Skip to content

Features Sub GHz

Lucian edited this page Oct 29, 2026 · 1 revision

Sub-GHz

Every Sub-GHz (CC1101) tool. The device is the raw radio front end; the phone does the decoding, De Bruijn computation and storage. Gated on caps.cc1101.

For authorized security research and education only. Replay, jammer, brute force and De Bruijn tools are dual-use - only run them against systems you own or are explicitly permitted to test.

Capture & save

Captures raw OOK timings (subghz.raw stream) and lets you export/import CSV and Flipper .sub files, so captures move freely between Brucia and Flipper Zero.

On-phone OOK decode

Decodes Princeton / PT2262 / EV1527 protocols and a rolling-code decoder, all on the phone. A decode sample works with no hardware attached, useful for trying the tool before you have a device.

Spectrum waterfall

Live CC1101 RSSI sweep (subghz.spectrum stream, optional sweep window) to see activity across the band before capturing.

Replay

Replays a captured signal (subghz_replay) back out the CC1101.

Raw transmit

Transmits a raw edge list (subghz_tx_raw) built or imported on the phone.

De Bruijn brute force

For fixed OOK codes, the phone computes the shortest De Bruijn sequence that covers every possible code and the device transmits it - far more efficient than brute-forcing each code individually. Authorized testing only.

Jammer

Bounded sub-GHz noise (subghz_jammer). Authorized testing only.

Brute force

A bounded brute-force transmit (subghz_bruteforce) for fixed-code receivers. Authorized testing only.

Config

Sets RX/TX frequency, modulation, bandwidth and data rate (subghz_config) before any capture or transmit.


Back to Features.

Clone this wiki locally