Repository navigation
EntryNav-Apps 0.1.1
Engine Fault Codes joins as a fourth plugin, BM3 Maps becomes Bootmod3 Suite with Active Sound and burbles, and BoostDeck and ShiftDeck are faster, with new screens.
Ported from upstream's 14 November update (inotbarnacle/ID6_apps_prerelease, 697a3fa to a402dd0).
- Engine Fault Codes, a new plugin. It reads the DME's fault memory, four codes a page with upstream's
descriptions, and clears it, retrying the clear in the extended session when the DME asks for that. - BoostDeck has cards. Each reading gets a card in a 4 × 2 grid, after upstream's new layout: the name is drawn in
the card, with the value under it and a rounded bar at the bottom. The engine readings take the top row. - BoostDeck is faster. The collector reads every 35 ms instead of 150 ms, and the screen takes a frame every 25 ms.
- ShiftDeck is smoother and faster. It reads engine speed every 20 ms and road speed every 65 ms. The rev bar has
128 steps instead of 32 and eases between readings. A new Speed screen picks MPH or km/h, and the choice is kept. - BM3 Maps is now Bootmod3 Suite, as upstream calls it, since it does more than maps. Its plugin, folder,
worker and Flare Drive feed keep their names, so an install of 0.1.0 updates in place, firewall rule included. - Bootmod3 Suite has Active Sound and burbles, from bootmod3's controls in cauliflowermossgrape's BM3 Live port. Burbles
write the ROM's timing table and switch and read both back. Upstream's exhaust flap screen is left out: bootmod3
sets the flap in each map, and the DME lets a one-off flap request go after about 20 seconds. - Bootmod3 Suite's tiles are larger and show the active map, outlined with an ACTIVE tag, whenever the last read
confirmed it. Any other answer leaves no tile marked. - Engine Fault Codes colours each row's mark by its state: red for Active, amber for Pending, blue for Stored.
- MHD+ Suite, a new plugin (mhd-maps), added to 0.1.1 after its release, from
81f41fa. It is unverified: it
hasn't run in a car yet, and Flare Drive's feed has it as experimental. It switches an MHD+ multi-map tune's four
maps and turns Max Cooling on or off, with the commands cauliflowermossgrape's Live Adjustments sends. A request
counts only when the DME echoes it, and no tile is marked, since MHD can't report the active map.
Each plugin is its own archive. Install it with Flare Drive, or by hand with the setup.sh inside it: see Installing in the README. Each .sha256 file holds its archive's SHA-256.