Repository navigation
v0.1.0
First release: MicroPython 1.29 and LVGL 9.5 firmware for boards that upstream MicroPython does not cover. import display_driver is all an application needs, and the examples fit any resolution.
| Board | File | State |
|---|---|---|
| STM32H7_CORE V1.3 + IPS 1024x600 | STM32H7_CORE-V13-v0.1.0.hex |
tested on hardware: this firmware, 58 fps, soak on the previous firmware |
| ESP32-4848S040 | ESP32_4848S040-v0.1.0.bin |
tested on hardware: 42 fps, 15 min soak |
| Waveshare RP2350-Touch-LCD-4 | WAVESHARE_RP2350_TOUCH_LCD_4-v0.1.0.uf2 |
tested on hardware: this firmware, 57.8 fps, works at 240x240 (no PSRAM) |
| STM32H7_CORE V1.0 | STM32H7_CORE-V10-v0.1.0.dfu, .hex |
tested on hardware: this firmware, 58 fps, 15 min soak |
| DEV190806042 | DEV190806042-v0.1.0.hex |
builds, never run on a board: use at your own risk |
| FK743M5-XIH6 | FK743M5-XIH6-v0.1.0.hex |
builds, never run on a board: use at your own risk |
Flashing
- STM32:
scripts/stm32_uart_flash.py flash <file>.hex --verify, through the ST bootloader on UART1 with DTR on BOOT0 and RTS on NRST (seedocs/stm32h743.md). It is the only method tested on the other STM32 boards. - STM32H7_CORE V1.0:
dfu-util -a 0 -d 0483:df11 -D STM32H7_CORE-V10-v0.1.0.dfu, with the board in DFU mode: hold BOOT0 and press RESET, then press RESET again after writing. Seedocs/flash-dfu.md. - ESP32-4848S040:
esptool.py --chip esp32s3 -p <port> erase_flash, thenesptool.py --chip esp32s3 -p <port> -b 460800 write_flash 0x0 <file>.bin.erase_flasherases everything on the board; without it, a board that had other firmware can stop at boot with "The filesystem appears to be corrupted". The native USB is off: use the board's USB-UART. - RP2350: hold BOOTSEL while connecting, copy the
.uf2to the drive.
Known limits
- ESP32-4848S040: a full-screen redraw takes about 155 ms, and
gc.collect()190 ms, a visible pause in animations. - A Python
flush_cbcan hang the board on Ctrl-C;display_driveris not affected, its flush is in C. - Running out of memory while LVGL renders hangs the board: there is no way to catch it. Mainly a risk on the RP2350 (no PSRAM).
- Backlight is on/off on the STM32 and ESP32 boards.
Sources: MicroPython 1.29.0, ESP-IDF 5.5.2. STM32 and RP2350 on lvgl-micropython 3e287e7 with patches/; ESP32 on omnipython-lvgl 92f8c0a. Details: docs/. Checksums: SHA256SUMS.