Repository navigation
Releases
SPR Recomp v0.1.9
v0.1.9: Xbox button prompts, bigger ultrawide, DualSense trigger feedback and more AMD fixes
Don't forget to follow me on X for news about the next releases: https://x.com/Lyriiiie
Also, GTA VI is coming soon and I have pushed a lot of updates recently. To not burn out, I will push a new release only in case of game-breaking bugs, really annoying ones, or small fixes. (and for anyone else that will play GTA VI, enjoy !)
New
- Xbox button prompts (#15). With Button layout set to Xbox prompts (A right) in the F1 menu (Controls, after a restart), the game's menus and button pictures now show the Xbox A/B and X/Y layout; before, the menu only reported missing files. The setup builds the swapped pictures from your own RomFS (menu key guides and the button font), so this needs the setup to run again (see Updating below).
- More ultrawide sizes (#13). The Ultrawide row now offers 3440 x 1440 and 3840 x 1600 (21:9) and 3840 x 1080 (32:9), besides 2560 x 1080 and 3072 x 864. 3840 wide is the most the game's window textures allow. Checked at 3840 x 1600; docked mode only, as before.
- DualSense trigger feedback (#16). On a DualSense, R2 (shoot) now vibrates under your finger while you fire, and harder on each kick the game rumbles. Released, the trigger is free: there is no permanent resistance. Adaptive trigger in the F1 menu (Controls) sets it to Light (default), Strong or Off. Other controllers are not affected.
Fixed
- Updating an install made from a .nup (#17). The setup no longer asks for the .nup again when it has moved or been deleted: it rebuilds from the ExeFS and RomFS already in the install folder (checked against their hashes). Choosing those two folders by hand works too, instead of failing with "The output and source folders must be separate".
- Ultrawide character preview (#15). In the menus, the character preview is no longer squeezed when ultrawide is on.
Fixed (experimental): AMD GPUs (#14)
- The recorder thread is off by default on AMD. An RX 9070 XT crashed at launch with it and ran without it.
vk_recorder = 1turns it back on. - No more posterized sky and water on AMD. The game's compressed sky cubemap no longer gets the extra texture views that AMD's Windows driver samples wrongly (the sky came out in bands and streaks).
- These AMD fixes are still experimental. They were made from a report and tested on NVIDIA only: nothing guarantees every AMD problem is solved. Reports from AMD owners, working or not, are very welcome (with
logs\dkb.log).
Not in this release
- The game still slows down when the frame rate drops below 60 fps. Splatoon Raiders steps its world once per displayed frame, so 45 fps plays like slow motion. A fix that keeps the game at real speed was tried: it does keep the speed, but running several game steps per drawn frame breaks the ink on the ground, the lighting and the player's body, because the game prepares GPU work once per step that the picture then misses. Doing this right is complicated, so the fix will come in a later release.
Updating
Run SPR-Setup.exe from this zip and choose your existing install folder: it continues from the last completed step and recompiles only what changed. The Xbox prompts need this run, since they are built from your RomFS.
SPR Recomp: a static recompilation of Splatoon Raiders (Switch 2) to a native Windows exe with a Vulkan renderer. It is an experimental fork of DKB Recomp (itself built on TotK Recomp).
A release holds no game data. You build the game on your own PC from your own dump, given as a .nup file or as an ExeFS folder and a complete RomFS folder.
Game versions: update 65536 is the only tested version. The base game (1.0.0) and other updates are accepted, but their support is experimental: nothing says they build, start or play correctly, and the setup warns when it sees one. Please check a problem on update 65536 before reporting it.
State
- The title, the opening cutscene, the character creator, the hub and the first gameplay zone render and play at about 60 fps on an RTX 3050, with the player's body drawn.
- Below 60 fps the game runs in slow motion (see Not in this release).
- The game's neural-network upscaler is stood in for by FSR 1 EASU.
- Resolution (F1 menu, Picture, after restart): 1080p, 1440p or 4K docked; handheld renders 1280x720 at 1080p and 1920x1080 above. Ultrawide 21:9 (2560 x 1080, 3440 x 1440, 3840 x 1600) or 32:9 (3072 x 864, 3840 x 1080) docked.
- F1 menu languages: English, Russian, Korean.
Requirements (Windows)
- A GPU with Vulkan 1.3 and a recent driver; tested on NVIDIA only. AMD support is still unknown and its fixes are experimental, see above.
- 16 GB of RAM plus a large page file (the process commits about 11 GB), 32 GB is comfortable.
- About 6 GB free for the build, besides the dump.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.8...v0.1.9
SPR Recomp v0.1.8
v0.1.8: ultrawide, Korean menu and an experimental AMD fix
Don't forget to follow me on X for news about the next releases: https://x.com/Lyriiiie
New
- Ultrawide (21:9 and 32:9). A new Ultrawide row in the F1 menu (Screen tab, Picture group): Off, 21:9 (2560 x 1080) or 32:9 (3072 x 864), applied after a restart. The game renders its frame, render targets and 3D scene at that size, and the camera's view is widened instead of stretched. The HUD keeps its 16:9 layout in the middle of the screen. Works windowed and fullscreen; on a screen of another size the picture is scaled to it (for example 2560 x 1080 on a 3440 x 1440 screen). Docked mode only: in handheld mode the setting stays off. While it is on, Resolution has no effect. 21:9 was played in the first zone at 60 fps on an RTX 3050; 32:9 was only checked at the title screen.
- The F1 menu in Korean (한국어). Every menu and overlay text is translated. Pick it in the Menu tab, or leave the menu language on Automatic with Windows set to Korean. The Korean letters come from the Windows Korean font (Malgun Gothic).
Fixed (experimental)
- AMD: textures that are not cubemaps are no longer made cube compatible. The game samples three of its texture arrays as cubemaps (sky and reflection probes, all of 6 layers), but the old rule also flagged a 30-layer material array that is never a cube. On AMD's Windows driver a compressed, mipmapped array flagged this way is known to be sampled wrongly (other recomp projects saw rainbow blocks that change with distance), which matches the glitching sky texture reported on a ROG Ally (#2). This fix is experimental and was tested on NVIDIA only: it is not a guarantee that every AMD problem is solved. Reports from AMD owners, working or not, are very welcome.
- The log now names each texture shape the game samples as a cubemap, and any cubemap view that could not be made, which helps with AMD reports.
SPR Recomp: a static recompilation of Splatoon Raiders (Switch 2) to a native Windows exe with a Vulkan renderer. It is an experimental fork of DKB Recomp (itself built on TotK Recomp).
A release would hold no game data. You build the game on your own PC from your own dump, given as a .nup file or as an ExeFS folder and a complete RomFS folder.
Game versions: update 65536 is the only tested version. The base game (1.0.0) and other updates are accepted, but their support is experimental: nothing says they build, start or play correctly, and the setup warns when it sees one. Please check a problem on update 65536 before reporting it.
State
- The title, the opening cutscene, the character creator, the hub and the first gameplay zone render and play at about 60 fps on an RTX 3050, with the player's body drawn.
- The game's neural-network upscaler is stood in for by FSR 1 EASU.
- Resolution (F1 menu, Picture, after restart): 1080p, 1440p or 4K docked; handheld renders 1280x720 at 1080p and 1920x1080 above. Ultrawide 21:9 or 32:9 docked.
- F1 menu languages: English, Russian, Korean.
Requirements (Windows)
- A GPU with Vulkan 1.3 and a recent driver; tested on NVIDIA only. AMD support is still unknown, see the experimental fix above.
- 16 GB of RAM plus a large page file (the process commits about 11 GB), 32 GB is comfortable.
- About 6 GB free for the build, besides the dump.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.7...v0.1.8
SPR Recomp v0.1.7
v0.1.7: quick hotfix
Updating an existing install folder failed with "Choose an existing .nup file" when the .nup the folder was built from had been moved or renamed. The setup window now flags the .nup field before starting so you can pick the file again at its new location, and the command line names the missing path. The install already in the folder is kept and updated, so there is no need to reinstall from scratch (issue #8).
SPR Recomp: a static recompilation of Splatoon Raiders (Switch 2) to a native Windows exe with a Vulkan renderer. It is an experimental fork of DKB Recomp (itself built on TotK Recomp).
A release would hold no game data. You build the game on your own PC from your own dump, given as a .nup file or as an ExeFS folder and a complete RomFS folder.
Game versions: update 65536 is the only tested version. The base game (1.0.0) and other updates are accepted, but their support is experimental: nothing says they build, start or play correctly, and the setup warns when it sees one. Please check a problem on update 65536 before reporting it.
State
- The title, the opening cutscene, the character creator, the hub and the first gameplay zone render and play at about 60 fps on an RTX 3050, with the player's body drawn.
- The game's neural-network upscaler is stood in for by FSR 1 EASU.
- Resolution (F1 menu, Graphics, after restart): 1080p, 1440p or 4K docked; handheld renders 1280x720 at 1080p and 1920x1080 above. The higher modes are the game's own and have not been played through whole missions yet.
- The settings that act on Bananza patch sets (render scale, ultrawide, real-time frame timing) are hidden in the Raiders menu: the build has no patch sets.
Requirements (Windows)
- A GPU with Vulkan 1.3 and a recent driver; tested on NVIDIA only. AMD support is unknown: no AMD GPU has been tested yet, and reports from AMD owners, working or not, are welcome.
- 16 GB of RAM plus a large page file (the process commits about 11 GB), 32 GB is comfortable.
- About 6 GB free for the build, besides the dump.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.6...v0.1.7
SPR Recomp v0.1.6
SPR Recomp 0.1.6 fixes a crash when loading into a stage after finishing another one, and adds RecompLauncher support.
Fixed
- The game stopped while loading a stage after another one was finished. The log ended with
FATAL: svc #0x26 unknown at sdk+0x1a4540: Break (the SDK aborted). At each stage change the game sets up its amiibo event again, and the port kept the old one instead of creating it anew, so the game's next clean-up found it missing and stopped.
Added
- RecompLauncher support.
recomplauncher.jsonnow ships at the top of the release, so RecompLauncher can install, set up and update SPR Recomp, with the window mode and button layout settings, save backups and crash logs. Thanks to @elripalda for the pull request.
Updating
If you have an earlier version installed, download the zip below and run the setup again over the same folder. Your dump is needed again to rebuild the game. As before, the release holds no game data.
Everything else in the v0.1.4 notes still applies.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.5...v0.1.6
SPR Recomp v0.1.5
SPR Recomp 0.1.5 is a hotfix for a crash at startup (issue #5).
Fixed
- The game stopped before showing anything on PCs whose language makes it ask for the Korean or Chinese built-in font. The log ended with
FATAL: nn::pl::GetBuiltInFontData(...): the decoded font starts with 00 01 00 00, not an sfnt. The port now reads every built-in font from the game's RomFS: the standard, Korean, simplified Chinese (both faces) and traditional Chinese ones.
Updating
If you have an earlier version installed, download the zip below and run the setup again over the same folder. Your dump is needed again to rebuild the game. As before, the release holds no game data.
Everything else in the v0.1.4 notes still applies.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.4...v0.1.5
SPR Recomp v0.1.4
SPR Recomp 0.1.4 adds a resolution setting: the game can now render for a 1440p or 4K screen instead of 1080p only (issue #3).
Added
- Resolution (F1 menu → Graphics → Resolution, or
raiders_resin the ini): 1080p, 1440p or 4K (2160p). The host tells the game it is plugged into a TV of that resolution, so the game uses its own display modes:- Docked (TV mode): the output is 1920x1080, 2560x1440 or 3840x2160.
- Handheld: 1280x720 at 1080p, 1920x1080 at 1440p and 4K (the game's own handheld maximum).
- The setting takes effect after a restart (the menu says so). Higher resolutions need more video memory and GPU time: 4K docked ran at about 47 fps on the test machine (RTX 3050).
Fixed
- The performance overlay said "no upscaler" while the game's upscaler (replaced by FSR 1) was running. It now shows the upscaler's input and output sizes.
Known
- 1440p and 4K have not been played through whole missions yet. They work on the title screen, in the hub and in the first zone. If a mission crashes or runs out of memory at a higher resolution, go back to 1080p and please report it with your log.
- Cutscenes run at 30 fps, as the game asks for (see v0.1.3).
Updating
If you have an earlier version installed, download the zip below and run the setup again over the same folder. Your dump is needed again to rebuild the game. As before, the release holds no game data.
Game versions: update 65536 is the only tested version. Everything else in the v0.1.0 notes still applies: requirements (Vulkan 1.3 GPU, tested on NVIDIA only, AMD support unknown; 16 GB of RAM plus a large page file), and how to report a bug.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.3...v0.1.4
SPR Recomp v0.1.3
SPR Recomp 0.1.3 is a patch for v0.1.2: a crash during play is fixed and the boss fights of missions run at full frame rate.
Fixed
- Crash during play (
FATAL: access violationin the log, intex_mirrored): when the game freed many memory pools at once, a texture that still named one of them was read after its pool was gone. The host now checks that the pool is still alive before reading it. - Frame rate drops in mission fights and at the boss (30-45 fps): the ink painted on the ground is drawn one splat at a time, each with an update of its constants. With many enemies, one frame carried up to about 8,000 of these updates, more than the host's queue of 4,096 could hold, and every update past that point stopped the GPU completely. The queue now holds 32,768, and the boss runs at 55-60 fps on the test machine (RTX 3050).
Known
- Cutscenes run at 30 fps. The game itself asks for 30 fps in its cutscenes. Raising it needs a timing patch Raiders does not have yet, otherwise the cutscene would play too fast.
Updating
If you have an earlier version installed, download the zip below and run the setup again over the same folder. Your dump is needed again to rebuild the game. As before, the release holds no game data.
Game versions: update 65536 is the only tested version. Everything else in the v0.1.0 notes still applies: requirements (Vulkan 1.3 GPU, tested on NVIDIA only, AMD support unknown; 16 GB of RAM plus a large page file), and how to report a bug.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.2...v0.1.3
SPR Recomp v0.1.2
SPR Recomp 0.1.2 is a hotfix for v0.1.1 and v0.1.0: the game no longer stays on a black screen while audio and controls work.
WARNING
Game may crash at a certain point early in the story (like third mission)
Fixed
- Black screen with sound (#1): v0.1.0 and v0.1.1 shipped a broken shader translator (
bin/totk_xlate.exe, 41 KB). It only worked on the machine that built the release, so on every other PC each shader failed (gfx_shader: translation failed (...): translator unavailablein the log) and nothing was drawn. 0.1.2 ships the real, self-contained translator (3.3 MB), which needs no .NET install. - The release script now runs the translator on its own before packaging and refuses to build a release where it fails, so this cannot ship again.
- When the translator stops before answering, the log now says so once, with the translator's path, instead of only printing "translator unavailable" for every shader.
Updating
If you have v0.1.0 or v0.1.1 installed, download the zip below and run the setup again over the same folder. Your dump is needed again to rebuild the game. As before, the release holds no game data.
Game versions: update 65536 is the only tested version. Everything else in the v0.1.0 notes still applies: requirements (Vulkan 1.3 GPU, tested on NVIDIA only, AMD support unknown; 16 GB of RAM plus a large page file), and how to report a bug.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.1...v0.1.2
SPR Recomp v0.1.1
SPR Recomp 0.1.1 is a hotfix for v0.1.0: the game no longer crashes when a menu plays a movie.
Fixed
- Crash when a menu shows a movie (the gadget movies, for example): the SDK aborted while starting the video decoder (
movie::detail::InitializeDecoderByTransferMemoryin the log). Splatoon Raiders' SDK names somenn::codecVP9 calls differently from Bananza's, and the host now serves them. - Crash when moving from one movie to another: the decoder's flush dropped a picture the game had already been told was ready, and the movie library aborted. That picture is now kept.
Updating
If you have v0.1.0 installed, download the zip below and run the setup again over the same folder. Your dump is needed again to rebuild the game. As before, the release holds no game data.
Game versions: update 65536 is the only tested version. Everything else in the v0.1.0 notes still applies: requirements (Vulkan 1.3 GPU, tested on NVIDIA only, AMD support unknown; 16 GB of RAM plus a large page file), and how to report a bug.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: v0.1.0...v0.1.1
SPR Recomp v0.1.0
SPR Recomp: a static recompilation of Splatoon Raiders (Switch 2) to a native Windows exe with a Vulkan renderer. It is an experimental fork of DKB Recomp (itself built on TotK Recomp).
A release would hold no game data. You build the game on your own PC from your own dump, given as a .nup file or as an ExeFS folder and a complete RomFS folder.
Game versions: update 65536 is the only tested version. The base game (1.0.0) and other updates are accepted, but their support is experimental: nothing says they build, start or play correctly, and the setup warns when it sees one. Please check a problem on update 65536 before reporting it.
State
- The title, the opening cutscene, the character creator, the hub and the first gameplay zone render and play at about 60 fps on an RTX 3050, with the player's body drawn.
- The game's neural-network upscaler is stood in for by FSR 1 EASU.
- The settings that act on Bananza patch sets (resolution, ultrawide, real-time frame timing) are hidden in the Raiders menu: the build has no patch sets.
Requirements (Windows)
- A GPU with Vulkan 1.3 and a recent driver; tested on NVIDIA only. AMD support is unknown: no AMD GPU has been tested yet, and reports from AMD owners, working or not, are welcome.
- 16 GB of RAM plus a large page file (the process commits about 11 GB), 32 GB is comfortable.
- About 6 GB free for the build, besides the dump.
Reporting a bug
Open an issue on https://github.com/Elie-0066/SPR-Recomp-Project/issues with the log (logs\dkb.log next to spr-recomp.exe), the commit you built, your GPU and driver, and what you did before it failed. Never share generated files, keys, builds or screenshots that show game content.
Full Changelog: https://github.com/Elie-0066/SPR-Recomp-Project/commits/v0.1.0