Repository navigation
v1.2.0
Fixed
- ESP32-S2 stub upload no longer fails/hangs — the stub now loads and
runs correctly on S2 boards instead of falling back or wedging the
bootloader. - Fixed a flashing issue affecting ESP8266 boards.
- Baud-renegotiation recovery on UART-bridge boards (CH340/CP2102/FTDI)
Added
--no-stubflag onwrite: skip the RAM stub entirely and use the
plain ROM loader. Recommended on boards with no auto-reset circuit
(e.g. native-USB S2 boards with only a BOOT button), since a failed
stub handshake can jump the chip out of the ROM bootloader with no
way back in except physically re-holding BOOT.
Changed
-
Visual refresh: updated banner and terminal output colors.
-
Long file paths in log output (e.g. Termux's
/data/data/com.termux/files/home/...) are now shortened for
readability — home directory collapses to~, anything still too
long collapses to.../filename.bin. -
nrflash now uses the
espbridgelibrary. check README for updating guide.Docs
-
README: documented
--no-stub, added an "Updating" section covering
pip install --upgrade(and--no-cache-dirfor when pip serves a
stale cached wheel).