20231216

Notes:

• With this update, the sensor will not automatically pause when SD card error detected. If SD card is accidentally ejected, it will wait until SD card is inserted, then resume recording. A line will be added in the CSV file indicating SD card error.

How to upgrade the firmware:

• Connect the sensor to a computer via USB
• With the sensor powered on, double tap the RESET button on the side. (If the sensor is enclosed in the case, you can use an M2 allen-key through the provided hole on the side of the case). This will bring up the "NRF52BOOT" sensor folder.
• Drag and drop the compiled binary ("firmware_xxxx.uf2") file into this new folder. The sensor will automatically disconnect and update the firmware.
• Reconnect the sensor and configure via the dock program.