Docs review and the district simulators plan - Home, Node-Lite, DCC-EX, LocoNet Adapter, Architecture, RocNet on the Mesh, Module and Layout Files: brought up to date (GCA101 stage 2, lite servers and failover, turnouts on DCC-EX, sensors as RocNet, the module editor, O6 answered); two broken anchors and the Node-Lite button table fixed. - New page District Simulators and Train Tracking: the plan, steps 1 to 5 built. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Serial LocoNet interface, Intellibox I stage 2 and the node file as TOML LocoNet adapter: the serial interface (--loconet-serial) with the settings for the Intellibox I's RS232 port, a LocoBuffer-USB and the Intellibox II; the status now matches the slot owners; stage 2 uses the Intellibox I (65000) with its config file and first bench steps; L-Q4 answered, L-Q3 partly; new L-Q8 (the Intellibox's own controls on LocoNet) and L-Q9 (its fast clock). The release byte was given as B5 slot 03, which is FREE: COMMON is 13, and the code's bug is noted. Module and layout files: the node file is implemented as a TOML config file (--config). DCC-EX adapter: node ids MacBook, RaspberryPi and Windows, and the config file. Home and FRED pages: status and defaults. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Module and layout files design, DCC-EX loco driving, takeover on the beam restore - New design page: module, node and layout files; blocks with rail cuts, sensors by running direction, geometry, a module editor later; top-view SVGs of an example module, a standard 2E96 double-track module and a district border on double track. - DCC-EX Adapter §3.1: driving locos from the register. - Takeover: the receiving node switches the transfer block when the beam at its entrance is restored (the last car has passed) and the source edge block is clear, instead of after a fixed delay; transfer blocks are cut in both rails; on double track each district hosts the transfer block for its incoming track. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Update status: DCC-EX on the 2021 board, node board in progress Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Buttons implemented; district power follows MAIN tracks Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DCC-EX: read-only commands, no voltage, <c> crash Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
DCC-EX: RocNet address in examples, behaviour without motor shield Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Add the DCC-EX adapter page and the Rocrail clock test New DCC-EX Adapter page: connection, commands and replies, overload reporting from the EX-CommandStation source, the fast clock and the recorded ESP32 transcript. RocNet on the Mesh records the Rocrail fast clock test and the updated implementation status. The architecture spec notes the known DCC-EX overload token. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>