Skip to content

Firmware 0.9.0

Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 13 Oct 07:17
· 39 commits to main since this release

Firmware 0.9.0 for every supported reader. Nothing in this project has been tested on a
board yet.

Board Flash over USB (at 0x0) Update over Wi-Fi
LilyGo T5-2.13 t5-reader-0.9.0.bin t5-reader-0.9.0-ota.bin
LilyGo T5-4.7" S3 t5-47-reader-0.9.0.bin t5-47-reader-0.9.0-ota.bin
M5Stack M5PaperS3 m5papers3-reader-0.9.0.bin m5papers3-reader-0.9.0-ota.bin
M5Stack M5Paper m5paper-reader-0.9.0.bin m5paper-reader-0.9.0-ota.bin

Flash from a browser: Chrome or Edge, https://espressif.github.io/esptool-js/,
Connect, Flash Address 0x0, choose the .bin without -ota, Program.
T5-2.13: remove the SD card first. T5-4.7" / M5PaperS3: if no port shows up, hold BOOT,
press RST, release BOOT (M5PaperS3: see M5Stack's download-mode instructions).

Update over Wi-Fi (reader already running this firmware): Menu → Wi-Fi transfer,
open the page, "Update firmware", choose the -ota.bin for your board. A file for
the other chip (ESP32 vs ESP32-S3) is refused; between boards with the same chip, take care.

Diagnostic sketches for the T5-2.13 hardware checkpoints (docs/checkpoints.md):
t5-panel_tester-0.9.0.bin, t5-button_test-0.9.0.bin, t5-sd_test-0.9.0.bin,
t5-calibration-0.9.0.bin.

Books: drop an EPUB on the reader's Wi-Fi page (it typesets for the reader's screen),
or pixi run prep book.epub (--screen 4.7in for the 4.7" readers). See docs/usage.md.