Skip to content

Releases

Create: Distant Stock v0.3.64 · Join Confirmation & Remote Stock Recovery

Choose a tag to compare

@EVGA2048 EVGA2048 released this 28 Oct 14:15

Create: Distant Stock v0.3.64 — 加入提示反复出现 / 跨服库存空白修复

现象与修复

加入码输入正常,却反复提示“等待期间手持终端或其网络已改变”

原 0.3.63 的判断依赖 ItemStack 对象引用相同(held != pending.terminal())。Minecraft 可在同步手持物品时重新实例化 ItemStack,不代表玩家换了终端。现在终端第一次加入前写入独立的持久 DistantStockJoinIdentity UUID;收到跨服确认时核对 UUID + 原远仓网络身份,而不是 Java 对象地址。更换另一台终端或真正修改网络依然会取消旧请求。相同终端/代码在短窗口内合并请求,但 15 秒之后允许再次发起以便恢复异常排队。旧/重复确认不再重投或刷屏。

VL4 有真实仓库和物品,但 ES2 终端显示空

跨服库存以前会在被请求仓库冷缓存时立即回应 RETRY,从而触发持久队列重试而不一定及时得到库存第一页。现在最多缓存 32 条等待的库存查询,按原有限流的 StockScanner 节拍扫描本地仓库;缓存一旦准备好,回复本次查询,避免产生不必要的 RETRY 或对每次面板打开执行全库扫描。等待超过 30 秒才交还给 Transerver 重试。首次空快照仅保留约 5 秒(之前可保留 15 分钟),避免空仓状态掩盖后来加载到的库存。终端对远端无库存的提示改为“远端库存同步中,或对端暂无可用库存”,不再确定地宣称仓库为空。

/distantstock stock 增加“等待本地库存采样的跨服查询”数量,近期查询记录也标注“等待采样”或实际发送的页/行数。

不变的入网规则

  • 加入码或网络 8 位 ID 只让终端加入远仓网络;不把 Create 仓库自动塞进去。
  • 必须手持已加入远仓网络的便携终端,右键已绑定 Create 网络的远仓港,由 Create 管理员纳入该仓库。
  • 仓库列表只显示属于当前远仓网络的仓库,不可直接点击未入网仓库来自动纳入。
  • v0.3.62 已经误绑定的仓库不会擅自删除;请备份后由其 Create 管理员核查。

部署与验收

  1. ES2、VL4 服务端与配套客户端均更新 DistantStock 0.3.64。Transerver 保持 0.1.1,独立 Router 不变。关闭服并备份世界、网络目录、身份和持久消息队列,不要删除 inbox/outbox/dead-letter。
  2. ES2 用手持便携终端输入 VL4 的 8 位 ID 或加入码,保持手持直到收到确认;检查无反复的“终端变化”提示。切换终端应正确取消本次请求。
  3. VL4 先确保 Create 仓库通过右键远仓港合法入网,且 Create 原生仓管确实能看到库存。
  4. ES2 选择远程仓库并观察分页填充。ES2 /distantstock stock 应能看到正在查询的网络、缓存条数和答复年龄;VL4 /distantstock stock 应记录最近收到的查询、采样等待数量和发出的库存页。
  5. 然后用少量物品测试 ES2 发请求、VL4 打包、跨服发送、ES2 收货。此最后环节需要真实线上验收。

验证范围

  • 302/302 Minecraft GameTests 通过,含 ItemStack 重建后仍能成功绑定相同终端、真正替换终端仍拒绝、旧加入确认静默消费、冷缓存等待采样、空快照过期后可重新看到实际库存。
  • Wire codec / AsyncSender / 包裹所有权 / 其它针对性资源检查通过。
  • 真实 ES2↔VL4 物品交付尚未现场验证,不能将开发环境 GameTest 通过视为线上成功。

Create: Distant Stock v0.3.63 · Dock-Only Enrollment & Short-ID Joins

Choose a tag to compare

@EVGA2048 EVGA2048 released this 28 Oct 13:22

v0.3.63 — Explicit Distant Dock Enrollment, 8-Character Network ID Joins, Faster Handshake

Reverts unsafe behavior introduced in v0.3.62. Creating or joining a Distant Stock network must never enroll a Create logistics network merely because the terminal previously selected it, nor should the warehouse picker list or enroll local warehouses outside the joined network.

Fixed enrollment and isolation

  • The only interactive warehouse enrollment path is to hold a portable requester already joined to a formal Distant Stock network and right-click a physical Distant Dock already bound to the intended local Create warehouse.
  • Verify the actual local Create warehouse identity, Create administrative permission, valid Distant Stock membership and no pre-existing membership in a different formal network before attaching.
  • Both the command (/distantstock network create) and GUI network creation create only the outer network; cross-server join-code requests and responses grant terminal membership only. Stale 0.3.62 messages that try to enroll a warehouse are rejected.
  • Warehouse lists and server-authoritative selection handlers accept only members of the terminal's current formal Distant Stock network. Joining a different outer network clears a stale selected warehouse; the server no longer queries its unrelated inventory.
  • Leaving a local Create warehouse by command requires Create administrator privileges.

Dual join codes and responsiveness

  • The first 8 hexadecimal characters of a network UUID are a valid join code in XXXXXXXX or XXXX-XXXX form (case-insensitive), in addition to the existing random invitation code. Short-ID collisions with existing codes are guarded; ambiguous codes are rejected.
  • If the discovered network catalog identifies exactly one authority for that UUID prefix, send the request directly to that peer, without broadcasting to unrelated nodes.
  • Join request and acceptance tasks jump ahead of bulk inventory/telemetry tasks in the bounded async outbound queue. A congested durable Router can still delay delivery; this is an acceleration, not a fixed-time guarantee.

Security notice: The eight-character ID is public in network listings and UI. Once accepted as a join credential, resetting the original random invitation code does not revoke the public ID shortcut. This is intentional per the requested behavior and is unsuitable for private invite-only access.

Upgrade and verification

  • Update both ES2 and VL4 servers and all matching modded clients to Create-Distant-Stock-0.3.63+mc1.21.1.jar.
  • Leave Transerver 0.1.1 unchanged on game servers and standalone Router.
  • Keep all worlds, configurations, node identity, queues, escrow and parcel data. Do not wipe inbox/outbox/dead-letter folders. Existing 0.3.62 mis-enrollments are intentionally not auto-detached to avoid destroying legitimate saved memberships. Inspect each warehouse and detach an incorrect local membership only as its Create owner, after backup.
  • Verify network join -> terminal only -> right-click correctly bound dock as the Create administrator -> warehouse appears in the correct network and no other warehouses appear. Then verify remote inventory and a small real parcel delivery on ES2/VL4.

Tests

  • 300/300 required GameTests passed: actual Distant Dock owner interaction, unauthorized stranger denial, strict warehouse listing, command and GUI separation of network from warehouse membership, rejected stale member-style join messages, eight-character ID and random-code resolution, stale terminal warehouse cleanup.
  • Wire codec, async sender priority, ownership and focused resource checks passed.
  • Online ES2/VL4 actual cargo delivery has not been verified in this local development environment. Historical unrelated Ponder stale NBT verification issue remains.

The ZIP includes both JARs, SHA-256 sums, and detailed Chinese deployment notes (UPDATE.md).

Create: Distant Stock v0.3.62 · Network Join & Bounded Stock Paging

Choose a tag to compare

@EVGA2048 EVGA2048 released this 28 Oct 12:37

v0.3.62 — End-to-End Join, Warehouse Membership, Delivery Addresses & Bounded Stock Paging

This update fixes the gaps left after v0.3.61 catalog discovery. Seeing a remote network name no longer implies a usable warehouse: joins, local warehouse enrollment, announcements, stock queries, order destinations and UI updates now share the same formal Distant Stock network scope.

Joining and warehouse membership

  • A portable terminal with no local Create frequency can join a VL4 network using the join code from ES2, in-game or with /distantstock network join-terminal <code> or /distantstock network join <code>.
  • Join responses can survive queue congestion (5-minute acceptance window; 6-minute durable message lifetime), and the terminal's accepted network ID is persisted after chat-command joins too.
  • New networks enroll the selected local Create warehouse when the player has Create administrator permission. Existing empty networks can be repaired without deletion: open the network's warehouse picker and select a local 未加入 · 点击纳入本网络 warehouse, or use /distantstock network enroll with the appropriate terminal.
  • /distantstock doctor / network now show local and remote warehouse counts and outstanding joins.
  • Receiving addresses matter for actual orders: the group create command now creates a group in the player's selected formal Distant Stock network instead of silently placing it in Legacy. dock send-to uses the same scope when resolving a target.

Large inventories: bounded, shared and paged

  • Stock wire v2: max 128 item rows/page, max 48 KiB per result, max four new remote queries per two-second beat.
  • Shared server-side cache of Create inventories; only watched warehouses are scanned, at most two large scans/beat, not on the UI open event.
  • Client screen receives at most 128 rows per packet; global UI page budget eight packets per two seconds with round-robin fairness and incremental progress.
  • A single network snapshot may contain up to 32,768 item types; the safety cap is reported in diagnostic logs if exceeded rather than creating an unbounded payload.
  • Capability stock-pages-v2 is required, preventing mixed-version nodes from endlessly exchanging incompatible stock packets. Pending v1 queries can still receive small v1 responses during upgrades.

Deployment

Update both ES2 and VL4 game servers and the matching client mods to Create-Distant-Stock-0.3.62+mc1.21.1.jar. Continue to use Transerver 0.1.1 on both game servers and the separate Router. Preserve node identity, world data, join codes, configs, escrow and durable queues; do not delete old inbox/outbox/dead-letter files.

  1. VL4: check /distantstock network reports at least one local Create warehouse, not just a network name. Enroll an existing local warehouse from the terminal's picker if needed.
  2. ES2: join the VL4 network code with a portable terminal; select the actual VL4 warehouse and allow the bounded stock pages to populate.
  3. ES2: create a receiving address in the joined network, attach a powered receiving Distant Dock, then send a small test order. Compare /distantstock doctor, /distantstock stock, parcel traces and receipt status on both servers.

Verification and limits

  • 298/298 required GameTests passed, including an actual local Create network enrollment/announcement regression, 5,000 stock rows across bounded pages and client chunks, receiving address scope, delayed join confirmation and duplicate-safe receipt handling.
  • Wire codec, sender, ownership, assets and focused verification tasks passed.
  • Also launched two real NeoForge dev servers attached to an independent Transerver Router; both recognized each other's protocol and transported control-plane traffic. This dev environment contains thousands of historical queued/dead-letter items and no real player-created formal warehouse, so a real physical ES2/VL4 order and parcel delivery has not yet been validated. Live delivery acceptance should be done after installing the build.
  • Unrelated historical Ponder scene stale-NBT verification issue remains outside this update.

The ZIP includes both mod JARs, SHA-256 checksums and detailed Chinese deployment instructions (UPDATE.md).

Create: Distant Stock v0.3.61 · Network Catalog Recovery

Choose a tag to compare

@EVGA2048 EVGA2048 released this 28 Oct 11:49

v0.3.61 — Cross-Server Network Discovery Recovery

Addresses cases where a distant network created on VL4 does not appear in /distantstock network on ES2 although Transerver reports a compatible protocol.

Fixes

  • Delayed v5 legacy announcements no longer erase an earlier v6 catalog.
  • Durable announcement snapshots older than the newest accepted snapshot are ignored.
  • Coalescing now uses a fingerprint of the actual directory state: new, renamed or changed networks send a fresh catalog even while a prior announcement awaits its receipt.
  • Transport APPLIED receipts are issued only after announcement state is applied on the Minecraft game thread; processing failures return RETRY.
  • /distantstock doctor now reports local and per-peer catalog counts and distinguishes missing v6 announcements from missing peer support.

Upgrade

  • Use Create-Distant-Stock 0.3.61 on ES2, VL4 and relevant clients.
  • Continue using Transerver 0.1.1 on both game servers and the separate Router.
  • Preserve existing worlds, configuration, node identities, network codes and all durable message queues. There is no need to erase the existing inbox or dead-letter entries.
  • On both servers, inspect /distantstock doctor Catalog diagnostics and /distantstock network after the normal maintenance deployment.
  • Historical dead letters or chain faults can still independently cause Doctor FAULT.

Verification

  • 295/295 required Minecraft GameTests passed; wire, async sender, parcel ownership and assorted resource checks passed.
  • Real production ES2/VL4 pairing is still to be validated after deployment.
  • Unrelated existing Ponder diagnostic stale-NBT verification issue is not addressed here.

The ZIP also contains SHA-256 sums and Chinese update instructions.

Create: Distant Stock v0.3.60 · Cross-Server Discovery & Fair Queues

Choose a tag to compare

@EVGA2048 EVGA2048 released this 28 Oct 11:13

v0.3.60

This release fixes cross-server discovery and durable transport behavior when one or more Transerver nodes are offline.

Network discovery

  • Fix remote Distant Stock networks not appearing after both peers report protocol compatibility.
  • Preserve the catalog-bearing announcement sent immediately after the capability handshake instead of coalescing it with the earlier legacy announcement.
  • Keep join codes private while advertising public network identities and names to compatible peers.
  • Allow owners to recover an existing network's join code with /distantstock network code <name>.

Transerver reliability

  • Rotate durable outbox, inbox, Router and receipt queues fairly, so one offline node cannot occupy the fixed batch prefix and block online nodes.
  • Bound message counts, batch bytes, HTTP response bytes and Router worker queues.
  • Move Distant Stock transport persistence off the Minecraft server thread.
  • Keep parcel custody in escrow until the outgoing message has been durably accepted.
  • Coalesce periodic control messages and apply per-peer backlog limits without deleting durable parcel messages.

Upgrade

  • Install Create-Distant-Stock-0.3.60+mc1.21.1.jar on both game servers and matching clients.
  • Install Transerver-0.1.1.jar on both game servers and the standalone Router.
  • Remove older JARs, keep the existing identities/configuration/data directories, then start the Router before the game servers.

Validation

  • 295 / 295 required GameTests passed.
  • 39 / 39 Transerver tests passed, including real HTTP multi-node routing, offline backlog fairness, concurrency and packet-size limits.
  • Async submission, wire codec and parcel ownership checks passed.
  • Minecraft 1.21.1 / NeoForge / Create 6.0.10.

Create: Distant Stock v0.3.56 · Cache Recovery & Diagnostics

Choose a tag to compare

@EVGA2048 EVGA2048 released this 13 Oct 13:25

v0.3.56

This release focuses on making large Create chain-conveyor logistics networks recover cleanly under congestion.

Diagnostics & cache mitigation

  • Fix stopped-chain diagnostic retry storms and stale fault states.
  • Fix cache takeover restore ordering against Create 6.0.10 address-wide route deregistration.
  • Add FIFO cache waiting for more simultaneous faults than available Cache Frogports.
  • Allow partially draining caches to accept later faults while preserving each parcel's own address.
  • Scale normal Ping concurrency for large Frogport networks while keeping small networks at the historical limit.
  • Immediately prime temporary cache routes across the known chain graph instead of waiting for Create's hop-by-hop route convergence.
  • Purge primed takeover routes on recovery to avoid ghost cache routes.
  • Let spare Cache Frogports share one hot fault when no other fault is waiting; new faults still take priority.

Ponder

  • Fix diagnostic chain scene topology and Frogport attachment.
  • Fix lingering belt items in the delivery scene.
  • Add scripted chain parcel movement / Frogport receive-send animations for Ponder client worlds.

Validation

  • 287 / 287 required GameTests passed on the release commit.
  • Minecraft 1.21.1 / NeoForge / Create 6.0.10.

Create: Distant Stock v0.3.55-test1 · 诊断蛙港断路修复测试版

Choose a tag to compare

@EVGA2048 EVGA2048 released this 12 Oct 03:44

诊断蛙港断路漏检修复(测试版)

修复等待发包期间断路后,目标被排除出下一轮检测名单的问题;同时修复等待回包期间断路后,超时处理丢失原接收蛙港、影响缓存接管与恢复的问题。

  • 已发现蛙港的位置和业务地址随世界存档保存,断路或区块未加载不会删除记录。
  • 轮询、超时处理和恢复探测统一使用保存的名单,接回后通过 Ping 解除故障和缓存接管。
  • 已加载且确认拆除、改址或关闭收包的蛙港退出旧地址检测,避免残留告警。

升级说明

JAR 内版本为 0.3.55,本次以 v0.3.55-test1 Pre-release 发布,供 Tomori 实机复测。

旧版没有保存蛙港位置。升级时已经断开的分支,需要接回锁链让新版发现一次;不用拆蛙港、改地址或重新绑定。原本连通的分支会自动发现。新版发现过的目标,之后断路或重启都会保留。

建议复测

  1. 等待下一次发包时断开分支:地址不应从名单消失,应最终报超时。
  2. Ping 发出后、回包前断开分支:有空闲缓存蛙港时应接管业务地址,接回后应恢复并退出接管。
  3. 断路状态保存退出再进入:目标仍应参与探测。
  4. 拆除、改址或关闭接收蛙港收包:旧地址不应留下永久告警。

验证

  • 同一回归用例在原调度代码上复现“断路目标从下一轮消失”。
  • 修复后 281 项必需 GameTest 全部通过,clean build 通过。
  • 已检查发布包不含 GameTest / ClientSmoke 类。
  • 本机测试环境:Minecraft 1.21.1、NeoForge 21.1.231、Create 6.0.10;实际服务器场景仍待复测。

SHA-256

61a9ab598e004ed8aa96a8bfdc93d3b0b1832630c250105fb6ca0f8496df726a Create-Distant-Stock-0.3.55+mc1.21.1.jar

Create: Distant Stock v0.3.54

Choose a tag to compare

@EVGA2048 EVGA2048 released this 11 Oct 08:09

Create: Distant Stock v0.3.54

v0.3.51 之后的累计更新(0.3.52 → 0.3.54)。测试服建议直接换这一版。

便携流体罐

  • 图标现在画的是流体本身。 以前是「一块窗口形状的遮罩 + 染成流体的颜色」,所以水、建筑工茶饮、葡萄汁长得一模一样,只是颜色不同。现在观察窗里放的是那个流体自己的贴图(水的、岩浆的、茶的、任何模组流体的),外壳盖在上面;液位只决定填满窗口的下半还是整个。
  • 顺带修掉一个副作用:液位不再写进物品数据,而是直接由内容算出来,不可能再和耐久条不一致。
  • 喝进去的效果现在看得见。 Create 的建筑工茶饮其实一直生效(三分钟急迫),但它把这条效果的图标和粒子都关掉了,所以从罐子里喝完什么都看不到(直接喝真瓶子也一样)。罐子这条路上现在会把效果显示出来——效果、时长、等级都不变,只是让它亮个图标。

谐振石英护甲

  • 介质储备 ×4:胸甲能装的压缩空气是 Create 背罐的四倍,空中续航随之翻两番。(Create 普通背罐不受影响。)
  • 规格化说明:全套免疫火焰/岩浆/火球(不需充能)、靴子移速 +25% + 跳跃提升 I、胸甲持械攻击 +60%、满套充能再乘 1.15。

进度(Advancement)

  • 新增一整页进度标签:一件设备一条,从「第一次拿到以太石英」到「完整谐振套」,含流体罐、红石请求器、远仓仪表、打包机、监视器、日志台、机壳、互通塔部件等。

修复

  • 链路诊断:坏地址在恢复后不再被反复重探;探针间隔按配置走;盘点不再把坏地址写回。
  • 谐振套说明文案里的 Format error(% 未转义)。
  • 机壳在 F3+T / 资源重载后变成白板。

请重点测试

  • 流体罐:装水/岩浆/茶/任意模组流体,图标是否为那一味流体本身、液位对不对;喝建筑工茶饮看是否出现「急迫」图标;喝水看纯净等级提示。
  • 谐振套:胸前介质储备条是否更耐飞、火焰免疫、跳跃、持械攻击。
  • 进度:打开进度界面看新标签页各条目是否正常点亮。

Create: Distant Stock v0.3.51

Choose a tag to compare

@EVGA2048 EVGA2048 released this 11 Oct 05:54

Create: Distant Stock v0.3.51

从 v0.3.19 之后累计 30 多个版本的第一次发布:谐振石英护甲重做、三档便携流体罐、思索场景重制,外加一批修复。测试服建议直接换这一版。

主要变化

三档便携流体罐(resonant_canister 泛化而来,老存档原样继承)

  • 铜 1500 mB / 坚固 3500 mB / 谐振 5500 mB,图标按液位分三档。
  • 装得下任何流体:注液器或流体包裹的水龙头灌入;右键工作盆、分液池、流体储罐倒出;潜行右键只倒入对方装得下的那部分(哪怕不足一桶)。永远不会把流体放到地上。
  • 可饮用的流体可以喝:每次 250 mB,兼容 Thirst Was Taken 的纯净等级(药水按药水效果、牛奶按牛奶、水按纯净等级、其余按它对应的物品形态)。
  • 带在背包里会自动为谐振石英护甲补充介质。

谐振石英护甲

  • 新物品图标:胸甲背后多了一对收拢的鞘翅,四件都加深了暗边,背包里更容易辨认。
  • 全套四件(不需要充能)免疫火焰与岩浆,包括烈焰人与恶魂的火球。
  • 靴子:移动速度 +25%,新增跳跃提升 I(等同跳跃提升药水一级,不显示粒子)。
  • 胸甲:手持武器或工具时攻击伤害 +60%,按武器威力缩放。空手仍是原版伤害、火把和方块不触发——「拍一拍拍不死人,打架才有输出」。满套充能再乘 1.15。
  • 悬浮说明改成 Create 本体的写法:一句话概要,按住 Shift 展开条件与效果。

思索(Ponder)场景重制

  • 共 11 篇,新增 红石请求器、缓存蛙港、工况与报警 三篇;注册关系重新分配,讲解更贴合设备本身。
  • 打包机/远仓港的「导出」现在会真的走一遍传送动画;互通塔一篇展示了动力与以太从外部接入。
  • 结构和字幕现在有自动校验(结构可复现、字幕指向真实存在的方块)。

修复

  • 谐振护甲半透明时能透过正面看到壳子背面(现在剔除背面)。
  • 护甲与流体罐的部分说明行显示成 Format error。
  • 机壳在 F3+T / 资源重载后变成白板。
  • 日志台:潜行解绑无效、绑定失败却提示成功、每游戏刻重复排序。

请重点测试

  • 谐振套:火焰免疫(走进火/岩浆、挨火球)、跳跃、持械攻击、新图标,以及按 Shift 的说明文案。
  • 流体罐:注液器灌任意流体、倒进分液池/工作盆、喝水时的纯净等级提示、潜行右键只倒一部分。
  • 思索:打包机与港的导出动画、互通塔的供能与供液、缓存蛙港一篇。

安装与升级

  • Minecraft 1.21.1、NeoForge(开发基准 21.1.231)、Create 6.0.x、Transerver 0.1.x。
  • 客户端与每一台参与远仓互通的服务器都要安装,且本版请客户端与服务端同时更新(新增了自定义数据包,版本不一致会握不上手)。
  • 节点间协议仍为 1;旧存档可直接使用。

SHA-256: 8cfc7611fac65a9c5cea69dd45d55480b108a05f42be4a0f87fa28a194121a97


English summary. First release since v0.3.19, covering thirty-odd versions of work. The suit is remade (new icons, full-set fire and lava immunity including fireballs, Jump Boost I on the boots, attack damage now a +60% share of the weapon and only while armed), the canister became three tiers of portable fluid tank that hold any fluid and can be drunk from, and the Ponder scenes were rebuilt into eleven storyboards with automatic checks on their structures and captions. Update client and server together; the node protocol is unchanged.

Create: Distant Stock v0.3.19

Choose a tag to compare

@EVGA2048 EVGA2048 released this 05 Oct 13:36

Create: Distant Stock v0.3.19

This release completes the network broadcast chain and improves placement consistency for PA devices.

Highlights

  • Added Network Speaker, a receive-only endpoint for Create logistics networks.
  • Network Speakers receive text and sound profiles from Network Broadcasters, then play the selected cue and show the message to nearby players.
  • Added full six-direction placement for both Network Speakers and Brass Announcers: floor, ceiling, and all four walls.
  • Network Speaker visuals combine a dark note-block speaker body with the Distant Stock white-blue/cyan equipment palette.
  • Reduced Westminster clock chime volume for both Nixie and Flap clocks.

Upgrade notes

  • Minecraft 1.21.1, NeoForge, Create 6.0.x.
  • Network payload protocol remains 19.
  • Update client and server together when using the new Network Speaker block.

SHA-256: 280c6183ba4af6bd0f6f7e29c8d64e140b7bc9145f267d88b72428973184313c