Skip to content

RidePlay 0.3.1 — public preview

Pre-release
Pre-release

Choose a tag to compare

@Chiccccken Chiccccken released this 15 Nov 14:03
· 8 commits to custom since this release

RidePlay 0.3.1 — public preview

RidePlay is a DiPlay-based CarPlay receiver with opt-in adaptations for motorcycle
media controls. This preview has been tested with a 2019 KTM 390 Duke and an
iPhone 14. Other vehicles and Android firmware need their own testing.

Changes

  • Optional audio-free media controls forward Android media keys to the iPhone.
    The default-off Media-key routing bootstrap (experimental) helps the tested
    ROM select RidePlay for handlebar media keys after iPhone media information is
    available or the driver returns to CarPlay.
  • RidePlay registers its own media-button receiver when this mode is enabled,
    including recovery after process restart and an in-place app update.
  • Update checks now use Chiccccken/RidePlay releases and reject downloads from
    other repositories. Settings backups include RidePlay media-control, pinyin,
    orientation and artist-name choices, with type validation.
  • Diagnostic reports include bounded iAP2 command summaries and unacknowledged
    packet attribution without exporting protocol payloads. Temporary subscription
    and packet-pacing experiments are not included in this release.
  • Native diagnostic filenames use project-relative paths, so the distributed
    libraries do not expose the build machine's username or source directory.

Tested and known limitations

The owner confirmed installation, reconnecting within the app, connecting after a
receiver reboot, repeated vehicle use, handlebar play/pause/track changes and music
from the iPhone to the headset. The app's runtime diagnostics reported iOS 27.2.1.
These results do not establish Siri/call audio, every background-recovery scenario,
other vehicles or other ROMs.

  • Routing bootstrap is off by default and takes effect after reconnecting. When
    enabled, returning to CarPlay may take media-key ownership from another Android
    player. The tested control-only setup keeps music output on the iPhone/headset.

Installation

Install RidePlay-0.3.1.apk on the Android receiver. The release package is
com.chiccccken.rideplay, versionCode 45. It can update the same officially signed
RidePlay candidate/diagnostic package in place. Installation ends an active
CarPlay session, so reconnect afterward. Do not uninstall or clear app data to
perform this update.

The earlier .debug package is a separate installation. Back up settings before
moving from it, configure the new app's permissions and hotspot details, and run
one receiver app at a time. Do not delete a shared iPhone vehicle record merely
to change the Android app package.

Verify downloads against SHA256SUMS.txt. The release includes corresponding
source with the original license notices. The standalone APK includes the
upstream experimental accessory authentication identity; it is not an
Apple-certified product. Source archives exclude authentication keys and the
Android release-signing key. See third-party notices and
build instructions.

中文摘要

0.3.1 是面向有限实测范围的公开测试版。已确认安装连接、App 内重连、接收设备重启后
连接、多次实车使用、车把播放/暂停/切歌,以及 iPhone 到头盔的音乐输出正常。

新增默认关闭的媒体按键选路引导,改善实测 ROM 的车把媒体键选路;更新检查改为
RidePlay 自有仓库,设置备份补齐个性化项目,诊断增加安全的协议命令摘要。
本版保留原有完整协议订阅及发送行为,不包含临时跳过订阅或限制发送节奏的实验。
原生库诊断文件名已映射为项目相对路径,公开包不再包含构建机器的用户名或源码目录。

Siri/电话等未确认的路径不扩大验收。

同正式签名的候选/诊断版可覆盖安装并保留数据;旧 .debug 包与正式包互相独立。
安装会结束当前连接,之后重新连接即可。源码、许可证和校验文件随发布提供。

Build verification

The full local Android check command passed (3612 tests, three Debug builds and
lint), followed by standalone release build/lint, APK verification and an artifact
privacy scan. Cloud Android checks
also passed on November 16, 2026, for commit 1fcda67. That revision differs
from the v0.3.1 source only in README and release documentation.

Cloud checks cover unit tests, lint and source-only Debug builds. The standalone
release APK checks and the scoped field acceptance remain the separate local and
device results described above.