path /usr/local/nginx/conf/servers/servers_test.conf;

        include /usr/local/nginx/conf/servers/servers_test.conf;
    }

    upstream bar {
        server 127.0.0.1:8090 weight=1 fail_timeout=10 max_fails=3;
    }

    server {
        listen 12345;

        proxy_connect_timeout 1s;
        proxy_timeout 3s;
        proxy_pass test;
    }

    server {
        listen 2345;

        upstream_show
    }

    server {
        listen 127.0.0.1:9091;

        proxy_responses 1;
        proxy_timeout 20s;
        proxy_pass bar;
    }
}

nginx-etcd:

stream {
    upstream test {
        upsync 127.0.0.1:2379/v2/keys/upstreams/test upsync_timeout=6m upsync_interval=500ms upsync_type=etcd strong_dependency=off;
        upsync_dump_path /usr/local/nginx/conf/servers/servers_test.conf;

        include /usr/local/nginx/conf/servers/servers_test.conf;
    }

    upstream bar {
        server 127.0.0.1:8090 weight=1 fail_timeout=10 max_fails=3;
    }

    server {
        listen 12345;

        proxy_connect_timeout 1s;
        proxy_timeout 3s;
        proxy_pass test;
    }

    server {
        listen 2345;

        upstream_show
    }

    server {
        listen 127.0.0.1:9091;

        proxy_responses 1;
        proxy_timeout 20s;
        proxy_pass bar;
    }
}

upsync_lb:

stream {
    upstream test {
        least_conn; //hash $uri consistent;

        upsync 127.0.0.1:8500/v1/kv/upstreams/test/ upsync_timeout=6m upsync_interval=500ms upsync_type=consul strong_dependency=off;
        upsync_dump_path /usr/local/nginx/conf/servers/servers_test.conf;
        upsync_lb least_conn; //hash_ketama;

        include /usr/local/nginx/conf/servers/servers_test.conf;
    }

    upstream bar {
        server 127.0.0.1:8090 weight=1 fail_timeout=10 max_fails=3;
    }

    server {
        listen 12345;

        proxy_connect_timeout 1s;
        proxy_timeout 3s;
        proxy_pass test;
    }

    server {
        listen 2345;

        upstream_show
    }

    server {
        listen 127.0.0.1:9091;

        proxy_responses 1;
        proxy_timeout 20s;
        proxy_pass bar;
    }
}

NOTE: upstream: include command is neccesary, first time the dumped file should include all the servers.

Back to TOC

Description

This module provides a method to discover backend servers. Supporting dynamicly adding or deleting backend server through consul/etcd and dynamicly adjusting backend servers weight, module will timely pull new backend server list from consul/etcd to upsync nginx ip router. Nginx needn't reload. Having some advantages than others:

  • timely

    module send key to consul/etcd with index, consul/etcd will compare it with its index, if index doesn't change connection will hang five minutes, in the period any operation to the key-value, will feed back rightaway.
    
  • performance

    Pulling from consul/etcd equal a request to nginx, updating ip router nginx needn't reload, so affecting nginx performance is little.
    
  • stability

    Even if one pulling failed, it will pull next upsync_interval, so guaranteing backend server stably provides service. And support dumping the latest config to location, so even if consul/etcd hung up, and nginx can be reload anytime. 
    

Back to TOC

Directives

upsync

syntax: upsync $consul/etcd.api.com:$port/v1/kv/upstreams/$upstream_name/ [upsync_type=consul/etcd] [upsync_interval=second/minutes] [upsync_timeout=second/minutes] [strong_dependency=off/on]

default: none, if parameters omitted, default parameters are upsync_interval=5s upsync_timeout=6m strong_dependency=off

context: upstream

description: Pull upstream servers from consul/etcd... .

The parameters' meanings are:

  • upsync_interval

    pulling servers from consul/etcd interval time.

  • upsync_timeout

    pulling servers from consul/etcd request timeout.

  • upsync_type

    pulling servers from conf server type.

  • strong_dependency

    when nginx start up if strong_dependency is on that means servers will be depended on consul/etcd and will pull servers from consul/etcd.

upsync_dump_path

syntax: upsync_dump_path $path

default: /tmp/servers_$host.conf

context: upstream

description: dump the upstream backends to the $path.

upsync_lb

syntax: upsync_lb $load_balance

default: round_robin/ip_hash/hash modula

context: upstream

description: mainly for least_conn and hash consistent, when using one of them, you must point out using upsync_lb.

upsync_show

syntax: upsync_show

default: none

context: server

description: show all upstreams.

curl http://localhost:2345/upstream_show

show all upstreams

Back to TOC

Consul_interface

Data can be taken from key/value store or service catalog. In the first case parameter upsync_type of directive must be consul. For example

    upsync 127.0.0.1:8500/v1/kv/upstreams/test upsync_timeout=6m upsync_interval=500ms upsync_type=consul strong_dependency=off;

In the second case it must be consul_services.

    upsync 127.0.0.1:8500/v1/catalog/service/test upsync_timeout=6m upsync_interval=500ms upsync_type=consul_services strong_dependency=off;

you can add or delete backend server through consul_ui or http_interface. Below are examples for key/value store.

http_interface example:

  • add
    curl -X PUT http://$consul_ip:$port/v1/kv/upstreams/$upstream_name/$backend_ip:$backend_port
default: weight=1 max_fails=2 fail_timeout=10 down=0 backup=0;
    curl -X PUT -d "{\"weight\":1, \"max_fails\":2, \"fail_timeout\":10}" http://$consul_ip:$port/v1/kv/$dir1/$upstream_name/$backend_ip:$backend_port
or
    curl -X PUT -d '{"weight":1, "max_fails":2, "fail_timeout":10}' http://$consul_ip:$port/v1/kv/$dir1/$upstream_name/$backend_ip:$backend_port
value support json format.
  • delete
    curl -X DELETE http://$consul_ip:$port/v1/kv/upstreams/$upstream_name/$backend_ip:$backend_port
  • adjust-weight
    curl -X PUT -d "{\"weight\":2, \"max_fails\":2, \"fail_timeout\":10}" http://$consul_ip:$port/v1/kv/$dir1/$upstream_name/$backend_ip:$backend_port
or
    curl -X PUT -d '{"weight":2, "max_fails":2, "fail_timeout":10}' http://$consul_ip:$port/v1/kv/$dir1/$upstream_name/$backend_ip:$backend_port
  • mark server-down
    curl -X PUT -d "{\"weight\":2, \"max_fails\":2, \"fail_timeout\":10, \"down\":1}" http://$consul_ip:$port/v1/kv/$dir1/$upstream_name/$backend_ip:$backend_port
or
    curl -X PUT -d '{"weight":2, "max_fails":2, "fail_timeout":10, "down":1}' http://$consul_ip:$port/v1/kv/$dir1/$upstream_name/$backend_ip:$backend_port
  • check
    curl http://$consul_ip:$port/v1/kv/upstreams/$upstream_name?recurse

Back to TOC

Etcd_interface

you can add or delete backend server through http_interface.

mainly like etcd, http_interface example:

  • add
    curl -X PUT http://$etcd_ip:$port/v2/keys/upstreams/$upstream_name/$backend_ip:$backend_port
default: weight=1 max_fails=2 fail_timeout=10 down=0 backup=0;
    curl -X PUT -d value="{\"weight\":1, \"max_fails\":2, \"fail_timeout\":10}" http://$etcd_ip:$port/v2/keys/$dir1/$upstream_name/$backend_ip:$backend_port
value support json format.
  • delete
    curl -X DELETE http://$etcd_ip:$port/v2/keys/upstreams/$upstream_name/$backend_ip:$backend_port
  • adjust-weight
    curl -X PUT -d "{\"weight\":2, \"max_fails\":2, \"fail_timeout\":10}" http://$etcd_ip:$port/v2/keys/$dir1/$upstream_name/$backend_ip:$backend_port
  • mark server-down
    curl -X PUT -d value="{\"weight\":2, \"max_fails\":2, \"fail_timeout\":10, \"down\":1}" http://$etcd_ip:$port/v2/keys/$dir1/$upstream_name/$backend_ip:$backend_port
  • check
    curl http://$etcd_ip:$port/v2/keys/upstreams/$upstream_name

Back to TOC

TODO

  • support zookeeper and so on

Back to TOC

Compatibility

The module was developed base on nginx-1.9.10.

Master branch compatible with nginx-1.11.0+.

Nginx-1.10.3- branch compatible with nginx-1.9.10 ~ nginx-1.11.0+.

Back to TOC

Installation

This module can be used independently, can be downloadGithub.

Grab the nginx source code from nginx.org, for example, the version 1.8.0 (see nginx compatibility), and then build the source with this module:

wget 'http://nginx.org/download/nginx-1.8.0.tar.gz'
tar -xzvf nginx-1.8.0.tar.gz
cd nginx-1.8.0/
./configure --add-module=/path/to/nginx-stream_upsync-module
make
make install

if you support nginx-upstream-check-module

./configure --add-module=/path/to/nginx-upstream-check-module --add-module=/path/to/nginx-stream_upsync-module
make
make install

Back to TOC

Code style

Code style is mainly based on style

Back to TOC

Author

Xiaokai Wang (王晓开) xiaokai.wang@live.com, Weibo Inc.

Back to TOC

Copyright and License

This README template copy from agentzh.

This module is licensed under the BSD license.

Copyright (C) 2014 by Xiaokai Wang xiaokai.wang@live.com/xiaokai.wang@live.com

All rights reserved.

Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met:

  • Redistributions of source code must retain the above copyright notice, this list of conditions and the following disclaimer.

  • Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution.

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

Back to TOC

see also

back to toc

source dependency

back to toc

You can’t perform that action at this time.