Repository navigation
HEARASIDE 1.0.2
HEARASIDE 1.0.2
Auto-sync fix · 10 Oct 2026 · Windows 10 / 11 · VST3 (+ VST2) · OBS Studio 32+
Installer:
HEARASIDE-Setup-1.0.2.exeis attached once it is built on Windows. Until then, use 1.0.1.
ตัวติดตั้ง: ไฟล์HEARASIDE-Setup-1.0.2.exeจะแนบในหน้านี้หลัง build บน Windows เสร็จ ระหว่างนี้ใช้ 1.0.1 ไปก่อน
English
1.0.2 makes Auto-sync vocal work in real projects. In 1.0.1 it often stopped with “Measurements disagreed” even when you did everything right. Everything else is the same as 1.0.1.
Install / update
- Close your DAW and OBS.
- Run
HEARASIDE-Setup-1.0.2.exe. It updates 1.0.0 or 1.0.1 in place. - Open your DAW again. Your projects and delays are kept.
- Run Auto-sync vocal again if it failed before.
Fixed
-
Auto-sync vocal kept failing with “Measurements disagreed” (or set 0 ms).
Auto sync measures in two steps:- Only the music plays, to learn when it reaches the master.
- Only your mic, which hears the music faintly from the headphones held to it.
During step 2 HEARASIDE mutes every track that has HEARASIDE Track. But the music can still reach the master another way: a reverb or FX return, a group or bus, or a channel without HEARASIDE Track. That leftover copy is much louder than the faint sound in the mic, so it competed with it. The readings flipped between the real delay and 0 ms (“Measurements disagreed”), or all settled on 0 ms and nothing was fixed.
Auto sync now removes that leftover copy before it looks for your mic. Step 1 already tells it exactly when the copy arrives. In tests it finds the right delay even when the leftover music is as loud as -6 dB.
-
The music step of auto sync wandered when the music reached the master twice.
If the program also plays straight to your audio interface and comes back into the DAW (a loopback input, a second channel), the master gets a second copy of the music. The short readings of the music step then pulled apart (a user’s log: 210, 195, 213, 130, 211 ms), so the step failed or only just passed. The music step now uses the same longer, sharper window as the mic step. In tests it stays within 1 ms even when the second copy is as loud as the first. Measuring now takes about 10 seconds instead of 7. -
Auto-sync with “Hear viewers’ mix” switched on measured nothing.
The stream is silenced while measuring. With Hear viewers’ mix on, your headphones were silenced too, so the mic heard nothing. While measuring, your headphones now always play your own mix. -
No sound on phones from the listen link (and the friends’ page).
The page started its audio only after loading its sound engine, which phones no longer count as part of your tap, so the sound stayed off. On iPhone, web audio was also silenced by the ringer switch, and a call or the lock screen stopped it for good. The sound now starts inside the tap, plays even with the ringer switch on silent, and comes back when you return to the page or tap it. -
A new random listen link every time you share.
Without permanent links (a Vercel site), switching Listen link on now makes a new random link each time. A link sent for an earlier stream stops working. Friends who are connected stay connected. Permanent links stay the same, as before. -
Plug-ins failed Steinberg’s VST3 conformance test.
HEARASIDE Hub, Track and App Audio reported one preset with an empty name, which the official VST3 validator rejects. Strict hosts such as Cubase can hide or block plug-ins like that. The preset is now called Default. Hub and Track pass all 47 standard and 537 extended validator tests. -
Auto-sync log shows how App Audio is being read.
When the music comes from App Audio,autosync.lognow also records how far App Audio was ahead of the Hub and how often the Hub had to jump to catch up. In Studio One, App Audio on a monitored input channel runs separately from the master, which can make the music step wander. -
Auto-sync screen: while measuring, Cancel covered the line Viewers hear nothing until this finishes. The button now sits under it.
If Cubase doesn’t show HEARASIDE
- Open Studio › VST Plug-in Manager and look under Blocklist (bottom). If HEARASIDE is listed there, select it and click Reactivate.
- Click Rescan (the circular arrows). The plug-ins are in
C:\Program Files\Common Files\VST3\HEARASIDE. - Look under the Tools category (Hub, Track and App Audio are filed as Fx › Tools), or search for “HEARASIDE”.
If it still doesn’t work
The red message names the reason, and the If it doesn’t work box next to the steps says what to do. For a closer look, open Documents\HEARASIDE\autosync.log: every run writes the five readings of each step and their scores. Please attach it when you report a problem.
- Readings that are all
--: the mic doesn’t hear the music. Turn the headphones up, hold them right against the mic, and bypass a noise gate or suppressor on the mic track while measuring. - Readings far apart: something else is talking or playing. Stay quiet and try again.
How this was checked
- New tests for auto sync use music with a steady beat, which repeats every beat and could fool a measurement:
- a mic that hears only a quiet, treble-heavy bleed with room noise, at 12, 40 and 95 ms round trips
- room echo
- leftover music in the master from -50 dB to -6 dB
- a mic that hears nothing: it must give no number rather than a wrong one
- All 12 automatic test suites pass, and Hub and Track pass Steinberg’s VST3 validator (47 standard, 537 extended tests).
- Not tested yet with real DAWs on Windows. Please report anything odd.
ภาษาไทย
1.0.2 ทำให้ ซิงก์เสียงร้องอัตโนมัติ ใช้ได้จริงในโปรเจกต์ทั่วไป ใน 1.0.1 มักวัดไม่สำเร็จและขึ้น “วัดหลายรอบแล้วได้ค่าไม่ตรงกัน” ทั้งที่ทำทุกขั้นตอนถูกแล้ว ส่วนอื่นเหมือน 1.0.1 ทุกอย่าง
ติดตั้ง / อัปเดต
- ปิด DAW และ OBS
- รัน
HEARASIDE-Setup-1.0.2.exeระบบจะอัปเดตทับ 1.0.0 หรือ 1.0.1 ให้เอง - เปิด DAW ใหม่ โปรเจกต์และค่าหน่วงเดิมยังอยู่ครบ
- ถ้าเคยวัดไม่ผ่าน ให้กด ซิงก์เสียงร้องอัตโนมัติ ใหม่อีกครั้ง
แก้แล้ว
-
ซิงก์เสียงร้องอัตโนมัติวัดไม่สำเร็จ ขึ้น “วัดหลายรอบแล้วได้ค่าไม่ตรงกัน” (หรือตั้งเป็น 0 ms)
การซิงก์อัตโนมัติวัด 2 ขั้น:- เล่นเพลงอย่างเดียว เพื่อรู้ว่าเพลงไปถึง master เมื่อไร
- ฟังไมค์อย่างเดียว ซึ่งได้ยินเพลงเบาๆ จากหูฟังที่จ่อไว้
ระหว่างขั้นที่ 2 HEARASIDE ปิดเสียงทุกแทร็กที่มี HEARASIDE Track แต่เพลงยังไปถึง master ทางอื่นได้ เช่น ช่อง reverb/FX return, group/bus หรือช่องที่ไม่มี HEARASIDE Track เพลงที่หลุดมานี้ดังกว่าเสียงในไมค์มาก จึงแย่งผลวัด ค่าเลยสลับไปมาระหว่างค่าจริงกับ 0 ms (“วัดหลายรอบแล้วได้ค่าไม่ตรงกัน”) หรือได้ 0 ms ทุกรอบและไม่ได้แก้อะไรเลย
ตอนนี้ระบบหักเพลงที่หลุดมาออกก่อน แล้วค่อยหาเสียงในไมค์ ขั้นที่ 1 บอกอยู่แล้วว่าเพลงนั้นมาถึงตอนไหน ในเทสต์วัดได้ถูกแม้เพลงที่หลุดมาดังถึง -6 dB
-
ขั้นวัดเพลงของซิงก์อัตโนมัติแกว่งเมื่อเพลงไปถึง master สองทาง
ถ้าโปรแกรมเล่นเสียงออกการ์ดเสียงตรงๆ ด้วย แล้ววนกลับเข้า DAW (ช่อง loopback หรือช่องอื่น) master จะได้เพลงซ้ำอีกชุด ค่าที่วัดได้ในขั้นเพลงจึงกระจาย (log จากผู้ใช้: 210, 195, 213, 130, 211 ms) ทำให้วัดไม่ผ่าน หรือผ่านแบบเฉียดฉิว ตอนนี้ขั้นเพลงใช้หน้าต่างวัดที่ยาวและคมแบบเดียวกับขั้นไมค์ ในเทสต์ค่าที่วัดได้ห่างกันไม่เกิน 1 ms แม้เพลงชุดที่สองดังเท่าชุดแรก การวัดใช้เวลาราว 10 วินาทีแทน 7 -
ซิงก์อัตโนมัติตอนเปิด “ฟังแบบคนดู” อยู่วัดอะไรไม่ได้เลย
ระหว่างวัดสตรีมถูกปิดเสียง ถ้าเปิด ฟังแบบคนดู อยู่ หูฟังก็เงียบตามไปด้วย ไมค์จึงไม่ได้ยินอะไร ตอนนี้ระหว่างวัดหูฟังจะเล่นมิกซ์ของคุณเองเสมอ -
เปิดลิงก์ฟังสดบนมือถือแล้วไม่มีเสียง (หน้าของเพื่อนก็เช่นกัน)
หน้าเว็บเริ่มเล่นเสียงหลังโหลดระบบเสียงเสร็จ ซึ่งมือถือไม่นับว่าเป็นการแตะของคุณแล้ว เสียงจึงไม่เริ่ม บน iPhone เสียงจากเว็บยังถูกปิดเมื่อเปิดโหมดเงียบ และถ้ามีสายเข้าหรือล็อกจอ เสียงจะหยุดไปเลย ตอนนี้เสียงเริ่มทันทีที่แตะ เล่นได้แม้เปิดโหมดเงียบ และกลับมาเองเมื่อกลับเข้าหน้านั้นหรือแตะจอ -
ลิงก์ฟังสดสุ่มใหม่ทุกครั้งที่เปิดแชร์
ถ้าไม่ได้ตั้งลิงก์ถาวร (เว็บ Vercel) ทุกครั้งที่เปิด ลิงก์ฟังสด จะได้ลิงก์สุ่มใหม่ ลิงก์ที่เคยส่งไปในไลฟ์ก่อนจะใช้ไม่ได้ เพื่อนที่เชื่อมต่ออยู่ไม่หลุด ส่วนลิงก์ถาวรยังคงเดิมเหมือนเดิม -
ปลั๊กอินไม่ผ่านการทดสอบมาตรฐาน VST3 ของ Steinberg
HEARASIDE Hub, Track และ App Audio รายงานว่ามี preset 1 ตัวแต่ไม่มีชื่อ ซึ่ง validator ทางการของ VST3 ถือว่าผิด host ที่เข้มงวดอย่าง Cubase อาจซ่อนหรือบล็อกปลั๊กอินแบบนี้ ตอนนี้ preset ชื่อ Default แล้ว Hub และ Track ผ่านการทดสอบครบ ทั้ง 47 ข้อแบบมาตรฐานและ 537 ข้อแบบละเอียด -
ไฟล์ autosync.log บอกการอ่าน App Audio ด้วย
ถ้าเพลงมาจาก App Audio ไฟล์autosync.logจะบันทึกเพิ่มว่า App Audio เขียนล่วงหน้า Hub เท่าไร และ Hub ต้องกระโดดตามกี่ครั้ง ใน Studio One ถ้าวาง App Audio บนช่อง input ที่เปิด monitor ไว้ ช่องนั้นจะทำงานแยกจาก master ซึ่งอาจทำให้ผลวัดขั้นเพลงแกว่ง -
หน้าซิงก์อัตโนมัติ: ระหว่างวัด ปุ่ม ยกเลิก ทับบรรทัด คนดูจะไม่ได้ยินอะไรจนกว่าจะวัดเสร็จ ตอนนี้ปุ่มอยู่ใต้บรรทัดนั้นแล้ว
ถ้า Cubase ไม่เห็น HEARASIDE
- เปิด Studio › VST Plug-in Manager แล้วดูส่วน Blocklist ด้านล่าง ถ้ามี HEARASIDE อยู่ ให้เลือกแล้วกด Reactivate
- กด Rescan (ลูกศรวน) ปลั๊กอินอยู่ที่
C:\Program Files\Common Files\VST3\HEARASIDE - หาในหมวด Tools (Hub, Track และ App Audio อยู่ในหมวด Fx › Tools) หรือพิมพ์ค้นหา “HEARASIDE”
ถ้ายังวัดไม่ผ่าน
ข้อความสีแดงจะบอกสาเหตุ และกล่อง ถ้าไม่ได้ผล ข้างขั้นตอนบอกวิธีแก้ ถ้าอยากดูละเอียด ให้เปิดไฟล์ Documents\HEARASIDE\autosync.log ทุกครั้งที่วัดจะบันทึกค่าที่อ่านได้ 5 ครั้งของแต่ละขั้นพร้อมคะแนน ถ้าจะแจ้งปัญหา แนบไฟล์นี้มาด้วย
- ค่าที่อ่านได้เป็น
--ทั้งหมด: ไมค์ไม่ได้ยินเพลง ให้เพิ่มเสียงหูฟัง จ่อหูฟังชิดไมค์ และปิด noise gate หรือตัวลดเสียงรบกวนบนแทร็กไมค์ชั่วคราวระหว่างวัด - ค่าห่างกันมาก: มีเสียงพูดหรือเสียงอื่นแทรก เงียบไว้แล้วลองใหม่
ตรวจสอบอย่างไร
- เทสต์ใหม่ของซิงก์อัตโนมัติใช้เพลงที่มีจังหวะกลองซ้ำๆ ซึ่งหลอกการวัดได้ง่าย:
- ไมค์ได้ยินแค่เสียงแหลมเบาๆ จากหูฟังปนเสียงห้อง ที่ความหน่วงไป-กลับ 12, 40 และ 95 ms
- เสียงก้องห้อง
- เพลงหลุดไปถึง master ตั้งแต่ -50 dB ถึง -6 dB
- ไมค์ไม่ได้ยินอะไรเลย: ต้องไม่ให้ตัวเลขผิดๆ ออกมา
- เทสต์อัตโนมัติผ่านครบ 12 ชุด และ Hub กับ Track ผ่าน VST3 validator ของ Steinberg (47 ข้อแบบมาตรฐาน, 537 ข้อแบบละเอียด)
- ยังไม่ได้ทดสอบกับ DAW จริงบน Windows ถ้าเจออะไรแปลกๆ แจ้งได้เลย