Skip to content

Releases

WatchBridge 0.1.6

Choose a tag to compare

@AdminZachary AdminZachary released this 18 Nov 18:43

WatchBridge 0.1.6

One fix, from a report where the sign-in dialog could not be dismissed.

What changed

  • The two-factor dialog can be cancelled. It had no close button, Esc did nothing, and it stayed on screen after the attempt failed — so an account whose trusted device never received the prompt was stuck with it, and could not open Settings to export a log. It now has a close button and a cancel action that tells the backend to give up, and the dialog closes itself whenever the sign-in attempt ends, successful or not.
  • The dialog hints at what to do. A short line explains that if no prompt appears on the trusted devices, cancelling and trying again is expected — some accounts are asked for a different verification method entirely.

Downloads

Asset Platform Contents
WatchBridge-0.1.6-arm64.dmg macOS on Apple Silicon WatchBridge.app, ad-hoc signed, licence inventory inside the bundle
WatchBridge-0.1.6-x86_64.dmg macOS on Intel Same, native x86_64 build
watchbridge-windows.zip Windows 10 / 11 (x64) WatchBridge.exe, BUILD.json, SHA256SUMS.txt, LICENSES.zip
WatchBridge_0.1.6_amd64.deb Linux (Debian/Ubuntu, x86_64) Installs /usr/bin/watchbridge and a desktop entry
WatchBridge-0.1.6-1.x86_64.rpm Linux (Fedora, x86_64) Same, RPM packaging

Requirements

Windows — Windows 10 22H2 or Windows 11 on x64, Apple Mobile Device Service (iTunes or the Apple Devices app) and the WebView2 runtime.

macOS — macOS 11 or newer on Apple Silicon or Intel, without Xcode.

Linux — the usbmuxd daemon, WebKitGTK 4.1, a Secret Service keyring and xdg-desktop-portal. GNOME and KDE provide the last two by default.

All three need an iPhone already paired with the target Watch, and a cable for the preparation step.

Installing on Linux

sudo apt install ./WatchBridge_0.1.6_amd64.deb    # Debian/Ubuntu
sudo dnf install ./WatchBridge-0.1.6-1.x86_64.rpm # Fedora
sudo systemctl enable --now usbmuxd
watchbridge

Installing on macOS

The bundle is ad-hoc signed but not notarized. The first launch is blocked by Gatekeeper: allow it once under System Settings → Privacy & Security → Open Anyway, then open the app again.

Known limitations

  • The Windows executable is unsigned, so SmartScreen warns on first run; the macOS bundle is not notarized.
  • Automatic renewal's "start at login" option is Windows-only.
  • One paired Watch per iPhone. Only IPAs that contain both the iPhone host and Watch/*.app are supported.
  • The signing dependency apple-codesign-quick does not declare a licence; see docs/LICENSE_REVIEW.md.

WatchBridge is an independent community derivative of iLoader and is not affiliated with Apple or with any upstream project.

WatchBridge 0.1.5

Choose a tag to compare

@AdminZachary AdminZachary released this 18 Nov 17:59

WatchBridge 0.1.5

Two more sign-in fixes, both from reports where the app stopped further than it needed to.

What changed

  • A missing phone-number list no longer ends the sign-in. When Apple asks for SMS verification, the app fetches the trusted phone numbers first. For some accounts that request is refused, and the app then reported that the account had no trusted number — which was wrong. It now keeps the real reason, and falls back to pushing a code to the trusted devices instead of stopping. The fallback is used once per sign-in, so a rejected prompt cannot loop.
  • -22411 explains itself. "This action cannot be completed at this time" is Apple temporarily refusing the developer token, usually because the Apple Developer agreement has not been accepted or the account has been throttled after repeated attempts. The message now says that instead of showing the raw error chain.

Downloads

Asset Platform Contents
WatchBridge-0.1.5-arm64.dmg macOS on Apple Silicon WatchBridge.app, ad-hoc signed, licence inventory inside the bundle
WatchBridge-0.1.5-x86_64.dmg macOS on Intel Same, native x86_64 build
watchbridge-windows.zip Windows 10 / 11 (x64) WatchBridge.exe, BUILD.json, SHA256SUMS.txt, LICENSES.zip
WatchBridge_0.1.5_amd64.deb Linux (Debian/Ubuntu, x86_64) Installs /usr/bin/watchbridge and a desktop entry
WatchBridge-0.1.5-1.x86_64.rpm Linux (Fedora, x86_64) Same, RPM packaging

Requirements

Windows — Windows 10 22H2 or Windows 11 on x64, Apple Mobile Device Service (iTunes or the Apple Devices app) and the WebView2 runtime.

macOS — macOS 11 or newer on Apple Silicon or Intel, without Xcode.

Linux — the usbmuxd daemon, WebKitGTK 4.1, a Secret Service keyring and xdg-desktop-portal. GNOME and KDE provide the last two by default.

All three need an iPhone already paired with the target Watch, and a cable for the preparation step.

Installing on Linux

sudo apt install ./WatchBridge_0.1.5_amd64.deb    # Debian/Ubuntu
sudo dnf install ./WatchBridge-0.1.5-1.x86_64.rpm # Fedora
sudo systemctl enable --now usbmuxd
watchbridge

Installing on macOS

The bundle is ad-hoc signed but not notarized. The first launch is blocked by Gatekeeper: allow it once under System Settings → Privacy & Security → Open Anyway, then open the app again.

Known limitations

  • The Windows executable is unsigned, so SmartScreen warns on first run; the macOS bundle is not notarized.
  • Automatic renewal's "start at login" option is Windows-only.
  • One paired Watch per iPhone. Only IPAs that contain both the iPhone host and Watch/*.app are supported.
  • The signing dependency apple-codesign-quick does not declare a licence; see docs/LICENSE_REVIEW.md.

WatchBridge is an independent community derivative of iLoader and is not affiliated with Apple or with any upstream project.

WatchBridge 0.1.4

Choose a tag to compare

@AdminZachary AdminZachary released this 16 Nov 17:01

WatchBridge 0.1.4

Four sign-in fixes. Two of them unblock users who could not get past the Apple ID
step at all. This release addresses #9, #10 and #11 — thanks to everyone who sent
logs, they made both bugs visible.

What changed

  • Sign-in no longer assumes the trusted phone number is id 1. The SMS step always started with a hardcoded number id, so accounts whose trusted number had another id were rejected by Apple before any code was sent. The app now uses the id Apple reports, and if Apple answers with a challenge for a different number it retries once with that one.
  • A failed phone-number lookup no longer blocks trusted-device sign-in. The number list is only needed for the SMS fallback, but the login treated a failure as fatal. Accounts that answer 403 for that lookup can now complete the trusted-device prompt instead of being stopped before it appears.
  • Certificate errors explain themselves. Previously the raw Developer Portal error was shown, so "at the limit" and "a request that was never completed" looked identical. Each case now has its own message: certificate limit, unfinished request (usually expires within 24 hours), and a certificate that does not belong to the team.

Downloads

Asset Platform Contents
WatchBridge-0.1.4-arm64.dmg macOS on Apple Silicon WatchBridge.app, ad-hoc signed, licence inventory inside the bundle
WatchBridge-0.1.4-x86_64.dmg macOS on Intel Same, native x86_64 build
watchbridge-windows.zip Windows 10 / 11 (x64) WatchBridge.exe, BUILD.json, SHA256SUMS.txt, LICENSES.zip
WatchBridge_0.1.4_amd64.deb Linux (Debian/Ubuntu, x86_64) Installs /usr/bin/watchbridge and a desktop entry
WatchBridge-0.1.4-1.x86_64.rpm Linux (Fedora, x86_64) Same, RPM packaging

Requirements

Windows — Windows 10 22H2 or Windows 11 on x64, Apple Mobile Device Service (iTunes or the Apple Devices app) and the WebView2 runtime.

macOS — macOS 11 or newer on Apple Silicon or Intel, without Xcode.

Linux — the usbmuxd daemon, WebKitGTK 4.1, a Secret Service keyring and xdg-desktop-portal. GNOME and KDE provide the last two by default.

All three need an iPhone already paired with the target Watch, and a cable for the preparation step.

Installing on Linux

sudo apt install ./WatchBridge_0.1.4_amd64.deb    # Debian/Ubuntu
sudo dnf install ./WatchBridge-0.1.4-1.x86_64.rpm # Fedora
sudo systemctl enable --now usbmuxd
watchbridge

Installing on macOS

The bundle is ad-hoc signed but not notarized. The first launch is blocked by Gatekeeper: allow it once under System Settings → Privacy & Security → Open Anyway, then open the app again.

Known limitations

  • The Windows executable is unsigned, so SmartScreen warns on first run; the macOS bundle is not notarized.
  • Automatic renewal's "start at login" option is Windows-only.
  • One paired Watch per iPhone. Only IPAs that contain both the iPhone host and Watch/*.app are supported.
  • The signing dependency apple-codesign-quick does not declare a licence; see docs/LICENSE_REVIEW.md.

WatchBridge is an independent community derivative of iLoader and is not affiliated with Apple or with any upstream project.

WatchBridge 0.1.3

Choose a tag to compare

@AdminZachary AdminZachary released this 15 Nov 18:53

WatchBridge 0.1.3

Linux joins Windows and macOS: the same Watch preparation and companion install flow now runs on all three platforms. Thanks to @seomin0610 for the Linux port and for validating it on real hardware.

What changed

  • Linux builds. Releases now include a .deb and an .rpm for x86_64, built from the same source tree as the other platforms. Device communication goes through the system usbmuxd daemon, so no Apple software is required — the open-source daemon replaces Apple Mobile Device Service on Linux.
  • The file picker follows the desktop. On Linux the dialogs go through xdg-desktop-portal instead of GTK, which is what makes "Choose IPA" work under GNOME, KDE and tiling window managers alike. The package declares that dependency, so apt install brings it in.
  • Windows and macOS are unchanged. The dialog backend there stays the native one; the Linux switch is scoped to Linux in the dependency graph.

Downloads

Asset Platform Contents
WatchBridge-0.1.3-arm64.dmg macOS on Apple Silicon WatchBridge.app, ad-hoc signed, licence inventory inside the bundle
WatchBridge-0.1.3-x86_64.dmg macOS on Intel Same, native x86_64 build
watchbridge-windows.zip Windows 10 / 11 (x64) WatchBridge.exe, BUILD.json, SHA256SUMS.txt, LICENSES.zip
WatchBridge_0.1.3_amd64.deb Linux (Debian/Ubuntu, x86_64) Installs /usr/bin/watchbridge and a desktop entry
WatchBridge-0.1.3-1.x86_64.rpm Linux (Fedora, x86_64) Same, RPM packaging

Requirements

Windows — Windows 10 22H2 or Windows 11 on x64, Apple Mobile Device Service (iTunes or the Apple Devices app) and the WebView2 runtime.

macOS — macOS 11 or newer on Apple Silicon or Intel, without Xcode.

Linux — the usbmuxd daemon, WebKitGTK 4.1, a Secret Service keyring and xdg-desktop-portal. GNOME and KDE provide the last two by default.

All three need an iPhone already paired with the target Watch, and a cable for the preparation step.

Installing on Linux

sudo apt install ./WatchBridge_0.1.3_amd64.deb    # Debian/Ubuntu
sudo dnf install ./WatchBridge-0.1.3-1.x86_64.rpm # Fedora
sudo systemctl enable --now usbmuxd
watchbridge

Installing on macOS

The bundle is ad-hoc signed but not notarized. The first launch is blocked by Gatekeeper: allow it once under System Settings → Privacy & Security → Open Anyway, then open the app again.

Known limitations

  • The Windows executable is unsigned, so SmartScreen warns on first run; the macOS bundle is not notarized.
  • Automatic renewal's "start at login" option is Windows-only.
  • One paired Watch per iPhone. Only IPAs that contain both the iPhone host and Watch/*.app are supported.
  • The signing dependency apple-codesign-quick does not declare a licence; see docs/LICENSE_REVIEW.md.

WatchBridge is an independent community derivative of iLoader and is not affiliated with Apple or with any upstream project.

WatchBridge 0.1.2

Choose a tag to compare

@AdminZachary AdminZachary released this 15 Nov 10:58

WatchBridge 0.1.2

A maintenance release: one sign-in fix that affects a subset of accounts, and clearer messages when something fails.

What changed

  • Sign-in now recovers from the -23782 rejection. Some Apple accounts refuse the macOS version a public anisette server reports (Mac OS X;10.12.6), and the sign-in never reaches the password step. WatchBridge now signs in with the identity the server reports, and only when Apple answers -23782 does it retry once with a modern Mac identity, keeping that identity for the rest of the session. Accounts that already sign in are unaffected. Thanks to @nbzz for the original fix.
  • Errors are translated. Watch-pairing, watch-install and log-export failures now go through the translation layer: English and Simplified Chinese are complete, and other languages fall back to English until translated.

Downloads

Asset Platform Contents
WatchBridge-0.1.2-arm64.dmg macOS on Apple Silicon WatchBridge.app, ad-hoc signed, licence inventory inside the bundle
WatchBridge-0.1.2-x86_64.dmg macOS on Intel Same, native x86_64 build
watchbridge-windows.zip Windows 10 / 11 (x64) WatchBridge.exe, BUILD.json, SHA256SUMS.txt, LICENSES.zip

Requirements

Windows — Windows 10 22H2 or Windows 11 on x64, Apple Mobile Device Service (iTunes or the Apple Devices app) and the WebView2 runtime.

macOS — macOS 11 or newer on Apple Silicon or Intel. The system usbmuxd is used directly, so there is no driver to install.

Both platforms need an iPhone already paired with the target Watch, and a cable for the preparation step.

Installing on macOS

The bundle is ad-hoc signed but not notarized. The first launch is blocked by Gatekeeper: allow it once under System Settings → Privacy & Security → Open Anyway, then open the app again.

Known limitations

  • The Windows executable is unsigned, so SmartScreen warns on first run; the macOS bundle is not notarized.
  • Automatic renewal's "start at login" option is Windows-only.
  • One paired Watch per iPhone. Only IPAs that contain both the iPhone host and Watch/*.app are supported.
  • The signing dependency apple-codesign-quick does not declare a licence; see docs/LICENSE_REVIEW.md.

WatchBridge is an independent community derivative of iLoader and is not affiliated with Apple or with any upstream project.

WatchBridge 0.1.1

Choose a tag to compare

@AdminZachary AdminZachary released this 13 Nov 15:39

WatchBridge 0.1.1

A small follow-up to 0.1.0. The binaries are unchanged in behaviour except for the two fixes below; there is no new sideloading capability in this release.

What changed

  • The main screen is translated. Every string on the start screen — headings, step instructions, buttons, status and result messages, the attribution footer — now goes through the translation layer instead of being hardcoded. English, Korean and Simplified Chinese are complete; the remaining locales fall back to English until translations arrive.
  • Improved readability.

Downloads

Asset Platform Contents
WatchBridge-0.1.1-arm64.dmg macOS on Apple Silicon WatchBridge.app, ad-hoc signed, licence inventory inside the bundle
WatchBridge-0.1.1-x86_64.dmg macOS on Intel Same, native x86_64 build
watchbridge-windows.zip Windows 10 / 11 (x64) WatchBridge.exe, BUILD.json, SHA256SUMS.txt, LICENSES.zip

Requirements

Windows — Windows 10 22H2 or Windows 11 on x64, Apple Mobile Device Service (iTunes or the Apple Devices app) and the WebView2 runtime.

macOS — macOS 11 or newer on Apple Silicon or Intel. The system usbmuxd is used directly, so there is no driver to install.

Both platforms need an iPhone already paired with the target Watch, and a cable for the preparation step.

Installing on macOS

The bundle is ad-hoc signed but not notarized. The first launch is blocked by Gatekeeper: allow it once under System Settings → Privacy & Security → Open Anyway, then open the app again.

Known limitations

  • The Windows executable is unsigned, so SmartScreen warns on first run; the macOS bundle is not notarized.
  • Automatic renewal's "start at login" option is Windows-only.
  • One paired Watch per iPhone. Only IPAs that contain both the iPhone host and Watch/*.app are supported.
  • Auth error -23782 during sign-in means the selected anisette server reports an old macOS version. Choose a server that reports 13.x.
  • The signing dependency apple-codesign-quick does not declare a licence; see docs/LICENSE_REVIEW.md.

WatchBridge is an independent community derivative of iLoader and is not affiliated with Apple or with any upstream project.

WatchBridge 0.1.0

Choose a tag to compare

@AdminZachary AdminZachary released this 13 Nov 09:56

WatchBridge 0.1.0

WatchBridge prepares Apple Watch developer mode and installs Watch Companion apps from a signed IPA — the half of iOS sideloading that normally needs Xcode on a Mac. 0.1.0 is the first release that ships both platforms from the same source tree.

Highlights

  • Windows and macOS from one codebase. Native Apple Silicon and Intel builds, packaged as disk images, with no Xcode installation required to run the app.
  • Watch developer mode preparation. The app pairs with the Watch through the paired iPhone and requests the Developer Mode switch to appear. Only the reveal action is sent; enabling, restarting and confirming stay on the Watch.
  • Companion installation. The IPA is checked for an embedded Watch/*.app before anything is signed, then re-signed, installed on the iPhone and finally on the Watch over the RSD tunnel.
  • Wi-Fi installs and renewal. Set up Wi-Fi once over USB, then install and renew without a cable.
  • Automatic renewal. Re-signs before the seven-day expiry, with tray controls and optional start at login.
  • Localized interface. 28 languages are bundled; the nine most used are fully translated.
  • Log export. The log viewer writes everything to a single file for bug reports.

Downloads

Asset Platform Contents
WatchBridge-0.1.0-arm64.dmg macOS on Apple Silicon WatchBridge.app, ad-hoc signed, licence inventory inside the bundle
WatchBridge-0.1.0-x86_64.dmg macOS on Intel Same, native x86_64 build
watchbridge-windows.zip Windows 10 / 11 (x64) WatchBridge.exe, BUILD.json, SHA256SUMS.txt, LICENSES.zip

Each build records its source commit, lockfile hashes, toolchain versions and the executable checksum, so a download can be traced back to the tree it came from.

Requirements

Windows — Windows 10 22H2 or Windows 11 on x64, Apple Mobile Device Service (iTunes or the Apple Devices app) and the WebView2 runtime.

macOS — macOS 11 or newer on Apple Silicon or Intel. The system usbmuxd is used directly, so there is no driver to install.

Both platforms need an iPhone already paired with the target Watch, and a cable for the preparation step.

Installing on macOS

The bundle is ad-hoc signed but not notarized. The first launch is blocked by Gatekeeper: allow it once under System Settings → Privacy & Security → Open Anyway, then open the app again. This is expected for an unsigned distribution; a Developer ID certificate and notarization would remove the prompt.

Known limitations

  • The Windows executable is unsigned, so SmartScreen warns on first run.
  • The macOS bundle is not notarized, as described above.
  • Automatic renewal's "start at login" option is Windows-only; on macOS it reports that it is unavailable.
  • One paired Watch per iPhone. Only IPAs that contain both the iPhone host and Watch/*.app are supported; independent Watch-only packages are not.
  • Auth error -23782 during sign-in means the selected anisette server reports an old macOS version. Choose a server that reports 13.x.
  • The signing dependency apple-codesign-quick does not declare a licence; see docs/LICENSE_REVIEW.md.

Verification

Both platforms build in CI, which also runs the iloader and isideload unit tests. The macOS build has been validated on a physical Apple Silicon Mac; the Windows build has been validated end to end on physical iPhone and Apple Watch hardware.

WatchBridge is an independent community derivative of iLoader and is not affiliated with Apple or with any upstream project.