Case study: Production of rubber tiles
The different steps of the production of rubber tiles, presented in (this video) are described.
1. Pourring of the granulates into a mixing apparatus
2. Pourring of the binder with the granulates
3. After a mixing time, pouring of the mixture into a mould
4. Equalization of the surface
5. A wooden plate, with the size of the rubber tile, is placed above the mould
6. The system is put under pressure in an hydraulic press, to densify the tile and enhance its mechanical resistance
7. After a setting time, the tile is removed from the mould
This work is licensed under a Creative Commons Attribution 4.0 International License.
You are free to:
- Share — copy and redistribute the material in any medium or format ;
- Adapt — remix, transform, and build upon the material for any purpose, even commercially.
Under the following terms:
- Attribution — You must give appropriate credit (click on 'Edit' then 'Page History' to see the authors), provide a link to the license, and indicate if changes were made. You may do so in any reasonable manner, but not in any way that suggests the licensor endorses you or your use.