Add support for Duowen PCIe subsystem #1
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Signed-off-by: Ge Song <songgebird@gmail.com>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
If GPU components have failed to bind, shutdown callback would fail with the following backtrace. Add safeguard check to stop that oops from happening and allow the board to reboot. [ 66.617046] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 66.626066] Mem abort info: [ 66.628939] ESR = 0x96000006 [ 66.632088] EC = 0x25: DABT (current EL), IL = 32 bits [ 66.637542] SET = 0, FnV = 0 [ 66.640688] EA = 0, S1PTW = 0 [ 66.643924] Data abort info: [ 66.646889] ISV = 0, ISS = 0x00000006 [ 66.650832] CM = 0, WnR = 0 [ 66.653890] user pgtable: 4k pages, 48-bit VAs, pgdp=0000000107f81000 [ 66.660505] [0000000000000000] pgd=0000000100bb2003, p4d=0000000100bb2003, pud=0000000100897003, pmd=0000000000000000 [ 66.671398] Internal error: Oops: 96000006 [#1] PREEMPT SMP [ 66.677115] Modules linked in: [ 66.680261] CPU: 6 PID: 352 Comm: reboot Not tainted 5.11.0-rc2-00309-g79e3faa756b2 torvalds#38 [ 66.688473] Hardware name: Qualcomm Technologies, Inc. Robotics RB5 (DT) [ 66.695347] pstate: 60400005 (nZCv daif +PAN -UAO -TCO BTYPE=--) [ 66.701507] pc : msm_atomic_commit_tail+0x78/0x4e0 [ 66.706437] lr : commit_tail+0xa4/0x184 [ 66.710381] sp : ffff8000108f3af0 [ 66.713791] x29: ffff8000108f3af0 x28: ffff418c44337000 [ 66.719242] x27: 0000000000000000 x26: ffff418c40a24490 [ 66.724693] x25: ffffd3a842a4f1a0 x24: 0000000000000008 [ 66.730146] x23: ffffd3a84313f030 x22: ffff418c444ce000 [ 66.735598] x21: ffff418c408a4980 x20: 0000000000000000 [ 66.741049] x19: 0000000000000000 x18: ffff800010710fbc [ 66.746500] x17: 000000000000000c x16: 0000000000000001 [ 66.751954] x15: 0000000000010008 x14: 0000000000000068 [ 66.757405] x13: 0000000000000001 x12: 0000000000000000 [ 66.762855] x11: 0000000000000001 x10: 00000000000009b0 [ 66.768306] x9 : ffffd3a843192000 x8 : ffff418c44337000 [ 66.773757] x7 : 0000000000000000 x6 : 00000000a401b34e [ 66.779210] x5 : 00ffffffffffffff x4 : 0000000000000000 [ 66.784660] x3 : 0000000000000000 x2 : ffff418c444ce000 [ 66.790111] x1 : ffffd3a841dce530 x0 : ffff418c444cf000 [ 66.795563] Call trace: [ 66.798075] msm_atomic_commit_tail+0x78/0x4e0 [ 66.802633] commit_tail+0xa4/0x184 [ 66.806217] drm_atomic_helper_commit+0x160/0x390 [ 66.811051] drm_atomic_commit+0x4c/0x60 [ 66.815082] drm_atomic_helper_disable_all+0x1f4/0x210 [ 66.820355] drm_atomic_helper_shutdown+0x80/0x130 [ 66.825276] msm_pdev_shutdown+0x14/0x20 [ 66.829303] platform_shutdown+0x28/0x40 [ 66.833330] device_shutdown+0x158/0x330 [ 66.837357] kernel_restart+0x40/0xa0 [ 66.841122] __do_sys_reboot+0x228/0x250 [ 66.845148] __arm64_sys_reboot+0x28/0x34 [ 66.849264] el0_svc_common.constprop.0+0x74/0x190 [ 66.854187] do_el0_svc+0x24/0x90 [ 66.857595] el0_svc+0x14/0x20 [ 66.860739] el0_sync_handler+0x1a4/0x1b0 [ 66.864858] el0_sync+0x174/0x180 [ 66.868269] Code: 1ac020a0 2a000273 eb02007f 54ffff01 (f9400285) [ 66.874525] ---[ end trace 20dedb2a3229fec8 ]--- Fixes: 9d5cbf5 ("drm/msm: add shutdown support for display platform_driver") Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
When putting iMX5 into suspend, the following flow is observed: [ 70.023427] [<c07755f0>] (msm_atomic_commit_tail) from [<c06e7218>] (commit_tail+0x9c/0x18c) [ 70.031890] [<c06e7218>] (commit_tail) from [<c0e2920c>] (drm_atomic_helper_commit+0x1a0/0x1d4) [ 70.040627] [<c0e2920c>] (drm_atomic_helper_commit) from [<c06e74d4>] (drm_atomic_helper_disable_all+0x1c4/0x1d4) [ 70.050913] [<c06e74d4>] (drm_atomic_helper_disable_all) from [<c0e2943c>] (drm_atomic_helper_suspend+0xb8/0x170) [ 70.061198] [<c0e2943c>] (drm_atomic_helper_suspend) from [<c06e84bc>] (drm_mode_config_helper_suspend+0x24/0x58) In the i.MX5 case, priv->kms is not populated (as i.MX5 does not use any of the Qualcomm display controllers), causing a NULL pointer dereference in msm_atomic_commit_tail(): [ 24.268964] 8<--- cut here --- [ 24.274602] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 24.283434] pgd = (ptrval) [ 24.286387] [00000000] *pgd=ca212831 [ 24.290788] Internal error: Oops: 17 [#1] SMP ARM [ 24.295609] Modules linked in: [ 24.298777] CPU: 0 PID: 197 Comm: init Not tainted 5.11.0-rc2-next-20210111 torvalds#333 [ 24.306276] Hardware name: Freescale i.MX53 (Device Tree Support) [ 24.312442] PC is at msm_atomic_commit_tail+0x54/0xb9c [ 24.317743] LR is at commit_tail+0xa4/0x1b0 Fix the problem by calling drm_mode_config_helper_suspend/resume() only when priv->kms is available. Fixes: ca8199f ("drm/msm/dpu: ensure device suspend happens during PM sleep") Signed-off-by: Fabio Estevam <festevam@gmail.com> Signed-off-by: Rob Clark <robdclark@chromium.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
The kernel may be built with multiple LSMs, but only a subset may be enabled on the boot command line by specifying "lsm=". Not including "integrity" on the ordered LSM list may result in a NULL deref. As reported by Dmitry Vyukov: in qemu: qemu-system-x86_64 -enable-kvm -machine q35,nvdimm -cpu max,migratable=off -smp 4 -m 4G,slots=4,maxmem=16G -hda wheezy.img -kernel arch/x86/boot/bzImage -nographic -vga std -soundhw all -usb -usbdevice tablet -bt hci -bt device:keyboard -net user,host=10.0.2.10,hostfwd=tcp::10022-:22 -net nic,model=virtio-net-pci -object memory-backend-file,id=pmem1,share=off,mem-path=/dev/zero,size=64M -device nvdimm,id=nvdimm1,memdev=pmem1 -append "console=ttyS0 root=/dev/sda earlyprintk=serial rodata=n oops=panic panic_on_warn=1 panic=86400 lsm=smack numa=fake=2 nopcid dummy_hcd.num=8" -pidfile vm_pid -m 2G -cpu host But it crashes on NULL deref in integrity_inode_get during boot: Run /sbin/init as init process BUG: kernel NULL pointer dereference, address: 000000000000001c PGD 0 P4D 0 Oops: 0000 [#1] PREEMPT SMP KASAN CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc2+ torvalds#97 Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS rel-1.13.0-44-g88ab0c15525c-prebuilt.qemu.org 04/01/2014 RIP: 0010:kmem_cache_alloc+0x2b/0x370 mm/slub.c:2920 Code: 57 41 56 41 55 41 54 41 89 f4 55 48 89 fd 53 48 83 ec 10 44 8b 3d d9 1f 90 0b 65 48 8b 04 25 28 00 00 00 48 89 44 24 08 31 c0 <8b> 5f 1c 4cf RSP: 0000:ffffc9000032f9d8 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff888017fc4f00 RCX: 0000000000000000 RDX: ffff888040220000 RSI: 0000000000000c40 RDI: 0000000000000000 RBP: 0000000000000000 R08: 0000000000000000 R09: ffff888019263627 R10: ffffffff83937cd1 R11: 0000000000000000 R12: 0000000000000c40 R13: ffff888019263538 R14: 0000000000000000 R15: 0000000000ffffff FS: 0000000000000000(0000) GS:ffff88802d180000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 000000000000001c CR3: 000000000b48e000 CR4: 0000000000750ee0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 PKRU: 55555554 Call Trace: integrity_inode_get+0x47/0x260 security/integrity/iint.c:105 process_measurement+0x33d/0x17e0 security/integrity/ima/ima_main.c:237 ima_bprm_check+0xde/0x210 security/integrity/ima/ima_main.c:474 security_bprm_check+0x7d/0xa0 security/security.c:845 search_binary_handler fs/exec.c:1708 [inline] exec_binprm fs/exec.c:1761 [inline] bprm_execve fs/exec.c:1830 [inline] bprm_execve+0x764/0x19a0 fs/exec.c:1792 kernel_execve+0x370/0x460 fs/exec.c:1973 try_to_run_init_process+0x14/0x4e init/main.c:1366 kernel_init+0x11d/0x1b8 init/main.c:1477 ret_from_fork+0x1f/0x30 arch/x86/entry/entry_64.S:294 Modules linked in: CR2: 000000000000001c ---[ end trace 22d601a500de7d79 ]--- Since LSMs and IMA may be configured at build time, but not enabled at run time, panic the system if "integrity" was not initialized before use. Reported-by: Dmitry Vyukov <dvyukov@google.com> Fixes: 79f7865 ("LSM: Introduce "lsm=" for boottime LSM selection") Cc: stable@vger.kernel.org Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
The structures are used as place holders, so they are modified at run-time. Obviously they may not be constants. BUG: unable to handle page fault for address: d0643220 ... CPU: 0 PID: 110 Comm: modprobe Not tainted 5.11.0+ #1 Hardware name: Intel Corp. QUARK/GalileoGen2, BIOS 0x01000200 01/01/2014 EIP: intel_quark_mfd_probe+0x93/0x1c0 [intel_quark_i2c_gpio] This partially reverts the commit c4a164f. While at it, add a comment to avoid similar changes in the future. Fixes: c4a164f ("mfd: Constify static struct resources") Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Rikard Falkeborn <rikard.falkeborn@gmail.com> Tested-by: Tong Zhang <ztong0001@gmail.com> Signed-off-by: Lee Jones <lee.jones@linaro.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
…tint We have a cycle of callbacks scheduling works which submit URBs with thos callbacks. This needs to be blocked, stopped and unblocked to untangle the circle. The issue leads to faults like: [ 55.068392] Unable to handle kernel paging request at virtual address 6b6b6c03 [ 55.075624] pgd = be866494 [ 55.078335] [6b6b6c03] *pgd=00000000 [ 55.081924] Internal error: Oops: 5 [#1] PREEMPT SMP ARM [ 55.087238] Modules linked in: ppp_async crc_ccitt ppp_generic slhc xt_TCPMSS xt_tcpmss xt_hl nf_log_ipv6 nf_log_ipv4 nf_log_common xt_policy xt_limit xt_conntrack xt_tcpudp xt_pkttype ip6table_mangle iptable_nat nf_nat nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle ip6table_filter ip6_tables iptable_filter ip_tables des_generic md5 sch_fq_codel cdc_mbim cdc_wdm cdc_ncm usbnet mii cdc_acm usb_storage ip_tunnel xfrm_user xfrm6_tunnel tunnel6 xfrm4_tunnel tunnel4 esp6 esp4 ah6 ah4 xfrm_algo xt_LOG xt_LED xt_comment x_tables ipv6 [ 55.134954] CPU: 0 PID: 82 Comm: kworker/0:2 Tainted: G T 5.8.17 #1 [ 55.142526] Hardware name: Freescale i.MX7 Dual (Device Tree) [ 55.148304] Workqueue: events acm_softint [cdc_acm] [ 55.153196] PC is at kobject_get+0x10/0xa4 [ 55.157302] LR is at usb_get_dev+0x14/0x1c [ 55.161402] pc : [<8047c06c>] lr : [<80560448>] psr: 20000193 [ 55.167671] sp : bca39ea8 ip : 00007374 fp : bf6cbd80 [ 55.172899] r10: 00000000 r9 : bdd92284 r8 : bdd92008 [ 55.178128] r7 : 6b6b6b6b r6 : fffffffe r5 : 60000113 r4 : 6b6b6be3 [ 55.184658] r3 : 6b6b6b6b r2 : 00000111 r1 : 00000000 r0 : 6b6b6be3 [ 55.191191] Flags: nzCv IRQs off FIQs on Mode SVC_32 ISA ARM Segment none [ 55.198417] Control: 10c5387d Table: bcf0c06a DAC: 00000051 [ 55.204168] Process kworker/0:2 (pid: 82, stack limit = 0x9bdd2a89) [ 55.210439] Stack: (0xbca39ea8 to 0xbca3a000) [ 55.214805] 9ea0: bf6cbd80 80769a50 6b6b6b6b 80560448 bdeb0500 8056bfe8 [ 55.222991] 9ec0: 00000002 b76da000 00000000 bdeb0500 bdd92448 bca38000 bdeb0510 8056d69c [ 55.231177] 9ee0: bca38000 00000000 80c050fc 00000000 bca39f44 09d42015 00000000 00000001 [ 55.239363] 9f00: bdd92448 bdd92438 bdd92000 7f1158c4 bdd92448 bca2ee00 bf6cbd80 bf6cef00 [ 55.247549] 9f20: 00000000 00000000 00000000 801412d8 bf6cbd98 80c03d00 bca2ee00 bf6cbd80 [ 55.255735] 9f40: bca2ee14 bf6cbd98 80c03d00 00000008 bca38000 80141568 00000000 80c446ae [ 55.263921] 9f60: 00000000 bc9ed880 bc9f0700 bca38000 bc117eb4 80141524 bca2ee00 bc9ed8a4 [ 55.272107] 9f80: 00000000 80147cc8 00000000 bc9f0700 80147b84 00000000 00000000 00000000 [ 55.280292] 9fa0: 00000000 00000000 00000000 80100148 00000000 00000000 00000000 00000000 [ 55.288477] 9fc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000 [ 55.296662] 9fe0: 00000000 00000000 00000000 00000000 00000013 00000000 00000000 00000000 [ 55.304860] [<8047c06c>] (kobject_get) from [<80560448>] (usb_get_dev+0x14/0x1c) [ 55.312271] [<80560448>] (usb_get_dev) from [<8056bfe8>] (usb_hcd_unlink_urb+0x50/0xd8) [ 55.320286] [<8056bfe8>] (usb_hcd_unlink_urb) from [<8056d69c>] (usb_kill_urb.part.0+0x44/0xd0) [ 55.329004] [<8056d69c>] (usb_kill_urb.part.0) from [<7f1158c4>] (acm_softint+0x4c/0x10c [cdc_acm]) [ 55.338082] [<7f1158c4>] (acm_softint [cdc_acm]) from [<801412d8>] (process_one_work+0x19c/0x3e8) [ 55.346969] [<801412d8>] (process_one_work) from [<80141568>] (worker_thread+0x44/0x4dc) [ 55.355072] [<80141568>] (worker_thread) from [<80147cc8>] (kthread+0x144/0x180) [ 55.362481] [<80147cc8>] (kthread) from [<80100148>] (ret_from_fork+0x14/0x2c) [ 55.369706] Exception stack(0xbca39fb0 to 0xbca39ff8) Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com> Signed-off-by: Oliver Neukum <oneukum@suse.com> Cc: stable <stable@vger.kernel.org> Link: https://lore.kernel.org/r/20210311130126.15972-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
I got several memory leak reports from Asan with a simple command. It
was because VDSO is not released due to the refcount. Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.
$ perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
=================================================================
==692599==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
#2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
#3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
#4 0x559bce50826c in map__new util/map.c:175
#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
torvalds#6 0x559bce512f6b in machines__deliver_event util/session.c:1481
torvalds#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
torvalds#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
torvalds#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
torvalds#10 0x559bce519bea in __perf_session__process_events util/session.c:2268
torvalds#11 0x559bce519bea in perf_session__process_events util/session.c:2297
torvalds#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
torvalds#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
torvalds#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
torvalds#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
torvalds#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
torvalds#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
torvalds#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
torvalds#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
torvalds#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
#2 0x559bce50821b in map__new util/map.c:168
#3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#4 0x559bce512f6b in machines__deliver_event util/session.c:1481
#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
torvalds#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
torvalds#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
torvalds#8 0x559bce519bea in __perf_session__process_events util/session.c:2268
torvalds#9 0x559bce519bea in perf_session__process_events util/session.c:2297
torvalds#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
torvalds#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
torvalds#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
torvalds#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
torvalds#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
torvalds#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
torvalds#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
torvalds#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
torvalds#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
ACPICA commit 29da9a2a3f5b2c60420893e5c6309a0586d7a329
ACPI is allocating an object using kmalloc(), but then frees it
using kmem_cache_free(<"Acpi-Namespace" kmem_cache>).
This is wrong and can lead to boot failures manifesting like this:
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
clocksource: Switched to clocksource tsc-early
BUG: unable to handle page fault for address: 000000003ffe0018
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.6.0+ torvalds#211
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
Ubuntu-1.8.2-1ubuntu1 04/01/2014
RIP: 0010:kmem_cache_alloc+0x70/0x1d0
Code: 00 00 4c 8b 45 00 65 49 8b 50 08 65 4c 03 05 6f cc e7 7e 4d 8b
20 4d 85 e4 0f 84 3d 01 00 00 8b 45 20 48 8b 7d 00 48 8d 4a 01 <49> 8b
1c 04 4c 89 e0 65 48 0f c7 0f 0f 94 c0 84 c0 74 c5 8b 45 20
RSP: 0000:ffffc90000013df8 EFLAGS: 00010206
RAX: 0000000000000018 RBX: ffffffff81c49200 RCX: 0000000000000002
RDX: 0000000000000001 RSI: 0000000000000dc0 RDI: 000000000002b300
RBP: ffff88803e403d00 R08: ffff88803ec2b300 R09: 0000000000000001
R10: 0000000000000dc0 R11: 0000000000000006 R12: 000000003ffe0000
R13: ffffffff8110a583 R14: 0000000000000dc0 R15: ffffffff81c49a80
FS: 0000000000000000(0000) GS:ffff88803ec00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000003ffe0018 CR3: 0000000001c0a001 CR4: 00000000003606f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
__trace_define_field+0x33/0xa0
event_trace_init+0xeb/0x2b4
tracer_init_tracefs+0x60/0x195
? register_tracer+0x1e7/0x1e7
do_one_initcall+0x74/0x160
kernel_init_freeable+0x190/0x1f0
? rest_init+0x9a/0x9a
kernel_init+0x5/0xf6
ret_from_fork+0x35/0x40
CR2: 000000003ffe0018
---[ end trace 707efa023f2ee960 ]---
RIP: 0010:kmem_cache_alloc+0x70/0x1d0
Bisection leads to unrelated changes in slab; Vlastimil Babka
suggests an unrelated layout or slab merge change merely exposed
the underlying bug.
Link: https://lore.kernel.org/lkml/4dc93ff8-f86e-f4c9-ebeb-6d3153a78d03@oracle.com/
Link: https://lore.kernel.org/r/a1461e21-c744-767d-6dfc-6641fd3e3ce2@siemens.com
Link: acpica/acpica@29da9a2a
Fixes: f79c8e4 ("ACPICA: Namespace: simplify creation of the initial/default namespace")
Reported-by: Jan Kiszka <jan.kiszka@siemens.com>
Diagnosed-by: Vlastimil Babka <vbabka@suse.cz>
Diagnosed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Vegard Nossum <vegard.nossum@oracle.com>
Signed-off-by: Bob Moore <robert.moore@intel.com>
Signed-off-by: Erik Kaneda <erik.kaneda@intel.com>
Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
… enabled The debugging code for kmap_local() doubles the number of per-CPU fixmap slots allocated for kmap_local(), in order to use half of them as guard regions. This causes the fixmap region to grow downwards beyond the start of its reserved window if the supported number of CPUs is large, and collide with the newly added virtual DT mapping right below it, which is obviously not good. One manifestation of this is EFI boot on a kernel built with NR_CPUS=32 and CONFIG_DEBUG_KMAP_LOCAL=y, which may pass the FDT in highmem, resulting in block entries below the fixmap region that the fixmap code misidentifies as fixmap table entries, and subsequently tries to dereference using a phys-to-virt translation that is only valid for lowmem. This results in a cryptic splat such as the one below. ftrace: allocating 45548 entries in 89 pages 8<--- cut here --- Unable to handle kernel paging request at virtual address fc6006f0 pgd = (ptrval) [fc6006f0] *pgd=80000040207003, *pmd=00000000 Internal error: Oops: a06 [#1] SMP ARM Modules linked in: CPU: 0 PID: 0 Comm: swapper Not tainted 5.11.0+ torvalds#382 Hardware name: Generic DT based system PC is at cpu_ca15_set_pte_ext+0x24/0x30 LR is at __set_fixmap+0xe4/0x118 pc : [<c041ac9c>] lr : [<c04189d8>] psr: 400000d3 sp : c1601ed8 ip : 00400000 fp : 00800000 r10: 0000071f r9 : 00421000 r8 : 00c00000 r7 : 00c00000 r6 : 0000071f r5 : ffade000 r4 : 4040171f r3 : 00c00000 r2 : 4040171f r1 : c041ac78 r0 : fc6006f0 Flags: nZcv IRQs off FIQs off Mode SVC_32 ISA ARM Segment none Control: 30c5387d Table: 40203000 DAC: 00000001 Process swapper (pid: 0, stack limit = 0x(ptrval)) So let's limit CONFIG_NR_CPUS to 16 when CONFIG_DEBUG_KMAP_LOCAL=y. Also, fix the BUILD_BUG_ON() check that was supposed to catch this, by checking whether the region grows below the start address rather than above the end address. Fixes: 2a15ba8 ("ARM: highmem: Switch to generic kmap atomic") Reported-by: Peter Robinson <pbrobinson@gmail.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Ard Biesheuvel <ardb@kernel.org> Acked-by: Thomas Gleixner <tglx@linutronix.de> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
Commit ca0246b ("z3fold: fix possible reclaim races") introduced the PAGE_CLAIMED flag "to avoid racing on a z3fold 'headless' page release." By atomically testing and setting the bit in each of z3fold_free() and z3fold_reclaim_page(), a double-free was avoided. However, commit dcf5aed ("z3fold: stricter locking and more careful reclaim") appears to have unintentionally broken this behavior by moving the PAGE_CLAIMED check in z3fold_reclaim_page() to after the page lock gets taken, which only happens for non-headless pages. For headless pages, the check is now skipped entirely and races can occur again. I have observed such a race on my system: page:00000000ffbd76b7 refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x165316 flags: 0x2ffff0000000000() raw: 02ffff0000000000 ffffea0004535f48 ffff8881d553a170 0000000000000000 raw: 0000000000000000 0000000000000011 00000000ffffffff 0000000000000000 page dumped because: VM_BUG_ON_PAGE(page_ref_count(page) == 0) ------------[ cut here ]------------ kernel BUG at include/linux/mm.h:707! invalid opcode: 0000 [#1] PREEMPT SMP KASAN PTI CPU: 2 PID: 291928 Comm: kworker/2:0 Tainted: G B 5.10.7-arch1-1-kasan #1 Hardware name: Gigabyte Technology Co., Ltd. H97N-WIFI/H97N-WIFI, BIOS F9b 03/03/2016 Workqueue: zswap-shrink shrink_worker RIP: 0010:__free_pages+0x10a/0x130 Code: c1 e7 06 48 01 ef 45 85 e4 74 d1 44 89 e6 31 d2 41 83 ec 01 e8 e7 b0 ff ff eb da 48 c7 c6 e0 32 91 88 48 89 ef e8 a6 89 f8 ff <0f> 0b 4c 89 e7 e8 fc 79 07 00 e9 33 ff ff ff 48 89 ef e8 ff 79 07 RSP: 0000:ffff88819a2ffb98 EFLAGS: 00010296 RAX: 0000000000000000 RBX: ffffea000594c5a8 RCX: 0000000000000000 RDX: 1ffffd4000b298b7 RSI: 0000000000000000 RDI: ffffea000594c5b8 RBP: ffffea000594c580 R08: 000000000000003e R09: ffff8881d5520bbb R10: ffffed103aaa4177 R11: 0000000000000001 R12: ffffea000594c5b4 R13: 0000000000000000 R14: ffff888165316000 R15: ffffea000594c588 FS: 0000000000000000(0000) GS:ffff8881d5500000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00007f7c8c3654d8 CR3: 0000000103f42004 CR4: 00000000001706e0 Call Trace: z3fold_zpool_shrink+0x9b6/0x1240 shrink_worker+0x35/0x90 process_one_work+0x70c/0x1210 worker_thread+0x539/0x1200 kthread+0x330/0x400 ret_from_fork+0x22/0x30 Modules linked in: rfcomm ebtable_filter ebtables ip6table_filter ip6_tables iptable_filter ccm algif_aead des_generic libdes ecb algif_skcipher cmac bnep md4 algif_hash af_alg vfat fat intel_rapl_msr intel_rapl_common x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel iwlmvm hid_logitech_hidpp kvm at24 mac80211 snd_hda_codec_realtek iTCO_wdt snd_hda_codec_generic intel_pmc_bxt snd_hda_codec_hdmi ledtrig_audio iTCO_vendor_support mei_wdt mei_hdcp snd_hda_intel snd_intel_dspcfg libarc4 soundwire_intel irqbypass iwlwifi soundwire_generic_allocation rapl soundwire_cadence intel_cstate snd_hda_codec intel_uncore btusb joydev mousedev snd_usb_audio pcspkr btrtl uvcvideo nouveau btbcm i2c_i801 btintel snd_hda_core videobuf2_vmalloc i2c_smbus snd_usbmidi_lib videobuf2_memops bluetooth snd_hwdep soundwire_bus snd_soc_rt5640 videobuf2_v4l2 cfg80211 snd_soc_rl6231 videobuf2_common snd_rawmidi lpc_ich alx videodev mdio snd_seq_device snd_soc_core mc ecdh_generic mxm_wmi mei_me hid_logitech_dj wmi snd_compress e1000e ac97_bus mei ttm rfkill snd_pcm_dmaengine ecc snd_pcm snd_timer snd soundcore mac_hid acpi_pad pkcs8_key_parser it87 hwmon_vid crypto_user fuse ip_tables x_tables ext4 crc32c_generic crc16 mbcache jbd2 dm_crypt cbc encrypted_keys trusted tpm rng_core usbhid dm_mod crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel crypto_simd cryptd glue_helper xhci_pci xhci_pci_renesas i915 video intel_gtt i2c_algo_bit drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops cec drm agpgart ---[ end trace 126d646fc3dc0ad8 ]--- To fix the issue, re-add the earlier test and set in the case where we have a headless page. Link: https://lkml.kernel.org/r/c8106dbe6d8390b290cd1d7f873a2942e805349e.1615452048.git.tommyhebb@gmail.com Fixes: dcf5aed ("z3fold: stricter locking and more careful reclaim") Signed-off-by: Thomas Hebb <tommyhebb@gmail.com> Reviewed-by: Vitaly Wool <vitaly.wool@konsulko.com> Cc: Jongseok Kim <ks77sj@gmail.com> Cc: Snild Dolkow <snild@sony.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
…_PROTECT H_PROTECT expects the flag value to include flags: AVPN, pp0, pp1, pp2, key0-key4, Noexec, CMO Option flags This patch updates hpte_updatepp() to fetch the storage key value from the linux page table and use the same in H_PROTECT hcall. native_hpte_updatepp() is not updated because the kernel doesn't clear the existing storage key value there. The kernel also doesn't use hpte_updatepp() callback for updating storage keys. This fixes the below kernel crash observed with KUAP enabled. BUG: Unable to handle kernel data access on write at 0xc009fffffc440000 Faulting instruction address: 0xc0000000000b7030 Key fault AMR: 0xfcffffffffffffff IAMR: 0xc0000077bc498100 Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194 Oops: Kernel access of bad area, sig: 11 [#1] LE PAGE_SIZE=64K MMU=Hash SMP NR_CPUS=2048 NUMA pSeries ... CFAR: c000000000010100 DAR: c009fffffc440000 DSISR: 02200000 IRQMASK: 0 ... NIP memset+0x68/0x104 LR pcpu_alloc+0x54c/0xb50 Call Trace: pcpu_alloc+0x55c/0xb50 (unreliable) blk_stat_alloc_callback+0x94/0x150 blk_mq_init_allocated_queue+0x64/0x560 blk_mq_init_queue+0x54/0xb0 scsi_mq_alloc_queue+0x30/0xa0 scsi_alloc_sdev+0x1cc/0x300 scsi_probe_and_add_lun+0xb50/0x1020 __scsi_scan_target+0x17c/0x790 scsi_scan_channel+0x90/0xe0 scsi_scan_host_selected+0x148/0x1f0 do_scan_async+0x2c/0x2a0 async_run_entry_fn+0x78/0x220 process_one_work+0x264/0x540 worker_thread+0xa8/0x600 kthread+0x190/0x1a0 ret_from_kernel_thread+0x5c/0x6c With KUAP enabled the kernel uses storage key 3 for all its translations. But as shown by the debug print, in this specific case we have the hash page table entry created with key value 0. Found HPTE: v = 0x40070adbb6fffc05 r = 0x1ffffffffff1194 and DSISR indicates a key fault. This can happen due to parallel fault on the same EA by different CPUs: CPU 0 CPU 1 fault on X H_PAGE_BUSY set fault on X finish fault handling and clear H_PAGE_BUSY check for H_PAGE_BUSY continue with fault handling. This implies CPU1 will end up calling hpte_updatepp for address X and the kernel updated the hash pte entry with key 0 Fixes: d94b827 ("powerpc/book3s64/kuap: Use Key 3 for kernel mapping with hash translation") Reported-by: Murilo Opsfelder Araujo <muriloo@linux.ibm.com> Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.ibm.com> Debugged-by: Michael Ellerman <mpe@ellerman.id.au> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20210326070755.304625-1-aneesh.kumar@linux.ibm.com
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
Patch fixes the bug: BUG: kernel NULL pointer dereference, address: 0000000000000050 PGD 0 P4D 0 Oops: 0002 [#1] SMP PTI CPU: 0 PID: 4137 Comm: uvc-gadget Tainted: G OE 5.10.0-next-20201214+ #3 Hardware name: ASUS All Series/Q87T, BIOS 0908 07/22/2014 RIP: 0010:cdnsp_remove_request+0xe9/0x530 [cdnsp_udc_pci] Code: 01 00 00 31 f6 48 89 df e8 64 d4 ff ff 48 8b 43 08 48 8b 13 45 31 f6 48 89 42 08 48 89 10 b8 98 ff ff ff 48 89 1b 48 89 5b 08 <41> 83 6d 50 01 41 83 af d0 00 00 00 01 41 f6 84 24 78 20 00 00 08 RSP: 0018:ffffb68d00d07b60 EFLAGS: 00010046 RAX: 00000000ffffff98 RBX: ffff9d29c57fbf00 RCX: 0000000000001400 RDX: ffff9d29c57fbf00 RSI: 0000000000000000 RDI: ffff9d29c57fbf00 RBP: ffffb68d00d07bb0 R08: ffff9d2ad9510a00 R09: ffff9d2ac011c000 R10: ffff9d2a12b6e760 R11: 0000000000000000 R12: ffff9d29d3fb8000 R13: 0000000000000000 R14: 0000000000000000 R15: ffff9d29d3fb88c0 FS: 0000000000000000(0000) GS:ffff9d2adba00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000050 CR3: 0000000102164005 CR4: 00000000001706f0 Call Trace: cdnsp_ep_dequeue+0x3c/0x90 [cdnsp_udc_pci] cdnsp_gadget_ep_dequeue+0x3f/0x80 [cdnsp_udc_pci] usb_ep_dequeue+0x21/0x70 [udc_core] uvcg_video_enable+0x19d/0x220 [usb_f_uvc] uvc_v4l2_release+0x49/0x90 [usb_f_uvc] v4l2_release+0xa5/0x100 [videodev] __fput+0x99/0x250 ____fput+0xe/0x10 task_work_run+0x75/0xb0 do_exit+0x370/0xb80 do_group_exit+0x43/0xa0 get_signal+0x12d/0x820 arch_do_signal_or_restart+0xb2/0x870 ? __switch_to_asm+0x36/0x70 ? kern_select+0xc6/0x100 exit_to_user_mode_prepare+0xfc/0x170 syscall_exit_to_user_mode+0x2a/0x40 do_syscall_64+0x43/0x80 entry_SYSCALL_64_after_hwframe+0x44/0xa9 RIP: 0033:0x7fe969cf5dd7 Code: Unable to access opcode bytes at RIP 0x7fe969cf5dad. Problem occurs for UVC class. During disconnecting the UVC class disable endpoints and then start dequeuing all requests. This leads to situation where requests are removed twice. The first one in cdnsp_gadget_ep_disable and the second in cdnsp_gadget_ep_dequeue function. Patch adds condition in cdnsp_gadget_ep_dequeue function which allows dequeue requests only from enabled endpoint. Fixes: 3d82904 ("usb: cdnsp: cdns3 Add main part of Cadence USBSSP DRD Driver") Signed-off-by: Pawel Laszczak <pawell@cadence.com> Signed-off-by: Peter Chen <peter.chen@kernel.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
general protection fault, probably for non-canonical address 0xdffffc0000000018: 0000 [#1] KASAN: null-ptr-deref in range [0x00000000000000c0-0x00000000000000c7] RIP: 0010:io_commit_cqring+0x37f/0xc10 fs/io_uring.c:1318 Call Trace: io_kill_timeouts+0x2b5/0x320 fs/io_uring.c:8606 io_ring_ctx_wait_and_kill+0x1da/0x400 fs/io_uring.c:8629 io_uring_create fs/io_uring.c:9572 [inline] io_uring_setup+0x10da/0x2ae0 fs/io_uring.c:9599 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae It can get into wait_and_kill() before setting up ctx->rings, and hence io_commit_cqring() fails. Mimic poll cancel and do it only when we completed events, there can't be any requests if it failed before initialising rings. Fixes: 80c4cbd ("io_uring: do post-completion chore on t-out cancel") Reported-by: syzbot+0e905eb8228070c457a0@syzkaller.appspotmail.com Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/660261a48f0e7abf260c8e43c87edab3c16736fa.1617014345.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
The following problem has been reported by George Kennedy: Since commit 7fef431 ("mm/page_alloc: place pages to tail in __free_pages_core()") the following use after free occurs intermittently when ACPI tables are accessed. BUG: KASAN: use-after-free in ibft_init+0x134/0xc49 Read of size 4 at addr ffff8880be453004 by task swapper/0/1 CPU: 3 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1-7a7fd0d #1 Call Trace: dump_stack+0xf6/0x158 print_address_description.constprop.9+0x41/0x60 kasan_report.cold.14+0x7b/0xd4 __asan_report_load_n_noabort+0xf/0x20 ibft_init+0x134/0xc49 do_one_initcall+0xc4/0x3e0 kernel_init_freeable+0x5af/0x66b kernel_init+0x16/0x1d0 ret_from_fork+0x22/0x30 ACPI tables mapped via kmap() do not have their mapped pages reserved and the pages can be "stolen" by the buddy allocator. Apparently, on the affected system, the ACPI table in question is not located in "reserved" memory, like ACPI NVS or ACPI Data, that will not be used by the buddy allocator, so the memory occupied by that table has to be explicitly reserved to prevent the buddy allocator from using it. In order to address this problem, rearrange the initialization of the ACPI tables on x86 to locate the initial tables earlier and reserve the memory occupied by them. The other architectures using ACPI should not be affected by this change. Link: https://lore.kernel.org/linux-acpi/1614802160-29362-1-git-send-email-george.kennedy@oracle.com/ Reported-by: George Kennedy <george.kennedy@oracle.com> Tested-by: George Kennedy <george.kennedy@oracle.com> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by: Mike Rapoport <rppt@linux.ibm.com> Cc: 5.10+ <stable@vger.kernel.org> # 5.10+
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
Ido Schimmel says: ==================== mlxsw: spectrum: Fix ECN marking in tunnel decapsulation Patch #1 fixes a discrepancy between the software and hardware data paths with regards to ECN marking after decapsulation. See the changelog for a detailed description. Patch #2 extends the ECN decap test to cover all possible combinations of inner and outer ECN markings. The test passes over both data paths. v2: * Only set ECT(1) if inner is ECT(0) * Introduce a new helper to determine inner ECN. Share it between NVE and IP-in-IP tunnels * Extend the selftest ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
card->owner is a required property and since commit 81033c6 ("ALSA: core: Warn on empty module") a warning is issued if it is empty. Add it. This fixes following warning observed on Lamobo R1: WARNING: CPU: 1 PID: 190 at sound/core/init.c:207 snd_card_new+0x430/0x480 [snd] Modules linked in: sun4i_codec(E+) sun4i_backend(E+) snd_soc_core(E) ... CPU: 1 PID: 190 Comm: systemd-udevd Tainted: G C E 5.10.0-1-armmp #1 Debian 5.10.4-1 Hardware name: Allwinner sun7i (A20) Family Call trace: (snd_card_new [snd]) (snd_soc_bind_card [snd_soc_core]) (snd_soc_register_card [snd_soc_core]) (sun4i_codec_probe [sun4i_codec]) Fixes: 45fb6b6 ("ASoC: sunxi: add support for the on-chip codec on early Allwinner SoCs") Related: commit 3c27ea2 ("ASoC: qcom: Set card->owner to avoid warnings") Related: commit ec653df ("drm/vc4/vc4_hdmi: fill ASoC card owner") Cc: linux-arm-kernel@lists.infradead.org Cc: alsa-devel@alsa-project.org Signed-off-by: Bastian Germann <bage@linutronix.de> Link: https://lore.kernel.org/r/20210331151843.30583-1-bage@linutronix.de Signed-off-by: Mark Brown <broonie@kernel.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
…ut CONFIG_PPC_FPU_REGS An #ifdef CONFIG_PPC_FPU_REGS is missing in arch_ptrace() leading to the following Oops because [REGSET_FPR] entry is not initialised in native_regsets[]. [ 41.917608] BUG: Unable to handle kernel instruction fetch [ 41.922849] Faulting instruction address: 0xff8fd228 [ 41.927760] Oops: Kernel access of bad area, sig: 11 [#1] [ 41.933089] BE PAGE_SIZE=4K PREEMPT CMPC885 [ 41.940753] Modules linked in: [ 41.943768] CPU: 0 PID: 366 Comm: gdb Not tainted 5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty #4835 [ 41.952800] NIP: ff8fd228 LR: c004d9e0 CTR: ff8fd228 [ 41.957790] REGS: caae9df0 TRAP: 0400 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty) [ 41.966741] MSR: 40009032 <EE,ME,IR,DR,RI> CR: 82004248 XER: 20000000 [ 41.973540] [ 41.973540] GPR00: c004d9b4 caae9eb0 c1b64f60 c1b64520 c0713cd4 caae9eb8 c1bacdfc 00000004 [ 41.973540] GPR08: 00000200 ff8fd228 c1bac700 00001032 28004242 1061aaf4 00000001 106d64a0 [ 41.973540] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538 [ 41.973540] GPR24: 7fa0a580 7fa0a570 c1bacc00 c1b64520 c1bacc00 caae9ee8 00000108 c0713cd4 [ 42.009685] NIP [ff8fd228] 0xff8fd228 [ 42.013300] LR [c004d9e0] __regset_get+0x100/0x124 [ 42.018036] Call Trace: [ 42.020443] [caae9eb0] [c004d9b4] __regset_get+0xd4/0x124 (unreliable) [ 42.026899] [caae9ee0] [c004da94] copy_regset_to_user+0x5c/0xb0 [ 42.032751] [caae9f10] [c002f640] sys_ptrace+0xe4/0x588 [ 42.037915] [caae9f30] [c0011010] ret_from_syscall+0x0/0x28 [ 42.043422] --- interrupt: c00 at 0xfd1f8e4 [ 42.047553] NIP: 0fd1f8e4 LR: 1004a688 CTR: 00000000 [ 42.052544] REGS: caae9f40 TRAP: 0c00 Not tainted (5.12.0-rc5-s3k-dev-01666-g7aac86a0f057-dirty) [ 42.061494] MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 48004442 XER: 00000000 [ 42.068551] [ 42.068551] GPR00: 0000001a 7fa0a040 77dad7e0 0000000e 00000170 00000000 7fa0a078 00000004 [ 42.068551] GPR08: 00000000 108deb88 108dda40 106d6010 44004442 1061aaf4 00000001 106d64a0 [ 42.068551] GPR16: 00000000 00000000 7fa0a774 10610000 7fa0aef9 00000000 10610000 7fa0a538 [ 42.068551] GPR24: 7fa0a580 7fa0a570 1078fe00 1078fd70 1078fd70 00000170 0fdd3244 0000000d [ 42.104696] NIP [0fd1f8e4] 0xfd1f8e4 [ 42.108225] LR [1004a688] 0x1004a688 [ 42.111753] --- interrupt: c00 [ 42.114768] Instruction dump: [ 42.117698] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX [ 42.125443] XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX [ 42.133195] ---[ end trace d35616f22ab2100c ]--- Adding the missing #ifdef is not good because gdb doesn't like getting an error when getting registers. Instead, make ptrace return 0s when CONFIG_PPC_FPU_REGS is not set. Fixes: b6254ce ("powerpc/signal: Don't manage floating point regs when no FPU") Cc: stable@vger.kernel.org Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/9121a44a2d50ba1af18d8aa5ada06c9a3bea8afd.1617200085.git.christophe.leroy@csgroup.eu
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
PPC32 encounters a KUAP fault when trying to handle a signal with VDSO unmapped. Kernel attempted to read user page (7fc07ec0) - exploit attempt? (uid: 0) BUG: Unable to handle kernel data access on read at 0x7fc07ec0 Faulting instruction address: 0xc00111d4 Oops: Kernel access of bad area, sig: 11 [#1] BE PAGE_SIZE=16K PREEMPT CMPC885 CPU: 0 PID: 353 Comm: sigreturn_vdso Not tainted 5.12.0-rc4-s3k-dev-01553-gb30c310ea220 #4814 NIP: c00111d4 LR: c0005a28 CTR: 00000000 REGS: cadb3dd0 TRAP: 0300 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220) MSR: 00009032 <EE,ME,IR,DR,RI> CR: 48000884 XER: 20000000 DAR: 7fc07ec0 DSISR: 88000000 GPR00: c0007788 cadb3e90 c28d4a40 7fc07ec0 7fc07ed0 000004e0 7fc07ce0 00000000 GPR08: 00000001 00000001 7fc07ec0 00000000 28000282 1001b828 100a0920 00000000 GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e GPR24: ffffffff 105c43c8 00000000 7fc07ec8 cadb3f40 cadb3ec8 c28d4a40 00000000 NIP [c00111d4] flush_icache_range+0x90/0xb4 LR [c0005a28] handle_signal32+0x1bc/0x1c4 Call Trace: [cadb3e90] [100d0000] 0x100d0000 (unreliable) [cadb3ec0] [c0007788] do_notify_resume+0x260/0x314 [cadb3f20] [c000c764] syscall_exit_prepare+0x120/0x184 [cadb3f30] [c00100b4] ret_from_syscall+0xc/0x28 --- interrupt: c00 at 0xfe807f8 NIP: 0fe807f8 LR: 10001060 CTR: c0139378 REGS: cadb3f40 TRAP: 0c00 Not tainted (5.12.0-rc4-s3k-dev-01553-gb30c310ea220) MSR: 0000d032 <EE,PR,ME,IR,DR,RI> CR: 28000482 XER: 20000000 GPR00: 00000025 7fc081c0 77bb1690 00000000 0000000a 28000482 00000001 0ff03a38 GPR08: 0000d032 00006de5 c28d4a40 00000009 88000482 1001b828 100a0920 00000000 GPR16: 100cac0c 100b0000 105c43a4 105c5685 100d0000 100d0000 100d0000 100b2e9e GPR24: ffffffff 105c43c8 00000000 77ba7628 10002398 10010000 10002124 00024000 NIP [0fe807f8] 0xfe807f8 LR [10001060] 0x10001060 --- interrupt: c00 Instruction dump: 38630010 7c001fac 38630010 4200fff0 7c0004ac 4c00012c 4e800020 7c001fac 2c0a0000 38630010 4082ffcc 4bffffe4 <7c00186c> 2c070000 39430010 4082ff8c ---[ end trace 3973fb72b049cb06 ]--- This is because flush_icache_range() is called on user addresses. The same problem was detected some time ago on PPC64. It was fixed by enabling KUAP in commit 59bee45 ("powerpc/mm: Fix missing KUAP disable in flush_coherent_icache()"). PPC32 doesn't use flush_coherent_icache() and fallbacks on clean_dcache_range() and invalidate_icache_range(). We could fix it similarly by enabling user access in those functions, but this is overkill for just flushing two instructions. The two instructions are 8 bytes aligned, so a single dcbst/icbi is enough to flush them. Do like __patch_instruction() and inline a dcbst followed by an icbi just after the write of the instructions, while user access is still allowed. The isync is not required because rfi will be used to return to user. icbi() is handled as a read so read-write user access is needed. Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/bde9154e5351a5ac7bca3d59cdb5a5e8edacbb79.1617199569.git.christophe.leroy@csgroup.eu
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
Fix invalid usage of a list_for_each_entry cursor in clk_notifier_register(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b247649 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-1-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
Fix invalid usage of a list_for_each_entry cursor in clk_notifier_unregister(). When list is empty or if the list is completely traversed (without breaking from the loop on one of the entries) then the list cursor does not point to a valid entry and therefore should not be used. The patch fixes a logical bug that hasn't been seen in pratice however it is analogus to the bug fixed in clk_notifier_register(). The issue was dicovered when running 5.12-rc1 kernel on x86_64 with KASAN enabled: BUG: KASAN: global-out-of-bounds in clk_notifier_register+0xab/0x230 Read of size 8 at addr ffffffffa0d10588 by task swapper/0/1 CPU: 1 PID: 1 Comm: swapper/0 Not tainted 5.12.0-rc1 #1 Hardware name: Google Caroline/Caroline, BIOS Google_Caroline.7820.430.0 07/20/2018 Call Trace: dump_stack+0xee/0x15c print_address_description+0x1e/0x2dc kasan_report+0x188/0x1ce ? clk_notifier_register+0xab/0x230 ? clk_prepare_lock+0x15/0x7b ? clk_notifier_register+0xab/0x230 clk_notifier_register+0xab/0x230 dw8250_probe+0xc01/0x10d4 ... Memory state around the buggy address: ffffffffa0d10480: 00 00 00 00 00 03 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10500: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 f9 f9 >ffffffffa0d10580: f9 f9 f9 f9 00 00 00 00 00 00 00 00 00 00 00 00 ^ ffffffffa0d10600: 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 00 00 00 00 ffffffffa0d10680: 00 00 00 00 00 00 00 00 f9 f9 f9 f9 00 00 00 00 ================================================================== Fixes: b247649 ("clk: introduce the common clock framework") Reported-by: Lukasz Majczak <lma@semihalf.com> Signed-off-by: Lukasz Bartosik <lb@semihalf.com> Link: https://lore.kernel.org/r/20210401225149.18826-2-lb@semihalf.com Signed-off-by: Stephen Boyd <sboyd@kernel.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
A panic can result when AIP is enabled: BUG: unable to handle kernel NULL pointer dereference at 000000000000000 PGD 0 P4D 0 Oops: 0000 1 SMP PTI CPU: 70 PID: 981 Comm: systemd-udevd Tainted: G OE --------- - - 4.18.0-240.el8.x86_64 #1 Hardware name: Intel Corporation S2600KP/S2600KP, BIOS SE5C610.86B.01.01.0005.101720141054 10/17/2014 RIP: 0010:__bitmap_and+0x1b/0x70 RSP: 0018:ffff99aa0845f9f0 EFLAGS: 00010246 RAX: 0000000000000000 RBX: ffff8d5a6fc18000 RCX: 0000000000000048 RDX: 0000000000000000 RSI: ffffffffc06336f0 RDI: ffff8d5a8fa67750 RBP: 0000000000000079 R08: 0000000fffffffff R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000001 R12: ffffffffc06336f0 R13: 00000000000000a0 R14: ffff8d5a6fc18000 R15: 0000000000000003 FS: 00007fec137a5980(0000) GS:ffff8d5a9fa80000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 0000000000000000 CR3: 0000000a04b48002 CR4: 00000000001606e0 Call Trace: hfi1_num_netdev_contexts+0x7c/0x110 [hfi1] hfi1_init_dd+0xd7f/0x1a90 [hfi1] ? pci_bus_read_config_dword+0x49/0x70 ? pci_mmcfg_read+0x3e/0xe0 do_init_one.isra.18+0x336/0x640 [hfi1] local_pci_probe+0x41/0x90 pci_device_probe+0x105/0x1c0 really_probe+0x212/0x440 driver_probe_device+0x49/0xc0 device_driver_attach+0x50/0x60 __driver_attach+0x61/0x130 ? device_driver_attach+0x60/0x60 bus_for_each_dev+0x77/0xc0 ? klist_add_tail+0x3b/0x70 bus_add_driver+0x14d/0x1e0 ? dev_init+0x10b/0x10b [hfi1] driver_register+0x6b/0xb0 ? dev_init+0x10b/0x10b [hfi1] hfi1_mod_init+0x1e6/0x20a [hfi1] do_one_initcall+0x46/0x1c3 ? free_unref_page_commit+0x91/0x100 ? _cond_resched+0x15/0x30 ? kmem_cache_alloc_trace+0x140/0x1c0 do_init_module+0x5a/0x220 load_module+0x14b4/0x17e0 ? __do_sys_finit_module+0xa8/0x110 __do_sys_finit_module+0xa8/0x110 do_syscall_64+0x5b/0x1a0 The issue happens when pcibus_to_node() returns NO_NUMA_NODE. Fix this issue by moving the initialization of dd->node to hfi1_devdata allocation and remove the other pcibus_to_node() calls in the probe path and use dd->node instead. Affinity logic is adjusted to use a new field dd->affinity_entry as a guard instead of dd->node. Fixes: 4730f4a ("IB/hfi1: Activate the dummy netdev") Link: https://lore.kernel.org/r/1617025700-31865-4-git-send-email-dennis.dalessandro@cornelisnetworks.com Cc: stable@vger.kernel.org Signed-off-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com> Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
Some drivers clear the 'ethtool_link_ksettings' struct in their get_link_ksettings() callback, before populating it with actual values. Such drivers will set the new 'link_mode' field to zero, resulting in user space receiving wrong link mode information given that zero is a valid value for the field. Another problem is that some drivers (notably tun) can report random values in the 'link_mode' field. This can result in a general protection fault when the field is used as an index to the 'link_mode_params' array [1]. This happens because such drivers implement their set_link_ksettings() callback by simply overwriting their private copy of 'ethtool_link_ksettings' struct with the one they get from the stack, which is not always properly initialized. Fix these problems by removing 'link_mode' from 'ethtool_link_ksettings' and instead have drivers call ethtool_params_from_link_mode() with the current link mode. The function will derive the link parameters (e.g., speed) from the link mode and fill them in the 'ethtool_link_ksettings' struct. v3: * Remove link_mode parameter and derive the link parameters in the driver instead of passing link_mode parameter to ethtool and derive it there. v2: * Introduce 'cap_link_mode_supported' instead of adding a validity field to 'ethtool_link_ksettings' struct. [1] general protection fault, probably for non-canonical address 0xdffffc00f14cc32c: 0000 [#1] PREEMPT SMP KASAN KASAN: probably user-memory-access in range [0x000000078a661960-0x000000078a661967] CPU: 0 PID: 8452 Comm: syz-executor360 Not tainted 5.11.0-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:__ethtool_get_link_ksettings+0x1a3/0x3a0 net/ethtool/ioctl.c:446 Code: b7 3e fa 83 fd ff 0f 84 30 01 00 00 e8 16 b0 3e fa 48 8d 3c ed 60 d5 69 8a 48 b8 00 00 00 00 00 fc ff df 48 89 fa 48 c1 ea 03 <0f> b6 14 02 48 89 f8 83 e0 07 83 c0 03 +38 d0 7c 08 84 d2 0f 85 b9 RSP: 0018:ffffc900019df7a0 EFLAGS: 00010202 RAX: dffffc0000000000 RBX: ffff888026136008 RCX: 0000000000000000 RDX: 00000000f14cc32c RSI: ffffffff873439ca RDI: 000000078a661960 RBP: 00000000ffff8880 R08: 00000000ffffffff R09: ffff88802613606f R10: ffffffff873439bc R11: 0000000000000000 R12: 0000000000000000 R13: ffff88802613606c R14: ffff888011d0c210 R15: ffff888011d0c210 FS: 0000000000749300(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000004b60f0 CR3: 00000000185c2000 CR4: 00000000001506f0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: linkinfo_prepare_data+0xfd/0x280 net/ethtool/linkinfo.c:37 ethnl_default_notify+0x1dc/0x630 net/ethtool/netlink.c:586 ethtool_notify+0xbd/0x1f0 net/ethtool/netlink.c:656 ethtool_set_link_ksettings+0x277/0x330 net/ethtool/ioctl.c:620 dev_ethtool+0x2b35/0x45d0 net/ethtool/ioctl.c:2842 dev_ioctl+0x463/0xb70 net/core/dev_ioctl.c:440 sock_do_ioctl+0x148/0x2d0 net/socket.c:1060 sock_ioctl+0x477/0x6a0 net/socket.c:1177 vfs_ioctl fs/ioctl.c:48 [inline] __do_sys_ioctl fs/ioctl.c:753 [inline] __se_sys_ioctl fs/ioctl.c:739 [inline] __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xa9 Fixes: c890704 ("ethtool: Get link mode in use instead of speed and duplex parameters") Signed-off-by: Danielle Ratson <danieller@nvidia.com> Reported-by: Eric Dumazet <eric.dumazet@gmail.com> Reviewed-by: Ido Schimmel <idosch@nvidia.com> Signed-off-by: David S. Miller <davem@davemloft.net>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
Danielle Ratson says: ==================== Fix link_mode derived params functionality Currently, link_mode parameter derives 3 other link parameters, speed, lanes and duplex, and the derived information is sent to user space. Few bugs were found in that functionality. First, some drivers clear the 'ethtool_link_ksettings' struct in their get_link_ksettings() callback and cause receiving wrong link mode information in user space. And also, some drivers can report random values in the 'link_mode' field and cause general protection fault. Second, the link parameters are only derived in netlink path so in ioctl path, we don't any reasonable values. Third, setting 'speed 10000 lanes 1' fails since the lanes parameter wasn't set for ETHTOOL_LINK_MODE_10000baseR_FEC_BIT. Patch #1 solves the first two problems by removing link_mode parameter and deriving the link parameters in driver instead of ethtool. Patch #2 solves the third one, by setting the lanes parameter for the link_mode. v3: * Remove the link_mode parameter in the first patch to solve both two issues from patch#1 and patch#2. * Add the second patch to solve the third issue. v2: * Add patch #2. * Introduce 'cap_link_mode_supported' instead of adding a validity field to 'ethtool_link_ksettings' struct in patch #1. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
As INI QP does not require a recv_cq, avoid the following null pointer dereference by checking if the qp_type is not INI before trying to extract the recv_cq. BUG: kernel NULL pointer dereference, address: 00000000000000e0 #PF: supervisor read access in kernel mode #PF: error_code(0x0000) - not-present page PGD 0 P4D 0 Oops: 0000 [#1] SMP PTI CPU: 0 PID: 54250 Comm: mpitests-IMB-MP Not tainted 5.12.0-rc5 #1 Hardware name: Dell Inc. PowerEdge R320/0KM5PX, BIOS 2.7.0 08/19/2019 RIP: 0010:qedr_create_qp+0x378/0x820 [qedr] Code: 02 00 00 50 e8 29 d4 a9 d1 48 83 c4 18 e9 65 fe ff ff 48 8b 53 10 48 8b 43 18 44 8b 82 e0 00 00 00 45 85 c0 0f 84 10 74 00 00 <8b> b8 e0 00 00 00 85 ff 0f 85 50 fd ff ff e9 fd 73 00 00 48 8d bd RSP: 0018:ffff9c8f056f7a70 EFLAGS: 00010202 RAX: 0000000000000000 RBX: ffff9c8f056f7b58 RCX: 0000000000000009 RDX: ffff8c41a9744c00 RSI: ffff9c8f056f7b58 RDI: ffff8c41c0dfa280 RBP: ffff8c41c0dfa280 R08: 0000000000000002 R09: 0000000000000001 R10: 0000000000000000 R11: ffff8c41e06fc608 R12: ffff8c4194052000 R13: 0000000000000000 R14: ffff8c4191546070 R15: ffff8c41c0dfa280 FS: 00007f78b2787b80(0000) GS:ffff8c43a3200000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000000000e0 CR3: 00000001011d6002 CR4: 00000000001706f0 Call Trace: ib_uverbs_handler_UVERBS_METHOD_QP_CREATE+0x4e4/0xb90 [ib_uverbs] ? ib_uverbs_cq_event_handler+0x30/0x30 [ib_uverbs] ib_uverbs_run_method+0x6f6/0x7a0 [ib_uverbs] ? ib_uverbs_handler_UVERBS_METHOD_QP_DESTROY+0x70/0x70 [ib_uverbs] ? __cond_resched+0x15/0x30 ? __kmalloc+0x5a/0x440 ib_uverbs_cmd_verbs+0x195/0x360 [ib_uverbs] ? xa_load+0x6e/0x90 ? cred_has_capability+0x7c/0x130 ? avc_has_extended_perms+0x17f/0x440 ? vma_link+0xae/0xb0 ? vma_set_page_prot+0x2a/0x60 ? mmap_region+0x298/0x6c0 ? do_mmap+0x373/0x520 ? selinux_file_ioctl+0x17f/0x220 ib_uverbs_ioctl+0xa7/0x110 [ib_uverbs] __x64_sys_ioctl+0x84/0xc0 do_syscall_64+0x33/0x40 entry_SYSCALL_64_after_hwframe+0x44/0xae RIP: 0033:0x7f78b120262b Fixes: 06e8d1d ("RDMA/qedr: Add support for user mode XRC-SRQ's") Link: https://lore.kernel.org/r/20210404125501.154789-1-kamalheib1@gmail.com Signed-off-by: Kamal Heib <kamalheib1@gmail.com> Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
Reproduce: modprobe sch_teql tc qdisc add dev teql0 root teql0 This leads to (for instance in Centos 7 VM) OOPS: [ 532.366633] BUG: unable to handle kernel NULL pointer dereference at 00000000000000a8 [ 532.366733] IP: [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql] [ 532.366825] PGD 80000001376d5067 PUD 137e37067 PMD 0 [ 532.366906] Oops: 0000 [#1] SMP [ 532.366987] Modules linked in: sch_teql ... [ 532.367945] CPU: 1 PID: 3026 Comm: tc Kdump: loaded Tainted: G ------------ T 3.10.0-1062.7.1.el7.x86_64 #1 [ 532.368041] Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.2 04/01/2014 [ 532.368125] task: ffff8b7d37d31070 ti: ffff8b7c9fdbc000 task.ti: ffff8b7c9fdbc000 [ 532.368224] RIP: 0010:[<ffffffffc06124a8>] [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql] [ 532.368320] RSP: 0018:ffff8b7c9fdbf8e0 EFLAGS: 00010286 [ 532.368394] RAX: ffffffffc0612490 RBX: ffff8b7cb1565e00 RCX: ffff8b7d35ba2000 [ 532.368476] RDX: ffff8b7d35ba2000 RSI: 0000000000000000 RDI: ffff8b7cb1565e00 [ 532.368557] RBP: ffff8b7c9fdbf8f8 R08: ffff8b7d3fd1f140 R09: ffff8b7d3b001600 [ 532.368638] R10: ffff8b7d3b001600 R11: ffffffff84c7d65b R12: 00000000ffffffd8 [ 532.368719] R13: 0000000000008000 R14: ffff8b7d35ba2000 R15: ffff8b7c9fdbf9a8 [ 532.368800] FS: 00007f6a4e872740(0000) GS:ffff8b7d3fd00000(0000) knlGS:0000000000000000 [ 532.368885] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 532.368961] CR2: 00000000000000a8 CR3: 00000001396ee000 CR4: 00000000000206e0 [ 532.369046] Call Trace: [ 532.369159] [<ffffffff84c8192e>] qdisc_create+0x36e/0x450 [ 532.369268] [<ffffffff846a9b49>] ? ns_capable+0x29/0x50 [ 532.369366] [<ffffffff849afde2>] ? nla_parse+0x32/0x120 [ 532.369442] [<ffffffff84c81b4c>] tc_modify_qdisc+0x13c/0x610 [ 532.371508] [<ffffffff84c693e7>] rtnetlink_rcv_msg+0xa7/0x260 [ 532.372668] [<ffffffff84907b65>] ? sock_has_perm+0x75/0x90 [ 532.373790] [<ffffffff84c69340>] ? rtnl_newlink+0x890/0x890 [ 532.374914] [<ffffffff84c8da7b>] netlink_rcv_skb+0xab/0xc0 [ 532.376055] [<ffffffff84c63708>] rtnetlink_rcv+0x28/0x30 [ 532.377204] [<ffffffff84c8d400>] netlink_unicast+0x170/0x210 [ 532.378333] [<ffffffff84c8d7a8>] netlink_sendmsg+0x308/0x420 [ 532.379465] [<ffffffff84c2f3a6>] sock_sendmsg+0xb6/0xf0 [ 532.380710] [<ffffffffc034a56e>] ? __xfs_filemap_fault+0x8e/0x1d0 [xfs] [ 532.381868] [<ffffffffc034a75c>] ? xfs_filemap_fault+0x2c/0x30 [xfs] [ 532.383037] [<ffffffff847ec23a>] ? __do_fault.isra.61+0x8a/0x100 [ 532.384144] [<ffffffff84c30269>] ___sys_sendmsg+0x3e9/0x400 [ 532.385268] [<ffffffff847f3fad>] ? handle_mm_fault+0x39d/0x9b0 [ 532.386387] [<ffffffff84d88678>] ? __do_page_fault+0x238/0x500 [ 532.387472] [<ffffffff84c31921>] __sys_sendmsg+0x51/0x90 [ 532.388560] [<ffffffff84c31972>] SyS_sendmsg+0x12/0x20 [ 532.389636] [<ffffffff84d8dede>] system_call_fastpath+0x25/0x2a [ 532.390704] [<ffffffff84d8de21>] ? system_call_after_swapgs+0xae/0x146 [ 532.391753] Code: 00 00 00 00 00 00 5b 5d c3 66 2e 0f 1f 84 00 00 00 00 00 66 66 66 66 90 55 48 89 e5 41 55 41 54 53 48 8b b7 48 01 00 00 48 89 fb <48> 8b 8e a8 00 00 00 48 85 c9 74 43 48 89 ca eb 0f 0f 1f 80 00 [ 532.394036] RIP [<ffffffffc06124a8>] teql_destroy+0x18/0x100 [sch_teql] [ 532.395127] RSP <ffff8b7c9fdbf8e0> [ 532.396179] CR2: 00000000000000a8 Null pointer dereference happens on master->slaves dereference in teql_destroy() as master is null-pointer. When qdisc_create() calls teql_qdisc_init() it imediately fails after check "if (m->dev == dev)" because both devices are teql0, and it does not set qdisc_priv(sch)->m leaving it zero on error path, then qdisc_create() imediately calls teql_destroy() which does not expect zero master pointer and we get OOPS. Fixes: 87b60cf ("net_sched: fix error recovery at qdisc creation") Signed-off-by: Pavel Tikhomirov <ptikhomirov@virtuozzo.com> Reviewed-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
The following deadlock is detected: truncate -> setattr path is waiting for pending direct IO to be done (inode->i_dio_count become zero) with inode->i_rwsem held (down_write). PID: 14827 TASK: ffff881686a9af80 CPU: 20 COMMAND: "ora_p005_hrltd9" #0 __schedule at ffffffff818667cc #1 schedule at ffffffff81866de6 #2 inode_dio_wait at ffffffff812a2d04 #3 ocfs2_setattr at ffffffffc05f322e [ocfs2] #4 notify_change at ffffffff812a5a09 #5 do_truncate at ffffffff812808f5 torvalds#6 do_sys_ftruncate.constprop.18 at ffffffff81280cf2 torvalds#7 sys_ftruncate at ffffffff81280d8e torvalds#8 do_syscall_64 at ffffffff81003949 torvalds#9 entry_SYSCALL_64_after_hwframe at ffffffff81a001ad dio completion path is going to complete one direct IO (decrement inode->i_dio_count), but before that it hung at locking inode->i_rwsem: #0 __schedule+700 at ffffffff818667cc #1 schedule+54 at ffffffff81866de6 #2 rwsem_down_write_failed+536 at ffffffff8186aa28 #3 call_rwsem_down_write_failed+23 at ffffffff8185a1b7 #4 down_write+45 at ffffffff81869c9d #5 ocfs2_dio_end_io_write+180 at ffffffffc05d5444 [ocfs2] torvalds#6 ocfs2_dio_end_io+85 at ffffffffc05d5a85 [ocfs2] torvalds#7 dio_complete+140 at ffffffff812c873c torvalds#8 dio_aio_complete_work+25 at ffffffff812c89f9 torvalds#9 process_one_work+361 at ffffffff810b1889 torvalds#10 worker_thread+77 at ffffffff810b233d torvalds#11 kthread+261 at ffffffff810b7fd5 torvalds#12 ret_from_fork+62 at ffffffff81a0035e Thus above forms ABBA deadlock. The same deadlock was mentioned in upstream commit 28f5a8a ("ocfs2: should wait dio before inode lock in ocfs2_setattr()"). It seems that that commit only removed the cluster lock (the victim of above dead lock) from the ABBA deadlock party. End-user visible effects: Process hang in truncate -> ocfs2_setattr path and other processes hang at ocfs2_dio_end_io_write path. This is to fix the deadlock itself. It removes inode_lock() call from dio completion path to remove the deadlock and add ip_alloc_sem lock in setattr path to synchronize the inode modifications. [wen.gang.wang@oracle.com: remove the "had_alloc_lock" as suggested] Link: https://lkml.kernel.org/r/20210402171344.1605-1-wen.gang.wang@oracle.com Link: https://lkml.kernel.org/r/20210331203654.3911-1-wen.gang.wang@oracle.com Signed-off-by: Wengang Wang <wen.gang.wang@oracle.com> Reviewed-by: Joseph Qi <joseph.qi@linux.alibaba.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Jun Piao <piaojun@huawei.com> Cc: <stable@vger.kernel.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
On systems with KPTI enabled, we can currently observe the following warning: BUG: using smp_processor_id() in preemptible caller is invalidate_user_asid+0x13/0x50 CPU: 6 PID: 1075 Comm: dmesg Not tainted 5.12.0-rc4-gda4a2b1a5479-kfence_1+ #1 Hardware name: Hewlett-Packard HP Pro 3500 Series/2ABF, BIOS 8.11 10/24/2012 Call Trace: dump_stack+0x7f/0xad check_preemption_disabled+0xc8/0xd0 invalidate_user_asid+0x13/0x50 flush_tlb_one_kernel+0x5/0x20 kfence_protect+0x56/0x80 ... While it normally makes sense to require preemption to be off, so that the expected CPU's TLB is flushed and not another, in our case it really is best-effort (see comments in kfence_protect_page()). Avoid the warning by disabling preemption around flush_tlb_one_kernel(). Link: https://lore.kernel.org/lkml/YGIDBAboELGgMgXy@elver.google.com/ Link: https://lkml.kernel.org/r/20210330065737.652669-1-elver@google.com Signed-off-by: Marco Elver <elver@google.com> Reported-by: Tomi Sarvela <tomi.p.sarvela@intel.com> Cc: Alexander Potapenko <glider@google.com> Cc: Dmitry Vyukov <dvyukov@google.com> Cc: Andrey Konovalov <andreyknvl@google.com> Cc: Jann Horn <jannh@google.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
zetalog
pushed a commit
that referenced
this pull request
Apr 26, 2021
div_u64() divides u64 by u32. nft_limit_init() wants to divide u64 by u64, use the appropriate math function (div64_u64) divide error: 0000 [#1] PREEMPT SMP KASAN CPU: 1 PID: 8390 Comm: syz-executor188 Not tainted 5.12.0-rc4-syzkaller #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011 RIP: 0010:div_u64_rem include/linux/math64.h:28 [inline] RIP: 0010:div_u64 include/linux/math64.h:127 [inline] RIP: 0010:nft_limit_init+0x2a2/0x5e0 net/netfilter/nft_limit.c:85 Code: ef 4c 01 eb 41 0f 92 c7 48 89 de e8 38 a5 22 fa 4d 85 ff 0f 85 97 02 00 00 e8 ea 9e 22 fa 4c 0f af f3 45 89 ed 31 d2 4c 89 f0 <49> f7 f5 49 89 c6 e8 d3 9e 22 fa 48 8d 7d 48 48 b8 00 00 00 00 00 RSP: 0018:ffffc90009447198 EFLAGS: 00010246 RAX: 0000000000000000 RBX: 0000200000000000 RCX: 0000000000000000 RDX: 0000000000000000 RSI: ffffffff875152e6 RDI: 0000000000000003 RBP: ffff888020f80908 R08: 0000200000000000 R09: 0000000000000000 R10: ffffffff875152d8 R11: 0000000000000000 R12: ffffc90009447270 R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000 FS: 000000000097a300(0000) GS:ffff8880b9d00000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: 00000000200001c4 CR3: 0000000026a52000 CR4: 00000000001506e0 DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Call Trace: nf_tables_newexpr net/netfilter/nf_tables_api.c:2675 [inline] nft_expr_init+0x145/0x2d0 net/netfilter/nf_tables_api.c:2713 nft_set_elem_expr_alloc+0x27/0x280 net/netfilter/nf_tables_api.c:5160 nf_tables_newset+0x1997/0x3150 net/netfilter/nf_tables_api.c:4321 nfnetlink_rcv_batch+0x85a/0x21b0 net/netfilter/nfnetlink.c:456 nfnetlink_rcv_skb_batch net/netfilter/nfnetlink.c:580 [inline] nfnetlink_rcv+0x3af/0x420 net/netfilter/nfnetlink.c:598 netlink_unicast_kernel net/netlink/af_netlink.c:1312 [inline] netlink_unicast+0x533/0x7d0 net/netlink/af_netlink.c:1338 netlink_sendmsg+0x856/0xd90 net/netlink/af_netlink.c:1927 sock_sendmsg_nosec net/socket.c:654 [inline] sock_sendmsg+0xcf/0x120 net/socket.c:674 ____sys_sendmsg+0x6e8/0x810 net/socket.c:2350 ___sys_sendmsg+0xf3/0x170 net/socket.c:2404 __sys_sendmsg+0xe5/0x1b0 net/socket.c:2433 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46 entry_SYSCALL_64_after_hwframe+0x44/0xae Fixes: c26844e ("netfilter: nf_tables: Fix nft limit burst handling") Fixes: 3e0f64b ("netfilter: nft_limit: fix packet ratelimiting") Signed-off-by: Eric Dumazet <edumazet@google.com> Diagnosed-by: Luigi Rizzo <lrizzo@google.com> Reported-by: syzbot <syzkaller@googlegroups.com> Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
zetalog
pushed a commit
that referenced
this pull request
Jul 6, 2021
Dmytro Linkin says: ==================== Fixes for devlink rate objects API Patch #1 fixes not decreased refcount of parent node for destroyed leaf object. Patch #2 fixes incorect eswitch mode check. Patch #3 protects list traversing with a lock. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
zetalog
pushed a commit
that referenced
this pull request
Jul 6, 2021
The RX queue has an array of `gve_rx_buf_state_dqo` objects. All allocated pages have an associated buf_state object. When a buffer is posted on the RX buffer queue, the buffer ID will be the buf_state's index into the RX queue's array. On packet reception, the RX queue will have one descriptor for each buffer associated with a received packet. Each RX descriptor will have a buffer_id that was posted on the buffer queue. Notable mentions: - We use a default buffer size of 2048 bytes. Based on page size, we may post separate sections of a single page as separate buffers. - The driver holds an extra reference on pages passed up the receive path with an skb and keeps these pages on a list. When posting new buffers to the NIC, we check if any of these pages has only our reference, or another buffer sized segment of the page has no references. If so, it is free to reuse. This page recycling approach is a common netdev optimization that reduces page alloc/free calls. - Pages in the free list have a page_count bias in order to avoid an atomic increment of pagecount every time we attempt to reuse a page. # references = page_count() - bias - In order to track when a page is safe to reuse, we keep track of the last offset which had a single SKB reference. When this occurs, it implies that every single other offset is reusable. Otherwise, we don't know if offsets can be safely reused. - We maintain two free lists of pages. List #1 (recycled_buf_states) contains pages we know can be reused right away. List #2 (used_buf_states) contains pages which cannot be used right away. We only attempt to get pages from list #2 when list #1 is empty. We only attempt to use a small fixed number pages from list #2 before giving up and allocating a new page. Both lists are FIFOs in hope that by the time we attempt to reuse a page, the references were dropped. Signed-off-by: Bailey Forrest <bcf@google.com> Reviewed-by: Willem de Bruijn <willemb@google.com> Reviewed-by: Catherine Sullivan <csully@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
zetalog
pushed a commit
that referenced
this pull request
Jul 6, 2021
struct firmware::data is marked const, and when the firmware is compressed with xz (default at least with Fedora) it's mapped read-only which results in a crash: BUG: unable to handle page fault for address: ffffae57c0ca5047 PGD 100000067 P4D 100000067 PUD 1001ce067 PMD 10165a067 PTE 8000000112bba161 Oops: 0003 [#1] SMP NOPTI CPU: 3 PID: 204 Comm: kworker/u17:0 Not tainted 5.12.1-test+ #1 Hardware name: Dell Inc. XPS 13 9310/0F7M4C, BIOS 1.2.5 12/10/2020 Workqueue: hci0 hci_power_on [bluetooth] RIP: 0010:qca_download_firmware+0x27c/0x4e0 [btqca] Code: 1b 75 04 80 48 0c 01 0f b7 c6 8d 54 02 0c 41 39 d7 0f 8e 62 fe ff ff 48 63 c2 4c 01 e8 0f b7 38 0f b7 70 02 66 83 ff 11 75 d3 <80> 48 0c 80 41 83 fc 03 7e 6e 88 58 0d eb ce 41 0f b6 45 0e 48 8b RSP: 0018:ffffae57c08dfc68 EFLAGS: 00010246 RAX: ffffae57c0ca503b RBX: 000000000000000e RCX: 0000000000000000 RDX: 0000000000000037 RSI: 0000000000000006 RDI: 0000000000000011 RBP: ffff978d9949e000 R08: ffff978d84ed7540 R09: ffffae57c0ca5000 R10: 000000000010cd00 R11: 0000000000000001 R12: 0000000000000005 R13: ffffae57c0ca5004 R14: ffff978d98ca8680 R15: 00000000000016a9 FS: 0000000000000000(0000) GS:ffff9794ef6c0000(0000) knlGS:0000000000000000 CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 CR2: ffffae57c0ca5047 CR3: 0000000113d5a004 CR4: 0000000000770ee0 PKRU: 55555554 Call Trace: qca_uart_setup+0x2cb/0x1390 [btqca] ? qca_read_soc_version+0x136/0x220 [btqca] qca_setup+0x288/0xab0 [hci_uart] hci_dev_do_open+0x1f3/0x780 [bluetooth] ? try_to_wake_up+0x1c1/0x4f0 hci_power_on+0x3f/0x200 [bluetooth] process_one_work+0x1ec/0x380 worker_thread+0x53/0x3e0 ? process_one_work+0x380/0x380 kthread+0x11b/0x140 ? kthread_associate_blkcg+0xa0/0xa0 ret_from_fork+0x1f/0x30 Modules linked in: llc ip_set nf_tables nfnetlink snd_soc_skl_hda_dsp(+) ip6table_filter snd_soc_hdac_hdmi ip6_tables qrtr_mhi iptable_filter snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_codec_generic s> dell_wmi_sysman(+) dell_smbios snd dcdbas mhi vfat videobuf2_vmalloc i2c_i801 videobuf2_memops videobuf2_v4l2 dell_wmi_descriptor fat wmi_bmof soundcore i2c_smbus videobuf2_common libarc4 mei_me mei hid_se> i2c_hid_acpi i2c_hid video pinctrl_tigerlake fuse CR2: ffffae57c0ca5047 This also seems to fix a failure to suspend due to the firmware download on bootup getting interrupted by the crash: Bluetooth: hci0: SSR or FW download time out PM: dpm_run_callback(): acpi_subsys_suspend+0x0/0x60 returns -110 PM: Device serial0-0 failed to suspend: error -110 PM: Some devices failed to suspend, or early wake event detected Fixes: 83e8196 ("Bluetooth: btqca: Introduce generic QCA ROME support") Cc: Venkata Lakshmi Narayana Gubba <gubbaven@codeaurora.org> Cc: stable@vger.kernel.org Signed-off-by: Connor Abbott <cwabbott0@gmail.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
zetalog
pushed a commit
that referenced
this pull request
Jul 6, 2021
Rfkill block and unblock Intel USB Bluetooth [8087:0026] may make it stops working: [ 509.691509] Bluetooth: hci0: HCI reset during shutdown failed [ 514.897584] Bluetooth: hci0: MSFT filter_enable is already on [ 530.044751] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 545.660350] usb 3-10: device descriptor read/64, error -110 [ 561.283530] usb 3-10: device descriptor read/64, error -110 [ 561.519682] usb 3-10: reset full-speed USB device number 5 using xhci_hcd [ 566.686650] Bluetooth: hci0: unexpected event for opcode 0x0500 [ 568.752452] Bluetooth: hci0: urb 0000000096cd309b failed to resubmit (113) [ 578.797955] Bluetooth: hci0: Failed to read MSFT supported features (-110) [ 586.286565] Bluetooth: hci0: urb 00000000c522f633 failed to resubmit (113) [ 596.215302] Bluetooth: hci0: Failed to read MSFT supported features (-110) Or kernel panics because other workqueues already freed skb: [ 2048.663763] BUG: kernel NULL pointer dereference, address: 0000000000000000 [ 2048.663775] #PF: supervisor read access in kernel mode [ 2048.663779] #PF: error_code(0x0000) - not-present page [ 2048.663782] PGD 0 P4D 0 [ 2048.663787] Oops: 0000 [#1] SMP NOPTI [ 2048.663793] CPU: 3 PID: 4491 Comm: rfkill Tainted: G W 5.13.0-rc1-next-20210510+ torvalds#20 [ 2048.663799] Hardware name: HP HP EliteBook 850 G8 Notebook PC/8846, BIOS T76 Ver. 01.01.04 12/02/2020 [ 2048.663801] RIP: 0010:__skb_ext_put+0x6/0x50 [ 2048.663814] Code: 8b 1b 48 85 db 75 db 5b 41 5c 5d c3 be 01 00 00 00 e8 de 13 c0 ff eb e7 be 02 00 00 00 e8 d2 13 c0 ff eb db 0f 1f 44 00 00 55 <8b> 07 48 89 e5 83 f8 01 74 14 b8 ff ff ff ff f0 0f c1 07 83 f8 01 [ 2048.663819] RSP: 0018:ffffc1d105b6fd80 EFLAGS: 00010286 [ 2048.663824] RAX: 0000000000000000 RBX: ffff9d9ac5649000 RCX: 0000000000000000 [ 2048.663827] RDX: ffffffffc0d1daf6 RSI: 0000000000000206 RDI: 0000000000000000 [ 2048.663830] RBP: ffffc1d105b6fd98 R08: 0000000000000001 R09: ffff9d9ace8ceac0 [ 2048.663834] R10: ffff9d9ace8ceac0 R11: 0000000000000001 R12: ffff9d9ac5649000 [ 2048.663838] R13: 0000000000000000 R14: 00007ffe0354d650 R15: 0000000000000000 [ 2048.663843] FS: 00007fe02ab19740(0000) GS:ffff9d9e5f8c0000(0000) knlGS:0000000000000000 [ 2048.663849] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 2048.663853] CR2: 0000000000000000 CR3: 0000000111a52004 CR4: 0000000000770ee0 [ 2048.663856] PKRU: 55555554 [ 2048.663859] Call Trace: [ 2048.663865] ? skb_release_head_state+0x5e/0x80 [ 2048.663873] kfree_skb+0x2f/0xb0 [ 2048.663881] btusb_shutdown_intel_new+0x36/0x60 [btusb] [ 2048.663905] hci_dev_do_close+0x48c/0x5e0 [bluetooth] [ 2048.663954] ? __cond_resched+0x1a/0x50 [ 2048.663962] hci_rfkill_set_block+0x56/0xa0 [bluetooth] [ 2048.664007] rfkill_set_block+0x98/0x170 [ 2048.664016] rfkill_fop_write+0x136/0x1e0 [ 2048.664022] vfs_write+0xc7/0x260 [ 2048.664030] ksys_write+0xb1/0xe0 [ 2048.664035] ? exit_to_user_mode_prepare+0x37/0x1c0 [ 2048.664042] __x64_sys_write+0x1a/0x20 [ 2048.664048] do_syscall_64+0x40/0xb0 [ 2048.664055] entry_SYSCALL_64_after_hwframe+0x44/0xae [ 2048.664060] RIP: 0033:0x7fe02ac23c27 [ 2048.664066] Code: 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24 [ 2048.664070] RSP: 002b:00007ffe0354d638 EFLAGS: 00000246 ORIG_RAX: 0000000000000001 [ 2048.664075] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007fe02ac23c27 [ 2048.664078] RDX: 0000000000000008 RSI: 00007ffe0354d650 RDI: 0000000000000003 [ 2048.664081] RBP: 0000000000000000 R08: 0000559b05998440 R09: 0000559b05998440 [ 2048.664084] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000003 [ 2048.664086] R13: 0000000000000000 R14: ffffffff00000000 R15: 00000000ffffffff So move the shutdown callback to a place where workqueues are either flushed or cancelled to resolve the issue. Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com> Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
zetalog
pushed a commit
that referenced
this pull request
Jul 6, 2021
On non-preemptible kernel builds the watchdog can complain about soft lockups when vfree() is called against large vmalloc areas: [ 210.851798] kvmalloc-test: vmalloc(2199023255552) succeeded [ 238.654842] watchdog: BUG: soft lockup - CPU#181 stuck for 26s! [rmmod:5203] [ 238.662716] Modules linked in: kvmalloc_test(OE-) ... [ 238.772671] CPU: 181 PID: 5203 Comm: rmmod Tainted: G S OE 5.13.0-rc7+ #1 [ 238.781413] Hardware name: Intel Corporation PURLEY/PURLEY, BIOS PLYXCRB1.86B.0553.D01.1809190614 09/19/2018 [ 238.792383] RIP: 0010:free_unref_page+0x52/0x60 [ 238.797447] Code: 48 c1 fd 06 48 89 ee e8 9c d0 ff ff 84 c0 74 19 9c 41 5c fa 48 89 ee 48 89 df e8 b9 ea ff ff 41 f7 c4 00 02 00 00 74 01 fb 5b <5d> 41 5c c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 44 00 00 f0 29 77 [ 238.818406] RSP: 0018:ffffb4d87868fe98 EFLAGS: 00000206 [ 238.824236] RAX: 0000000000000000 RBX: 000000001da0c945 RCX: ffffb4d87868fe40 [ 238.832200] RDX: ffffd79d3beed108 RSI: ffffd7998501dc08 RDI: ffff9c6fbffd7010 [ 238.840166] RBP: 000000000d518cbd R08: ffffd7998501dc08 R09: 0000000000000001 [ 238.848131] R10: 0000000000000000 R11: ffffd79d3beee088 R12: 0000000000000202 [ 238.856095] R13: ffff9e5be3eceec0 R14: 0000000000000000 R15: 0000000000000000 [ 238.864059] FS: 00007fe082c2d740(0000) GS:ffff9f4c69b40000(0000) knlGS:0000000000000000 [ 238.873089] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 238.879503] CR2: 000055a000611128 CR3: 000000f6094f6006 CR4: 00000000007706e0 [ 238.887467] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 238.895433] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 238.903397] PKRU: 55555554 [ 238.906417] Call Trace: [ 238.909149] __vunmap+0x17c/0x220 [ 238.912851] __x64_sys_delete_module+0x13a/0x250 [ 238.918008] ? syscall_trace_enter.isra.20+0x13c/0x1b0 [ 238.923746] do_syscall_64+0x39/0x80 [ 238.927740] entry_SYSCALL_64_after_hwframe+0x44/0xae Like in other range zapping routines that iterate over a large list, lets just add cond_resched() within __vunmap()'s page-releasing loop in order to avoid the watchdog splats. Link: https://lkml.kernel.org/r/20210622225030.478384-1-aquini@redhat.com Signed-off-by: Rafael Aquini <aquini@redhat.com> Acked-by: Nicholas Piggin <npiggin@gmail.com> Reviewed-by: Uladzislau Rezki (Sony) <urezki@gmail.com> Reviewed-by: Aaron Tomlin <atomlin@redhat.com> Acked-by: Michal Hocko <mhocko@suse.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Signed-off-by: Ge Song songgebird@gmail.com