Repository navigation
CompuServe
A listener with frontend = compuserve serves a recreation of the
CompuServe Information Service instead of the BBS's menus. It runs on the
BBS's own users, and it aims to work with the real CompuServe software:
terminal programs, offline readers (TAPCIS, AutoSIG, OzCIS) and, later,
the CompuServe Information Manager (WinCIM, DOSCIM, MacCIM). Their
scripts look for the period's exact prompts, so the service keeps them.
[listen cis]
type = telnet
address = :2324
frontend = compuserveA raw listener works too: modem callers through app_dmodem dial
straight into CompuServe. connect = 9600 sets the CONNECT line shown
before Host Name:. It is on by default for telnet, which is what CIM's
scripts expect over TCP, and off for raw listeners, where the modem has
already said it.
Host Name: CIS
User ID: 72000,1
Password:
-
Host Name:
CIS,CPSorCISAGREE, the names CompuServe's own scripts send. -
User ID: the account's number written as a CompuServe ID: account 1
is
72000,1, using octal digits only, like CompuServe's own. A caller can also type their BBS name; in that case the ID is shown at logon. The ID may carry the usual options, such as/INT:60,;TTYand/GO:word. - Password: the BBS password.
-
Bad logon: a wrong ID or password gets
?? LOGINE - Invalid entry - try again. Locked accounts and throttled addresses get CompuServe's?LOGcodes.
After the logon the host sends ESC I. Terminals that know it answer
with their identification, which shows in who's online. CIM clients
(AP in their reply) are told ?LOG CAI for now, because the graphical
(HMI) service is not built yet.
| Command | Does |
|---|---|
| a number | that menu choice |
T |
the TOP menu |
M |
the previous menu |
B |
back a page |
F |
forward a page |
R |
resend the page |
N / P
|
next or previous item of the menu |
H or ?
|
help |
GO word |
go to a page by GO word or page ID |
FIND topic |
list the pages that mention a topic |
SET BRIEF ON |
brief ! prompts |
SET PAGED ON |
stop at each screen |
SET WIDTH n / SET LINES n
|
screen size |
OFF or BYE
|
sign off |
LOG |
sign off and go back to User ID:
|
Commands chain with ;, as in SET BRI ON;GO RATES.
GO FORUMS lists the forums. Each forum is a group of the BBS's message
areas, and each area in it is a section (S0, S1, ...). Areas in no group
make up a forum named after the BBS. A group with more than 18 areas is
split into several forums, because CompuServe's forums had at most 18
sections. A forum's GO word is its name in capitals, letters and digits
only (Amiga Tech is GO AMIGATECH). Message numbers are the BBS's own,
so they rise across the forum with gaps.
The forum works in command mode, at Forum !, which is the mode TAPCIS
and the other offline readers need:
| Command | Does |
|---|---|
REA [NEW|ALL|WAI|REV|THR] [FROM:x] [TO:x] [SUB:x] [SEC:n,n] [DAYS:n] [STA:n] [n] |
read (NEW by default); Read action ! after each: RE reply, RER reread, P parent, CR next |
SCA ... / SCA QUI ...
|
the headers, or one line each |
BRO ... |
a header at a time, read on CR |
POST [SEC:n] [TO:x] [SUB:x] |
write a message (EDIT: /EX then S to store, or /POST) |
DES / NEW
|
the sections; the new messages in each |
OPT;TYP N |
read nonstop (TYP P pauses again); the rest of OPT is taken |
MES / M
|
the Messages ! prompt and back |
EXIT, M, T, GO x, OFF
|
leave the forum |
Headers follow forum software 4's:
#: 2 S1/Software
08-Nov-26 11:30:05
Sb: #1-Kickstart 1.3
Fm: sysop 72000,2
To: alice 72000,1
Membership (JOIN) and conferencing are not there yet.
A forum's libraries are the file areas in its group, numbered from 0 like
its sections. File areas in no group are the libraries of the forum named
after the BBS. Put a file area in a group with
bbs filearea group AREA GROUP.
LIB n from Forum ! opens a library, at LIB !:
| Command | Does |
|---|---|
DIR [name] [/DES] [KEY:x] [AGE:n] |
the files, newest first; with /DES or a name, their title, keywords and description |
BRO ... |
a file at a time, with a disposition menu |
SCA [/DES] ... |
a line or two each (NAME/Bin Bytes: n) |
DOW name [/PROTO:B|QB|XMODEM|KERMIT|CAPTURE] |
download; without /PROTO:, CompuServe's protocol menu |
UPL name [/PROTO:...] [/TYPE:ASC|BIN] |
upload, then the title, keywords and description (465 characters at most) |
LIB n, M
|
another library; back to the forum |
The B and Quick B choices run the B Plus engine. The host sends ENQ, and the terminal's answer decides between Classic B, Quick B and B Plus. XMODEM and Kermit print CompuServe's start message and wait for a CR when the transfer is complete. Downloads count against the BBS's daily limits and ratios, the same as on the BBS itself. Entries look like this:
[72000,2]
BPLUS.ZIP/binary 08-Nov-26 8700 Accesses: 1
Title : B Plus for everyone
Keywords: BPLUS PROTOCOL
GO MAIL (or EASY, EASYPLEX) enters CompuServe Mail. It is the BBS's
private mail: what is sent here arrives in the BBS's mailbox, and the
other way round. A message is pending until it is read. Read messages
stay in the mailbox, as if saved, until they are deleted.
Mail starts in menu mode, as CompuServe's did. SET opens the Options
Menu, where option 2 changes the mode to PROMPT or COMMAND, and the
answer to Make changes permanent for future Mail sessions ? (Y or N) !
keeps it with the account. TAPCIS's setup script (PARAMS.SCR, run by
Alt-P) does exactly this, then set edit noline and set page off, which
are kept too. In command mode the prompt is Mail!.
| Command | Does |
|---|---|
READ [n|ALL|SAVED] |
read the pending messages (or the saved ones); Action! after each: CR next, DELETE, SAVE, REREAD, REPLY, FORWARD [address], DOWNLOAD [/PROTO:x]
|
SCAN [ALL|SAVED] |
one line each: 1 alice/Testing
|
COMPOSE [address] |
write (EDIT, ending with /EX), then Send to (Name or User ID):, Subject: and Send? (Y or N)!
|
UPLOAD [/PRO:B] [/TYP:ASCII|LATIN1] |
a message's text by a protocol, then the same questions (TAPCIS's UPL/PRO:B/TYP:ASCII MAIL%.TMP) |
DOWNLOAD [n|ALL|SAVED] [/PROTO:x] |
messages as one text file, by a protocol |
DELETE n |
delete a message |
ADDRESS |
the address book, and NAME for your Mail name (both for this session only) |
SET, SET MODE x, SET EDIT x, SET PAGE x, MODE
|
the options |
EXIT, T, GO x, OFF
|
leave Mail |
Addresses take CompuServe's forms: a BBS name, a User ID (72000,1), a
name and an ID (Sysop 72000,2, Sysop [72000,2]), or a name and a
network address after >. INTERNET:72000.1@compuserve.com is a member
here. Other Internet addresses, FAX, POSTAL, MCIMAIL, X.400 and MHS are
refused, with a message saying so. A FidoNet address (Bob@1:234/5) goes
out as netmail when the BBS is on FidoNet. An address ending in ; asks
for another, and a /R (return receipt) is accepted but not acted on.
A message reads like this:
Date: 08-Nov-26 12:40 UTC
From: alice [72000,1]
Subj: Testing
Hello from Mail.
GO CB enters the CB Simulator. Its channels are the BBS's chat rooms
cb-1 to cb-36, so callers in the BBS's own chat, or on IRC, can join a
channel too. A CB caller picks a handle, which can't be another member's
name, and a channel. After that, whatever they type is said on that
channel. A line from the tuned channel shows as (Handle) text, and a
line from a monitored channel shows as (17,Handle) text. Others see
the handle, and the BBS's other chat programs see the caller's name.
| Command | Does |
|---|---|
/TUN n |
tune to channel n (1-36) |
/MON 1,4, /UNM 1,4
|
listen to other channels too, or stop |
/STA |
how many are on each channel |
/UST [n] |
who is on CB: job, User ID, channel (17s scrambled, Tlk talking), node, handle |
/WHO |
the User ID of the last talker |
/HAN name |
change your handle |
/SCR key, /SMC key, /XCL key, /UNS
|
scramble what you send and unscramble what you get, one of the two, or neither |
/SQU handle |
squelch a handle (again to unsquelch) |
/TALK job |
talk with one caller alone (/EXIT back to the channel) |
/ROLL [3D6] |
roll dice for the channel |
/TIM, /JOB, /HELP
|
the time, your job number (the BBS node), the commands |
/EXI, /OFF
|
leave CB, or log off |
Scrambling works the way CompuServe's did. Everything you send goes out permuted by the key, and everything you receive is unpermuted with it, so only callers using the same key read each other.
| Done | Coming, in order |
|---|---|
The logon, ESC I, the menus and articles (internal/cis/pages.txt), GO, FIND, SET |
Forum JOIN and member options |
| Forums on the message areas, with the forum command language | |
The CompuServe B, Quick B and B Plus protocols (internal/xfer/cisb.go) |
B Plus resume (Tr) and file information (TI) |
| Libraries on the file areas, with B+ downloads and uploads | |
| CompuServe Mail on the BBS's private mail | A kept address book, binary mail |
| The CB Simulator on the chat rooms | Forum conferences (CO) |
| CIM's HMI service |
The research behind all this, with sources, is in docs/cis.
These pages are in the docs/wiki folder of the repository. Change them there, not here.
Start here
- Building
- Running
- Administration
- Sysop tools
- Configuration
- Configuration reference
- Databases
- Backups
- Customization
- Scripting
- Access levels
Callers
Features
- Message areas
- Writing messages
- Offline mail (QWK)
- Files and FTP
- File transfers
- Doors
- Newsgroups and NNTP
- FidoNet
- Chat and paging
- IRC
- IRC server linking
- AIM and ICQ
- AOL clients
- MSN Messenger
- MSN Classic (1995)
- MSN 2.x (1996)
- Yahoo! Messenger
- MRC
- News, weather and quotes
- Finger, gopher and Gemini
- Time: NTP, NTS and PTP
- DNS for callers
- Web forum
- Image boards
- HTTP API
More