Repository navigation
Releases
WireTunnels 1.1.0
What's new in 1.1.0
- Redesigned dashboard: one clear look across every screen, with a tunnel Overview (live speed, verdict, recent activity), tabs for Sharing, Network, On-Demand, Safety and Config, and a full-details page.
- Link quality monitoring (optional, off by default): Good / Fair / Poor, latency, packet loss and a latency chart for connected tunnels, with limits you can change.
- AmneziaWG tunnels: bundled and checked by the helper like the WireGuard tools, with a menu to choose the engine (Automatic, WireGuard, AmneziaWG).
- Network Profiles: per Wi-Fi network or Ethernet subnet, set DNS (with a latency test and automatic restore), a proxy (manual or PAC), connect or disconnect tunnels and run a Shortcut. A button flushes the DNS cache.
- Network Doctor and Mesh VPNs: spot conflicting VPNs, routes and DNS, and see and control Tailscale and NetBird.
- Developer Tools: SSH port forwards (local, remote, SOCKS5) that reconnect by themselves, and Wake-on-LAN.
- Notch view (optional): tunnel state and live speeds next to the notch.
- Config checks, Warnings and Log: the editor and import point out problems line by line, Warnings explains each one with a next step, and the Log can be searched and filtered.
- Warning when a server never answers: a connected tunnel that sends data and gets no reply is flagged after 25 seconds.
- Fixes: IPv6-only hostnames now resolve through a full IPv6 tunnel on an IPv4-only network (#45, thanks @bicisteadm); the menu bar icon sits on the same baseline as other icons (#44, thanks @thesnallygaster) and is a coloured badge that stays visible on any menu bar; the Disconnect button is red.
Notes
- Existing installs will be prompted to approve the updated privileged helper on first launch after upgrading.
- Applying DNS or a proxy from a Network Profile needs an administrator.
See CHANGELOG.md for details.
WireTunnels 1.0.9
What's new in 1.0.9
- Warning when a full tunnel leaks IPv4 or IPv6: if a route-all tunnel lets one IP family out over the physical network, the menu bar and dashboard now say so, with a Disable IPv6 shortcut (#39, thanks @007hacky007).
- Routing-loop guard: the endpoint route is set before the catch-all routes and a firewall rule drops looped packets, so the tunnel's own traffic no longer feeds back into it (#42, thanks @007hacky007).
- Security: peer preshared keys are no longer sent to the app (#40, thanks @tobikris); the helper no longer allows unsigned libraries and users can no longer remove each other's split-tunnel and multi-hop routes (#41, thanks @tobikris).
- Fix: the WireGuard tools list in Settings for builds made with Homebrew coreutils (#43, thanks @007hacky007).
Thanks to @tobikris and @007hacky007 for the contributions.
Notes
- Existing installs will be prompted to update the privileged helper on first launch after upgrading.
- The firewall (pf) is now enabled for every tunnel that manages routes, not only with the kill switch.
- Builds signed by another team can't install the tools: the helper requires the app's team ID.
See CHANGELOG.md for details.
WireTunnels 1.0.8
What's new in 1.0.8
- Helper installs the WireGuard tools itself (#35, #34, thanks @tobikris): it copies
wg,wireguard-goandwg-quickonly from the signed app, checks them before every run and replaces any that were modified. No more Install Tools step: approving the helper is enough. - Security: the helper verifies every XPC client by audit token instead of PID (#37, thanks @tobikris), and enforces shared-tunnel permissions and tunnel ownership itself, so a standard user can no longer stop, replace or change tunnels they are not allowed to (#38, thanks @tobikris).
- Ethernet On-Demand rules by subnet: connect at the office dock and stay off at home (#29, thanks @007hacky007).
- Steadier network changes: one scheduler handles network and address changes, and tunnels the rules forbid are no longer restarted after wake (#30, thanks @007hacky007). Tunnel toggles are disabled while connecting (#32, thanks @007hacky007).
- Quit works even if the helper was removed while the app was running (#36, thanks @tobikris).
Thanks to @tobikris and @007hacky007 for the contributions.
Notes
- Existing installs will be prompted to update the privileged helper on first launch after upgrading.
- Builds signed by another team can't install the tools: the helper requires the app's team ID.
See CHANGELOG.md for details.
WireTunnels 1.0.7
What's new in 1.0.7
- Kill switch fixed: it now really blocks traffic outside the tunnel while enabled (its rules were never evaluated before).
- Security: closed wg-quick hook filter bypasses that could run commands as root from a crafted configuration (#25, thanks @tobikris).
- Inventory AllowedIPs: a per-tunnel command can add discovered IPs/CIDRs to AllowedIPs and routes, kept protected outside the VPN (#26, thanks @chocholom).
- Search Domains field for tunnels (#6), duplicate tunnel (#10), monochrome menu bar icon (#16) and an automatic update-check setting (#17).
- Automatic reconnect failures no longer pop up alerts: the menu bar shows connecting, reconnecting or connection lost, with Retry and Details (#18).
- Quitting waits for tunnels to disconnect and DNS to be restored, with Retry/Cancel if cleanup fails (#23).
- DNS only changes on the active network and is repaired after an interrupted setup (#12); helper commands are bounded and traced (#11); tunnels are matched by their live runtime configs (#9).
- Fixed the error after waking from sleep (#27, #13) and the empty editor for shared tunnels (#7, #19).
- Menu closes on outside clicks (#14), tunnel names are preserved (#20), saved metadata is protected from corruption (#21).
Thanks to @007hacky007, @tobikris and @chocholom for the contributions.
Notes
- Existing installs will be prompted to update the privileged helper on first launch after upgrading.
- If you use the kill switch, traffic is now blocked whenever its tunnel is down; turn it off per tunnel if you don't want that.
- If your DNS still points to a VPN-only server from an older version, reset it in System Settings > Network > Details > DNS.
Per-app split tunneling (#5) is deferred to a later version. See CHANGELOG.md for details.
v1.0.6
New features
- Split DNS: send only the domains you choose (for example
lanorcorp.example) to a tunnel's DNS servers, while everything else keeps using your normal DNS. Set it per tunnel from its detail page; administrators can set it on shared tunnels too - Shared tunnels: administrators can now allow or block other users from connecting and/or disconnecting a shared tunnel, from the tunnel's own detail page
- New "Start in Background" setting: skip opening the dashboard window on launch (pairs well with "Hide Dock Icon" for a menu-bar-only app)
- New administrator option to require an admin password to turn off "Launch at Login"
Bug fixes
- Fixed tunnel names longer than 15 characters being rejected when importing a config or saving changes to a profile. Names up to 50 characters now work everywhere, and you always see the name you chose
- Fixed two client profiles for the same server (same server key and port) both showing as connected when only one was running, and the "Invalid or missing tunnel configuration" error when turning the other one off
Notes
- Existing installs will be prompted to update the privileged helper on first launch after upgrading
- If you turn Split DNS on or off for a connected tunnel, you'll be asked whether to reconnect it, since that is when the system-wide DNS is decided
- Split DNS only manages the resolver files it created itself; an existing resolver configuration for the same domain is left untouched
- The administrator Launch-at-Login option only governs WireTunnels' own Settings — it doesn't prevent disabling the login item from System Settings directly
v1.0.5
Version 1.0.5
New features
- Tunnels now automatically reconnect when a peer's dynamic-DNS/IP address changes, instead of going silently dead
Bug fixes
- Fixed an active tunnel not reconnecting after your Mac's local IP renewed via DHCP
- Fixed tunnels not reliably reconnecting or auto-connecting/disconnecting after your Mac wakes from sleep
- Fixed Allowed IPs occasionally getting mixed up between tunnels after reconnecting
- Fixed two tunnels sharing the same server but different ports being incorrectly treated as connected/overlapping together
- Fixed the kill switch toggle silently re-arming itself every time you opened a tunnel's details
- Fixed several multi-hop issues: reconnecting a lone chain member after disconnecting the chain, On-Demand rules disconnecting an individually-connected chain member, stale DNS left behind after disconnecting a chain, and a lost route after sleep/wake
- Multi-hop: a chain member's own On-Demand rule no longer brings up or tears down the whole chain — only that tunnel
- Fixed tunnel names being silently truncated to 15 characters — now up to 50
- Administrators can now edit a shared tunnel's name and config directly, not just replace the whole file
Notes
- Existing installs will be prompted to update the privileged helper on first launch after upgrading
- Multi-hop chains still connect and disconnect as a unit only from the Multi-Hop screen
v1.0.4
What's New in 1.0.4
- Fixed tunnels not reliably reconnecting or auto-connecting/disconnecting after your Mac wakes from sleep
- Fixed Allowed IPs occasionally getting mixed up between tunnels after reconnecting
- Tunnel speed test: optionally set your own URL per tunnel to measure throughput alongside the existing latency check
- Shortcuts support: connect, disconnect, disconnect all, or check which tunnels are connected — from Shortcuts, Siri, or Raycast
- Split tunnel exclusions: exclude specific IP ranges from a tunnel at runtime, without editing the config or reconnecting
- Multi-hop: chain two tunnels together so traffic exits through a second server, hiding your real IP from the exit server
Notes
- The speed test only runs against a URL you set yourself — there is no built-in default host
- Split tunnel exclusions and multi-hop use the same privileged helper mechanism as the existing kill switch — no new permissions beyond what's already required
- Existing installs will be prompted to update the privileged helper on first launch after upgrading (required for the new routing capability)
- Multi-hop chains connect and disconnect as a unit only from the Multi-Hop screen — each tunnel's own On-Demand rule still connects/disconnects just that tunnel, not the chain
- Only the exit tunnel in a multi-hop chain manages your DNS server, so it's correctly restored to your real network's DNS once you disconnect
v1.0.3
WireTunnels 1.0.3
Highlights
- Reliable reconnect after sleep — tunnels now automatically restart after your Mac wakes, instead of the dashboard silently showing "Connected" while traffic has actually stopped.
- Per-tunnel kill switch — block all other network traffic if a tunnel drops unexpectedly, until it reconnects or you turn it off. Works for personal tunnels and for shared tunnels (administrator-controlled).
- QR code import/export — show a tunnel as a QR code to pair a phone with the official WireGuard app in seconds, or import a tunnel by dropping, opening, or pasting a QR code image.
- Live throughput sparkline + connection test — each tunnel row now shows a live throughput sparkline, and the tunnel detail view has an on-demand "Test Connection" button that checks latency to your VPN server.
Notes
- The kill switch enforces its rules via the system packet filter (PF) through the existing privileged helper — no new permissions beyond what's already required.
- The connection test only pings the tunnel's own configured VPN server; it makes no calls to any third-party service, consistent with WireTunnels' no-telemetry design.
- Existing installs will prompt to update the privileged helper on first launch after upgrading (required for the kill switch's new helper capability)
v1.0.2
Version 1.0.2
-
Shared tunnels: administrators can create tunnels visible to every user on the Mac, control who's allowed to connect or disconnect, and see who's currently connected
-
On-Demand rules can now connect and disconnect on different Wi-Fi networks independently, instead of a single action per tunnel
-
Pick Wi-Fi networks for On-Demand rules from a list of known networks, or type one manually
-
Shared tunnel changes now ask for your admin password once per session instead of every time
-
Added a "Hide Dock Icon" option in Settings for menu-bar-only use
-
Fixed On-Demand rules for specific Wi-Fi networks not triggering (this needed Location permission to read the current network name)