Skip to content

CompuServe

github-actions[bot] edited this page Nov 16, 2026 · 11 revisions

CompuServe

A listener with frontend = compuserve serves a recreation of the CompuServe Information Service in place of the menus of the BBS. It uses the users of the BBS. Its objective is to operate with the real CompuServe software: terminal programs, offline readers (TAPCIS, AutoSIG, OzCIS) and the CompuServe Information Manager (WinCIM, DOSCIM, MacCIM). The scripts of these programs look for the exact prompts of that period. Thus, the service keeps these prompts.

[listen cis]
type = telnet
address = :2324
frontend = compuserve

A raw listener also operates: modem callers through app_dmodem dial directly into CompuServe. connect = 9600 sets the CONNECT line that the service shows before Host Name:. It is on by default for telnet, because the scripts of CIM expect it over TCP. It is off for raw listeners, because the modem already sent it.

Logging on

Host Name: CIS
User ID: 72000,1
Password:
  • Host Name: CIS, CPS or CISAGREE, the names that the scripts of CompuServe send.
  • User ID: the account number written as a CompuServe ID: account 1 is 72000,1. It uses only octal digits, as the IDs of CompuServe did. A caller can also type the BBS name. In that case, the service shows the ID at logon. The ID can have the usual options, for example /INT:60, ;TTY and /GO:word.
  • Password: the BBS password.
  • Bad logon: an incorrect ID or password gets ?? LOGINE - Invalid entry - try again. Locked accounts and throttled addresses get the ?LOG codes of CompuServe.

After the logon, the host sends ESC I. Terminals that know it answer with their identification, which shows in who's online. A CIM client (AP in its reply) gets the graphical service. Refer to the text below.

CIM (WinCIM)

CIM clients use HMI, a binary protocol inside B Plus packets. The service follows the data that 24high/CompuServe-Emulator recovered from WinCIM 3.0.2: the Secure Login, the terminal-mode exchange after it, the B Plus Transport Layer, and the HMI messages for pages. In WinCIM, you can do these actions:

  • Browse the main menu, the menus and articles of pages.txt, What's New and the Table of Contents, and use Find.
  • Read the forums: the forum list, the sections and libraries of a forum, the messages of a section (newest first) and each message. A message that you read counts as read.
  • See the files of a library (downloads still must have a terminal program).
  • Read your mail with Get Mail: the mailbox, newest first, with the mark * on unread letters. When you read a letter, the service marks it as read.

CIM cannot yet send mail, post to forums, download, or use the CB. WinCIM sends mail and forum messages through its own transactions, which nobody has recovered yet. For now, use a terminal program for those tasks.

Point WinCIM at the listener over TCP (with the DNS server of the BBS, HostIPAddress can be compuserve.com). In CIS.INI, the CommType=WINSOCK, WinsockCommType=Local and HostIPAddress of the connector set this. The port of CompuServe for this was 4144:

[listen wincim]
type = raw
address = :4144
frontend = compuserve
connect = 9600

Secure Login. CIM logs on with the Secure Login Protocol (+ before the User ID). This protocol never sends the password. The host checks it against a key that it keeps from the password. The host keeps that key only while a compuserve listener runs. It makes the key the next time that the user logs on with the password or sets a password. Until then, a Secure Login fails with No., and the log gives the reason. Log on one time from a terminal, or set DisableSecureLogin=ON in CIS.INI for one plain login.

We did not try any of this with a real WinCIM yet. That is the next set of tests.

Commands

Command Does
a number selects that menu item
T the TOP menu
M the previous menu
B back one page
F forward one page
R sends the page again
N / P the next or previous item of the menu
H or ? help
GO word goes to a page by GO word or page ID
FIND topic lists the pages that contain a topic
SET BRIEF ON brief ! prompts
SET PAGED ON stops at each screen
SET WIDTH n / SET LINES n screen size
OFF or BYE signs off
LOG signs off and goes back to User ID:

You can join commands with ;, as in SET BRI ON;GO RATES.

Terminal settings (GO DEFAULT)

SET changes the settings of the session. GO DEFAULT (or TERMINAL, or item 1 of GO PROFILE) keeps them with your User ID, through the menus of CompuServe: TERMINAL SETTINGS/SERVICE OPTIONS, then PERMANENT SETTINGS with its Logon/Service, Display, Terminal and Transfer protocol groups. When you leave, you confirm the changes. The screens follow the ALT-P script of TAPCIS (PARAMS.SCR, 1991), which configures a new member through them.

The kept settings do these functions:

  • PAGED, BRIEF, WIDTH and LINES apply at each logon.
  • Mail waiting: Go to MAIL goes directly into Mail when letters wait.
  • Online editor sets the line numbers of Mail when Mail has no setting of its own.
  • Protocol preference (B, Quick B, XMODEM or Kermit) skips the protocol menu.

The service keeps and shows the other settings, as scripts expect, but they do nothing here: terminal type, parity, delays, first service, TOP goes to, forum mode and graphics support. Forums are always in command mode. To log on with the defaults one time, add ;TTY to the User ID (72000,1;TTY).

Forums

GO FORUMS lists the forums. Each forum is a group of the message areas of the BBS. Each area in it is a section (S0, S1, ...). Areas that are not in a group make a forum with the name of the BBS. The service divides a group with more than 18 areas into more than one forum, because the forums of CompuServe had a maximum of 18 sections. The GO word of a forum is its name in capitals, with letters and digits only (Amiga Tech is GO AMIGATECH). Message numbers are the numbers of the BBS. Thus, they increase across the forum, with gaps.

The forum operates in command mode, at Forum !. TAPCIS and the other offline readers must have this mode:

Command Does
REA [NEW|ALL|WAI|REV|THR] [FROM:x] [TO:x] [SUB:x] [SEC:n,n] [DAYS:n] [STA:n] [n] reads (NEW by default). Read action ! after each: RE reply, RER read again, P parent, CR next
SCA ... / SCA QUI ... the headers, or one line for each
BRO ... one header at a time, read on CR
POST [SEC:n] [TO:x] [SUB:x] writes a message (EDIT: /EX then S to store, or /POST)
DES / NEW the sections. The new messages in each
OPT;TYP N reads with no stop (TYP P stops again). The service accepts the other OPT settings
MES / M the Messages ! prompt and back
EXIT, M, T, GO x, OFF leaves the forum

Headers follow those of forum software 4:

#: 2 S1/Software
    08-Nov-26  11:30:05
Sb: #1-Kickstart 1.3
Fm: sysop 72000,2
To: alice 72000,1

Membership (JOIN) and conferences are not available yet.

Libraries

The libraries of a forum are the file areas in its group, with numbers from 0, as its sections have. File areas that are not in a group are the libraries of the forum with the name of the BBS. To put a file area in a group, use bbs filearea group AREA GROUP.

LIB n from Forum ! opens a library, at LIB !:

Command Does
DIR [name] [/DES] [KEY:x] [AGE:n] the files, newest first. With /DES or a name, their title, keywords and description
BRO ... one file at a time, with a disposition menu
SCA [/DES] ... one or two lines for each (NAME/Bin Bytes: n)
DOW name [/PROTO:B|QB|XMODEM|KERMIT|CAPTURE] downloads. Without /PROTO:, the protocol menu of CompuServe
UPL name [/PROTO:...] [/TYPE:ASC|BIN] uploads, then the title, keywords and description (a maximum of 465 characters)
LIB n, M a different library. Back to the forum

The B and Quick B selections run the B Plus engine. The host sends ENQ, and the answer of the terminal selects Classic B, Quick B or B Plus. XMODEM and Kermit print the start message of CompuServe, and wait for a CR when the transfer is complete. Downloads count against the daily limits and ratios of the BBS, as on the BBS. Entries look like this:

[72000,2]
BPLUS.ZIP/binary          08-Nov-26 8700         Accesses: 1

    Title   : B Plus for everyone
    Keywords: BPLUS PROTOCOL

Mail

GO MAIL (or EASY, EASYPLEX) opens CompuServe Mail. It is the private mail of the BBS. Mail sent here arrives in the mailbox of the BBS, and mail sent on the BBS arrives here. A message is pending until you read it. Read messages stay in the mailbox, as if saved, until you delete them.

Mail starts in menu mode, as the Mail of CompuServe did. SET opens the Options Menu. There, option 2 changes the mode to PROMPT or COMMAND. The answer to Make changes permanent for future Mail sessions ? (Y or N) ! keeps it with the account. The setup script of TAPCIS (PARAMS.SCR, run by Alt-P) does exactly this, then set edit noline and set page off. The service also keeps these. In command mode, the prompt is Mail!.

Command Does
READ [n|ALL|SAVED] reads the pending messages (or the saved ones). Action! after each: CR next, DELETE, SAVE, REREAD, REPLY, FORWARD [address], DOWNLOAD [/PROTO:x]
SCAN [ALL|SAVED] one line for each: 1 alice/Testing
COMPOSE [address] writes (EDIT, with /EX at the end), then Send to (Name or User ID):, Subject: and Send? (Y or N)!
UPLOAD [/PRO:B] [/TYP:ASCII|LATIN1] the text of a message by a protocol, then the same questions (the UPL/PRO:B/TYP:ASCII MAIL%.TMP of TAPCIS)
DOWNLOAD [n|ALL|SAVED] [/PROTO:x] messages as one text file, by a protocol
DELETE n deletes a message
ADDRESS the address book, which the service keeps (it is the same one that the Exchange of MSN Classic uses), and NAME for your Mail name (for this session only)
SET, SET MODE x, SET EDIT x, SET PAGE x, MODE the options
EXIT, T, GO x, OFF leaves Mail

Addresses use the forms of CompuServe: a BBS name, a User ID (72000,1), a name and an ID (Sysop 72000,2, Sysop [72000,2]), or a name and a network address after >. INTERNET:72000.1@compuserve.com is a member here. The service refuses other Internet addresses, FAX, POSTAL, MCIMAIL, X.400 and MHS, with a message that tells this. A FidoNet address (Bob@1:234/5) goes out as netmail when the BBS is on FidoNet. An address that ends in ; asks for another address. The service accepts a /R (return receipt), but does not do it.

A message looks like this:

Date:  08-Nov-26 12:40 UTC
From:  alice [72000,1]
Subj:  Testing

Hello from Mail.

CB Simulator

GO CB opens the CB Simulator. Its channels are the chat rooms cb-1 to cb-36 of the BBS. Thus, callers in the chat of the BBS, or on IRC, can also join a channel. A CB caller selects a handle, which cannot be the name of a different member, and a channel. Then all text that the caller types goes to that channel. A line from the tuned channel shows as (Handle) text. A line from a monitored channel shows as (17,Handle) text. Other CB callers see the handle. The other chat programs of the BBS see the name of the caller.

Command Does
/TUN n tunes to channel n (1-36)
/MON 1,4, /UNM 1,4 also listens to other channels, or stops
/STA the number of users on each channel
/UST [n] the users on CB: job, User ID, channel (17s scrambled, Tlk talking), node, handle
/WHO the User ID of the last user who sent a line
/HAN name changes your handle
/SCR key, /SMC key, /XCL key, /UNS scrambles the text that you send and unscrambles the text that you get, one of the two, or neither
/SQU handle squelches a handle (again to unsquelch)
/TALK job talks with one caller only (/EXIT back to the channel)
/ROLL [3D6] rolls dice for the channel
/TIM, /JOB, /HELP the time, your job number (the BBS node), the commands
/EXI, /OFF leaves CB, or logs off

Scrambling operates as it did on CompuServe. The key permutes all text that you send, and the key reverses the permutation on all text that you get. Thus, only callers who use the same key can read each other.

What is there and what is coming

Done Coming, in order
The logon, ESC I, the menus and articles (internal/cis/pages.txt), GO, FIND, SET, permanent settings (GO DEFAULT) Forum JOIN and member options
Forums on the message areas, with the forum command language
The CompuServe B, Quick B and B Plus protocols (internal/xfer/cisb.go) B Plus resume (Tr) and file information (TI)
Libraries on the file areas, with B+ downloads and uploads
CompuServe Mail on the private mail of the BBS Binary mail
The CB Simulator on the chat rooms Forum conferences (CO)
CIM: Secure Login, the B Plus Transport Layer, HMI pages, menus, articles and Find
CIM: reading forums and Mail, library lists CIM: sending mail, posting, downloads, CB

The research for all of this, with sources, is in docs/cis.

Clone this wiki locally