Repository navigation
Releases
Stallion 1.1
Stallion 1.1
Stallion 1.1 fixes and refines Stallion 1.0, free, open-source synthesizer firmware for the M-VAVE FM-1 and the M-VAVE SMK-37 Pro, by Eberon Limited (John Gorman).
Stallion is built on Clipper by 3dSam (isod89) and Clipper Pro, its SMK-37 port (isod89 with M. Geisler); Clipper grew out of SLOOP, and all of them are based on Felucca by Leo Kuroshita / Hügelton Instruments. Everyone it builds on is named in CREDITS.md, with every licence in LICENSING.md.
Licence
Every part of Stallion is free to use, change and share under its listed licence: the code under GPL-3.0-only (the few third-party source files under the GPL-compatible licences listed in LICENSING.md), the data (samples, fonts, images) under the licences listed file by file in assets/MANIFEST. Nothing in Stallion is "all rights reserved".
Install
- Open eberonltd.github.io/stallion-fm1 in Chrome or Edge on a computer, or Chrome on Android, and press Install on FM-1 or Install on SMK-37 Pro.
- Packages:
stallion-1.1.fwscfor the FM-1,stallion-smk37-1.1.fwscfor the SMK-37 Pro. They are built and signed on GitHub from this release's tag; check one withgh attestation verify stallion-1.1.fwsc --repo EberonLtd/stallion-fm1 --signer-workflow zvenson/fm1-build/.github/workflows/build.yml. - Identity: FM-1_104211 and SMK-37 Pro_104211.
- Your sounds, settings and projects stay as they are. Save a backup with the editor first all the same.
What is new
- Quiet sounds at a low volume no longer buzz. The output now keeps the extra resolution of the 24-bit converter through the volume, the limiter and the soft knee, so a very quiet sound with the volume down stays smooth instead of turning into a buzzing staircase. At full volume the output is exactly as before.
- The macros glide. BRITE, TIMBR, MOTN and SPACE move to a new value over about 40 ms instead of jumping, so a fast fader sweep no longer steps or wobbles. A newly loaded sound starts at its values at once.
- SMK-37 Pro faders follow faster. A fader move reaches the sound within a few milliseconds, also while the screen is redrawing.
- Gentler aftertouch on the filter. AT> CUT opens the filter up to about 2 octaves instead of 4, on every engine, so held pads stay warm.
- A softer key swell on the SMK-37 Pro. GLO > KEY AT's CEIL now defaults to 64 (half pressure) instead of 127. A unit keeps the CEIL it has saved; set it in GLO > KEY AT.
- PONY's factory sounds re-voiced. 18 of Clipper's PONY sounds, brighter than the instrument they follow, have a lower cutoff (and some sub on the strings), measured against recordings of the original playing pads and chords; levels re-matched.
- Releases are built and signed on GitHub with the FM-1 Firmware Hub's shared build workflow.
Fixes
- Fitting the new code: the drum table's start-up image moved out of the flash, and the FM-1's fast RAM code area grew, so both boards keep a margin.
- The README, the site and the 1.0 notes credit Clipper and OberVave where Stallion builds on them, and no longer list a fix Clipper made first.
Stallion 1.0 (built and signed on GitHub)
Built and signed on GitHub from this tag with the FM-1 Firmware Hub's shared build workflow. The same code as v1.0.0; only the build date shown on the screen differs. Verify a package with:
gh attestation verify stallion-1.0.fwsc --repo EberonLtd/stallion-fm1 --signer-workflow zvenson/fm1-build/.github/workflows/build.yml
Stallion 1.0.0
Stallion 1.0.0 is the first release of Stallion, free, open-source synthesizer firmware for the M-VAVE FM-1 and the M-VAVE SMK-37 Pro, by Eberon Limited (John Gorman).
Stallion is built on Clipper by 3dSam (isod89) and Clipper Pro, its SMK-37 port (isod89 with M. Geisler). Clipper grew out of SLOOP, and all of them are based on Felucca by Leo Kuroshita / Hügelton Instruments. Stallion keeps everything they do. These notes list what Stallion 1.0.0 adds on top: 132 new features and fixes.
26 engines and 819 factory sounds, 4 of the engines new (PALOMINO, STAMPEDE, RODEO, MARE) and PONY rebuilt from the ground up (24 engine and sound features) · 6 filter features · 2 effect features · 12 modulation and matrix features · 10 playing features · 11 touch and aftertouch features · 8 sequencer and arpeggiator features · 9 screen and control features · 14 web editor features · 5 saving features · 3 MIDI features · 2 installing features · 26 fixes.
Licence
Every part of Stallion is free to use, change and share under its listed licence: the code under GPL-3.0-only (the few third-party source files under the GPL-compatible licences listed in LICENSING.md), the data (samples, fonts, images) under the licences listed file by file in assets/MANIFEST. Nothing in Stallion is "all rights reserved".
Install
- Open eberonltd.github.io/stallion-fm1 in Chrome or Edge on a computer, or Chrome on Android (not Safari, iPhone or iPad), and press Install on FM-1 or Install on SMK-37 Pro.
- Packages:
stallion-1.0.fwscfor the FM-1,stallion-smk37-1.0.fwscfor the SMK-37 Pro. Stallion supports the SMK-37 Pro only: the installer refuses the SMK-37 Elite, the MKE-P37 and the Starrykey 37 Play. - Save a backup with the editor (the Backup tab) before you install over Stallion, Clipper or SLOOP.
- On macOS, if the instrument's MIDI port still shows as Clipper or Hügelton Instruments - Clipper: unplug it, delete that device in Audio MIDI Setup > MIDI Studio, and plug it in again.
- The guide: GUIDE.md.
What is new
819 sounds on 26 engines. Every engine now comes with a full bank of its classic sounds.
- A full bank for every engine: 32 classic sounds on 23 engines, 28 on ACID and SAMPLE, 27 on WSEQ (819 in all), every bank starting with a plain INIT.
- Centred and level-matched: every factory sound has its left and right within 1 dB, and each is measured with a phrase that suits it and trimmed to the same loudness (within 1.5 dB; the sample-based SAMPLE and GRAIN sounds keep their own levels).
- Synth sounds for a keys player: pads, leads, basses, synth brass and strings, keys, organs, plucks and sequences. No bells, chimes, mallets, drums or imitations of other players' instruments.
- Sounds that move: the PONY, PALOMINO, STAMPEDE, RODEO and MARE sounds, and every sound new in this release on the other engines, are patched in the matrix, so LFOs, envelopes, velocity, pressure and the wheel move them as you play. A factory sound can use all 24 matrix slots.
- MARE, from the instrument's patch books: 32 sounds built from the patch books' routings and techniques, in balanced stereo, with SPACE working as the instrument's SPACING and P>VCO as its PITCH MOD ASSIGN.
PALOMINO, the whole story. PALOMINO follows the later, smaller edition of its instrument, and Stallion carries over what that edition added.
- Six waves on both oscillators: sine and noise on VCO 1, triangle and square on VCO 2.
- VCO-2 LOW: VCO 2 drops eight octaves to become a slow modulator.
- A choice of where the modulation goes: P>VCO sends the LFO and envelope pitch modulation to both oscillators or just one.
- Five new effects: PITCH, PIT2, PHAS6, DELAY and LOCMP on every sound's INSERT.
- Envelopes that follow the key: ERATE, so high notes are shorter.
- A second filter and steeper slopes: FILTER 2 and SLOPE 12, 24 or 48 dB, on every sound.
- 32 sounds: pads, strings, brass, leads, basses and keys.
- Even unison: fixed phase offsets, so a stack is as loud every time.
Sound engines (24)
- PALOMINO: a big early-1980s 8-voice poly. Two VCOs with six waves each, cross mod, hard sync, an OTA filter at 12 or 24 dB. 32 sounds: pads, strings, brass, leads, basses and keys.
- STAMPEDE: a late-1970s poly with two complete channels per voice. A wave morph through noise, saw, pulse, sine and ring; channel II's feet and detune; a resonant high-pass then low-pass with its own envelope. 32 sounds.
- RODEO: the punchy, brassy 8-voice polys of 1979-84, ported from zvenson's OberVave. Two oscillators with hard sync and X-MOD, and a filter in six modes (LP12, HP12, BP12, NOTCH, LP24, MORPH). 32 sounds.
- MARE: a semi-modular paraphonic voice with two VCOs and two ladder filters. The filters sit apart in stereo, side by side (high-pass and low-pass) or in series. 32 sounds: basses, leads, pads, sequences, drones, keys, strings and brass.
- PALOMINO's extra waves: sine and noise on VCO 1, triangle and square on VCO 2, as on the modern reissue of the instrument it follows.
- PALOMINO VCO-2 LOW: VCO 2 drops eight octaves to become a slow modulator for wobbles and slow vibrato.
- P>VCO on PALOMINO and MARE (MOD page): send the LFO and envelope pitch modulation to both VCOs or just one, for sync sweeps and beating. On MARE it is the instrument's PITCH MOD ASSIGN.
- MARE FILTER FM and RING (EDIT 3): VCO 2 sweeps both filters at audio rate, or rings against VCO 1, for growls and metallic edges.
- MARE split modes (MODE SPLT, SPL+N): VCO 1 alone goes to the left filter and VCO 2 alone to the right.
- MARE's normals: a cable into VCO 1's pitch moves VCO 2 too, and filter 2 follows filter 1's cutoff, until you give them cables of their own.
- STALLION: a new signature HYBRID sound.
- Every factory sound level-matched and centred: no sound jumps out louder or quieter than the next, and none sits in one ear (left and right within 1 dB). The test suite checks both.
- PALOMINO VCO-2 fine tune (EDIT > VOICE 2 > DTUNE): sets how far VCO 2 sits above VCO 1, from 0 to about 16 cents (the old fixed 5 cents is the default, 40), for thick brass, strings and pads.
- Resonance that stops short of howling: PALOMINO's filter now stops just below self-oscillation at full RES, and RODEO's up to RES 123, so a resonant bass or brass rings and decays instead of whistling. RODEO's top four steps sing on purpose, as its originals do.
- PALOMINO pulse width one way: SHAPE (and an LFO or envelope on it) sweeps the pulse from square towards narrow, once per cycle, instead of folding both ways.
- An analog attack on PALOMINO, STAMPEDE, RODEO and MARE: the attack charges quickly and then eases in, the same length as before, for swells and brass with more bite.
- POLY2 (EDIT > VOICE 2 > ALLOC): a new note cuts the notes already let go, so only the last chord keeps its release. Good for sequences and arpeggios.
- Free delay times (FX > DELAY > TIME): 35, 50, 75, 100, 150, 200, 300, 400, 500, 600, 700 and 780 ms, besides the tempo values, on every sound.
- MARE SPACE and DIST: SPACE works as the instrument's SPACING: it moves VCF 1 alone (the left low-pass, or the high-pass in PARA and SERI), clockwise up, while VCF 2 stays at CUT. DIST drives the two ladder filters, so it thickens the sound before the filters instead of coming after them.
- STAMPEDE plain SINE after the filters: the SINE wave ignores the filters, as a plain sine channel should. IL can go below zero, so a note can start under the cutoffs as set.
- STAMPEDE filter envelope with its own times: as on the original, the filter envelope has its own attack, decay and release, set with ENV 2's ATK, DEC and REL (ENV 2 ATK 0 keeps the volume envelope's). The brass sounds now open slowly over a third of a second or more and settle smoothly.
- 819 factory sounds on 26 engines: a full bank of classic sounds for every engine (32 on 23 engines, 28 on ACID and SAMPLE, 27 on WSEQ), each starting with a plain INIT.
- Sounds that move: the PONY, PALOMINO, STAMPEDE, RODEO and MARE sounds are patched in the matrix (154 of their 160 sounds, up to 7 cables each; the sounds new in this release on every other engine have 3 to 7 cables each): pads breathe, brass swells with velocity and pressure, keys and plucks answer how hard you play. A factory sound can now use all 24 matrix slots, as a user preset does.
- MARE's bank, from the instrument's patch books: 32 sounds built from the routings and techniques of the patch books for the instrument MARE follows, INIT the instrument with nothing patched. MARE's sounds keep the delay and reverb their patches name; every other factory sound starts dry. The pads, pedals, strings, keys and swells, and PIPE BASS, SWEEP BASS and PARA BASS, let go over about 4.5 s, BERLIN SEQ over about 10 s; the other basses, the leads, sequences and riffs, the stab, the organ and the pluck keep a short release.
- MARE in balanced stereo: with the two filters apart, both sides stay equally loud while their timbres differ. Before, the darker side was up to 16 dB quieter (32 dB in PARA), so the sounds had to keep SPACE at 0.
Filters (6)
- FILTER 2: a second filter on every sound, using any of the nine filter models. ROUT...
Stallion 1.0.0
Stallion 1.0.0
Stallion 1.0.0 is the first release of Stallion, free, open-source synthesizer firmware for the M-VAVE FM-1 and the M-VAVE SMK-37 Pro, by Eberon Limited (John Gorman).
Stallion is built on Clipper by 3dSam (isod89) and Clipper Pro, its SMK-37 port (isod89 with M. Geisler). Clipper grew out of SLOOP, and all of them are based on Felucca by Leo Kuroshita / Hügelton Instruments. Stallion keeps everything they do. These notes list what Stallion 1.0.0 adds on top: 132 new features and fixes.
26 engines and 819 factory sounds, 4 of the engines new (PALOMINO, STAMPEDE, RODEO, MARE) and PONY rebuilt from the ground up (24 engine and sound features) · 6 filter features · 2 effect features · 12 modulation and matrix features · 10 playing features · 11 touch and aftertouch features · 8 sequencer and arpeggiator features · 9 screen and control features · 14 web editor features · 5 saving features · 3 MIDI features · 2 installing features · 26 fixes.
Licence
Every part of Stallion is free to use, change and share under its listed licence: the code under GPL-3.0-only (the few third-party source files under the GPL-compatible licences listed in LICENSING.md), the data (samples, fonts, images) under the licences listed file by file in assets/MANIFEST. Nothing in Stallion is "all rights reserved".
Install
- Open eberonltd.github.io/stallion-fm1 in Chrome or Edge on a computer, or Chrome on Android (not Safari, iPhone or iPad), and press Install on FM-1 or Install on SMK-37 Pro.
- Packages:
stallion-1.0.fwscfor the FM-1,stallion-smk37-1.0.fwscfor the SMK-37 Pro. Stallion supports the SMK-37 Pro only: the installer refuses the SMK-37 Elite, the MKE-P37 and the Starrykey 37 Play. - Save a backup with the editor (the Backup tab) before you install over Stallion, Clipper or SLOOP.
- On macOS, if the instrument's MIDI port still shows as Clipper or Hügelton Instruments - Clipper: unplug it, delete that device in Audio MIDI Setup > MIDI Studio, and plug it in again.
- The guide: GUIDE.md.
What is new
819 sounds on 26 engines. Every engine now comes with a full bank of its classic sounds.
- A full bank for every engine: 32 classic sounds on 23 engines, 28 on ACID and SAMPLE, 27 on WSEQ (819 in all), every bank starting with a plain INIT.
- Centred and level-matched: every factory sound has its left and right within 1 dB, and each is measured with a phrase that suits it and trimmed to the same loudness (within 1.5 dB; the sample-based SAMPLE and GRAIN sounds keep their own levels).
- Synth sounds for a keys player: pads, leads, basses, synth brass and strings, keys, organs, plucks and sequences. No bells, chimes, mallets, drums or imitations of other players' instruments.
- Sounds that move: the PONY, PALOMINO, STAMPEDE, RODEO and MARE sounds, and every sound new in this release on the other engines, are patched in the matrix, so LFOs, envelopes, velocity, pressure and the wheel move them as you play. A factory sound can use all 24 matrix slots.
- MARE, from the instrument's patch books: 32 sounds built from the patch books' routings and techniques, in balanced stereo, with SPACE working as the instrument's SPACING and P>VCO as its PITCH MOD ASSIGN.
PALOMINO, the whole story. PALOMINO follows the later, smaller edition of its instrument, and Stallion carries over what that edition added.
- Six waves on both oscillators: sine and noise on VCO 1, triangle and square on VCO 2.
- VCO-2 LOW: VCO 2 drops eight octaves to become a slow modulator.
- A choice of where the modulation goes: P>VCO sends the LFO and envelope pitch modulation to both oscillators or just one.
- Five new effects: PITCH, PIT2, PHAS6, DELAY and LOCMP on every sound's INSERT.
- Envelopes that follow the key: ERATE, so high notes are shorter.
- A second filter and steeper slopes: FILTER 2 and SLOPE 12, 24 or 48 dB, on every sound.
- 32 sounds: pads, strings, brass, leads, basses and keys.
- Even unison: fixed phase offsets, so a stack is as loud every time.
Sound engines (24)
- PALOMINO: a big early-1980s 8-voice poly. Two VCOs with six waves each, cross mod, hard sync, an OTA filter at 12 or 24 dB. 32 sounds: pads, strings, brass, leads, basses and keys.
- STAMPEDE: a late-1970s poly with two complete channels per voice. A wave morph through noise, saw, pulse, sine and ring; channel II's feet and detune; a resonant high-pass then low-pass with its own envelope. 32 sounds.
- RODEO: the punchy, brassy 8-voice polys of 1979-84, ported from zvenson's OberVave. Two oscillators with hard sync and X-MOD, and a filter in six modes (LP12, HP12, BP12, NOTCH, LP24, MORPH). 32 sounds.
- MARE: a semi-modular paraphonic voice with two VCOs and two ladder filters. The filters sit apart in stereo, side by side (high-pass and low-pass) or in series. 32 sounds: basses, leads, pads, sequences, drones, keys, strings and brass.
- PALOMINO's extra waves: sine and noise on VCO 1, triangle and square on VCO 2, as on the modern reissue of the instrument it follows.
- PALOMINO VCO-2 LOW: VCO 2 drops eight octaves to become a slow modulator for wobbles and slow vibrato.
- P>VCO on PALOMINO and MARE (MOD page): send the LFO and envelope pitch modulation to both VCOs or just one, for sync sweeps and beating. On MARE it is the instrument's PITCH MOD ASSIGN.
- MARE FILTER FM and RING (EDIT 3): VCO 2 sweeps both filters at audio rate, or rings against VCO 1, for growls and metallic edges.
- MARE split modes (MODE SPLT, SPL+N): VCO 1 alone goes to the left filter and VCO 2 alone to the right.
- MARE's normals: a cable into VCO 1's pitch moves VCO 2 too, and filter 2 follows filter 1's cutoff, until you give them cables of their own.
- STALLION: a new signature HYBRID sound.
- Every factory sound level-matched and centred: no sound jumps out louder or quieter than the next, and none sits in one ear (left and right within 1 dB). The test suite checks both.
- PALOMINO VCO-2 fine tune (EDIT > VOICE 2 > DTUNE): sets how far VCO 2 sits above VCO 1, from 0 to about 16 cents (the old fixed 5 cents is the default, 40), for thick brass, strings and pads.
- Resonance that stops short of howling: PALOMINO's filter now stops just below self-oscillation at full RES, and RODEO's up to RES 123, so a resonant bass or brass rings and decays instead of whistling. RODEO's top four steps sing on purpose, as its originals do.
- PALOMINO pulse width one way: SHAPE (and an LFO or envelope on it) sweeps the pulse from square towards narrow, once per cycle, instead of folding both ways.
- An analog attack on PALOMINO, STAMPEDE, RODEO and MARE: the attack charges quickly and then eases in, the same length as before, for swells and brass with more bite.
- POLY2 (EDIT > VOICE 2 > ALLOC): a new note cuts the notes already let go, so only the last chord keeps its release. Good for sequences and arpeggios.
- Free delay times (FX > DELAY > TIME): 35, 50, 75, 100, 150, 200, 300, 400, 500, 600, 700 and 780 ms, besides the tempo values, on every sound.
- MARE SPACE and DIST: SPACE works as the instrument's SPACING: it moves VCF 1 alone (the left low-pass, or the high-pass in PARA and SERI), clockwise up, while VCF 2 stays at CUT. DIST drives the two ladder filters, so it thickens the sound before the filters instead of coming after them.
- STAMPEDE plain SINE after the filters: the SINE wave ignores the filters, as a plain sine channel should. IL can go below zero, so a note can start under the cutoffs as set.
- STAMPEDE filter envelope with its own times: as on the original, the filter envelope has its own attack, decay and release, set with ENV 2's ATK, DEC and REL (ENV 2 ATK 0 keeps the volume envelope's). The brass sounds now open slowly over a third of a second or more and settle smoothly.
- 819 factory sounds on 26 engines: a full bank of classic sounds for every engine (32 on 23 engines, 28 on ACID and SAMPLE, 27 on WSEQ), each starting with a plain INIT.
- Sounds that move: the PONY, PALOMINO, STAMPEDE, RODEO and MARE sounds are patched in the matrix (154 of their 160 sounds, up to 7 cables each; the sounds new in this release on every other engine have 3 to 7 cables each): pads breathe, brass swells with velocity and pressure, keys and plucks answer how hard you play. A factory sound can now use all 24 matrix slots, as a user preset does.
- MARE's bank, from the instrument's patch books: 32 sounds built from the routings and techniques of the patch books for the instrument MARE follows, INIT the instrument with nothing patched. MARE's sounds keep the delay and reverb their patches name; every other factory sound starts dry. The pads, pedals, strings, keys and swells, and PIPE BASS, SWEEP BASS and PARA BASS, let go over about 4.5 s, BERLIN SEQ over about 10 s; the other basses, the leads, sequences and riffs, the stab, the organ and the pluck keep a short release.
- MARE in balanced stereo: with the two filters apart, both sides stay equally loud while their timbres differ. Before, the darker side was up to 16 dB quieter (32 dB in PARA), so the sounds had to keep SPACE at 0.
Filters (6)
- FILTER 2: a second filter on every sound, using any of the nine filter models. ROUTE: SER (an LP and an HP make a band-pass), PAR (two peaks) or SPLIT (filter 1 left, filter 2 right: each voice in stereo).
- LINK: FILTER 2 follows filter 1's cutoff at an offset, so one knob sweeps both. Turn LINK off to set it freely.
- SLOPE: the 4-pole filters at 12, 24 or 48 dB. 48 dB is steep but keeps its resonance and its bass.
- OTA filter model: the smooth resonant low-pa...