Skip to content

ANet Relay v0.3.0

Choose a tag to compare

@github-actions github-actions released this 07 Nov 18:17
· 123 commits to main since this release

A director's-cut opening, bench procedures that calibrate and test an aircraft
step by step, a physical flight model for simulators, control feel presets and
RC transmitters, and a LAN arena in which simulated aircraft see and shoot at
each other.

Added

  • Opening: on the first launch of each version a 5.6 s director's cut plays (a
    voxel logo, a diagonal voxel cut into a film, a voxel reveal); later launches
    play a 3.2 s short cut. Any key, click or controller button skips it, and
    Settings → General → Opening sequence chooses Full, Short (the default) or
    Minimal (the 1.2 s opening of 0.2). The 8 s and 20 s start-up warnings keep
    their timing, the emergency stop works during the opening, and with reduced
    motion it takes at most 400 ms and loads no video. Panel loading, workspace
    switches, replays and the 3D stage use the same voxel language.
  • Bench procedures: full_bench, preflight_quick, motor_check,
    vibration_check and hover_tune chain twelve steps (link and firmware,
    battery at rest, parameter baseline, sensor calibration, stick directions,
    motor order and direction, ground vibration, propellers fitted, hover test,
    step response, hover learning, report). Each step measures, judges against a
    stated limit and suggests parameter changes by name and direction; nothing is
    written without the operator's consent, and the existing confirm words and
    limits apply. Reports are saved, listed under Records → Bench reports and
    exported as JSON or a bilingual Markdown table. New inspector tab Bench,
    GET /procedures, /vehicles/{id}/procedure (start, answer, abort),
    /test-runs, five procedure_* events, seven tools each in the device MCP
    server (now 36 tools) and in Copilot, and SDK calls.
  • Simulator hover assist: every simulator has a hover-assist switch (setting
    sim_hover_assist, on by default). Off, it flies like a racing quad without
    barometer or position source: the throttle is thrust, the hover point rises as
    the battery sags, hold modes are refused, and ground effect, motor lag,
    turbulence (setting sim_turbulence) and propeller wake act. The switch works
    in flight without a thrust jump. POST /sims/{id}/assist, event
    sim_assist_changed, vehicle.sim in the snapshot, MCP app_sim_assist
    (the app MCP server now has 42 tools).
  • Control feel: Gentle, Standard (the default) and Sport presets scale tilt, yaw
    and keyboard reach; the throttle has its own linear curve with an optional
    centre detent in hold modes; the right stick has a radial dead zone; Mode 1
    and per-axis inversion. Keys Z (throttle to the hover point) and H (hover
    assist); Triangle switches hover assist on a simulator and altitude hold on a
    real aircraft; the D-pad changes the feel.
  • RC transmitters in USB joystick mode (EdgeTX, OpenTX, RadioMaster, Jumper,
    FrSky, TBS and others) and non-standard controllers: an AETR default with an
    absolute throttle, a mapping wizard that learns axes, directions, centres and
    end points, and switch bindings for hover assist, fire, arm (simulators) and
    stop. A transmitter starts sending sticks only once its throttle is lowest, or
    centred in hold modes.
  • Driving HUD on the stage while an aircraft is flown: aircraft, controller,
    mode, hover assist, feel, the throttle actually sent against the hover point,
    and in the arena the aircraft's hit points and ammunition.
  • LAN arena: the top-bar Arena switch joins every Relay terminal on the same
    network without rooms or a lobby. Remote simulators appear on the stage in
    graphite; rounds follow a shared ballistic model; the owner of the aircraft
    that is hit judges the hit; 20 damage per round, five bring a simulator down,
    and it respawns after 5 s. Scoreboard, crosshair and hit direction on the
    stage. GET /arena, POST /vehicles/{id}/fire, the stream messages arena
    and fire, events peer_joined, peer_left, arena_hit and arena_down,
    settings peer_port, peer_callsign and arena_auto_respawn, SDK arena()
    and fire(). Real aircraft never join the arena and are never affected by
    virtual rounds. The arena adds one UDP socket (port 47114 by default) that
    carries no control: nothing received from the network reaches sticks, arming,
    claims, parameters, skills, plans or device calls.
  • Installer art: a DMG window background and layout on macOS, and wizard sidebar
    and header images in the Windows installer.

Changed

  • Keyboard pitch and roll reach follows the control feel (0.6, 0.8 or 1.0)
    instead of a fixed half stick; in hold modes R and F climb and descend
    only while held.
  • The flight tuning and hardware guides (Chinese) start from the bench
    procedure.

Fixed

  • The app:// protocol answers byte-range requests with 206 and 416, so video
    served from the application bundle can seek.

Downloads

Platform File
macOS (Apple silicon) ANet-Relay-0.3.0-mac-arm64.dmg, ANet-Relay-0.3.0-mac-arm64.zip
macOS (Intel) ANet-Relay-0.3.0-mac-x64.dmg, ANet-Relay-0.3.0-mac-x64.zip
Linux x64 ANet-Relay-0.3.0-linux-x64.AppImage, ANet-Relay-0.3.0-linux-x64.tar.gz
Windows x64 ANet-Relay-0.3.0-win-x64.exe

Verify downloads against SHA256SUMS.txt. The macOS build is signed and
notarized: drag it to Applications and open it. The Windows installer is not
code-signed; when SmartScreen warns, choose More info → Run anyway.

Known limitations

  • The arena has been tested with several terminals on one machine over
    loopback; networks that block both multicast and broadcast keep terminals
    apart.
  • The flight steps of a bench procedure (S9, S10) need altitude hold: on a
    simulator with hover assist off they fail at once with that reason.
  • Transmitter detection and the mapping wizard have been tested with synthetic
    controller readings only, not yet with transmitter hardware.