Skip to content

Releases

PushFPS v2.9.7

Choose a tag to compare

@github-actions github-actions released this 16 Nov 17:00

What's new in 2.9.7

Smoother live play with frame generation. Live play could look less smooth than a recording of the same moment. With frame generation the output runs near your screen's refresh rate. In the old default display mode ("Automatic") a new frame could replace one that hadn't been shown yet, so now and then a generated frame was skipped and the next screen refresh repeated a frame. Recordings keep every frame, which is why they looked smoother.

The new Smooth frame pacing switch in the quick setup is on by default:

  • What it does: shows every frame at a screen refresh (V-Sync), asks for variable refresh (G-SYNC/FreeSync) where your screen supports it, and caps the output at your refresh rate. Every generated frame is shown once, so playing looks like the recording.
  • Delay: with variable refresh it adds almost none. Without it, a frame can wait up to one screen refresh.
  • Turning it off: the switch goes back to the lowest-latency mode.
  • Your own choice is kept: if you had already picked a display sync mode in Professional mode, 2.9.7 doesn't change it.

For the smoothest result:

  • turn on G-SYNC/FreeSync in your graphics driver;
  • play in fullscreen (F11);
  • set your screen to its highest refresh rate in Windows.

Also in this release (from 2.9.6): in comparison clips, the console side no longer freezes for a few seconds when the encoder briefly falls behind.

Tested how. In CI on Windows:

  • the build, unit tests, QML tests (including the new switch) and the install test.

The display modes it uses (V-Sync, variable refresh, output cap) are Veyra's existing, tested modes. Not yet tested on a real screen with a capture card: reports are welcome.

Windows Defender note. Defender may flag new PushFPS downloads as Trojan:Win32/Tecabans.STV!cl. This is a false positive from its cloud check on new, unsigned files, and it has been reported to Microsoft. Always check the zip against SHA256SUMS.txt on this page.

Credits. PushFPS is built on Veyra by Likely7. ANR frame generation is by Apex Compute.

Install

  1. Download PushFPS-2.9.7-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Built and tested automatically on Windows. Please report anything that doesn't work in Issues.

SHA-256: DEDA4F5167DFB55E5B1DB9AE8D746995F38292C482FA051DE7FAFC3776E77028 PushFPS-2.9.7-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: 788f9582830b21e7f1595e30c35552988e605d0fb260472ede40ed36bb45937d PushFPS-OBS-Plugin-1.2.0-win64.zip

Linux and macOS (preview)

PushFPS also runs on Linux and macOS with its own frame generation, Frame Pacing Repair and Live HUD
Lock (no vendor components). The packages (linux-x86_64 folder or AppImage, macos-universal app)
are attached to this release when their build finishes. See the README for what is tested.

Checking the download

SHA256SUMS.txt lists the SHA-256 of every file; *-components.txt lists the pinned components
this build was made from.

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.9.7 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.9.6

Choose a tag to compare

@github-actions github-actions released this 16 Nov 16:37

What's new in 2.9.6

Fixed: the console side of a comparison clip could freeze for a few seconds. When the recording encoder or the disk briefly fell behind, the recorder skipped whichever frame came next. The console side only moves on real console frames, and those arrive at a steady rhythm, so the skips could line up with them and hold the console side on one frame for seconds while the PushFPS side kept moving. Comparison clips now skip generated frames first and always keep one encoder slot free for the next real frame, so the console side keeps its true frame rate. Normal recordings are unchanged.

The recording log now also lists, per comparison clip, how many real and generated frames were recorded and whether any real frame was skipped.

Tested how. In CI on Windows:

  • the build, unit tests, QML tests and the install test;
  • a test of the new skip rule on WARP (Microsoft's software D3D12 device).

A simulation with the encoder only keeping up with two-thirds of the frames kept every real frame. Not yet tested with a capture card.

Also includes everything in 2.9.5:

  • the raw console picture on the console side;
  • styled badges.

Windows Defender note. Defender may flag new PushFPS downloads as Trojan:Win32/Tecabans.STV!cl. This is a false positive from its cloud check on new, unsigned files, and it has been reported to Microsoft. Always check the zip against SHA256SUMS.txt on this page.

Credits. PushFPS is built on Veyra by Likely7. ANR frame generation is by Apex Compute.

Install

  1. Download PushFPS-2.9.6-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Built and tested automatically on Windows. Please report anything that doesn't work in Issues.

SHA-256: D00BBC8943EF14800778C9E0FB610334C467897AB832401873403A495E904D6E PushFPS-2.9.6-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: b0c3560788f5af4219c268a38200b1a5f771b99903878f77faca72a1efc5931f PushFPS-OBS-Plugin-1.2.0-win64.zip

Linux and macOS (preview)

PushFPS also runs on Linux and macOS with its own frame generation, Frame Pacing Repair and Live HUD
Lock (no vendor components). The packages (linux-x86_64 folder or AppImage, macos-universal app)
are attached to this release when their build finishes. See the README for what is tested.

Checking the download

SHA256SUMS.txt lists the SHA-256 of every file; *-components.txt lists the pinned components
this build was made from.

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.9.6 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.9.5

Choose a tag to compare

@github-actions github-actions released this 16 Nov 13:59

What's new in 2.9.5

The console side of a comparison clip is now the raw console picture. Before, AI picture enhancement and upscaling were applied to both sides, so only frame generation differed. Now the console side shows the picture exactly as the console sends it: no AI enhancement, no upscaling, no colour changes, only scaled to the clip's size. The PushFPS side shows everything PushFPS adds: frame generation, AI enhancement and upscaling. This works in both layouts (split and side by side), in SDR and HDR.

Styled badges. The plain text labels are replaced by badges: a dark rounded badge with Console and its frame rate on the console side, and the PushFPS logo with its frame rate (outlined in PushFPS green) on the other side. They are blended onto the video with soft edges.

Tested how. In CI on Windows:

  • the build, unit tests, QML tests and the install test;
  • GPU tests on WARP (Microsoft's software D3D12 device) for the raw console side in both layouts, SDR and HDR, and for the badge blending in SDR and HDR.

The badge drawing itself (fonts, logo) is only checked when the app runs. Not yet tested with a capture card: reports are welcome.

Also includes everything in 2.9.3 and 2.9.4:

  • comparison clip layouts and length;
  • recordings that open in Vegas Pro;
  • sharper standard recordings.

Credits. PushFPS is built on Veyra by Likely7. ANR frame generation is by Apex Compute.

Install

  1. Download PushFPS-2.9.5-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Built and tested automatically on Windows. Please report anything that doesn't work in Issues.

SHA-256: 8C163F47035C2FDE0586B1D39C5DEAC91E89BDBCCE40A783F8D36518DE720721 PushFPS-2.9.5-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: f10c9f23f37ca9cc1d1bc8272a3be6bc6987ad0dc6c61331402e02e96ff9ab4c PushFPS-OBS-Plugin-1.2.0-win64.zip

Linux and macOS (preview)

PushFPS also runs on Linux and macOS with its own frame generation, Frame Pacing Repair and Live HUD
Lock (no vendor components). The packages (linux-x86_64 folder or AppImage, macos-universal app)
are attached to this release when their build finishes. See the README for what is tested.

Checking the download

SHA256SUMS.txt lists the SHA-256 of every file; *-components.txt lists the pinned components
this build was made from.

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.9.5 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.9.4

Choose a tag to compare

@github-actions github-actions released this 16 Nov 12:56

What's new in 2.9.4

Comparison clip settings are easier to find. The Comparison clip tile now opens its dialog even when nothing is playing, so you can choose the layout (split or side by side) and the length (10, 15, 30 or 60 seconds) before you start the capture card. The same two choices are also under Settings, Playback, next to the other recording settings. Recording itself still needs a picture on screen.

Also includes everything in 2.9.3:

  • comparison clips in two layouts, with frame-rate labels on every clip (HDR included);
  • recordings that open in Vegas Pro and other editors;
  • sharper standard recordings.

Tested how. QML tests and the install test, in CI on Windows. No engine code changed since 2.9.3.

Credits. PushFPS is built on Veyra by Likely7. ANR frame generation is by Apex Compute.

Install

  1. Download PushFPS-2.9.4-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Built and tested automatically on Windows. Please report anything that doesn't work in Issues.

SHA-256: 3318B8FE70DB5083A37E5FABDB9DE5FCC56684C5F91655305EBB539FC726B01B PushFPS-2.9.4-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: c6401b76579efad326e9e7fa4f6bc623595542f47c1d6e11228209af067b7417 PushFPS-OBS-Plugin-1.2.0-win64.zip

Linux and macOS (preview)

PushFPS also runs on Linux and macOS with its own frame generation, Frame Pacing Repair and Live HUD
Lock (no vendor components). The packages (linux-x86_64 folder or AppImage, macos-universal app)
are attached to this release when their build finishes. See the README for what is tested.

Checking the download

SHA256SUMS.txt lists the SHA-256 of every file; *-components.txt lists the pinned components
this build was made from.

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.9.4 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.9.3

Choose a tag to compare

@github-actions github-actions released this 16 Nov 12:15

What's new in 2.9.3

Comparison clips in two layouts. The Comparison clip tile now opens a small dialog:

  • Split: one picture cut down the middle, the console's own frame rate on the left, PushFPS on the right.
  • Side by side: the whole picture twice, each at half size, the console's frame rate on the left and PushFPS on the right.
  • Length: 10, 15, 30 or 60 seconds.

Frame-rate labels on every clip. Both sides are labelled at the top (for example Console · 30 FPS and PushFPS · 120 FPS). HDR clips used to have no labels or divider line, and a label too wide for its half was left out. Both now always appear, drawn in HDR too and scaled down to fit. With XeSS frame generation PushFPS now says before recording that XeSS frames can't go into a comparison clip, instead of saving a clip where both sides look the same.

Recordings open in Vegas Pro and other editors. When a recording finishes, the MP4 is rewritten as a standard MP4, without re-encoding. While recording it stays in the crash-safe format, so a crash still keeps what was recorded.

Sharper recordings. The standard recording settings now use about twice the bitrate (about 37 Mbps for 1080p60, 66 Mbps for 1440p60, 150 Mbps for 4K60 with H.264). Keyframes and fast motion get more room, and flat areas such as skies get more detail. A fixed bitrate under Settings, Playback still applies as before.

Tested how. In CI on Windows:

  • unit tests, including writing a fragmented MP4 like a recording, finishing it and reading it back;
  • QML tests for the new dialog;
  • GPU tests of both layouts in SDR and HDR on WARP (Microsoft's software D3D12 device);
  • the install test.

Not yet tested with a capture card or on an RTX card: reports are welcome.

Credits. PushFPS is built on Veyra by Likely7. ANR frame generation is by Apex Compute.

Install

  1. Download PushFPS-2.9.3-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Built and tested automatically on Windows. Please report anything that doesn't work in Issues.

SHA-256: 291AE09F5C0D68E22EC177BC0EC03D041AD923A7196E710037679D900F50D4C5 PushFPS-2.9.3-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: daac9a2ca3c5a22c1027843e4cfc80bca4389b640564464e6e000d591907f2c3 PushFPS-OBS-Plugin-1.2.0-win64.zip

Linux and macOS (preview)

PushFPS also runs on Linux and macOS with its own frame generation, Frame Pacing Repair and Live HUD
Lock (no vendor components). The packages (linux-x86_64 folder or AppImage, macos-universal app)
are attached to this release when their build finishes. See the README for what is tested.

Checking the download

SHA256SUMS.txt lists the SHA-256 of every file; *-components.txt lists the pinned components
this build was made from.

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.9.3 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.9.2

Choose a tag to compare

@github-actions github-actions released this 16 Nov 10:01

What's new in 2.9.2

NVIDIA optical flow is built in. On NVIDIA RTX graphics cards, PushFPS can now use NVIDIA's own optical flow
for motion estimation, as Veyra does, instead of AMD FidelityFX optical flow. Its two interface headers come from
a private build secret: no NVIDIA SDK file is in the repository or the download. Other graphics cards keep using
AMD FidelityFX optical flow, and NVIDIA Video Frame Generation is unchanged (it has its own optical flow).

Also includes everything in 2.9.1: the PS5 pairing fix and the full going-live upload note.

Tested how. Built with NVIDIA optical flow, unit tests, QML tests, going-live tests and the install test, in CI
on Windows (no NVIDIA graphics card there). Not yet tested on an RTX card: reports are welcome.

Credits. PushFPS is built on Veyra by Likely7. ANR frame
generation is by Apex Compute.

Install

  1. Download PushFPS-2.9.2-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Built and tested automatically on Windows. Please report anything that doesn't work in Issues.

SHA-256: 8847DC440C85BC716DC8FFD6E3CA7EB8EA6AF998848E2A19671517C848373281 PushFPS-2.9.2-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: 6ecdce471d2832b4452897ed50dbb44254e30795e014943aab0fb2efddd44b91 PushFPS-OBS-Plugin-1.2.0-win64.zip

Linux and macOS (preview)

PushFPS also runs on Linux and macOS with its own frame generation, Frame Pacing Repair and Live HUD
Lock (no vendor components). The packages (linux-x86_64 folder or AppImage, macos-universal app)
are attached to this release when their build finishes. See the README for what is tested.

Checking the download

SHA256SUMS.txt lists the SHA-256 of every file; *-components.txt lists the pinned components
this build was made from.

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.9.2 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.9.1

Choose a tag to compare

@github-actions github-actions released this 16 Nov 08:56

What's new in 2.9.1

Fix: PS5 pairing lost the Account ID. In PS5 streaming, typing the Account ID (or the console's address)
and clicking Pair and save straight away didn't save what you typed: pairing failed and the fields emptied.
Both fields now save as you type. Thanks to the Reddit user who reported it.

This is also what PS5 controller control needs: pair once in PS5 streaming, then turn it on in the capture
card settings to play with any controller Windows sees (Xbox, Switch Pro, 8BitDo...) while the picture comes from
your capture card.

Fix: the going-live upload note was cut off. The note with the upload bandwidth you need is now shown in
full.

Tested how. Built, unit tests, QML tests (including a new test that types the Account ID and clicks Pair and
save
), the going-live tests and the install test, in CI on Windows. Pairing with a real PS5 has not been
re-tested by us since the fix; the change only affects how the two fields save their text.

Credits. PushFPS is built on Veyra by Likely7. ANR frame
generation is by Apex Compute.

Install

  1. Download PushFPS-2.9.1-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Built and tested automatically on Windows. Please report anything that doesn't work in Issues.

SHA-256: BC4D4F4ECEE1F5EC3AE4D3616662D2DEB1CF563EF30CC90742938832CBC05030 PushFPS-2.9.1-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: 8a4859df8dbf6a2904cec93fc15c558b4fc67becb8e0b31130eb5c8afcfbee44 PushFPS-OBS-Plugin-1.2.0-win64.zip

Linux and macOS (preview)

PushFPS also runs on Linux and macOS with its own frame generation, Frame Pacing Repair and Live HUD
Lock (no vendor components). The packages (linux-x86_64 folder or AppImage, macos-universal app)
are attached to this release when their build finishes. See the README for what is tested.

Checking the download

SHA256SUMS.txt lists the SHA-256 of every file; *-components.txt lists the pinned components
this build was made from.

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.9.1 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.9.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 04:38

What's new in 2.9.0

Go live from PushFPS. Stream the boosted picture, frame generation and sound included, straight to Twitch,
YouTube, Kick, TikTok, Facebook Live, Trovo or any RTMP/RTMPS server, without OBS. Add up to eight outputs and
stream to several platforms at once: one encode feeds them all, so a second platform costs upload bandwidth, not
graphics card time. Server lists and recommended limits come from OBS Studio; the bitrate follows the strictest
platform you stream to. Stream keys are encrypted for your Windows user, never shown again and never written to
logs. Each output reconnects on its own when the connection drops, and the dialog shows each one's state,
bitrate, dropped frames and reconnects. Open it with Go live in the quick setup.

Optimise for my PC, rebuilt.

  • Tests every frame generation method your PC can run (DLSS, NVIDIA VFG, ANR, FSR 4/3.1, XeSS, AMD FRC), not
    just the first few, and lists the ones it skipped with the reason.
  • Choose a goal: Balanced, Lowest latency, Smoothest or Best picture.
  • Targets your monitor's own rate on 144, 165 and 240 Hz screens when the game divides into it evenly.
  • Reports PC processing latency, its 95th percentile and frame-time jitter for every combination.

Live HUD Lock tells you what it does. The quick setup now says whether HUD Lock is running, waiting for
frame generation, or can't run with the current method (XeSS).

Frame Pacing Repair, hardened. Clock jumps and stalls restart the fit without reordering frames; a fuzz test
of 400 random sequences now runs in CI.

Safer ANR install. Install from download lists the archive before unpacking, refuses unsafe paths, links
and unexpected file types, installs into a new folder and swaps it in (the old one comes back if anything fails),
and shows the archive's SHA-256.

Linux and macOS (preview). A separate, smaller PushFPS with its own frame generation, Frame Pacing Repair
and Live HUD Lock on Vulkan, OpenGL or Metal: no NVIDIA, AMD or Intel components needed. Linux as an AppImage or
.tar.gz, macOS as one app for Apple Silicon and Intel. Recording and going live are Windows-only for now.

Portable and checkable. Every release now carries SHA256SUMS.txt and a list of the exact pinned components.
Install-PushFPS.cmd -InstallDir <folder> -NoShortcuts keeps PushFPS and its settings in one folder.

Tested how. Windows: built, unit and GPU (WARP) tests, QML tests, install and start test, and the going-live
tests against a local RTMP and RTMPS server (connect, send, server restart and reconnect, key never in logs), all
in CI. Not yet tested by a person streaming to the real platforms with a capture card: reports are welcome.
Linux/macOS: core tests with sanitizers, self-tests at 60 and 120 FPS, a GPU check (the generated frame
matches the processor reference at 67-69 dB on OpenGL and Metal) and a clean Ubuntu container, in CI; not yet
tested on a person's machine with a capture card.

Credits. PushFPS is built on Veyra by Likely7. ANR frame
generation is by Apex Compute. Streaming service data from OBS Studio
(GPL-2.0-or-later).

Install

  1. Download PushFPS-2.9.0-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Built and tested automatically on Windows. Please report anything that doesn't work in Issues.

SHA-256: F3E53BCED64B85600509D69191CC0F4EC88B9158C5C8BCF90A62293EB9CBE819 PushFPS-2.9.0-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: 13239a1ed80834fc96f368e01d6d1c9f7027b97cc3ad4fd5fa762b9db21f42f3 PushFPS-OBS-Plugin-1.2.0-win64.zip

Linux and macOS (preview)

PushFPS also runs on Linux and macOS with its own frame generation, Frame Pacing Repair and Live HUD
Lock (no vendor components). The packages (linux-x86_64 folder or AppImage, macos-universal app)
are attached to this release when their build finishes. See the README for what is tested.

Checking the download

SHA256SUMS.txt lists the SHA-256 of every file; *-components.txt lists the pinned components
this build was made from.

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.9.0 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.8.0

Choose a tag to compare

@github-actions github-actions released this 16 Nov 01:14

What's new in 2.8.0

Two pieces of PushFPS's own tech, made for console pictures.

Frame Pacing Repair. Many console games locked to 30 FPS don't deliver their frames evenly: some stay on
screen for 17 ms, others for 50 ms. The frame rate is right, but the motion judders, and frame generation keeps
the judder. PushFPS now puts every real frame back on an even grid before generating frames, so a 17/50 ms game
becomes 33/33. It only acts on uneven delivery of a locked frame rate, restarts after a stall, and leaves games
whose frame rate genuinely varies alone. A frame is shown at most one capture refresh later. Turn it on in the
quick setup; it shows how much of the picture it is re-timing.

Live HUD Lock. Frame generation drags still text, crosshairs and health bars along with the moving
background. Live HUD Lock finds those pixels on every frame, on your graphics card, and keeps the console's own
pixels there in the generated frames, with no boxes to draw. A pixel is released the moment it moves. Works with
DLSS, ANR, NVIDIA VFG, FSR and AMD FRC frame generation.

Also: the README, store art and promo graphics use the PushFPS colours and logo again; the Sunset City look
stays the app and website default for now.

Credits. PushFPS is built on Veyra by Likely7. ANR frame
generation is by Apex Compute.

Install

  1. Download PushFPS-2.8.0-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Preview build. Built and start-tested automatically on Windows; not yet tested with a real capture card and GPU. Please report what works and what doesn't in Issues.

SHA-256: A77E423070B8C0F5367ED4D57EB895636979F8EEF13638032DEEAF74AAD9739B PushFPS-2.8.0-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: 7577bc0c0439c3285798d7f36970a6b448ba77689b65825e2837d4829fa88d28 PushFPS-OBS-Plugin-1.2.0-win64.zip

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.8.0 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.

PushFPS v2.7.0

PushFPS v2.7.0 Pre-release
Pre-release

Choose a tag to compare

@github-actions github-actions released this 15 Nov 22:47

What's new in 2.7.0

Adaptive multiplier. Console games rarely hold one frame rate: a 30 FPS game dips to 25, a 40 FPS mode
wanders between 35 and 45, Elden Ring on Switch 2 sits anywhere from 30 to 40. Turn on Adaptive multiplier in
the quick setup and the multiplier becomes a ceiling: PushFPS measures the game's frame rate from the capture
card picture and, for every pair of real frames, uses the multiplier whose output lands closest to your target.
At 120 FPS: 30 FPS → 4X, 40 FPS → 3X, 36 FPS → 3X, 33 FPS → 4X. A change waits half a second so it never flickers,
and the quick setup shows what it is doing ("Now 3×: game 38 FPS → about 114 FPS"). It is the same idea as
NVIDIA's DLSS 4.5 Dynamic Multi Frame Generation, based on the console's frame rate, and it works with DLSS, ANR
and NVIDIA VFG frame generation.

Nintendo Switch and Switch 2 presets. 28 new game presets for games that run at 30 FPS: Switch games that
stay at 30 FPS on Switch 2 (Age of Calamity, Pokémon Legends: Arceus, Breath of the Wild, Xenoblade Chronicles X,
Monster Hunter Rise, The Witcher 3 and more) and Switch 2 ports (Cyberpunk 2077, Hogwarts Legacy, Final Fantasy VII
Remake and Rebirth, Star Wars Outlaws, Elden Ring and more). The list filters by console, one click sets the
console, frame rate and target, and games that dip get the adaptive multiplier. Nintendo Switch is now in the
console list too.

Fix: 120 FPS targets with a 30 FPS game. With an output cap of 120 FPS the engine worked out the multiplier
from the capture card's 60 Hz signal instead of the game's 30 FPS, and could run 2X (60 FPS) instead of 4X.
It now uses the measured game frame rate.

Credits. PushFPS is built on Veyra by Likely7. ANR frame
generation is by Apex Compute.

Install

  1. Download PushFPS-2.7.0-win64.zip below and extract it.
  2. Double-click Install-PushFPS.cmd.

The installer downloads Veyra's official runtime package (about 750 MB, NVIDIA or AMD to match your
graphics card) from Veyra's GitHub release, checks its SHA-256, and installs PushFPS with Start menu
and desktop shortcuts. No administrator rights needed.

Preview build. Built and start-tested automatically on Windows; not yet tested with a real capture card and GPU. Please report what works and what doesn't in Issues.

SHA-256: B3368383C1D1817B6921C9889980E21EA250CD33751A8D5538B7B2AE52D0EB81 PushFPS-2.7.0-win64.zip

OBS Studio plugin

PushFPS-OBS-Plugin-1.2.0-win64.zip adds a PushFPS source to OBS Studio 28+ (Windows): your PushFPS picture,
frame generation included, in any scene. Extract it and double-click Install-PushFPS-OBS.cmd.

SHA-256: c53b54d5e673ccc92fb410eab74108153e99074d087fa7c076f26c65acc25a70 PushFPS-OBS-Plugin-1.2.0-win64.zip

License and source

PushFPS is free software under the GNU GPL-3.0 and comes with no warranty. It is a modified version of
Veyra by Likely7 (see NOTICE.md). Corresponding source:
the v2.7.0 tag of this repository (also attached by GitHub as Source code); the build recipe is
.github/workflows/build-windows.yml at that tag. The streaming libraries built into PushFPS
(chiaki-ng, AGPL-3.0 with the OpenSSL exception; moonlight-common-c, GPL-3.0; and the vcpkg recipes of
OpenSSL, Opus, SDL3, libdatachannel and the other static libraries) are in the attached
streaming-source archive.