Repository navigation
Releases
DeskHome 1.6.0
DeskHome 1.6.0
New:
- Gauge tile: a 240° arc with the value in the middle and the scale ends below; the tile's color ranges show faintly as the track, the filled part has the current color and glides to new values. "Arc from – to (full)" sets the start and the full-scale value (e.g. 0 and 1000 Mbit/s). Thermostats show their current temperature with the target below, on the range of their settable temperatures.
- Color ranges per tile: from–to with a color each (e.g. good / normal / bad, open ends allowed). They color the value, the history line and the gauge, and with "label in the status color" the name too. Warning and critical still take precedence.
Fixed:
- The "Edit tile" and "Remove tile" windows use the application colors: with a dark Plasma theme and light application colors their labels were hard to read (forum report).
Docs: the tile guides describe the gauge and the color ranges, with an energy-price example.
DeskHome 1.5.0
DeskHome 1.5.0
Watching Home Assistant as a whole (new settings page "Watching", all off by default):
- Problem list: devices whose entities have all been unavailable for a set time (e.g. a Zigbee sensor with a flat battery), and motion/presence sensors stuck on "on". Click opens the device in Home Assistant, right-click ignores it; ignore list with * patterns. Media players and devices that only lost single entities are left out.
- Home Assistant messages: notifications, open repairs and available updates as counts in a small tile, each opening its page; new notifications optionally as desktop notifications.
- The weak-battery list moved to this page.
Tiles:
- "Seen": right-click a warning tile to quiet it (no border, pulse or blinking) until its value was OK again.
- Yesterday's line: yesterday's history faintly behind today's (Values & history, graphs up to 24 hours).
Settings:
- Six pages instead of three: General, Tiles, Watching, Tile style, Colors, Values & history, each split into titled sections.
- A "?" help button next to every setting that needs explaining, in all four languages.
- The URL hint says: the same address as in the browser, the port only if it is there.
- A small "Buy me a coffee" link under General.
Authors: Charonscope, Krzysztof Korab (original plasma-homeassistant).
DeskHome 1.4.0
DeskHome 1.4.0
From your feedback in the forum:
- Display only: for all tiles (Tiles page) or single ones (tile settings → Control), click, double click and the scroll wheel switch nothing. Opening the history still works.
- Three colors from the thresholds: "value in the OK color" and "label in the status color" (tile settings → Show status), e.g. an energy price in green, yellow and red without the colored border.
- Own status colors for OK, warning and error (Appearance → Colors).
- Tiles can blink on warning/critical (tile settings → Show status; needs animations).
- Logarithmic history graph per tile: small values stay visible next to large peaks.
- Combo tiles: own color for the line of the second value, e.g. a blue humidity line under a neutral value.
- New value font weight "Light".
- The automatic backup keeps the three previous versions (name.1.json … name.3.json); they only move on when the content changed.
Docs:
- New guide for creating tiles (docs/tiles.md, German: docs/kacheln.md), linked from the README.
- README: packages per distribution, desktop vs. panel, troubleshooting, Home Assistant URL with or without port.
Tests now also run on Debian 13 (Plasma 6.3).
DeskHome 1.3.1
DeskHome 1.3.1
From your feedback in the forum:
- Per-tile colors: in a tile's settings ("Colors of this tile") the value, label, second value, line, background color and background opacity can each be set for this tile only. Warning and error colors always take precedence.
- "Simple" tiles now use the font colors, warning colors and counting values like all other tiles.
- Value font weight: normal, semi-bold or bold (Appearance → Values).
- Color for the second value of combo tiles (Appearance → Colors); it was always green.
- The "On/Off" text of switches can be hidden (Appearance → Values).
- Icon picker: search all bundled Material Design icons, or pick a system icon with KDE's icon dialog.
New:
- Update hint: DeskHome checks GitHub once a day and shows a closable hint when a new version is out, with links to the changelog and the KDE Store. Can be switched off under General.
- The weak-battery list also shows devices that only report "battery low" (e.g. Homematic IP thermostats).
Fixed:
- The light icon lost its color after changing the brightness.
- The tile edit window did not scroll, so its lower settings were cut off.
DeskHome 1.3.0
DeskHome 1.3.0
New:
- Search entities by display name, area or id in the tile settings; several words narrow the search.
- Add a whole area at once ("Area …" on the Tiles page): pick an area, untick what you do not want. Existing, hidden and diagnostic entities are left out.
- Headings: a tile can carry a heading that starts a new row (e.g. Balcony, Technology, Batteries).
- Weak batteries: set a threshold on the Tiles page and DeskHome finds every battery sensor in Home Assistant on its own and lists those below it. No tiles needed.
- Optional time since the last change ("5 min ago").
- A click on a sensor, combo or status tile without its own action opens the history in Home Assistant.
- Meaningful animations: rpm sensors and running fans turn their icon with the speed, critical tiles pulse slowly, motion sensors send a short wave, history lines draw in. The "Animations" switch turns these off too.
- Spanish and French. "Automatic" follows the system language for German, English, Spanish and French.
Fixed:
- Thermostat tiles with a configured scroll action showed a brightness bar and sent the target temperature twice.
- New tiles get the chosen default display (panel and/or full view).
- Changes from the right-click menu now also update the automatic backup file.
- Sensor tiles without a graph were too low for their value.
- A TypeError after the tile view was rebuilt; a binding loop in the tile edit dialog.
DeskHome 1.2.0
DeskHome 1.2.0
New:
- Thermostat tile for heating (climate entities): current temperature large, humidity if available, target temperature below. The scroll wheel sets the target; it is sent once the wheel rests. The icon turns orange while the thermostat reports heating.
- Combo tile: two values of one place in one tile (e.g. temperature and humidity), each with its own history line and trend arrow.
- Right-click menu on tiles: edit the tile in its own window, set its width (½, 1 or 2 columns), open its history in Home Assistant, remove it (with confirmation), open the settings. Locked widgets only offer the history.
- Color source: Plasma color scheme or a Home Assistant theme (loaded from your HA, light or dark follows Plasma). Accent, text, tile and status colors come from the theme.
- Own font colors for values and labels; warning and error colors always take precedence.
- Smooth transitions: values count up and down, colors fade, tiles fade in and slide into place, the brightness bar fades in. The speed follows Plasma's animation speed; can be switched off.
Improved (thanks for the feedback in issue #3):
- Decimal places: "automatic" and "unchanged (as HA sends it)" are separate choices
- Own tile style is the default (opacity, color, radius and borders apply)
- The border around switched-on tiles is optional and off by default
Under the hood:
- Tests for HA theme parsing, a render with a theme, counting values and the tile editor window
DeskHome 1.1.0
DeskHome 1.1.0
New:
- Connection banner: when Home Assistant is unreachable, a warning bar appears above the tiles ("No connection to Home Assistant since 14:05 – reconnecting …"), the tiles are dimmed and the panel icon gets a red dot. A rejected token is reported right away.
- New connection layer: reconnects on its own with growing pauses, detects dead connections within about 20 seconds (e.g. a pulled network cable) and no longer retries endlessly with a wrong token.
Improved:
- Smoother dimming with the scroll wheel (5 % per notch, sent once the wheel rests, no jumping back)
- Active/hover frame and brightness bar follow the tile's corner radius
- Tiles are positioned reliably for any widget width, including half tiles
Under the hood:
- Automated tests (QML lint, translations, all settings pages, tile view rendering) run on every push; a release is only built when they pass
- Code comments in English
DeskHome 1.0.2
DeskHome 1.0.2
Fixes:
- The Tiles settings page did not open (it kept showing the previously opened page) – a missing import broke the page (#1)
- Pasting the Home Assistant URL was silently rejected when it had a trailing slash, a path (e.g. /lovelace/0) or spaces; such URLs are now cleaned up automatically, invalid ones show a message
- Pasting a token with surrounding spaces or a line break works now
Thanks to totow93 for the report!
DeskHome 1.0.1
DeskHome 1.0.1
Fixes:
- Placeholders in texts were not replaced (e.g. "On · 60 %" for lights, "6 hours" in the history list, tooltips, import messages, URL example) – a QML engine quirk with forEach closures
- Token help now mentions that the Tiles page appears after saving URL and token
DeskHome 1.0.0
First release of DeskHome – your Home Assistant on the KDE Plasma 6 desktop.
Highlights
- Tile grid with automatic tile types: sensor with history graph, light/switch, status light, simple
- History graphs (1 hour – 7 days) with min/max and trend arrow
- Warning/critical thresholds, custom OK states, “only show when abnormal” with summary tile
- Half-width tiles
- Appearance settings: transparent background, tile opacity/color/radius, size, spacing, font sizes, graph style
- English and German interface
- Full backup and restore (token is never exported)
Install: download deskhome-1.0.0.plasmoid and run
kpackagetool6 -t Plasma/Applet -i deskhome-1.0.0.plasmoid
Requirements: Plasma 6, Qt WebSockets QML module, KWallet, a Home Assistant long-lived access token.
Based on plasma-homeassistant by Krzysztof Korab (GPLv3).