Skip to content

MegaOpen v1.11.0-rc1

Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 08 Nov 16:36

The web installer, and WiFi from it (Improv).

Added

  • Web installer. https://barbedx.github.io/MegaOpen/ (ESP Web Tools, Chrome/Edge) flashes the Latest release, or a newer pre-release, over USB with no Python. A running board goes into download mode from the page («Перевести в режим прошивки», a 1200-baud open of its USB port; no buttons). The image is written around the nvs partition, so settings and WiFi survive. GitHub Pages builds the site after every release (tools/stage_installer.py, .github/workflows/pages.yml); the WebUSB page stays at /usb/.
  • WiFi from the installer (Improv). The firmware speaks Improv Wi-Fi on its USB serial (src/net/Improv.*, ImprovSerial.*): «Встановити» on a running board → «Connect to Wi-Fi» lists the networks it sees, and the board joins the chosen one at once, no reboot, and answers with its address. The network is saved as the first one only after it joined; a wrong password leaves the old one in place. Host test test_improv.

Fixed

  • README's first flash wiped the settings. The whole -factory.bin at 0x0 pads over nvs with 0xFF; README and the release notes now say so and point at the installer.

Built from 38249bd with AffaDisplay@6183b2e.

First flash over USB: the web installer, https://barbedx.github.io/MegaOpen/ (keeps the settings), or esptool write-flash 0x0 megaopen-<env>-1.11.0-factory.bin (wipes them).
Later updates: megaopen-<env>-1.11.0.bin from the board's /update page.
The head unit's app: install megaopen-companion-1.11.0.apk (Android 7+, no root).