Repository navigation
v0.25.1
Fixed
-
Pour completion cut by
--timeoutis reported as its own outcome (Issue #8078). When the KiCad-oracle pour stage stops on the deadline with links still open,kct routenow logs the time-left / DRC-cost / attempt-estimate that made the gate refuse and says the closer was cut by--timeoutinstead of presenting the links as plain unconnected GND/VCC nets. -
Bench rows label a pour-completion deadline cut (Issue #8078).
expand_route_experiment.pynow recordspour_cut_by_timeoutand the route table's Timeout cell readsyes (pour completion cut), so open GND/VCC links caused by--timeoutare distinguishable from a closer failure. The manufacturable verdict is unchanged. -
kct pcb reinforcehonors the board's own clearance rules (Issue #8085).
Anchors are now checked against the net-class clearance floors from the
.kicad_pro(askct checkreads them), and with the new--voltage-map
(plus--creepage-standard,--pollution-degree,--material-group,
--hv-threshold) against the pairwise IEC requirementkct routeuses. The
hole-to-hole check now includes same-net PTH pads and vias, so anchors no
longer land on pad drills. Refusals report the governing rule
(hole_to_hole/dru_class_floor/voltage_map_pairwise) with required
vs actual mm in text and JSON. -
silk_overlapno longer flags T-joints within one footprint (Issue #8090).
A line ending mid-span on anotherfp_lineof the same footprint is treated
like a corner join; duplicates, collinear overlaps, X-crossings and
cross-footprint pairs still flag. -
kct pcb current-paths-auditno longer reports a correct Kelvin layout as ambiguous (Issue #8092). A thin sense tap off an endpoint pad (stub -> via -> sense-IC pad, acyclic and narrower than the force copper) is now set aside from the endpoint-fanout judgement and listed inPathResolution.sense_tapsinstead of being treated as a force leg; rejoining, equally wide or dangling taps and real via arrays stay ambiguous.