Repository navigation
StyXmtr 0.7.0b13 (Beta)
Pre-releaseStyXmtr turns an ADALM-Pluto or Pluto Plus into a transceiver for QO-100 and for 2 m, 70 cm, 23 cm and 13 cm. This beta brings the user manual in six languages as PDF.
This beta works until 16 February 2027 (90 days after it was built). Two weeks before that, it reminds you to get the next one.
Download
| File | For | SHA-256 |
|---|---|---|
StyXmtr-0.7.0b13-win64-setup.exe |
Windows 10 and 11, 64 bit | b50169ce2bf00e53358fa0313cd1a8f680351ec17ae1111e6ccb97f07b22066a |
StyXmtr-0.7.0b13-macos-arm64.zip |
macOS 13.3 or later, Apple silicon (M1 and newer) | 392310f58ffef5ad2d6615f10a0d2d6c3a39d82c00f2e1f46776fe9edc1cc5d1 |
User manual
| Language | File |
|---|---|
| German | StyXmtr_Handbuch_0.7.0b13.pdf |
| English | StyXmtr_Manual_0.7.0b13.pdf |
| Spanish | StyXmtr_Manual_ES_0.7.0b13.pdf |
| French | StyXmtr_Manuel_FR_0.7.0b13.pdf |
| Italian | StyXmtr_Manuale_IT_0.7.0b13.pdf |
| Portuguese | StyXmtr_Manual_PT_0.7.0b13.pdf |
A build for the Raspberry Pi will follow.
New since 0.7.0b6
- New spelling: the program is now called StyXmtr. On the Mac the app is
StyXmtr.app. An update replaces the old version and keeps your settings. - Simplex on the direct bands: on 2 m, 70 cm, 23 cm and 13 cm the receiver is muted and the waterfall stops while you transmit. After you let go, reception stays muted for about half a second until the Pluto has sent everything.
- Power in dBm: the Power slider under Transmit and TX tune power now show dBm instead of percent. PO under Instruments shows the peak power at the Pluto output in dBm.
- Maximum power moved to Settings > TRX control, next to the connection and the converters. It takes effect when you connect.
- Address without "ip:": you can enter the Pluto's address as
192.168.2.1; StyXmtr adds theip:itself, for receiving and transmitting. - FM deviation can be switched between ±2.5 kHz (12.5 kHz channels) and ±5 kHz.
- Band plan strip also on 2 m, 70 cm, 23 cm and 13 cm.
- Control surfaces: almost every slider, choice and button can be reached through the rigctld output, for hardware controllers with knobs and keys. A PTT time-out keeps a controller from leaving the transmitter on.
- Installer language: if you pick a different language in the Windows installer than last time, StyXmtr switches to it as well.
Installation on Windows
StyXmtr talks to the Pluto through libiio, which the Windows version does not bring along. Install the Pluto driver with libiio 0.x first (libiio-0.26 setup from https://github.com/analogdevicesinc/libiio/releases).
- Run
StyXmtr-0.7.0b13-win64-setup.exe. It installs for your user only; choose "for all users" in the first dialog to install intoC:\Program Files. - Start StyXmtr. It first runs against a simulated transponder, so you can look around without opening a device.
- Choose your Pluto under Settings > TRX control: "Pluto on this PC" with its address (usually
192.168.2.1), or "PlutoTRX service on the network" with the address and key of the Raspberry Pi at the dish. StyXmtr remembers your choice for the next start.
Installation on the Mac
- Unpack
StyXmtr-0.7.0b13-macos-arm64.zipand dragStyXmtr.appinto your Applications folder. - StyXmtr is not notarized by Apple. The first time, right-click
StyXmtr.app, choose "Open" and confirm. After that it starts normally. - macOS asks for the microphone and for the local network. StyXmtr needs both: the microphone to transmit, the local network to reach the Pluto and the Raspberry Pi at the dish. If you declined by mistake, turn it back on under System Settings > Privacy & Security. If the local network still does not work, switch StyXmtr off and on again there and restart it.
- Choose your Pluto as on Windows, under Settings > TRX control.
For transmitting, connect the Mac to the network by cable if you can. Over Wi-Fi, the stream to the Pluto can get gaps.
If LogRunner is installed, StyXmtr reads its Pluto configuration (~/LogRunner/plutotrx/AdalmPluto.json) and never writes to it.
What is in this beta
- Receiving and transmitting: SSB, CW, AM, FM, WFM (receive only), USB-D and LSB-D with their own sound cards for data programs, and RADE V1 and V2 (FreeDV, experimental).
- QO-100: beacon lock with fine tracking, so LNB drift no longer moves the signal; the beacon and its offset over time in their own view.
- Direct bands: 2 m, 70 cm, 23 cm and 13 cm in simplex, and receiving from 70 MHz to 6 GHz as far as the Pluto covers it.
- Displays: large waterfall with S, dBm or dBµV scale, detail view around the VFO and of the audio, S-meter plot with maximum, average and minimum, light and dark design.
- Multimedia beacon: DX spots, bulletins and the live page qo100info.html in their own windows.
- Transmitting: voice keyer with eight memories, VOX with anti-VOX, microphone equalizer with presets, compressor, clipper and roger beep.
- Station: bands and converters (LNB oscillator), receive calibration, rigctld output for WSJT-X and control surfaces, and sharing the rig with LogRunner over the network.
The user interface and the manual are available in German, English, Spanish, French, Italian and Portuguese.