Repository navigation
Releases
AI_RADIO 0.9.148 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.148 - AI_C2 fixes from a live test at Nellis, and a new licence
Update on 0.9.147. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.148:
- AI_C2 tactical net: the OSD voice prompt names the controller without the net, for example "Goliath, Hornet 1-1", not "Goliath, TACTICAL, Hornet 1-1".
- AI_C2 tactical net: fight calls that use words such as defending, spike, missile, SAM or threat are no longer refused, and "Hornet 1-1, defending east" is Defensive with a direction. A call the controller does not understand gets a spoken "say again" instead of silence.
- AI_C2: after Out or Defensive on a group you were assigned, Committing asks the controller to recommit you on that group. Out and Defensive reset on their own after 60 seconds: "Reset. Standby targeting." A group you were committed on stays hostile in target, threat and bogey dope calls.
- AI_C2: calls that reach AI_C2 through the AI command layer are no longer all refused.
- Licence: from this version AI_RADIO is proprietary software, licensed under the AI_RADIO Software Licence and Community Beta Terms installed with it, which replace the MIT licence. Copies of versions before 0.9.148 keep the MIT licence they shipped with.
AI_RADIO 0.9.147 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.147 - carrier comms on with a Carrier tab, Center works like the other controllers, F-4E and A-10C crew chief fixes, the OSD follows the cockpit radio selector
Update on 0.9.146. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.147:
- Carrier operations are on. The Mission tab has a new Carrier sub-tab between AI_ATC and AI_C2. Load a mission and it lists the carriers and amphibious ships in it with their Marshal, Approach, Tower and Departure frequencies, TACAN, ICLS and Link 4. It shows frequency clashes and Optimal layout moves them. You can switch off a ship or a single seat, the seats go into the radio channel plan, and the tab can add a kneeboard page to the mission. The tab's switch is the only way to turn carrier operations off.
- Carrier radio: the carrier and amphibious-ship controllers rotate through the voice provider's naval voices, also with AI Radio managed. A short acknowledgement or a readback to the carrier no longer gets an answer from another controller, and on a carrier's frequencies your modex addresses you while you hold.
- Center works like the other controllers: subtitles show and the voice plays after a menu command, and a hand-off to a field names the UHF frequency first. At Marianas, Guam Center keeps you until you are inbound to Andersen, unless you are working with Hammerhead.
- AI_Wingman: the Wingman sub-tab of the Mission tab has an Intraflight frequency field. Your wingman spawns and talks on that frequency. Left blank, AI_Wingman picks the frequency for your aircraft as before.
- A-10C crew chief: in the controls and trim checks the chief waits until each control has moved far enough, pauses about a second, then asks for the one you missed, for example "Cycle the Rudder?". The trim check has its cockpit highlight box.
- F-4E crew chief: highlight boxes for the engine masters, the ignition switches and, after a Load Start Cartridges order, the engine start switch. The COMM card reads Intercom while you talk to the chief, and a radio that is switched off reads Off. The OSD crew chief page has an Other orders folder, and the chief's orders are recognised more reliably.
- OSD: the voice-command menu follows the cockpit radio selector, for example the AH-64D's radio rocker. The radio pill on the wheel is gone.
- OSD callsign: in a helicopter the voice-command prompt shows your mission callsign, for example Apache 1-1, not the tail number.
- Controls: a radio Push To Talk can be learned on a stick or throttle switch that a copied aircraft profile had given to a radio this aircraft does not have.
- Hosting: the network light turns green once your port is confirmed open and another player has joined.
- Live Traffic: AI traffic spawns only inside the map's own area, so on the Persian Gulf no more ships appear past the edge of the map. The check for missing traffic runs every 10 seconds instead of every 2, a spawn DCS refuses is retried less and less often, and AI_JTAC no longer spends time on Live Traffic units.
- Voice cache: a leftover lock file no longer keeps the voice cache rescanning every few seconds.
- Radio server: connections to the built-in radio server are better protected against misuse, and its log says how far a player connection got when it stops.
- Behind the scenes: AI_ATC, AI_C2, AI_JTAC, AI_Wingman and the radio programs carry fewer internal names, and every build is checked for secrets left in the source.
AI_RADIO 0.9.146 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.146 - less server CPU with AI_RADIO connected, profiles hold key bindings only, OSD keys work without a restart, AI_JTAC in Instant Action missions
Update on 0.9.145. Everything in this update has been tested offline, and the CPU changes were also measured on a test server; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.146:
- Server CPU: with AI_RADIO connected, DCS does much less work while a server sits idle. AI_ATC, AI_C2 and AI_JTAC set up a controller's radio only when it is first needed and rest radios nobody is using. The JTAC looks at the battlefield every 5 seconds while no pilot is in a slot, and every second again as soon as one is. AI traffic starts no new flights until a pilot is in a slot. Background ATIS pauses while no pilot and no outside radio can hear it, and starts again the moment someone joins. The hooks write fewer files every frame.
- The background hiss on controller frequencies is switched off.
- Profiles now hold only key bindings. Every other setting, such as voices, microphone, language and traffic, is the same in every profile. When you update, a switch that was on in any of your profiles stays on.
- New users start with Live Traffic off.
- The OSD and Transponder IDENT keys work as soon as they are bound, also without a Push To Talk key or microphone, with no restart.
- AI_JTAC now works in missions started from the Instant Action and Training menus. Before, AI_RADIO showed "AI_JTAC desktop needs attention".
- Mission tab: a mission whose triggers the Mission Editor renumbered on a re-save loads again, removing a system removes its files cleanly, and the radio channel plan handles more missions correctly.
- Dedicated servers: the server no longer stops when its event journal is busy for a moment.
- Carrier operations stay built in and switched off.
AI_RADIO 0.9.145 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.145 - an F-4E crew chief page in the cockpit menu, one key in several aircraft profiles, dedicated servers keep their chosen speech and voice settings, Edge voices withdrawn
Update on 0.9.144. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.145:
- F-4E crew chief: the Intercom tab of the in-cockpit menu now has a crew chief page for the F-4E front seat. The order the ground procedure expects next sits at the top, followed by Next step, Go back and Cancel. Orders the chief takes only on the intercom appear only while the chief is on the intercom.
- Bindings page: a key bound for one aircraft can now be bound again for another aircraft. Learning or deleting a key with an aircraft picked gives that aircraft its own profile. Inside one profile, a key still does only one job.
- Dedicated servers: the radio server uses the speech recognition, Smart Matching and voice settings chosen for that server, also after a retune, and keeps its selected traffic feeds when a feed's credentials are missing.
- Dedicated servers on Wine: AI_RADIO accepts the speech recognition language again. On some Wine setups it rejected every language.
- Voices: Microsoft Edge voices are no longer offered, because Microsoft's service now refuses AI_RADIO's requests. A setup that already uses Edge keeps its setting. When Edge refuses a line, AI_RADIO now gives up quickly, uses the fallback voice if one is set, and leaves Edge alone for a while before trying again.
AI_RADIO 0.9.144 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.144 - the Bindings page shows only your aircraft's keys, C2 playtime, fuel colours and Meld, multiplayer C2 answers the jet that called, AI wingman shot calls name the group, no JTAC readback warning, crew chief and hook repair fixes
Update on 0.9.142. 0.9.143 was never published, so this update also brings everything listed under 0.9.143 below. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.144:
- Bindings page: picking an aircraft shows only the keys that aircraft uses, at once. Every aircraft gets the intercom Push To Talk and Transponder IDENT keys. Aircraft whose cockpit picks the radio, such as the AH-64D, get one Push To Talk key; the F/A-18C gets a key for COMM 1 and COMM 2. The COMM 1 and COMM 2 channel up and down keys appear only for Flaming Cliffs aircraft. "All aircraft" still lists every key.
- AI_C2: C2 asks fighters for their fuel state and strike aircraft for their playtime. You can answer with your fuel, your playtime in minutes ("playtime 20") or a fuel colour (green, yellow or red). New Meld call, under Tactical or by voice ("meld"): you have C2's picture, and C2 stops repeating target calls.
- Multiplayer AI_C2: each jet in a flight has its own seat, so a wingman joining no longer resets the lead's C2 session. C2 answers bogey dope, shot, fuel and spike calls to the jet that called. C2 counts a shot only when you call it on the radio; after a launch the OSD offers your Fox call, then defensive options. Every C2 action stays on the F10 menu, with no more than ten items on one level, and every one can also be said.
- A mission can now send fixed-wing and helicopter check-ins to different ranges. Missions without the new settings behave as before.
- AI_Wingman: a wingman's Fox 1 or Fox 3 on the group C2 assigned names that group ("Fox 3, north group"). A shot at anything else adds its altitude and aspect ("Fox 3, 20 thousand, flank northwest"). Fox 2 stays short.
- AI_JTAC: the "Check your readback" warning no longer appears for JTAC readbacks. Speech recognition is not accurate enough to judge them. ATC readback help is unchanged.
- F-16C crew chief: a lone "clear" or "ready", cut short by an open mic, no longer counts as "clear off", so it no longer ends a running check. The F-4E crew chief understands more misheard calls.
- Automatic hook repair now also puts back the AI_ATC export reader, so the repair no longer fails on every start.
- Whisper: a speech listener that is busy when AI_RADIO checks it is tried again, instead of being reported as incompatible.
- Home and Server tabs: the radio cards on Home line up, the Server tab's port boxes take a typed number straight away, status captions fit, and fewer hover pop-ups appear.
- Carrier operations are built in but switched off in this update; nothing changes in flight.
AI_RADIO 0.9.143 - your aircraft's radio keys on the Bindings page, push to talk in the VNAO T-45 and Civil Aircraft Mod, dedicated servers on Wine, several DCS servers on one PC, Nellis RTB to your home field, C2 answers each player, the Massun92 crew chief salutes
Update on 0.9.142. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.143:
- The Bindings page shows the radio keys of each aircraft profile, and you can create an aircraft profile there.
- Push to talk on the selected radio now works in two community mods: the VNAO T-45 and the Civil Aircraft Mod.
- Dedicated servers on Wine: AI_RADIO knows it runs on Wine. Installing, removing and checking the hooks no longer needs PowerShell, the Nellis C2 and JTAC step and the Windows voices work there, and the radio server starts even when it cannot make its certificate. Connect now logs why no agency is tuned.
- Several DCS servers on one PC: the Server tab lists each DCS server with its ports and folders, and the support report has one row per server.
- Nellis NATCF and BlackJack: RTB sends you to the airfield you name, or else to your home field. A gate or fix you name only says where you leave the range.
- Multiplayer C2 answers each player by the number they call themselves, not by their jet.
- Massun92 crew chief: when the mod is installed, the crew chief is the mod's figure and salutes when you taxi. It is on by itself in single player; a server switches it on with crewChiefMod=on in AIRadioAtc.conf. F-4E slots get no crew chief.
AI_RADIO 0.9.142 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.142 - push to talk on the radio you selected in the cockpit, the OSD names that radio, a profile per aircraft, C2 menus in multiplayer, AI voices wait for a clear frequency on SRS servers, the controller tells you who to call, two DCS servers on one PC, automatic support uploads on
Update on 0.9.141. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.142:
- Radio push to talk: a new "Push To Talk - PTT" key talks on the radio selected in the cockpit. "Select Next Radio", "Select Previous Radio", "Intercom Select" and "Radio 1" to "Radio 10" keys pick a radio. The keys use SRS's names.
- The OSD names the radio that key will use by its device name, such as AN/ARC-210. It does this for the intercom and in the wheel style too.
- AI_RADIO reads the selected radio from the cockpit in more aircraft: the AH-64D (each seat reads its own EUFD), CH-47F, Mi-8, OH-58D and C-101. It knows the radios of the C-130J-30, F-4E, MB-339, F4U-1D and I-16, and the transmit keys of many more modules, Flaming Cliffs included. The F-4E's radios are read from its cockpit.
- A profile for each aircraft, which switches by itself when you change aircraft. On its first start, 0.9.142 carries every 0.9.141 setting over after saving a backup,
settings.pre-0.9.142.json. - Multiplayer: a large AI_Wingman menu on one radio no longer empties the C2 menu on another radio. The wheel shows no advisory text.
- On a server that uses SRS, C2 and wingman voices wait for a clear frequency, for up to 15 seconds, before they talk, instead of talking over pilots.
- Calling the wrong controller: if another controller at the same field handles your request, you hear "contact on ". Departure sends return to base, inbound and landing calls to Approach.
- Tanker: once you ask a tanker for a rejoin, tanker calls that do not name a tanker go to that tanker.
- On a server that does not run AI_RADIO, AI_RADIO no longer sends a hidden chat message every 3 seconds. One user was kicked for it.
- Two DCS servers on one PC: AI_RADIO serves the server you picked, on its own ports. If the other server holds this profile's port, the Server tab says "Another DCS on this PC is using this profile's AI_RADIO port." and the light stays amber. A typed AI_Radio Network port from 34320 to 34399 now falls back to Automatic.
- Dedicated servers on Wine: the radio server starts again when it fails at startup, and a hook install that did not finish is reported as failed instead of "Installed".
- A failed update install is now logged, and Diagnostics no longer reports the updater as ready after one.
- Automatic support uploads are now on by default. Existing installs switch them on once, at this update. To turn them off, untick "Automatic support uploads" on the Diagnostics page; AI_RADIO keeps that choice.
- A warning from Piper no longer fails a voice line that was spoken correctly. SRS display names are masked in server speech diagnostics.
AI_RADIO 0.9.141 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.141 - speech sets itself up for your PC, Whisper on GeForce RTX 50-series cards, the A-10C crew chief pulls the chocks, crew chief and tanker fixes, support export always completes, AI_Wingman holds at about 280 knots for the JTAC
Update on 0.9.140. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.141:
- Speech sets itself up for your PC. While DCS runs on the same PC, Whisper and Piper run below the game's priority, and Piper uses 2 processor threads instead of all of them. On a processor whose two dies have different cache sizes, such as a Ryzen 9 9950X3D, speech runs on the die without the extra cache and leaves that cache to DCS. A server with no cockpit keeps normal priority and may use every core.
- The Speech page has a new "Speech CPU use" card: a switch for this automatic set-up (on by default), how many threads Piper uses, and a line on what AI_RADIO read about your processor. The Whisper card has a CPU threads box, greyed out while Whisper runs on the GPU. Both start on Automatic.
- Whisper on the GPU now works on GeForce RTX 50-series cards. They need a newer CUDA library (cuBLAS 12.9), which the Whisper GPU download now carries; before, Whisper quietly fell back to the CPU on them. If you use the GPU, AI_RADIO downloads the updated libraries once. If a card still refuses a model, Whisper now tries it again on the GPU before it falls back to the CPU.
- AI_JTAC: asking for the echo point or the IP again, such as "say again the echo point" or "repeat the IP", now gets it repeated while the JTAC waits for Established. "Established at the echo point" still reports Established.
- A-10C crew chief: when he says "Have a safe flight, sir", he pulls the wheel chocks.
- Crew chief: when his AI_RADIO voice does not reach the air, you hear his reply in the DCS voice instead of nothing (unless Mute is ticked).
- After a mission reload, crew chief and tanker replies are spoken again; before, every line was refused after a reload.
- Tanker: with two tankers up, "Ready pre-contact" goes to the tanker you are working. "Hit the tank" and "vector to the tank" work as "tanker" does.
- Support export always completes: anything the privacy check refuses is masked or left out, instead of stopping the whole export. A bundle too big to upload leaves out its largest files until it fits, so it still uploads. Each bundle lists what was masked or left out.
- AI_Wingman: a wingman working a JTAC holds at about 280 knots indicated in a wide orbit, instead of racing round at close to Mach 1, so the JTAC work carries on past the check-in. Two, tasked to engage, starts its run from the run-in point instead of never reaching the IP, and says "coming off dry" once when a pass ends without a weapon.
AI_RADIO 0.9.140 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.140 - AI_JTAC fixes, Have Quick, ATC on FM and HF, multiplayer on a moved radio server port, pilot words in support bundles
Update on 0.9.139. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.140:
- AI_JTAC: when the JTAC cannot find a target, it searches again. If the last search fails as well, the flight hears "No further tasking available." A check-out restarts the search.
- AI_JTAC: a target that dies before your IN call ends the attack at once, and an abort keeps the target the flight was working while it is still valid. An IN on a lased nine-line gets "Laser on." and the spot first, once, before cleared hot. A solo flight's OFF Target keeps the spot on while its bomb falls.
- AI_JTAC authentication is off until further notice.
- Calling the JTAC by name and number ("Axeman 3-1, Hawg 1-2, in") or after "this is" now keeps your own callsign in the reply.
- Crew chief: "Crew chief, rearm and refuel" now works on a radio press, as "Chief, rearm and refuel" already did.
- A-10C II crew chief: he reads the stick left and right the right way round, and calls the speed brakes "Full." and "Partial." at the cockpit's real positions.
- Have Quick: when the ARC-164 UHF radio in the A-10C, A-10C II or F-5E is switched to Have Quick, controllers do not answer on it, as in SRS. Your crew chief still answers.
- AI_ATC: a controller answers on an FM or HF radio when you have set that controller to an FM or HF frequency.
- Multiplayer: when the hosting PC's radio server is on a port other than 5004, pilots on 0.9.140 find it there. The Server tab shows the port as green only after it has been tested. Hosting PCs get one Windows approval for the firewall rule, asked only while DCS is closed.
- Support bundles now include what the pilot said, with names and addresses masked.
AI_RADIO 0.9.139 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.139 - push-to-talk on every cockpit radio, AI_JTAC clears each aircraft in a flight, A-10C II crew chief in a real crew chief's words, AI_RADIO's radio server stays off SRS's port
Update on 0.9.138. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.139:
- Push-to-talk works on every radio in the cockpit, not only the first two: there are PTT bindings for Comm 3 to Comm 6, and the cockpit's radio selector reaches radio 10. With more than two radios, the OSD wheel's hub shows "‹ PREV" and "NEXT ›" to step through them.
- AI_JTAC with two or more pilots in one flight: the JTAC menu has Flight Members, with one menu per aircraft named by its callsign and its own IN and OFF Target, so the JTAC clears each aircraft on its own, such as "Hornet 1-2 Cleared Hot.", Two included while Lead is hot. By voice and on the OSD wheel you are offered only your own aircraft. A flight with one pilot keeps the same menus as before.
- AI_JTAC: a show of force checks out only the flight that flew it; the JTAC keeps working any other pilot's flight.
- A-10C II crew chief: he now uses a former A-10C crew chief's words for the control checks, such as "Cycling.", "Partial.", "Full.", "Pumping.", "Trims good." and "Heat's good.", and he calls each check as he sees it.
- AI_RADIO's own radio server no longer takes a port that an SRS server on this PC is set to or uses: it moves to the next free one (5014, 5024 and so on) and says so in the log. A dedicated server keeps 5004. The port can also be set by hand with
--radio-network-port,AIRADIO_NETWORK_PORTorradioNetworkPortin dedicated-server-settings.json.
AI_RADIO 0.9.138 Unsigned Compatibility Beta
Warning
Closed-beta compatibility update. These binaries and installers are unsigned,
the release-trust policy is audit-only, and Windows may identify the publisher
as unknown. This is not a signed production release.
AI_RADIO 0.9.138 - Windows speech recognition as a full alternative to Whisper, AI_JTAC with several pilots, helicopter phrasing, server fixes, AI_RADIO's lines in their own log, Hornet crew chief and tanker on the keyed radio
Update on 0.9.137. Everything in this update has been tested offline only; none of it has been flown by a pilot yet. Close DCS before installing, then start it again: hooks load only when DCS starts.
New in 0.9.138:
- Windows speech recognition is now a full alternative to local Whisper: the crew chief, the agent layer and readbacks are heard on Windows speech too. Windows speech hears English only. The hot mic line now reads "Hot mic needs local Whisper or Windows speech."
- AI_JTAC with several pilots: when two humans fly in one flight and the lead leaves, the other keeps the flight (check-in, brief, block, target, laser) with nothing said again. With two player flights on station, the JTAC works one at a time from IN to its BDA; a late flight hears "hold your check-in, attack in progress", then "push" when the run ends.
- AI_JTAC: an impact line held for a clear is always said before the clear, never dropped.
- AI_Wingman: rearming after the start has gone out respawns the wingman hot. The cover stays up coming off the target and leads the hold after an attack.
- Helicopters: Tower understands a helicopter's plain calls, such as "request landing", "request lift from parking", "request hover departure from parking" and "request hover check".
- Helicopters: the "Report 3 miles" prompt no longer says "gear down". Jets' landing reports are unchanged.
- Nellis: asking for the Jolly pad is no longer taken as a taxi to the runway or to parking.
- Servers: while DCS server is running, an update installs only when you press Update. If a mission is running when you press it, it installs once DCS server closes.
- Servers: the AI voices come back by themselves when AI_RADIO restarts while DCS server is running.
- Servers: on a PC that runs only DCS server, the desktop DCS checks and the Install / Repair Hook button are hidden.
- Updates: an update that installs the DCS Bridge keeps your crew and tanker voice choice.
- F/A-18C crew chief: "Hey chief" works with the radios off, and a long reply is split instead of lost. Tanker calls and mission questions go out on the radio you keyed only.
- AI_RADIO's own lines no longer go into dcs.log: they go to AI_Radio.log in DCS's Logs folder.
- Updates: when DCS stops an update installing, the line under the Update button reads "Close DCS to install".
- SRS: when you typed a server name that resolves to the server you are on, AI_RADIO sends SRS the name you typed instead of the address.
- Jester: a fault in the Jester add-on goes to the log and no longer sets the DCS tab's Hook status.
- DCS Bridge install: Windows' firewall approval for a repair now belongs to the AI_RADIO window too.