Repository navigation
ANet Relay v0.5.3
Stick timelines with their own file format, simulators that drift like a real
airframe in altitude hold, and a fix for real aircraft that would not arm from
the Lab.
Added
- Timeline sequences (
.ars, ANet Relay Sequence): four stick tracks
(throttle, pitch, roll, yaw) of blocks on one time line, opened from Control →
Timeline sequence, the command palette or Records → Open as sequence. The dock
under the stage shows the playhead while it flies.- Drag a block up or down to change its stick, drag its right edge to change
how long it lasts. The arrow keys nudge the stick by 0.01 and the length by
0.1 s. Blocks can be split, inserted and removed, edits can be undone, and
blocks hold or ramp to the next one. - Both sticks at a glance: a strip above the time line draws the two sticks
at every moment a stick changes, and two stick pads show them at the
cursor. Drag a pad to set both sticks from that moment on (Mode 1 or 2,
as in Settings → Controllers). - A trim on all four axes is added to every frame and changes in flight:
cancel a forward drift with a little negative pitch. - Edits to blocks not yet flown reach the aircraft at once.
- Record: the sticks an armed aircraft receives (gamepad, keyboard, plan,
program) become blocks. - Takeoff template, import and export of
.arsfiles. The same file flies
simulators and real aircraft (ARM confirmation on real ones). - API:
POST/PATCH /vehicles/{id}/sequence,
POST /vehicles/{id}/sequence/stop,POST /vehicles/{id}/sequence/record,
GET /history/sessions/{sid}/sequence; eventssequence_started,
sequence_edited,sequence_recording.
- Drag a block up or down to change its stick, drag its right edge to change
- Simulator airframe:
- Also with altitude hold (
with_assist): the CG offset, level error and
the other defects act with hover assist on, so a timeline can be tuned on a
simulator that tilts and drifts like the real aircraft. - Random level error per arming (
arm_bias_deg): a new error of up to 3°
at every arming, like a gyro bias that changes from flight to flight. - The inspector shows this flight's level error (
level_now_deg).
- Also with altitude hold (
- Copilot, flight MCP and SDK:
- New tools
relay_timeline_run,relay_timeline_edit,
relay_timeline_stop,relay_timeline_recordand
relay_timeline_from_record. The flight MCP server now has 26 tools, 18 at
the sticks level, where timelines fly in stabilize. airframe_settakeswith_assistandarm_bias_deg.- The SDK adds
timeline_*,load_arsandsave_ars.
- New tools
Fixed
- Real aircraft did not arm from the Lab. PX4 and ArduPilot arm STABILIZE or
ALT_HOLD only while they see pilot input ("No manual control input",
"Throttle below failsafe"), and a program released the sticks while the
aircraft was disarmed. Now:- Programs hold centred zero-throttle sticks while disarmed.
- An arming deployment sends them before it switches mode and arms.
POST /vehicles/{id}/armsends them first when nothing else feeds the
aircraft.- Skills that arm (take-off, plans, re-fly, timelines) send 0.3 s of
centred zero-throttle sticks before the arm command. - Simulators refuse to arm without pilot input, as the autopilots do.
- An aircraft that is already armed gets no zero-throttle sticks, and an
emergency stop or a change of control during the short wait cancels the
arm instead of arming after it.
- Timelines in the air never drop the throttle: one started in flight begins
on its own first frame, a stabilize timeline cannot start in the air on a
ground throttle, and a stop holds the throttle of that moment rather than the
one the timeline ends on. - Esc in the timeline dock first clears the block selection and otherwise
still stops the aircraft. Undo and redo reach an aircraft that is flying the
timeline.