Repository navigation
ForgeMiner v2.1.1
Faster Proxima (PROX) on every card, a steady hashrate on HiveOS while a Proxima pool waits between jobs, and faster Xelis on the RTX 30 and RTX 50 series.
Proxima (PROX): faster on every card
- RTX 50: +15 %, RTX 20 / 30 / 40: +2 %, AMD: up to +1 % on the jobs most pools send, against 2.1.0 on the same cards and clocks.
- On top of that, +1.5–2.8 % on a live pool, every card: the next piece of work is already waiting while the card finishes the current one.
- Pools that send the long form of the job: +14–31 % on every card.
- Every share is still checked on the CPU before it is sent.
A steady hashrate while the pool waits
- A Proxima pool can leave a gap between one job and the next, up to about a tenth of the time. The miner now reports what the card does while it hashes, so the HiveOS graph and the hashrate column stay level instead of dipping after each gap. Efficiency (MH/W) stays level too; the power column still shows the real draw.
- A card whose clocks drop in that gap now stays busy through it (seen on Windows), so the next job starts at full speed: +6 % on an RTX 4060 on such a pool, for about +8 % power. The miner turns this on by itself, only for a card that comes back slow; cards that keep their clocks run as before.
- A card with no work for 30 seconds still reads zero, as before.
Xelis: faster on the RTX 30 and RTX 50 series
- RTX 3060: +11.6 %, RTX 5060 Ti: +4.6 %. The other RTX 30 and RTX 50 cards get the same change.
- Shares reach the pool sooner after they are found, so a pool that keeps only the last few jobs turns down fewer of them. The RTX 20 and RTX 40 series are unchanged.
Pools and launchers
- Zano: the wallet field also takes a pool account (
Kr...), for pools that log in with one. - More ready launchers: a third pool on Proxima (3 regions), and one more pool on Pearl, Quantus, Xelis and Zano. The README lists the servers and what goes in the wallet for each.
- Launchers for pools that stopped serving them are gone: two Ravencoin TLS ones (the pool's port no longer answers over TLS; its plain ones stay) and eight Neurai ones for a pool that no longer runs Neurai (the other Neurai pools stay).
Also
- The RTX 50 series needs NVIDIA driver 580 or newer (unchanged).
- HiveOS custom miner — upgrade with the versioned URL:
https://github.com/0xHashRaptor/ForgeMiner/releases/download/v2.1.1/ForgeMiner-2.1.1.tar.gz.
Checksums (sha256)
1a549aebd5a68adf1b4055262339527d1bf5a71eb333114b692ec696e158b097 ForgeMiner-2.1.1-windows.zip
80229d571a332569fdd1dd294abee8813fa07820f6fd827fc58e1f6e555b5a4e ForgeMiner-2.1.1-linux.tar.gz
172f968315a1584f30c6a194341f87b558681571e00e8e140dc32563167aab02 ForgeMiner-2.1.1.tar.gz
Русский
ForgeMiner v2.1.1
Proxima (PROX) быстрее на всех картах, ровный хешрейт в HiveOS, пока пул Proxima ждёт между заданиями, и более быстрый Xelis на RTX 30 и RTX 50.
Proxima (PROX): быстрее на всех картах
- RTX 50: +15 %, RTX 20 / 30 / 40: +2 %, AMD: до +1 % на заданиях, которые шлёт большинство пулов, — к 2.1.0 на тех же картах и том же разгоне.
- Сверху ещё +1,5–2,8 % на живом пуле, на всех картах: следующая порция работы уже ждёт, пока карта доделывает текущую.
- Пулы, которые шлют длинную форму задания: +14–31 % на всех картах.
- Каждая шара по-прежнему проверяется на CPU перед отправкой.
Ровный хешрейт, пока пул ждёт
- Пул Proxima может делать паузу между заданиями — до десятой доли времени. Теперь майнер показывает скорость карты за то время, что она считает, поэтому график HiveOS и колонка хешрейта идут ровно, без провала после каждой паузы. Эффективность (MH/W) тоже ровная; колонка мощности показывает реальное потребление.
- Карта, у которой в паузе падает частота, теперь не простаивает (так бывает на Windows), и следующее задание начинается на полной скорости: +6 % на RTX 4060 на таком пуле, при потреблении примерно +8 %. Майнер включает это сам и только для карты, которая после паузы считает медленнее; карты, которые держат частоту, работают как раньше.
- Карта без работы дольше 30 секунд, как и раньше, показывает ноль.
Xelis: быстрее на RTX 30 и RTX 50
- RTX 3060: +11,6 %, RTX 5060 Ti: +4,6 %. Остальные карты RTX 30 и RTX 50 получают то же изменение.
- Шары уходят на пул быстрее после того, как найдены, поэтому пул, который держит только несколько последних заданий, отклоняет их реже. RTX 20 и RTX 40 — без изменений.
Пулы и батники
- Zano: в поле кошелька теперь можно вписать и аккаунт пула (
Kr...) — для пулов, которые пускают по аккаунту. - Больше готовых батников: третий пул на Proxima (3 региона) и ещё один пул на Pearl, Quantus, Xelis и Zano. Серверы и что вписывать в кошелёк для каждого — в README.
- Убраны батники пулов, которые перестали их обслуживать: два батника Ravencoin с TLS (порт пула больше не отвечает по TLS; обычные батники этого пула остались) и восемь батников Neurai для пула, который убрал Neurai (остальные пулы Neurai остались).
Также
- Для RTX 50 нужен драйвер NVIDIA 580 или новее (без изменений).
- HiveOS, свой майнер — обновляться по ссылке с версией:
https://github.com/0xHashRaptor/ForgeMiner/releases/download/v2.1.1/ForgeMiner-2.1.1.tar.gz.
Контрольные суммы (sha256)
1a549aebd5a68adf1b4055262339527d1bf5a71eb333114b692ec696e158b097 ForgeMiner-2.1.1-windows.zip
80229d571a332569fdd1dd294abee8813fa07820f6fd827fc58e1f6e555b5a4e ForgeMiner-2.1.1-linux.tar.gz
172f968315a1584f30c6a194341f87b558681571e00e8e140dc32563167aab02 ForgeMiner-2.1.1.tar.gz