Skip to content

Releases

QUARTZ 0.10

Choose a tag to compare

@F0nski F0nski released this 21 Nov 09:48

QUARTZ 0.10 for the M-VAVE FM-1.

New:

  • PRINT: hold SEQ and press black key 5 twice while playing: the next loop a generative source plays is written into STEP steps, ready to edit by hand.
  • Live transposition: hold GLO and press a key: every synth track's steps play transposed so that the tonic sounds as that key (in degrees of the scale with KEYS at ALL, else in semitones). The tonic's key puts them back.
  • EUCLID: hold REC and press black key 5 on a STEP pattern: hits spread evenly over LEN; turn PRESET, REC still held, for more or fewer. On a kit, it draws the last pad played only, the other pads kept.
  • x2: hold SEQ and press black key 6: LEN doubled, steps and p-locks copied onto the second half.
  • NUDGE: hold REC and press OCT- or OCT+: the steps turn one step left or right, p-locks with them.
  • SOLO: hold HOME and SEL, press white key 1-4; again to put the mutes back.
  • LATCH: hold FX and press black key 2: the punch-ins held, or pressed after it, stay on; press one's key again (FX held) to let it go, tap FX to let all go (not TAPE STOP, DELAY THROW, FREEZE).
  • INIT SOUND: hold SEQ and press black key 8 twice: the track's sound back to a new project's, its model kept.
  • KIT p-locks: a held step's PAD page locks TUNE, HARM, TIMB and DECAY of its pads.
  • ENV DEST: PRESET on ENV's FILTER page sends the envelope to PITCH, HARM, TIMB or MORPH instead of the cutoff. The FILTER page's scene now draws the filter's response, its resonance and where the envelope takes it.
  • LFO destinations PAN (an auto-pan) and INSERT (the insert's first knob), on both LFOs.
  • Two inserts: FILTER (resonant, low-pass to band-pass to high-pass) and TAPE (wow, flutter, drive).
  • A pattern can change at once: hold SEQ and SEL and press white key 1-8 while playing.

Changed:

  • The tracks count their steps from PLAY: a length changed and put back is in step with the others again; polyrhythms still work, counted from PLAY.
  • An orange * beside the track's number shows unsaved changes; loading another project over them asks UNSAVED: LOAD?
  • SAVE while playing now saves when you stop (SAVE AT STOP) instead of refusing.
  • With a selection, NOTE and PRESET now move each step's notes (a melody transposed) instead of setting them all alike.
  • RANDOM on a kit draws the last pad played only, the other pads and LEN kept.

Fixes: a 64-bit multiply in the sequencer's clock that could, rarely, move a step; a negative LFO 2 DEPTH lock that jumped to +63 when turned.

Projects saved by 0.9 load in 0.10; 0.9 backups don't restore.

Install from the site (https://f0nski.github.io/quartz/install/) or with python3 tools/fm1_install.py quartz-0.10.fwsc. Manual: https://f0nski.github.io/quartz/manual/

QUARTZ 0.9

Choose a tag to compare

@F0nski F0nski released this 20 Nov 12:51

QUARTZ 0.9 for the M-VAVE FM-1.

New:

  • Four projects: hold SAVE and press black key 2-5 (twice) to load project 1-4; SAVE writes the one loaded; at power-on the FM-1 loads the project saved last.
  • Backup and restore over USB: the site's backup page, tools/fm1_backup.py and the emulator share one file holding the four projects.
  • Copy and paste: hold SEQ, black keys 1-2 copy the pattern shown and paste it, 3-4 the track's sound (a KIT's pads too). What you copied stays when you load another project.
  • Undo: hold REC, black key 3 puts back the last CLEAR, CLEAR LOCKS, draw or paste; press again to redo.
  • Trig conditions FILL and !FILL: hold FX and black key 1 while playing.
  • ATLAS: LEN, 1 to 32 steps (MAP page, K4), for odd meters.
  • LFO 2: a second LFO per track, with its own FREE/TRIG and p-locks.
  • Fixes: a new project over a KIT now plays the new sound; manual corrections.

This version saves projects differently: the project saved by 0.8 is not loaded, and 0.8 backups don't restore.

Install from the site (https://f0nski.github.io/quartz/install/) or with python3 tools/fm1_install.py quartz-0.9.fwsc. Manual: https://f0nski.github.io/quartz/manual/

QUARTZ 0.8.2

Choose a tag to compare

@F0nski F0nski released this 20 Nov 01:17

In the online manual, a link to a section now lands on it: the pictures declare their size, so the page no longer moves while they load.

The firmware is the same as 0.8 apart from its version: projects saved by 0.8 are kept.

QUARTZ 0.8.1

Choose a tag to compare

@F0nski F0nski released this 20 Nov 01:09

The manual gets a page of its own for the sequencer, and a Pages block after its contents that lists every page: the sequencer, the nine families of models and the ten sources. Each page links back to it. The overview now counts nine generative sources.

The firmware is the same as 0.8 apart from its version: projects saved by 0.8 are kept.

QUARTZ 0.8

Choose a tag to compare

@F0nski F0nski released this 20 Nov 01:04

CIPHER, a new pattern source: bytebeat. At each step a formula of time gives a byte, and its bits decide whether the step plays, its accent and its note (or its pad on a kit). 32 formulas in four families, stepped with PRESET at their advised settings; A, B, C, DENS, LEN, START, SPEED and RANGE to shape them. Its scene draws the loop as points in phase space.

Also in 0.8:

  • ATLAS on a kit: each part plays the pad of your choice (VOICE picks the part, PAD its pad).
  • ENGINE's DECAY is hidden on HEX A-C, WIRE, CHLADNI and the drums, where it did nothing: their MORPH sets how long they ring.
  • The manual has a page for each family of models and each source: what each knob does at its ends, where to start, recipes.

Projects saved by an earlier version are not kept (the project's layout changed).

QUARTZ 0.7

Choose a tag to compare

@F0nski F0nski released this 18 Nov 16:13

When the six voices are busy, a new note now takes a released note first, then its own track's oldest (on a kit, another drum), and only then another track's held note: a kit's hits no longer cut the chords of LATTICE, MOONS or CADENCE.

For developers: tools/device/probe.py reads the cores' load, lost blocks, stolen voices and cut chords over USB-MIDI.

QUARTZ 0.6

Choose a tag to compare

@F0nski F0nski released this 17 Nov 21:35

TAP TEMPO: hold GLO and tap black key 1 on the beat. From the second tap, TEMPO follows the mean gap of your last four taps (whole BPM, 40–240); a pause over 2 s starts the count again. While playing, only the speed changes.

Install: https://f0nski.github.io/quartz/install/

QUARTZ 0.5

Choose a tag to compare

@F0nski F0nski released this 15 Nov 14:32

QUARTZ 0.5 for the M-VAVE FM-1 (package identity FM-1_98000500). IMPROV now starts with no phrase: it stays silent until you teach it one (REC), and the screen says REC TO TEACH. Install with the web installer: https://f0nski.github.io/quartz/install/ — manual: https://f0nski.github.io/quartz/manual/

QUARTZ 0.4

Choose a tag to compare

@F0nski F0nski released this 15 Nov 00:52

QUARTZ 0.4 for the M-VAVE FM-1 (package identity FM-1_98000400). Install with the web installer: https://f0nski.github.io/quartz/install/ — manual: https://f0nski.github.io/quartz/manual/